! Started logfile: /scr/pima/bg219b_uvs/J1722+2815_X_dfm.log on Thu May 19 20:28:45 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1722+2815_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1722+2815_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.887037 visibilities/baseline/integration-bin.
! Found source: J1722+2815
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17244 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1722+2815_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.029761Jy  sigma=25.222762
! Fit after  self-cal, rms=0.788910Jy  sigma=19.273950
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7516 mas, bmaj=1.395 mas, bpa=-0.7488 degrees
! Estimated noise=0.44393 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.156645 Jy
! Component: 100  -  total flux cleaned = 0.198364 Jy
! Total flux subtracted in 100 components = 0.198364 Jy
! Clean residual min=-0.007412 max=0.016623 Jy/beam
! Clean residual mean=-0.000005 rms=0.001829 Jy/beam
! Combined flux in latest and established models = 0.198364 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.198364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072131Jy  sigma=1.700772
! Fit after  self-cal, rms=0.071961Jy  sigma=1.695895
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0174667 Jy
! Component: 100  -  total flux cleaned = 0.0268018 Jy
! Total flux subtracted in 100 components = 0.0268018 Jy
! Clean residual min=-0.005799 max=0.015359 Jy/beam
! Clean residual mean=-0.000004 rms=0.001357 Jy/beam
! Combined flux in latest and established models = 0.225166 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 20 components and 0.225166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065641Jy  sigma=1.525279
! Fit after  self-cal, rms=0.065597Jy  sigma=1.524107
! Inverting map 
! Added new window around map position (-1.2, -1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126997 Jy
! Component: 100  -  total flux cleaned = 0.0190999 Jy
! Total flux subtracted in 100 components = 0.0190999 Jy
! Clean residual min=-0.004509 max=0.004382 Jy/beam
! Clean residual mean=-0.000003 rms=0.001014 Jy/beam
! Combined flux in latest and established models = 0.244265 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 26 components and 0.244265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062603Jy  sigma=1.445996
! Fit after  self-cal, rms=0.062415Jy  sigma=1.442037
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9704 mas, bmaj=1.734 mas, bpa=0.6336 degrees
! Estimated noise=0.240694 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00746048 Jy
! Component: 100  -  total flux cleaned = 0.0121012 Jy
! Component: 150  -  total flux cleaned = 0.0152614 Jy
! Component: 200  -  total flux cleaned = 0.0175037 Jy
! Total flux subtracted in 200 components = 0.0175037 Jy
! Clean residual min=-0.002952 max=0.003634 Jy/beam
! Clean residual mean=-0.000006 rms=0.000733 Jy/beam
! Combined flux in latest and established models = 0.261769 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 55 components and 0.261769 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061433Jy  sigma=1.415980
! Fit after  self-cal, rms=0.061402Jy  sigma=1.415151
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9704 x 1.734 at 0.6336 degrees (North through East)
! Clean map  min=-0.0026564  max=0.20825 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.04     KP        1.00     
!   LA        0.98     MK        1.00     NL        1.01     OV        0.98     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.06     KP        1.02     
!   LA        1.01     MK        1.04     NL        1.04     OV        1.02     
!   PT        0.99     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.08     KP        1.06     
!   LA        0.98     MK        1.05     NL        1.05     OV        1.02     
!   PT        0.99     SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.01     KP        1.02     
!   LA        1.00     MK        1.01     NL        1.02     OV        0.98     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.94     HN        1.03     KP        1.02     
!   LA        0.97     MK        0.99     NL        1.02     OV        0.98     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.02     KP        1.02     
!   LA        1.00     MK        1.07     NL        1.02     OV        0.99     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.06     KP        1.08     
!   LA        1.01     MK        1.06     NL        1.04     OV        1.04     
!   PT        1.01     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.00     KP        1.02     
!   LA        0.97     MK        1.05     NL        1.01     OV        0.99     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.02     KP        1.00     
!   LA        0.96     MK        1.05     NL        1.02     OV        1.00     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.95     HN        0.99     KP        0.99     
!   LA        0.95     MK        0.99     NL        0.97     OV        0.98     
!   PT        0.94     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.02     KP        0.99     
!   LA        0.95     MK        1.00     NL        0.98     OV        0.98     
!   PT        0.94     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.94     HN        0.92     KP        0.98     
!   LA        0.94     MK        0.96     NL        0.95     OV        0.95     
!   PT        0.89     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.061402Jy  sigma=1.415151
! Fit after  self-cal, rms=0.059835Jy  sigma=1.382331
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9791 mas, bmaj=1.747 mas, bpa=0.6704 degrees
! Estimated noise=0.240846 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8.2, -4.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00322065 Jy
! Component: 100  -  total flux cleaned = 0.00456306 Jy
! Component: 150  -  total flux cleaned = 0.00536201 Jy
! Component: 200  -  total flux cleaned = 0.00574669 Jy
! Total flux subtracted in 200 components = 0.00574669 Jy
! Clean residual min=-0.001963 max=0.001964 Jy/beam
! Clean residual mean=-0.000003 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.267516 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 78 components and 0.267516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059651Jy  sigma=1.377598
! Fit after  self-cal, rms=0.059650Jy  sigma=1.377119
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059650Jy  sigma=1.377119
! Fit after  self-cal, rms=0.059399Jy  sigma=1.373385
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9779 mas, bmaj=1.744 mas, bpa=0.5382 degrees
! Estimated noise=0.240259 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000354904 Jy
! Component: 100  -  total flux cleaned = 0.000732063 Jy
! Component: 150  -  total flux cleaned = 0.000847097 Jy
! Component: 200  -  total flux cleaned = 0.000950354 Jy
! Total flux subtracted in 200 components = 0.000950354 Jy
! Clean residual min=-0.001809 max=0.001933 Jy/beam
! Clean residual mean=-0.000002 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.268466 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 86 components and 0.268466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059364Jy  sigma=1.372653
! Fit after  self-cal, rms=0.059364Jy  sigma=1.372574
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3, -3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0018339 Jy
! Component: 100  -  total flux cleaned = 0.00247798 Jy
! Component: 150  -  total flux cleaned = 0.00285065 Jy
! Component: 200  -  total flux cleaned = 0.00302678 Jy
! Total flux subtracted in 200 components = 0.00302678 Jy
! Clean residual min=-0.001808 max=0.001673 Jy/beam
! Clean residual mean=-0.000001 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.271493 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 106 components and 0.271493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059299Jy  sigma=1.370820
! Fit after  self-cal, rms=0.059289Jy  sigma=1.370579
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059289Jy  sigma=1.370579
! Fit after  self-cal, rms=0.059225Jy  sigma=1.370476
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.978 mas, bmaj=1.743 mas, bpa=0.5516 degrees
! Estimated noise=0.240015 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000615962 Jy
! Component: 100  -  total flux cleaned = 0.00105039 Jy
! Component: 150  -  total flux cleaned = 0.00128984 Jy
! Component: 200  -  total flux cleaned = 0.00138392 Jy
! Total flux subtracted in 200 components = 0.00138392 Jy
! Clean residual min=-0.001706 max=0.001672 Jy/beam
! Clean residual mean=-0.000001 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.272877 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 115 components and 0.272877 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059198Jy  sigma=1.369769
! Fit after  self-cal, rms=0.059193Jy  sigma=1.369682
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.6, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105483 Jy
! Component: 100  -  total flux cleaned = 0.00115695 Jy
! Component: 150  -  total flux cleaned = 0.00134174 Jy
! Component: 200  -  total flux cleaned = 0.00136489 Jy
! Total flux subtracted in 200 components = 0.00136489 Jy
! Clean residual min=-0.001534 max=0.001473 Jy/beam
! Clean residual mean=-0.000001 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.274242 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 133 components and 0.274242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059153Jy  sigma=1.368527
! Fit after  self-cal, rms=0.059150Jy  sigma=1.368467
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059150Jy  sigma=1.368467
! Fit after  self-cal, rms=0.059131Jy  sigma=1.368329
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.107 mas, bmaj=2.815 mas, bpa=3.88 degrees
! Estimated noise=0.292859 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00045442 Jy
! Component: 100  -  total flux cleaned = 0.000506529 Jy
! Component: 150  -  total flux cleaned = 0.000550677 Jy
! Component: 200  -  total flux cleaned = 0.00054911 Jy
! Total flux subtracted in 200 components = 0.00054911 Jy
! Clean residual min=-0.001330 max=0.001690 Jy/beam
! Clean residual mean=-0.000001 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.274791 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 149 components and 0.274791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059122Jy  sigma=1.368013
! Fit after  self-cal, rms=0.059120Jy  sigma=1.367977
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.2, 35).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000831882 Jy
! Component: 100  -  total flux cleaned = 0.00111465 Jy
! Component: 150  -  total flux cleaned = 0.00137539 Jy
! Component: 200  -  total flux cleaned = 0.00149883 Jy
! Total flux subtracted in 200 components = 0.00149883 Jy
! Clean residual min=-0.001249 max=0.001304 Jy/beam
! Clean residual mean=-0.000002 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.27629 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 176 components and 0.27629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059087Jy  sigma=1.367140
! Fit after  self-cal, rms=0.059086Jy  sigma=1.367099
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9782 mas, bmaj=1.743 mas, bpa=0.5696 degrees
! Estimated noise=0.239849 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9782 x 1.743 at 0.5696 degrees (North through East)
! Clean map  min=-0.0012886  max=0.20739 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7572 mas, bmaj=1.404 mas, bpa=-0.8221 degrees
! Estimated noise=0.44317 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.156225 Jy
! Component: 100  -  total flux cleaned = 0.198381 Jy
! Component: 150  -  total flux cleaned = 0.217942 Jy
! Component: 200  -  total flux cleaned = 0.229725 Jy
! Total flux subtracted in 200 components = 0.229725 Jy
! Clean residual min=-0.004236 max=0.006195 Jy/beam
! Clean residual mean=-0.000003 rms=0.001027 Jy/beam
! Combined flux in latest and established models = 0.229725 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.229725 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9782 mas, bmaj=1.743 mas, bpa=0.5696 degrees
! Estimated noise=0.239849 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113374 Jy
! Component: 100  -  total flux cleaned = 0.0178819 Jy
! Component: 150  -  total flux cleaned = 0.0225069 Jy
! Component: 200  -  total flux cleaned = 0.0261053 Jy
! Total flux subtracted in 200 components = 0.0261053 Jy
! Clean residual min=-0.001951 max=0.002267 Jy/beam
! Clean residual mean=-0.000006 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.25583 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 50 components and 0.25583 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.107 mas, bmaj=2.815 mas, bpa=3.88 degrees
! Estimated noise=0.292859 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00471205 Jy
! Component: 100  -  total flux cleaned = 0.00793318 Jy
! Component: 150  -  total flux cleaned = 0.0103491 Jy
! Component: 200  -  total flux cleaned = 0.0122748 Jy
! Total flux subtracted in 200 components = 0.0122748 Jy
! Clean residual min=-0.001611 max=0.001556 Jy/beam
! Clean residual mean=-0.000006 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.268105 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0015669 Jy
! Component: 100  -  total flux cleaned = 0.00271715 Jy
! Component: 150  -  total flux cleaned = 0.00348604 Jy
! Component: 200  -  total flux cleaned = 0.00412631 Jy
! Total flux subtracted in 200 components = 0.00412631 Jy
! Clean residual min=-0.001358 max=0.001226 Jy/beam
! Clean residual mean=-0.000005 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.272231 Jy
! Adding 101 model components to the UV plane model.
! The established model now contains 139 components and 0.272231 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9782 mas, bmaj=1.743 mas, bpa=0.5696 degrees
! Estimated noise=0.239849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000709144 Jy
! Component: 100  -  total flux cleaned = 0.000976815 Jy
! Component: 150  -  total flux cleaned = 0.00113238 Jy
! Component: 200  -  total flux cleaned = 0.00123847 Jy
! Total flux subtracted in 200 components = 0.00123847 Jy
! Clean residual min=-0.001450 max=0.001472 Jy/beam
! Clean residual mean=-0.000001 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.27347 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 163 components and 0.27347 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059139Jy  sigma=1.368280
! Fit after  self-cal, rms=0.059121Jy  sigma=1.368017
wmodel /J1722+2815_X_map.mod
! wmodel: Unable to open new model file: /J1722+2815_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1722+2815_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9782 x 1.743 at 0.5696 degrees (North through East)
! Clean map  min=-0.0013389  max=0.20826 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1722+2815_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.208256 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000315967 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.455161 0.455161 0.910322 1.82064 3.64129 7.28258 14.5652 29.1303 58.2606
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.208 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  659.107 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1722+2815_X_dfm.log closed on Thu May 19 20:28:48 2016