! Started logfile: /scr/pima/bg219b_uvs/J1722+1013_X_dfm.log on Thu May 19 20:28:27 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1722+1013_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1722+1013_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.896032 visibilities/baseline/integration-bin.
! Found source: J1722+1013
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13548 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1722+1013_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.065541Jy  sigma=24.311865
! Fit after  self-cal, rms=0.640082Jy  sigma=14.648428
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6837 mas, bmaj=1.722 mas, bpa=-1.684 degrees
! Estimated noise=0.457741 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.275277 Jy
! Component: 100  -  total flux cleaned = 0.336363 Jy
! Total flux subtracted in 100 components = 0.336363 Jy
! Clean residual min=-0.010611 max=0.020555 Jy/beam
! Clean residual mean=-0.000007 rms=0.002128 Jy/beam
! Combined flux in latest and established models = 0.336363 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.336363 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079565Jy  sigma=1.752550
! Fit after  self-cal, rms=0.079561Jy  sigma=1.752415
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0226584 Jy
! Component: 100  -  total flux cleaned = 0.0344611 Jy
! Total flux subtracted in 100 components = 0.0344611 Jy
! Clean residual min=-0.006640 max=0.015812 Jy/beam
! Clean residual mean=-0.000005 rms=0.001519 Jy/beam
! Combined flux in latest and established models = 0.370824 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.370824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070728Jy  sigma=1.542791
! Fit after  self-cal, rms=0.070727Jy  sigma=1.542678
! Inverting map 
! Added new window around map position (-2, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0148741 Jy
! Component: 100  -  total flux cleaned = 0.0231224 Jy
! Total flux subtracted in 100 components = 0.0231224 Jy
! Clean residual min=-0.005243 max=0.006192 Jy/beam
! Clean residual mean=-0.000003 rms=0.001127 Jy/beam
! Combined flux in latest and established models = 0.393947 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 25 components and 0.393947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066164Jy  sigma=1.434949
! Fit after  self-cal, rms=0.065866Jy  sigma=1.427044
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00705029 Jy
! Component: 100  -  total flux cleaned = 0.012006 Jy
! Total flux subtracted in 100 components = 0.012006 Jy
! Clean residual min=-0.004292 max=0.004002 Jy/beam
! Clean residual mean=-0.000002 rms=0.000938 Jy/beam
! Combined flux in latest and established models = 0.405953 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 37 components and 0.405953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064591Jy  sigma=1.397731
! Fit after  self-cal, rms=0.064551Jy  sigma=1.396556
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8373 mas, bmaj=1.992 mas, bpa=-2.496 degrees
! Estimated noise=0.295847 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00663492 Jy
! Component: 100  -  total flux cleaned = 0.0109309 Jy
! Component: 150  -  total flux cleaned = 0.0141178 Jy
! Component: 200  -  total flux cleaned = 0.0165299 Jy
! Total flux subtracted in 200 components = 0.0165299 Jy
! Clean residual min=-0.003257 max=0.004236 Jy/beam
! Clean residual mean=-0.000004 rms=0.000808 Jy/beam
! Combined flux in latest and established models = 0.422483 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 62 components and 0.422483 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063670Jy  sigma=1.377863
! Fit after  self-cal, rms=0.063628Jy  sigma=1.376583
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8373 x 1.992 at -2.496 degrees (North through East)
! Clean map  min=-0.0029312  max=0.35759 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.03     KP        0.99     
!   LA        0.98     MK        0.97     NL        1.06     OV        0.98     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.04     HN        1.02     KP        1.01     
!   LA        0.99     MK        1.02     NL        1.05     OV        1.02     
!   PT        1.02     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        1.07     KP        1.05     
!   LA        1.00     MK        1.03     NL        1.07     OV        1.04     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.00     KP        1.00     
!   LA        0.99     MK        0.98     NL        1.03     OV        0.99     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.01     KP        0.98     
!   LA        0.97     MK        0.98     NL        1.01     OV        0.99     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.03     KP        1.01     
!   LA        0.98     MK        1.02     NL        1.06     OV        0.99     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.00     KP        1.04     
!   LA        1.03     MK        1.04     NL        1.05     OV        1.02     
!   PT        1.01     SC        1.06     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.99     KP        1.00     
!   LA        0.98     MK        1.02     NL        1.03     OV        0.98     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.98     KP        0.99     
!   LA        0.97     MK        1.03     NL        1.05     OV        1.00     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        0.98     KP        0.98     
!   LA        0.94     MK        0.99     NL        1.00     OV        0.97     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.01     KP        0.95     
!   LA        0.95     MK        1.02     NL        1.01     OV        0.99     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.95     HN        0.95     KP        0.96     
!   LA        0.95     MK        0.99     NL        0.97     OV        0.93     
!   PT        0.93     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.063628Jy  sigma=1.376583
! Fit after  self-cal, rms=0.060300Jy  sigma=1.308211
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8409 mas, bmaj=2 mas, bpa=-2.487 degrees
! Estimated noise=0.296145 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.8, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00247853 Jy
! Component: 100  -  total flux cleaned = 0.00296126 Jy
! Component: 150  -  total flux cleaned = 0.00320234 Jy
! Component: 200  -  total flux cleaned = 0.00323464 Jy
! Total flux subtracted in 200 components = 0.00323464 Jy
! Clean residual min=-0.001795 max=0.001948 Jy/beam
! Clean residual mean=-0.000001 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.425717 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 81 components and 0.425718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060150Jy  sigma=1.304702
! Fit after  self-cal, rms=0.060146Jy  sigma=1.304397
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060146Jy  sigma=1.304397
! Fit after  self-cal, rms=0.059922Jy  sigma=1.298254
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8407 mas, bmaj=1.999 mas, bpa=-2.533 degrees
! Estimated noise=0.295771 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104188 Jy
! Component: 100  -  total flux cleaned = 0.00119817 Jy
! Component: 150  -  total flux cleaned = 0.00125829 Jy
! Component: 200  -  total flux cleaned = 0.0012594 Jy
! Total flux subtracted in 200 components = 0.0012594 Jy
! Clean residual min=-0.001421 max=0.001542 Jy/beam
! Clean residual mean=-0.000001 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.426977 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 94 components and 0.426977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059877Jy  sigma=1.297238
! Fit after  self-cal, rms=0.059876Jy  sigma=1.297148
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (27.6, 7.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133585 Jy
! Component: 100  -  total flux cleaned = 0.00175134 Jy
! Component: 150  -  total flux cleaned = 0.00182776 Jy
! Component: 200  -  total flux cleaned = 0.00187447 Jy
! Total flux subtracted in 200 components = 0.00187447 Jy
! Clean residual min=-0.001362 max=0.001452 Jy/beam
! Clean residual mean=-0.000001 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.428851 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 118 components and 0.428851 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059836Jy  sigma=1.296356
! Fit after  self-cal, rms=0.059835Jy  sigma=1.296293
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059835Jy  sigma=1.296293
! Fit after  self-cal, rms=0.059833Jy  sigma=1.296164
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8412 mas, bmaj=1.999 mas, bpa=-2.531 degrees
! Estimated noise=0.295667 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000321818 Jy
! Component: 100  -  total flux cleaned = 0.000448039 Jy
! Component: 150  -  total flux cleaned = 0.000448804 Jy
! Component: 200  -  total flux cleaned = 0.000448458 Jy
! Total flux subtracted in 200 components = 0.000448458 Jy
! Clean residual min=-0.001354 max=0.001424 Jy/beam
! Clean residual mean=-0.000001 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.4293 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 128 components and 0.4293 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059815Jy  sigma=1.295803
! Fit after  self-cal, rms=0.059815Jy  sigma=1.295790
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000103605 Jy
! Component: 100  -  total flux cleaned = 0.000104391 Jy
! Component: 150  -  total flux cleaned = 0.000105006 Jy
! Component: 200  -  total flux cleaned = 0.000122426 Jy
! Total flux subtracted in 200 components = 0.000122426 Jy
! Clean residual min=-0.001326 max=0.001396 Jy/beam
! Clean residual mean=-0.000001 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.429422 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 131 components and 0.429422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059804Jy  sigma=1.295589
! Fit after  self-cal, rms=0.059804Jy  sigma=1.295585
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059804Jy  sigma=1.295585
! Fit after  self-cal, rms=0.059796Jy  sigma=1.295543
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.065 mas, bmaj=3.038 mas, bpa=-2.063 degrees
! Estimated noise=0.383602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000579281 Jy
! Component: 100  -  total flux cleaned = -0.000725276 Jy
! Component: 150  -  total flux cleaned = -0.00078339 Jy
! Component: 200  -  total flux cleaned = -0.000823318 Jy
! Total flux subtracted in 200 components = -0.000823318 Jy
! Clean residual min=-0.001733 max=0.001727 Jy/beam
! Clean residual mean=-0.000002 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.428599 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 147 components and 0.428599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059793Jy  sigma=1.295463
! Fit after  self-cal, rms=0.059793Jy  sigma=1.295452
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.31049e-05 Jy
! Component: 100  -  total flux cleaned = -2.51214e-05 Jy
! Component: 150  -  total flux cleaned = -3.68381e-05 Jy
! Component: 200  -  total flux cleaned = -4.80716e-05 Jy
! Total flux subtracted in 200 components = -4.80716e-05 Jy
! Clean residual min=-0.001755 max=0.001709 Jy/beam
! Clean residual mean=-0.000002 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.428551 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 155 components and 0.428551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059792Jy  sigma=1.295454
! Fit after  self-cal, rms=0.059792Jy  sigma=1.295451
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8415 mas, bmaj=2 mas, bpa=-2.521 degrees
! Estimated noise=0.295566 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8415 x 2 at -2.521 degrees (North through East)
! Clean map  min=-0.0013003  max=0.35714 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6866 mas, bmaj=1.726 mas, bpa=-1.679 degrees
! Estimated noise=0.457593 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.275075 Jy
! Component: 100  -  total flux cleaned = 0.335936 Jy
! Component: 150  -  total flux cleaned = 0.359594 Jy
! Component: 200  -  total flux cleaned = 0.375042 Jy
! Total flux subtracted in 200 components = 0.375042 Jy
! Clean residual min=-0.005654 max=0.008428 Jy/beam
! Clean residual mean=-0.000005 rms=0.001127 Jy/beam
! Combined flux in latest and established models = 0.375042 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.375042 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8415 mas, bmaj=2 mas, bpa=-2.521 degrees
! Estimated noise=0.295566 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0154309 Jy
! Component: 100  -  total flux cleaned = 0.0249293 Jy
! Component: 150  -  total flux cleaned = 0.0314226 Jy
! Component: 200  -  total flux cleaned = 0.0361248 Jy
! Total flux subtracted in 200 components = 0.0361248 Jy
! Clean residual min=-0.002383 max=0.002697 Jy/beam
! Clean residual mean=-0.000004 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.411167 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 48 components and 0.411167 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00356643 Jy
! Component: 100  -  total flux cleaned = 0.00632441 Jy
! Component: 150  -  total flux cleaned = 0.00854093 Jy
! Component: 200  -  total flux cleaned = 0.0103446 Jy
! Total flux subtracted in 200 components = 0.0103446 Jy
! Clean residual min=-0.001658 max=0.001596 Jy/beam
! Clean residual mean=-0.000002 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.421511 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 60 components and 0.421511 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.065 mas, bmaj=3.038 mas, bpa=-2.063 degrees
! Estimated noise=0.383602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00217558 Jy
! Component: 100  -  total flux cleaned = 0.00346769 Jy
! Component: 150  -  total flux cleaned = 0.00441777 Jy
! Component: 200  -  total flux cleaned = 0.00515762 Jy
! Total flux subtracted in 200 components = 0.00515762 Jy
! Clean residual min=-0.001767 max=0.001790 Jy/beam
! Clean residual mean=-0.000003 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.426669 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00059004 Jy
! Component: 100  -  total flux cleaned = 0.000962806 Jy
! Component: 150  -  total flux cleaned = 0.00111709 Jy
! Component: 200  -  total flux cleaned = 0.00119616 Jy
! Total flux subtracted in 200 components = 0.00119616 Jy
! Clean residual min=-0.001758 max=0.001789 Jy/beam
! Clean residual mean=-0.000002 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.427865 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 117 components and 0.427865 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8415 mas, bmaj=2 mas, bpa=-2.521 degrees
! Estimated noise=0.295566 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.86231e-05 Jy
! Component: 100  -  total flux cleaned = -1.54402e-05 Jy
! Component: 150  -  total flux cleaned = -4.22841e-05 Jy
! Component: 200  -  total flux cleaned = -3.99684e-05 Jy
! Total flux subtracted in 200 components = -3.99684e-05 Jy
! Clean residual min=-0.001316 max=0.001402 Jy/beam
! Clean residual mean=-0.000001 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.427825 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 136 components and 0.427825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059837Jy  sigma=1.296406
! Fit after  self-cal, rms=0.059832Jy  sigma=1.296320
wmodel /J1722+1013_X_map.mod
! wmodel: Unable to open new model file: /J1722+1013_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1722+1013_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8415 x 2 at -2.521 degrees (North through East)
! Clean map  min=-0.0012927  max=0.3575 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1722+1013_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.357502 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00033934 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.284759 0.284759 0.569518 1.13904 2.27807 4.55614 9.11228 18.2246 36.4491 72.8983
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.357 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1053.52 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1722+1013_X_dfm.log closed on Thu May 19 20:28:30 2016