! Started logfile: /scr/pima/bg219b_uvs/J1740+2211_X_dfm.log on Thu May 19 20:29:10 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1740+2211_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1740+2211_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.886508 visibilities/baseline/integration-bin.
! Found source: J1740+2211
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13404 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1740+2211_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.149307Jy  sigma=24.396336
! Fit after  self-cal, rms=0.423368Jy  sigma=8.958322
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7488 mas, bmaj=1.464 mas, bpa=-2.872 degrees
! Estimated noise=0.559829 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.445857 Jy
! Component: 100  -  total flux cleaned = 0.543224 Jy
! Total flux subtracted in 100 components = 0.543224 Jy
! Clean residual min=-0.010780 max=0.028740 Jy/beam
! Clean residual mean=-0.000015 rms=0.002800 Jy/beam
! Combined flux in latest and established models = 0.543224 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.543224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092119Jy  sigma=1.896556
! Fit after  self-cal, rms=0.092108Jy  sigma=1.896394
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0304146 Jy
! Component: 100  -  total flux cleaned = 0.0465709 Jy
! Total flux subtracted in 100 components = 0.0465709 Jy
! Clean residual min=-0.007885 max=0.008823 Jy/beam
! Clean residual mean=-0.000013 rms=0.001851 Jy/beam
! Combined flux in latest and established models = 0.589795 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 14 components and 0.589795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077932Jy  sigma=1.581518
! Fit after  self-cal, rms=0.077928Jy  sigma=1.581383
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9568 mas, bmaj=1.789 mas, bpa=-1.386 degrees
! Estimated noise=0.321225 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0139763 Jy
! Component: 100  -  total flux cleaned = 0.0223106 Jy
! Component: 150  -  total flux cleaned = 0.0276883 Jy
! Component: 200  -  total flux cleaned = 0.0312009 Jy
! Total flux subtracted in 200 components = 0.0312009 Jy
! Clean residual min=-0.008746 max=0.011848 Jy/beam
! Clean residual mean=-0.000038 rms=0.001943 Jy/beam
! Combined flux in latest and established models = 0.620995 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 49 components and 0.620995 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075114Jy  sigma=1.523713
! Fit after  self-cal, rms=0.075110Jy  sigma=1.523458
! Inverting map 
! Added new window around map position (1.4, 5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120904 Jy
! Component: 100  -  total flux cleaned = 0.0186196 Jy
! Component: 150  -  total flux cleaned = 0.0227788 Jy
! Component: 200  -  total flux cleaned = 0.0253872 Jy
! Total flux subtracted in 200 components = 0.0253872 Jy
! Clean residual min=-0.007137 max=0.007250 Jy/beam
! Clean residual mean=-0.000024 rms=0.001526 Jy/beam
! Combined flux in latest and established models = 0.646383 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 68 components and 0.646383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073121Jy  sigma=1.480033
! Fit after  self-cal, rms=0.072965Jy  sigma=1.475555
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9568 x 1.789 at -1.386 degrees (North through East)
! Clean map  min=-0.006604  max=0.57949 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.04     KP        0.97     
!   LA        0.99     MK        1.01     NL        1.02     OV        0.98     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     HN        1.04     KP        1.00     
!   LA        1.01     MK        1.06     NL        1.03     OV        1.02     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        1.05     KP        1.03     
!   LA        1.03     MK        1.06     NL        1.06     OV        1.02     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.02     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.02     OV        0.98     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.02     KP        0.99     
!   LA        0.97     MK        1.00     NL        1.00     OV        0.99     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.02     KP        1.01     
!   LA        0.99     MK        1.04     NL        1.05     OV        1.00     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        1.04     KP        1.03     
!   LA        1.02     MK        1.07     NL        1.05     OV        1.02     
!   PT        1.00     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.02     KP        1.02     
!   LA        0.98     MK        1.04     NL        1.01     OV        0.98     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00     KP        1.00     
!   LA        0.97     MK        1.03     NL        1.03     OV        0.99     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.98     KP        0.98     
!   LA        0.95     MK        1.02     NL        1.00     OV        0.97     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.00     KP        0.96     
!   LA        0.95     MK        1.02     NL        1.00     OV        0.98     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.94     HN        0.97     KP        0.96     
!   LA        0.95     MK        1.00     NL        0.96     OV        0.93     
!   PT        0.92     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.072965Jy  sigma=1.475555
! Fit after  self-cal, rms=0.066212Jy  sigma=1.329071
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.965 mas, bmaj=1.798 mas, bpa=-1.099 degrees
! Estimated noise=0.321976 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.6, 6.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00772241 Jy
! Component: 100  -  total flux cleaned = 0.0113778 Jy
! Component: 150  -  total flux cleaned = 0.0124224 Jy
! Component: 200  -  total flux cleaned = 0.0126258 Jy
! Total flux subtracted in 200 components = 0.0126258 Jy
! Clean residual min=-0.003653 max=0.003560 Jy/beam
! Clean residual mean=-0.000007 rms=0.000773 Jy/beam
! Combined flux in latest and established models = 0.659008 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 103 components and 0.659008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065235Jy  sigma=1.306387
! Fit after  self-cal, rms=0.065206Jy  sigma=1.305531
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065206Jy  sigma=1.305531
! Fit after  self-cal, rms=0.064695Jy  sigma=1.292277
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9643 mas, bmaj=1.795 mas, bpa=-1.318 degrees
! Estimated noise=0.321566 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000640352 Jy
! Component: 100  -  total flux cleaned = 0.000569321 Jy
! Component: 150  -  total flux cleaned = 0.000441605 Jy
! Component: 200  -  total flux cleaned = 0.000326641 Jy
! Total flux subtracted in 200 components = 0.000326641 Jy
! Clean residual min=-0.002653 max=0.003114 Jy/beam
! Clean residual mean=-0.000003 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.659335 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 127 components and 0.659335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064562Jy  sigma=1.289377
! Fit after  self-cal, rms=0.064564Jy  sigma=1.289323
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.8, 6.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0018057 Jy
! Component: 100  -  total flux cleaned = 0.0021057 Jy
! Component: 150  -  total flux cleaned = 0.00200632 Jy
! Component: 200  -  total flux cleaned = 0.00173138 Jy
! Total flux subtracted in 200 components = 0.00173138 Jy
! Clean residual min=-0.002421 max=0.002569 Jy/beam
! Clean residual mean=-0.000002 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.661066 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 142 components and 0.661066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064425Jy  sigma=1.286554
! Fit after  self-cal, rms=0.064420Jy  sigma=1.286440
! Inverting map 
! Added new window around map position (13.4, 41).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00220512 Jy
! Component: 100  -  total flux cleaned = 0.00242095 Jy
! Component: 150  -  total flux cleaned = 0.00237163 Jy
! Component: 200  -  total flux cleaned = 0.00250465 Jy
! Total flux subtracted in 200 components = 0.00250465 Jy
! Clean residual min=-0.002371 max=0.002352 Jy/beam
! Clean residual mean=-0.000001 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 0.663571 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 163 components and 0.663571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064314Jy  sigma=1.284300
! Fit after  self-cal, rms=0.064311Jy  sigma=1.284223
! Inverting map 
! Added new window around map position (2, 10).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104427 Jy
! Component: 100  -  total flux cleaned = 0.00103231 Jy
! Component: 150  -  total flux cleaned = 0.00112477 Jy
! Component: 200  -  total flux cleaned = 0.00124793 Jy
! Total flux subtracted in 200 components = 0.00124793 Jy
! Clean residual min=-0.002166 max=0.002097 Jy/beam
! Clean residual mean=-0.000001 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.664819 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 183 components and 0.664818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064216Jy  sigma=1.282404
! Fit after  self-cal, rms=0.064216Jy  sigma=1.282360
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064216Jy  sigma=1.282360
! Fit after  self-cal, rms=0.064181Jy  sigma=1.281955
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9646 mas, bmaj=1.795 mas, bpa=-1.325 degrees
! Estimated noise=0.321277 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000150154 Jy
! Component: 100  -  total flux cleaned = -6.2199e-05 Jy
! Component: 150  -  total flux cleaned = -2.25301e-05 Jy
! Component: 200  -  total flux cleaned = -5.88487e-05 Jy
! Total flux subtracted in 200 components = -5.88487e-05 Jy
! Clean residual min=-0.002001 max=0.002137 Jy/beam
! Clean residual mean=-0.000001 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.66476 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 192 components and 0.66476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064133Jy  sigma=1.280969
! Fit after  self-cal, rms=0.064133Jy  sigma=1.280954
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (20.8, -22.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00143482 Jy
! Component: 100  -  total flux cleaned = 0.00189277 Jy
! Component: 150  -  total flux cleaned = 0.00219447 Jy
! Component: 200  -  total flux cleaned = 0.00226478 Jy
! Total flux subtracted in 200 components = 0.00226478 Jy
! Clean residual min=-0.001899 max=0.001711 Jy/beam
! Clean residual mean=-0.000000 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.667024 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 211 components and 0.667024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064058Jy  sigma=1.279448
! Fit after  self-cal, rms=0.064056Jy  sigma=1.279412
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064056Jy  sigma=1.279412
! Fit after  self-cal, rms=0.064024Jy  sigma=1.279247
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.08 mas, bmaj=2.792 mas, bpa=-3.956 degrees
! Estimated noise=0.396565 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00020924 Jy
! Component: 100  -  total flux cleaned = -0.000131679 Jy
! Component: 150  -  total flux cleaned = -0.000162932 Jy
! Component: 200  -  total flux cleaned = -0.000314951 Jy
! Total flux subtracted in 200 components = -0.000314951 Jy
! Clean residual min=-0.001723 max=0.002012 Jy/beam
! Clean residual mean=-0.000002 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.666709 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 232 components and 0.666709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064004Jy  sigma=1.278713
! Fit after  self-cal, rms=0.064003Jy  sigma=1.278690
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.00695e-05 Jy
! Component: 100  -  total flux cleaned = 6.34356e-05 Jy
! Component: 150  -  total flux cleaned = 6.32972e-05 Jy
! Component: 200  -  total flux cleaned = 6.17748e-05 Jy
! Total flux subtracted in 200 components = 6.17748e-05 Jy
! Clean residual min=-0.001679 max=0.001935 Jy/beam
! Clean residual mean=-0.000001 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.666771 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 240 components and 0.666771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063993Jy  sigma=1.278448
! Fit after  self-cal, rms=0.063992Jy  sigma=1.278440
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.965 mas, bmaj=1.796 mas, bpa=-1.314 degrees
! Estimated noise=0.321056 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.965 x 1.796 at -1.314 degrees (North through East)
! Clean map  min=-0.0022987  max=0.57955 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063992Jy  sigma=1.278440
! Fit after  self-cal, rms=0.060520Jy  sigma=1.200365
! Inverting map and beam 
! Estimated beam: bmin=0.9647 mas, bmaj=1.795 mas, bpa=-1.263 degrees
! Estimated noise=0.319428 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00224867 Jy
! Component: 100  -  total flux cleaned = -0.00351702 Jy
! Component: 150  -  total flux cleaned = -0.0040319 Jy
! Component: 200  -  total flux cleaned = -0.00445126 Jy
! Total flux subtracted in 200 components = -0.00445126 Jy
! Clean residual min=-0.001866 max=0.001802 Jy/beam
! Clean residual mean=-0.000000 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.66232 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 253 components and 0.66232 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060412Jy  sigma=1.198238
! Fit after  self-cal, rms=0.060412Jy  sigma=1.198211
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000259213 Jy
! Component: 100  -  total flux cleaned = -0.000423856 Jy
! Component: 150  -  total flux cleaned = -0.000546468 Jy
! Component: 200  -  total flux cleaned = -0.000634406 Jy
! Total flux subtracted in 200 components = -0.000634406 Jy
! Clean residual min=-0.001724 max=0.001761 Jy/beam
! Clean residual mean=-0.000001 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.661686 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 266 components and 0.661686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060380Jy  sigma=1.197639
! Fit after  self-cal, rms=0.060380Jy  sigma=1.197628
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060380Jy  sigma=1.197628
! Fit after  self-cal, rms=0.060172Jy  sigma=1.196617
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7537 mas, bmaj=1.466 mas, bpa=-2.653 degrees
! Estimated noise=0.55649 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.443159 Jy
! Component: 100  -  total flux cleaned = 0.539868 Jy
! Component: 150  -  total flux cleaned = 0.56783 Jy
! Component: 200  -  total flux cleaned = 0.582399 Jy
! Total flux subtracted in 200 components = 0.582399 Jy
! Clean residual min=-0.005320 max=0.007562 Jy/beam
! Clean residual mean=-0.000012 rms=0.001394 Jy/beam
! Combined flux in latest and established models = 0.582399 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.582399 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9651 mas, bmaj=1.795 mas, bpa=-1.225 degrees
! Estimated noise=0.31831 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0150864 Jy
! Component: 100  -  total flux cleaned = 0.0251801 Jy
! Component: 150  -  total flux cleaned = 0.0327568 Jy
! Component: 200  -  total flux cleaned = 0.0388409 Jy
! Total flux subtracted in 200 components = 0.0388409 Jy
! Clean residual min=-0.003486 max=0.004119 Jy/beam
! Clean residual mean=-0.000018 rms=0.000981 Jy/beam
! Combined flux in latest and established models = 0.62124 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 48 components and 0.62124 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.079 mas, bmaj=2.791 mas, bpa=-4.051 degrees
! Estimated noise=0.393362 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00860386 Jy
! Component: 100  -  total flux cleaned = 0.014571 Jy
! Component: 150  -  total flux cleaned = 0.0190751 Jy
! Component: 200  -  total flux cleaned = 0.0226076 Jy
! Total flux subtracted in 200 components = 0.0226076 Jy
! Clean residual min=-0.002726 max=0.003436 Jy/beam
! Clean residual mean=-0.000016 rms=0.000880 Jy/beam
! Combined flux in latest and established models = 0.643848 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.002884 Jy
! Component: 100  -  total flux cleaned = 0.00507754 Jy
! Component: 150  -  total flux cleaned = 0.00681487 Jy
! Component: 200  -  total flux cleaned = 0.00833806 Jy
! Total flux subtracted in 200 components = 0.00833806 Jy
! Clean residual min=-0.002230 max=0.002684 Jy/beam
! Clean residual mean=-0.000008 rms=0.000698 Jy/beam
! Combined flux in latest and established models = 0.652186 Jy
! Adding 82 model components to the UV plane model.
! The established model now contains 116 components and 0.652186 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9651 mas, bmaj=1.795 mas, bpa=-1.225 degrees
! Estimated noise=0.31831 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107647 Jy
! Component: 100  -  total flux cleaned = 0.00175087 Jy
! Component: 150  -  total flux cleaned = 0.00228398 Jy
! Component: 200  -  total flux cleaned = 0.00270382 Jy
! Total flux subtracted in 200 components = 0.00270382 Jy
! Clean residual min=-0.002356 max=0.002422 Jy/beam
! Clean residual mean=-0.000002 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.65489 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 137 components and 0.65489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060458Jy  sigma=1.201908
! Fit after  self-cal, rms=0.060442Jy  sigma=1.201635
wmodel /J1740+2211_X_map.mod
! wmodel: Unable to open new model file: /J1740+2211_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1740+2211_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9651 x 1.795 at -1.225 degrees (North through East)
! Clean map  min=-0.0021889  max=0.57652 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1740+2211_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.576525 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000523768 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.272548 0.272548 0.545095 1.09019 2.18038 4.36076 8.72152 17.443 34.8861 69.7722
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.576 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1100.72 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1740+2211_X_dfm.log closed on Thu May 19 20:29:13 2016