! Started logfile: /scr/pima/bg219b_uvs/J1719+1745_X_uvs.log on Thu Apr  7 02:00:03 2016
obs /scr/pima/bg219b_uvs/J1719+1745_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1719+1745_X_uva.fits
! AN table 1: 23 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.703382 visibilities/baseline/integration-bin.
! Found source: J1719+1745
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 8736 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J1719+1745_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.145189Jy  sigma=25.347921
! Fit after  self-cal, rms=0.464335Jy  sigma=10.423238
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6866 mas, bmaj=1.73 mas, bpa=-0.2962 degrees
! Estimated noise=0.667049 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.405446 Jy
! Component: 100  -  total flux cleaned = 0.526165 Jy
! Total flux subtracted in 100 components = 0.526165 Jy
! Clean residual min=-0.016720 max=0.050087 Jy/beam
! Clean residual mean=-0.000018 rms=0.004823 Jy/beam
! Combined flux in latest and established models = 0.526165 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.526165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.108766Jy  sigma=2.361055
! Fit after  self-cal, rms=0.108729Jy  sigma=2.360598
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0534076 Jy
! Component: 100  -  total flux cleaned = 0.0819704 Jy
! Total flux subtracted in 100 components = 0.0819704 Jy
! Clean residual min=-0.011475 max=0.014570 Jy/beam
! Clean residual mean=-0.000007 rms=0.002379 Jy/beam
! Combined flux in latest and established models = 0.608135 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 18 components and 0.608135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.076059Jy  sigma=1.620654
! Fit after  self-cal, rms=0.076037Jy  sigma=1.620339
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0176857 Jy
! Component: 100  -  total flux cleaned = 0.0290158 Jy
! Total flux subtracted in 100 components = 0.0290158 Jy
! Clean residual min=-0.009873 max=0.009051 Jy/beam
! Clean residual mean=-0.000003 rms=0.001875 Jy/beam
! Combined flux in latest and established models = 0.637151 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 24 components and 0.637151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.071395Jy  sigma=1.516489
! Fit after  self-cal, rms=0.071384Jy  sigma=1.516289
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8493 mas, bmaj=2.005 mas, bpa=-1.878 degrees
! Estimated noise=0.493199 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.4, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106038 Jy
! Component: 100  -  total flux cleaned = 0.0179374 Jy
! Component: 150  -  total flux cleaned = 0.0235128 Jy
! Component: 200  -  total flux cleaned = 0.0270725 Jy
! Total flux subtracted in 200 components = 0.0270725 Jy
! Clean residual min=-0.007570 max=0.006809 Jy/beam
! Clean residual mean=-0.000001 rms=0.001498 Jy/beam
! Combined flux in latest and established models = 0.664224 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 49 components and 0.664223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069211Jy  sigma=1.470918
! Fit after  self-cal, rms=0.069131Jy  sigma=1.469034
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8493 x 2.005 at -1.878 degrees (North through East)
! Clean map  min=-0.0064303  max=0.53965 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.02     KP        0.96     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.97     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.03     KP        0.99     
!   LA        1.01     MK        1.02     NL        1.01     OV        1.00     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.05     KP        1.02     
!   LA        1.02     MK        1.02     NL        1.03     OV        1.01     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.01     KP        0.98     
!   LA        0.99     MK        0.99     NL        0.99     OV        0.97     
!   PT        0.96     SC        1.01     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.03     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.02     OV        0.98     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.03     KP        1.01     
!   LA        1.01     MK        1.06     NL        1.02     OV        1.01     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.00     KP        0.99     
!   LA        0.98     MK        1.01     NL        0.99     OV        0.97     
!   PT        0.97     SC        1.00     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069131Jy  sigma=1.469034
! Fit after  self-cal, rms=0.065109Jy  sigma=1.360077
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8532 mas, bmaj=2.013 mas, bpa=-1.851 degrees
! Estimated noise=0.494543 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00360284 Jy
! Component: 100  -  total flux cleaned = -0.00423522 Jy
! Component: 150  -  total flux cleaned = -0.00407103 Jy
! Component: 200  -  total flux cleaned = -0.00379848 Jy
! Total flux subtracted in 200 components = -0.00379848 Jy
! Clean residual min=-0.005198 max=0.004962 Jy/beam
! Clean residual mean=0.000001 rms=0.001113 Jy/beam
! Combined flux in latest and established models = 0.660425 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 59 components and 0.660425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064792Jy  sigma=1.353668
! Fit after  self-cal, rms=0.064791Jy  sigma=1.353492
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064791Jy  sigma=1.353492
! Fit after  self-cal, rms=0.063712Jy  sigma=1.322792
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8554 mas, bmaj=2.015 mas, bpa=-1.861 degrees
! Estimated noise=0.494718 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000905334 Jy
! Component: 100  -  total flux cleaned = -0.0011889 Jy
! Component: 150  -  total flux cleaned = -0.00143267 Jy
! Component: 200  -  total flux cleaned = -0.00148581 Jy
! Total flux subtracted in 200 components = -0.00148581 Jy
! Clean residual min=-0.003865 max=0.002762 Jy/beam
! Clean residual mean=-0.000000 rms=0.000709 Jy/beam
! Combined flux in latest and established models = 0.658939 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 71 components and 0.658939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063559Jy  sigma=1.319395
! Fit after  self-cal, rms=0.063558Jy  sigma=1.319308
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.33803e-06 Jy
! Component: 100  -  total flux cleaned = -8.64023e-05 Jy
! Component: 150  -  total flux cleaned = -0.000128723 Jy
! Component: 200  -  total flux cleaned = -0.000129012 Jy
! Total flux subtracted in 200 components = -0.000129012 Jy
! Clean residual min=-0.003848 max=0.002627 Jy/beam
! Clean residual mean=-0.000000 rms=0.000700 Jy/beam
! Combined flux in latest and established models = 0.65881 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 76 components and 0.65881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063508Jy  sigma=1.318132
! Fit after  self-cal, rms=0.063506Jy  sigma=1.318100
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063506Jy  sigma=1.318100
! Fit after  self-cal, rms=0.063578Jy  sigma=1.317128
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8568 mas, bmaj=2.015 mas, bpa=-1.821 degrees
! Estimated noise=0.495154 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00129975 Jy
! Component: 100  -  total flux cleaned = -0.00157275 Jy
! Component: 150  -  total flux cleaned = -0.00157311 Jy
! Component: 200  -  total flux cleaned = -0.00160996 Jy
! Total flux subtracted in 200 components = -0.00160996 Jy
! Clean residual min=-0.003709 max=0.002500 Jy/beam
! Clean residual mean=-0.000000 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.6572 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 81 components and 0.6572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063518Jy  sigma=1.315875
! Fit after  self-cal, rms=0.063518Jy  sigma=1.315848
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000113925 Jy
! Component: 100  -  total flux cleaned = -0.000145363 Jy
! Component: 150  -  total flux cleaned = -0.000202551 Jy
! Component: 200  -  total flux cleaned = -0.000202205 Jy
! Total flux subtracted in 200 components = -0.000202205 Jy
! Clean residual min=-0.003692 max=0.002499 Jy/beam
! Clean residual mean=-0.000000 rms=0.000671 Jy/beam
! Combined flux in latest and established models = 0.656998 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 85 components and 0.656998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063495Jy  sigma=1.315307
! Fit after  self-cal, rms=0.063494Jy  sigma=1.315293
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063494Jy  sigma=1.315293
! Fit after  self-cal, rms=0.063562Jy  sigma=1.314707
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.967 mas, bmaj=2.865 mas, bpa=-5.246 degrees
! Estimated noise=0.652781 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000192431 Jy
! Component: 100  -  total flux cleaned = -0.000276455 Jy
! Component: 150  -  total flux cleaned = -0.000345499 Jy
! Component: 200  -  total flux cleaned = -0.000363382 Jy
! Total flux subtracted in 200 components = -0.000363382 Jy
! Clean residual min=-0.003622 max=0.003384 Jy/beam
! Clean residual mean=0.000000 rms=0.000937 Jy/beam
! Combined flux in latest and established models = 0.656635 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 98 components and 0.656635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063556Jy  sigma=1.314467
! Fit after  self-cal, rms=0.063553Jy  sigma=1.314425
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.59226e-05 Jy
! Component: 100  -  total flux cleaned = -7.42489e-05 Jy
! Component: 150  -  total flux cleaned = -0.000106001 Jy
! Component: 200  -  total flux cleaned = -0.000149133 Jy
! Total flux subtracted in 200 components = -0.000149133 Jy
! Clean residual min=-0.003612 max=0.003406 Jy/beam
! Clean residual mean=0.000000 rms=0.000934 Jy/beam
! Combined flux in latest and established models = 0.656486 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 102 components and 0.656486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063557Jy  sigma=1.314450
! Fit after  self-cal, rms=0.063555Jy  sigma=1.314429
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8578 mas, bmaj=2.016 mas, bpa=-1.791 degrees
! Estimated noise=0.495518 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8578 x 2.016 at -1.791 degrees (North through East)
! Clean map  min=-0.0033799  max=0.54178 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063555Jy  sigma=1.314429
! Fit after  self-cal, rms=0.059749Jy  sigma=1.232126
! Inverting map and beam 
! Estimated beam: bmin=0.8568 mas, bmaj=2.014 mas, bpa=-1.812 degrees
! Estimated noise=0.491052 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00376211 Jy
! Component: 100  -  total flux cleaned = -0.00472099 Jy
! Component: 150  -  total flux cleaned = -0.00532735 Jy
! Component: 200  -  total flux cleaned = -0.00562295 Jy
! Total flux subtracted in 200 components = -0.00562295 Jy
! Clean residual min=-0.003008 max=0.002818 Jy/beam
! Clean residual mean=0.000002 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.650863 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 112 components and 0.650863 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059473Jy  sigma=1.227188
! Fit after  self-cal, rms=0.059472Jy  sigma=1.227137
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000302004 Jy
! Component: 100  -  total flux cleaned = -0.000406657 Jy
! Component: 150  -  total flux cleaned = -0.000437542 Jy
! Component: 200  -  total flux cleaned = -0.000496315 Jy
! Total flux subtracted in 200 components = -0.000496315 Jy
! Clean residual min=-0.003067 max=0.002764 Jy/beam
! Clean residual mean=0.000002 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.650366 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 118 components and 0.650366 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059433Jy  sigma=1.226506
! Fit after  self-cal, rms=0.059432Jy  sigma=1.226482
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059432Jy  sigma=1.226482
! Fit after  self-cal, rms=0.058952Jy  sigma=1.222706
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6929 mas, bmaj=1.738 mas, bpa=-0.1521 degrees
! Estimated noise=0.662129 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.400758 Jy
! Component: 100  -  total flux cleaned = 0.517422 Jy
! Component: 150  -  total flux cleaned = 0.568001 Jy
! Component: 200  -  total flux cleaned = 0.594592 Jy
! Total flux subtracted in 200 components = 0.594592 Jy
! Clean residual min=-0.008389 max=0.013521 Jy/beam
! Clean residual mean=-0.000006 rms=0.001916 Jy/beam
! Combined flux in latest and established models = 0.594592 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.594592 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8564 mas, bmaj=2.013 mas, bpa=-1.826 degrees
! Estimated noise=0.487286 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0183908 Jy
! Component: 100  -  total flux cleaned = 0.0295594 Jy
! Component: 150  -  total flux cleaned = 0.0368781 Jy
! Component: 200  -  total flux cleaned = 0.041986 Jy
! Total flux subtracted in 200 components = 0.041986 Jy
! Clean residual min=-0.004012 max=0.003337 Jy/beam
! Clean residual mean=-0.000000 rms=0.000894 Jy/beam
! Combined flux in latest and established models = 0.636578 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 35 components and 0.636578 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.965 mas, bmaj=2.864 mas, bpa=-5.337 degrees
! Estimated noise=0.643204 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00396978 Jy
! Component: 100  -  total flux cleaned = 0.0062405 Jy
! Component: 150  -  total flux cleaned = 0.00756219 Jy
! Component: 200  -  total flux cleaned = 0.00769339 Jy
! Total flux subtracted in 200 components = 0.00769339 Jy
! Clean residual min=-0.003808 max=0.003288 Jy/beam
! Clean residual mean=0.000004 rms=0.000946 Jy/beam
! Combined flux in latest and established models = 0.644272 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000117863 Jy
! Component: 100  -  total flux cleaned = 0.000189876 Jy
! Component: 150  -  total flux cleaned = 0.00028708 Jy
! Component: 200  -  total flux cleaned = 0.000346697 Jy
! Total flux subtracted in 200 components = 0.000346697 Jy
! Clean residual min=-0.003776 max=0.003222 Jy/beam
! Clean residual mean=0.000004 rms=0.000933 Jy/beam
! Combined flux in latest and established models = 0.644618 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 60 components and 0.644618 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8564 mas, bmaj=2.013 mas, bpa=-1.826 degrees
! Estimated noise=0.487286 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000241695 Jy
! Component: 100  -  total flux cleaned = -5.64193e-05 Jy
! Component: 150  -  total flux cleaned = 3.04914e-05 Jy
! Component: 200  -  total flux cleaned = 0.000108893 Jy
! Total flux subtracted in 200 components = 0.000108893 Jy
! Clean residual min=-0.003507 max=0.003075 Jy/beam
! Clean residual mean=0.000002 rms=0.000786 Jy/beam
! Combined flux in latest and established models = 0.644727 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 70 components and 0.644727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059354Jy  sigma=1.233644
! Fit after  self-cal, rms=0.059342Jy  sigma=1.233340
wmodel /scr/pima/bg219b_uvs/J1719+1745_X_map.mod
! Writing 70 model components to file: /scr/pima/bg219b_uvs/J1719+1745_X_map.mod
wobs /scr/pima/bg219b_uvs/J1719+1745_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J1719+1745_X_uvs.fits
wwins /scr/pima/bg219b_uvs/J1719+1745_X_map.win
! wwins: Wrote 2 windows to /scr/pima/bg219b_uvs/J1719+1745_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00140936 Jy
! Component: 100  -  total flux cleaned = -0.00228723 Jy
! Component: 150  -  total flux cleaned = -0.00317537 Jy
! Component: 200  -  total flux cleaned = -0.00381347 Jy
! Component: 250  -  total flux cleaned = -0.00442803 Jy
! Component: 300  -  total flux cleaned = -0.00507329 Jy
! Component: 350  -  total flux cleaned = -0.00569882 Jy
! Component: 400  -  total flux cleaned = -0.00621111 Jy
! Component: 450  -  total flux cleaned = -0.00666379 Jy
! Component: 500  -  total flux cleaned = -0.00697123 Jy
! Component: 550  -  total flux cleaned = -0.00727146 Jy
! Component: 600  -  total flux cleaned = -0.00760592 Jy
! Component: 650  -  total flux cleaned = -0.00776899 Jy
! Component: 700  -  total flux cleaned = -0.00812992 Jy
! Component: 750  -  total flux cleaned = -0.00828631 Jy
! Component: 800  -  total flux cleaned = -0.00851594 Jy
! Component: 850  -  total flux cleaned = -0.00862879 Jy
! Component: 900  -  total flux cleaned = -0.00866618 Jy
! Component: 950  -  total flux cleaned = -0.00877598 Jy
! Component: 1000  -  total flux cleaned = -0.00895499 Jy
! Component: 1050  -  total flux cleaned = -0.0089546 Jy
! Component: 1100  -  total flux cleaned = -0.00902389 Jy
! Component: 1150  -  total flux cleaned = -0.0090914 Jy
! Component: 1200  -  total flux cleaned = -0.00909088 Jy
! Component: 1250  -  total flux cleaned = -0.00912385 Jy
! Component: 1300  -  total flux cleaned = -0.00912401 Jy
! Component: 1350  -  total flux cleaned = -0.00915565 Jy
! Component: 1400  -  total flux cleaned = -0.00918739 Jy
! Component: 1450  -  total flux cleaned = -0.0092497 Jy
! Component: 1500  -  total flux cleaned = -0.00931129 Jy
! Component: 1550  -  total flux cleaned = -0.00946203 Jy
! Component: 1600  -  total flux cleaned = -0.00952162 Jy
! Component: 1650  -  total flux cleaned = -0.00949155 Jy
! Component: 1700  -  total flux cleaned = -0.00960729 Jy
! Component: 1750  -  total flux cleaned = -0.0095501 Jy
! Component: 1800  -  total flux cleaned = -0.00960734 Jy
! Component: 1850  -  total flux cleaned = -0.00966332 Jy
! Component: 1900  -  total flux cleaned = -0.00971819 Jy
! Component: 1950  -  total flux cleaned = -0.00969072 Jy
! Component: 2000  -  total flux cleaned = -0.00977186 Jy
! Component: 2050  -  total flux cleaned = -0.00979891 Jy
! Component: 2100  -  total flux cleaned = -0.00974623 Jy
! Component: 2150  -  total flux cleaned = -0.00979845 Jy
! Component: 2200  -  total flux cleaned = -0.00977251 Jy
! Component: 2250  -  total flux cleaned = -0.00984954 Jy
! Component: 2300  -  total flux cleaned = -0.00982367 Jy
! Component: 2350  -  total flux cleaned = -0.00987387 Jy
! Component: 2400  -  total flux cleaned = -0.00989839 Jy
! Component: 2450  -  total flux cleaned = -0.00999627 Jy
! Component: 2500  -  total flux cleaned = -0.00994754 Jy
! Component: 2550  -  total flux cleaned = -0.00992358 Jy
! Component: 2600  -  total flux cleaned = -0.0100665 Jy
! Component: 2650  -  total flux cleaned = -0.0101136 Jy
! Component: 2700  -  total flux cleaned = -0.0101602 Jy
! Component: 2750  -  total flux cleaned = -0.0102061 Jy
! Component: 2800  -  total flux cleaned = -0.0102291 Jy
! Component: 2850  -  total flux cleaned = -0.0102971 Jy
! Component: 2900  -  total flux cleaned = -0.0103866 Jy
! Component: 2950  -  total flux cleaned = -0.010364 Jy
! Component: 3000  -  total flux cleaned = -0.0104298 Jy
! Component: 3050  -  total flux cleaned = -0.0104951 Jy
! Component: 3100  -  total flux cleaned = -0.0104087 Jy
! Component: 3150  -  total flux cleaned = -0.0105156 Jy
! Component: 3200  -  total flux cleaned = -0.010452 Jy
! Component: 3250  -  total flux cleaned = -0.0104941 Jy
! Component: 3300  -  total flux cleaned = -0.010515 Jy
! Component: 3350  -  total flux cleaned = -0.0105355 Jy
! Component: 3400  -  total flux cleaned = -0.0105353 Jy
! Component: 3450  -  total flux cleaned = -0.0105555 Jy
! Component: 3500  -  total flux cleaned = -0.0105552 Jy
! Component: 3550  -  total flux cleaned = -0.0106352 Jy
! Component: 3600  -  total flux cleaned = -0.0106154 Jy
! Component: 3650  -  total flux cleaned = -0.0106742 Jy
! Component: 3700  -  total flux cleaned = -0.0107129 Jy
! Component: 3750  -  total flux cleaned = -0.010694 Jy
! Component: 3800  -  total flux cleaned = -0.0108089 Jy
! Component: 3850  -  total flux cleaned = -0.010809 Jy
! Component: 3900  -  total flux cleaned = -0.0108093 Jy
! Component: 3950  -  total flux cleaned = -0.0108466 Jy
! Component: 4000  -  total flux cleaned = -0.0108651 Jy
! Component: 4050  -  total flux cleaned = -0.0109386 Jy
! Total flux subtracted in 4096 components = -0.0109385 Jy
! Clean residual min=-0.001004 max=0.000997 Jy/beam
! Clean residual mean=-0.000000 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.633789 Jy
keep
! Adding 286 model components to the UV plane model.
! The established model now contains 356 components and 0.633789 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J1719+1745_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8564 x 2.013 at -1.826 degrees (North through East)
! Clean map  min=-0.0022836  max=0.53353 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1719+1745_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.533526 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000310249 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.174452 0.174452 0.348904 0.697808 1.39562 2.79123 5.58247 11.1649 22.3299 44.6597 89.3195
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.533 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1719.67 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1719+1745_X_uvs.log closed on Thu Apr  7 02:00:07 2016