! Started logfile: /scr/pima/bg219b_uvs/J1707+1846_X_dfm.log on Thu May 19 20:27:53 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1707+1846_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1707+1846_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.904233 visibilities/baseline/integration-bin.
! Found source: J1707+1846
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20508 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1707+1846_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.024129Jy  sigma=25.548676
! Fit after  self-cal, rms=0.822397Jy  sigma=20.504684
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6769 mas, bmaj=1.666 mas, bpa=-2.499 degrees
! Estimated noise=0.367632 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.13487 Jy
! Component: 100  -  total flux cleaned = 0.167765 Jy
! Total flux subtracted in 100 components = 0.167765 Jy
! Clean residual min=-0.005650 max=0.015525 Jy/beam
! Clean residual mean=-0.000014 rms=0.001634 Jy/beam
! Combined flux in latest and established models = 0.167765 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.167765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069007Jy  sigma=1.644424
! Fit after  self-cal, rms=0.068957Jy  sigma=1.643143
! Inverting map 
! Added new window around map position (-2, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0166711 Jy
! Component: 100  -  total flux cleaned = 0.0275114 Jy
! Total flux subtracted in 100 components = 0.0275114 Jy
! Clean residual min=-0.004250 max=0.006426 Jy/beam
! Clean residual mean=-0.000009 rms=0.001080 Jy/beam
! Combined flux in latest and established models = 0.195277 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 18 components and 0.195277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063192Jy  sigma=1.491036
! Fit after  self-cal, rms=0.063031Jy  sigma=1.486198
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00855084 Jy
! Component: 100  -  total flux cleaned = 0.0147918 Jy
! Total flux subtracted in 100 components = 0.0147918 Jy
! Clean residual min=-0.003343 max=0.004617 Jy/beam
! Clean residual mean=-0.000007 rms=0.000830 Jy/beam
! Combined flux in latest and established models = 0.210068 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 29 components and 0.210068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061198Jy  sigma=1.437371
! Fit after  self-cal, rms=0.061150Jy  sigma=1.435999
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8416 mas, bmaj=1.904 mas, bpa=-1.966 degrees
! Estimated noise=0.20677 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.2, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00805517 Jy
! Component: 100  -  total flux cleaned = 0.0131969 Jy
! Component: 150  -  total flux cleaned = 0.0169409 Jy
! Component: 200  -  total flux cleaned = 0.0198137 Jy
! Total flux subtracted in 200 components = 0.0198137 Jy
! Clean residual min=-0.002456 max=0.003218 Jy/beam
! Clean residual mean=-0.000007 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.229882 Jy
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 83 components and 0.229882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059872Jy  sigma=1.403128
! Fit after  self-cal, rms=0.059819Jy  sigma=1.401310
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8416 x 1.904 at -1.966 degrees (North through East)
! Clean map  min=-0.0022896  max=0.17524 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.07     KP        0.96     
!   LA        0.96     MK        0.98     NL        1.02     OV        1.02     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        1.07     KP        1.00     
!   LA        0.99     MK        1.04     NL        1.02     OV        1.06     
!   PT        1.00     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.03     HN        1.06     KP        1.02     
!   LA        0.99     MK        1.04     NL        1.05     OV        1.06     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        0.99     KP        0.99     
!   LA        0.96     MK        1.01     NL        1.02     OV        1.00     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.04     KP        0.96     
!   LA        0.98     MK        1.02     NL        0.99     OV        1.01     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.02     KP        1.01     
!   LA        0.98     MK        1.02     NL        1.03     OV        1.03     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        1.04     KP        1.03     
!   LA        0.98     MK        1.04     NL        1.00     OV        1.03     
!   PT        0.99     SC        1.06     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.01     KP        0.99     
!   LA        0.95     MK        1.05     NL        1.00     OV        1.00     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.99     KP        1.00     
!   LA        0.95     MK        1.02     NL        1.01     OV        1.03     
!   PT        0.95     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.98     KP        0.98     
!   LA        0.92     MK        0.99     NL        0.97     OV        0.99     
!   PT        0.93     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.03     KP        0.94     
!   LA        0.92     MK        1.00     NL        1.00     OV        0.99     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.91     HN        0.98     KP        0.96     
!   LA        0.94     MK        0.97     NL        0.96     OV        0.92     
!   PT        0.90     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.059819Jy  sigma=1.401310
! Fit after  self-cal, rms=0.058278Jy  sigma=1.373836
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8485 mas, bmaj=1.919 mas, bpa=-1.955 degrees
! Estimated noise=0.205813 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00102276 Jy
! Component: 100  -  total flux cleaned = 0.00134886 Jy
! Component: 150  -  total flux cleaned = 0.0014734 Jy
! Component: 200  -  total flux cleaned = 0.00151407 Jy
! Total flux subtracted in 200 components = 0.00151407 Jy
! Clean residual min=-0.001419 max=0.001366 Jy/beam
! Clean residual mean=-0.000001 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.231396 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 95 components and 0.231396 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058246Jy  sigma=1.372963
! Fit after  self-cal, rms=0.058256Jy  sigma=1.372836
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058256Jy  sigma=1.372836
! Fit after  self-cal, rms=0.058163Jy  sigma=1.370003
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8488 mas, bmaj=1.917 mas, bpa=-1.954 degrees
! Estimated noise=0.20572 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00040486 Jy
! Component: 100  -  total flux cleaned = 0.000551367 Jy
! Component: 150  -  total flux cleaned = 0.000553413 Jy
! Component: 200  -  total flux cleaned = 0.000539476 Jy
! Total flux subtracted in 200 components = 0.000539476 Jy
! Clean residual min=-0.001233 max=0.001300 Jy/beam
! Clean residual mean=-0.000001 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.231936 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 103 components and 0.231936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058151Jy  sigma=1.369681
! Fit after  self-cal, rms=0.058152Jy  sigma=1.369635
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-12.8, 16).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109797 Jy
! Component: 100  -  total flux cleaned = 0.0014569 Jy
! Component: 150  -  total flux cleaned = 0.00174235 Jy
! Component: 200  -  total flux cleaned = 0.0018247 Jy
! Total flux subtracted in 200 components = 0.0018247 Jy
! Clean residual min=-0.001256 max=0.001173 Jy/beam
! Clean residual mean=-0.000001 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.23376 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 118 components and 0.23376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058126Jy  sigma=1.368909
! Fit after  self-cal, rms=0.058125Jy  sigma=1.368875
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058125Jy  sigma=1.368875
! Fit after  self-cal, rms=0.058044Jy  sigma=1.368806
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8489 mas, bmaj=1.917 mas, bpa=-1.989 degrees
! Estimated noise=0.205473 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000261205 Jy
! Component: 100  -  total flux cleaned = 0.000358204 Jy
! Component: 150  -  total flux cleaned = 0.000401703 Jy
! Component: 200  -  total flux cleaned = 0.000402402 Jy
! Total flux subtracted in 200 components = 0.000402402 Jy
! Clean residual min=-0.001226 max=0.001136 Jy/beam
! Clean residual mean=-0.000001 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.234163 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 124 components and 0.234163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058037Jy  sigma=1.368621
! Fit after  self-cal, rms=0.058037Jy  sigma=1.368610
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.22874e-05 Jy
! Component: 100  -  total flux cleaned = 3.48529e-05 Jy
! Component: 150  -  total flux cleaned = 5.67563e-05 Jy
! Component: 200  -  total flux cleaned = 6.68305e-05 Jy
! Total flux subtracted in 200 components = 6.68305e-05 Jy
! Clean residual min=-0.001220 max=0.001106 Jy/beam
! Clean residual mean=-0.000001 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.23423 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 133 components and 0.23423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058033Jy  sigma=1.368517
! Fit after  self-cal, rms=0.058032Jy  sigma=1.368511
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058032Jy  sigma=1.368511
! Fit after  self-cal, rms=0.058003Jy  sigma=1.368497
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.046 mas, bmaj=2.816 mas, bpa=-3.059 degrees
! Estimated noise=0.262499 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000623577 Jy
! Component: 100  -  total flux cleaned = 0.000704257 Jy
! Component: 150  -  total flux cleaned = 0.000692454 Jy
! Component: 200  -  total flux cleaned = 0.000672932 Jy
! Total flux subtracted in 200 components = 0.000672932 Jy
! Clean residual min=-0.001523 max=0.001208 Jy/beam
! Clean residual mean=-0.000001 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.234902 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 140 components and 0.234902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058005Jy  sigma=1.368519
! Fit after  self-cal, rms=0.058003Jy  sigma=1.368483
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000145458 Jy
! Component: 100  -  total flux cleaned = 0.000118421 Jy
! Component: 150  -  total flux cleaned = 9.56311e-05 Jy
! Component: 200  -  total flux cleaned = 8.23146e-05 Jy
! Total flux subtracted in 200 components = 8.23146e-05 Jy
! Clean residual min=-0.001525 max=0.001179 Jy/beam
! Clean residual mean=-0.000001 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.234985 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 148 components and 0.234985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058007Jy  sigma=1.368565
! Fit after  self-cal, rms=0.058007Jy  sigma=1.368557
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8491 mas, bmaj=1.917 mas, bpa=-1.99 degrees
! Estimated noise=0.205361 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8491 x 1.917 at -1.99 degrees (North through East)
! Clean map  min=-0.0010854  max=0.17393 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6826 mas, bmaj=1.675 mas, bpa=-2.492 degrees
! Estimated noise=0.366548 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.134281 Jy
! Component: 100  -  total flux cleaned = 0.167533 Jy
! Component: 150  -  total flux cleaned = 0.184358 Jy
! Component: 200  -  total flux cleaned = 0.195279 Jy
! Total flux subtracted in 200 components = 0.195279 Jy
! Clean residual min=-0.002956 max=0.006105 Jy/beam
! Clean residual mean=-0.000007 rms=0.000860 Jy/beam
! Combined flux in latest and established models = 0.195279 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.195279 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8491 mas, bmaj=1.917 mas, bpa=-1.99 degrees
! Estimated noise=0.205361 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117207 Jy
! Component: 100  -  total flux cleaned = 0.0189592 Jy
! Component: 150  -  total flux cleaned = 0.0237095 Jy
! Component: 200  -  total flux cleaned = 0.027011 Jy
! Total flux subtracted in 200 components = 0.027011 Jy
! Clean residual min=-0.001501 max=0.002180 Jy/beam
! Clean residual mean=-0.000004 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.22229 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 55 components and 0.22229 Jy
! Inverting map 
! Added new window around map position (-3, 3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00252868 Jy
! Component: 100  -  total flux cleaned = 0.00444877 Jy
! Component: 150  -  total flux cleaned = 0.00600222 Jy
! Component: 200  -  total flux cleaned = 0.0073148 Jy
! Total flux subtracted in 200 components = 0.0073148 Jy
! Clean residual min=-0.001294 max=0.001239 Jy/beam
! Clean residual mean=-0.000002 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.229605 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 93 components and 0.229605 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.046 mas, bmaj=2.816 mas, bpa=-3.059 degrees
! Estimated noise=0.262499 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187933 Jy
! Component: 100  -  total flux cleaned = 0.0031079 Jy
! Component: 150  -  total flux cleaned = 0.00380596 Jy
! Component: 200  -  total flux cleaned = 0.00424453 Jy
! Total flux subtracted in 200 components = 0.00424453 Jy
! Clean residual min=-0.001649 max=0.001153 Jy/beam
! Clean residual mean=-0.000002 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.233849 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000342466 Jy
! Component: 100  -  total flux cleaned = 0.000652792 Jy
! Component: 150  -  total flux cleaned = 0.000915795 Jy
! Component: 200  -  total flux cleaned = 0.00111148 Jy
! Total flux subtracted in 200 components = 0.00111148 Jy
! Clean residual min=-0.001549 max=0.001114 Jy/beam
! Clean residual mean=-0.000001 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.234961 Jy
! Adding 75 model components to the UV plane model.
! The established model now contains 155 components and 0.234961 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8491 mas, bmaj=1.917 mas, bpa=-1.99 degrees
! Estimated noise=0.205361 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000587794 Jy
! Component: 100  -  total flux cleaned = 0.000740706 Jy
! Component: 150  -  total flux cleaned = 0.000834787 Jy
! Component: 200  -  total flux cleaned = 0.000868669 Jy
! Total flux subtracted in 200 components = 0.000868669 Jy
! Clean residual min=-0.001173 max=0.001121 Jy/beam
! Clean residual mean=-0.000000 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.235829 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 178 components and 0.235829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057991Jy  sigma=1.368195
! Fit after  self-cal, rms=0.057986Jy  sigma=1.368114
wmodel /J1707+1846_X_map.mod
! wmodel: Unable to open new model file: /J1707+1846_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1707+1846_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8491 x 1.917 at -1.99 degrees (North through East)
! Clean map  min=-0.0010803  max=0.17426 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1707+1846_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.174262 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00025815 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.444417 0.444417 0.888834 1.77767 3.55533 7.11067 14.2213 28.4427 56.8854
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.174 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  675.041 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1707+1846_X_dfm.log closed on Thu May 19 20:27:56 2016