! Started logfile: /scr/pima/bg219b_uvs/J1635+6019_X_dfm.log on Thu May 19 20:27:36 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1635+6019_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1635+6019_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.682479 visibilities/baseline/integration-bin.
! Found source: J1635+6019
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19164 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1635+6019_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005535Jy  sigma=25.056253
! Fit after  self-cal, rms=0.922261Jy  sigma=22.975900
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8195 mas, bmaj=1.458 mas, bpa=-80.65 degrees
! Estimated noise=0.478685 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0503828 Jy
! Component: 100  -  total flux cleaned = 0.0714736 Jy
! Total flux subtracted in 100 components = 0.0714736 Jy
! Clean residual min=-0.005671 max=0.013868 Jy/beam
! Clean residual mean=-0.000041 rms=0.001722 Jy/beam
! Combined flux in latest and established models = 0.0714735 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0714735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067238Jy  sigma=1.599747
! Fit after  self-cal, rms=0.066361Jy  sigma=1.583208
! Inverting map 
! Added new window around map position (-0.4, -1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140616 Jy
! Component: 100  -  total flux cleaned = 0.0228978 Jy
! Total flux subtracted in 100 components = 0.0228978 Jy
! Clean residual min=-0.004392 max=0.010353 Jy/beam
! Clean residual mean=-0.000027 rms=0.001247 Jy/beam
! Combined flux in latest and established models = 0.0943713 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 26 components and 0.0943713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060848Jy  sigma=1.438825
! Fit after  self-cal, rms=0.060504Jy  sigma=1.432908
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00799772 Jy
! Component: 100  -  total flux cleaned = 0.0130499 Jy
! Total flux subtracted in 100 components = 0.0130499 Jy
! Clean residual min=-0.003936 max=0.007809 Jy/beam
! Clean residual mean=-0.000019 rms=0.001051 Jy/beam
! Combined flux in latest and established models = 0.107421 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 35 components and 0.107421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058646Jy  sigma=1.384201
! Fit after  self-cal, rms=0.058428Jy  sigma=1.380148
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.1 mas, bmaj=1.887 mas, bpa=-82.03 degrees
! Estimated noise=0.220059 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.4, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00896641 Jy
! Component: 100  -  total flux cleaned = 0.0140753 Jy
! Component: 150  -  total flux cleaned = 0.0173697 Jy
! Component: 200  -  total flux cleaned = 0.0197113 Jy
! Total flux subtracted in 200 components = 0.0197113 Jy
! Clean residual min=-0.002782 max=0.003581 Jy/beam
! Clean residual mean=-0.000028 rms=0.000858 Jy/beam
! Combined flux in latest and established models = 0.127133 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 64 components and 0.127133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056973Jy  sigma=1.342608
! Fit after  self-cal, rms=0.056846Jy  sigma=1.340548
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.1 x 1.887 at -82.03 degrees (North through East)
! Clean map  min=-0.0027514  max=0.067754 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.05     KP        0.96     
!   LA        0.94     MK        1.01     NL        1.08     OV        0.93     
!   PT        1.05     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.05     HN        1.03     KP        1.00     
!   LA        0.93     MK        1.11     NL        1.11     OV        1.01     
!   PT        1.08     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        1.02     KP        0.95     
!   LA        0.97     MK        1.02     NL        1.06     OV        0.96     
!   PT        1.05     SC        1.07     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.05     KP        0.94     
!   LA        0.94     MK        1.17     NL        1.04     OV        0.98     
!   PT        1.05     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.05     KP        0.93     
!   LA        0.95     MK        0.95     NL        1.10     OV        1.00     
!   PT        1.12     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        0.99     KP        1.03     
!   LA        0.96     MK        1.06     NL        1.03     OV        0.94     
!   PT        1.07     SC        1.18     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        0.91     KP        0.96     
!   LA        0.93     MK        0.98     NL        1.07     OV        0.98     
!   PT        1.08     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.98     KP        0.98     
!   LA        0.89     MK        0.88     NL        1.05     OV        0.98     
!   PT        1.10     SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.96     HN        0.90     KP        0.95     
!   LA        0.86     MK        0.94     NL        1.01     OV        0.98     
!   PT        1.04     SC        1.10     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.93     KP        0.93     
!   LA        0.89     MK        1.03     NL        1.09     OV        0.96     
!   PT        1.12     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.94     HN        0.93     KP        0.91     
!   LA        0.94     MK        0.96     NL        0.96     OV        0.91     
!   PT        1.03     SC        0.88     
! 
! 
! Fit before self-cal, rms=0.056846Jy  sigma=1.340548
! Fit after  self-cal, rms=0.055720Jy  sigma=1.327582
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.108 mas, bmaj=1.892 mas, bpa=-82.1 degrees
! Estimated noise=0.217573 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139142 Jy
! Component: 100  -  total flux cleaned = 0.00185275 Jy
! Component: 150  -  total flux cleaned = 0.00218362 Jy
! Component: 200  -  total flux cleaned = 0.00242237 Jy
! Total flux subtracted in 200 components = 0.00242237 Jy
! Clean residual min=-0.002314 max=0.002593 Jy/beam
! Clean residual mean=-0.000018 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.129555 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 79 components and 0.129555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055635Jy  sigma=1.325713
! Fit after  self-cal, rms=0.055655Jy  sigma=1.325127
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055655Jy  sigma=1.325127
! Fit after  self-cal, rms=0.055626Jy  sigma=1.317916
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.111 mas, bmaj=1.901 mas, bpa=-81.54 degrees
! Estimated noise=0.217231 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000335888 Jy
! Component: 100  -  total flux cleaned = 0.000370796 Jy
! Component: 150  -  total flux cleaned = 0.000486283 Jy
! Component: 200  -  total flux cleaned = 0.000585391 Jy
! Total flux subtracted in 200 components = 0.000585391 Jy
! Clean residual min=-0.001904 max=0.001891 Jy/beam
! Clean residual mean=-0.000005 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.13014 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 89 components and 0.13014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055588Jy  sigma=1.316943
! Fit after  self-cal, rms=0.055611Jy  sigma=1.316598
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000150011 Jy
! Component: 100  -  total flux cleaned = 0.000225154 Jy
! Component: 150  -  total flux cleaned = 0.000292657 Jy
! Component: 200  -  total flux cleaned = 0.00037187 Jy
! Total flux subtracted in 200 components = 0.00037187 Jy
! Clean residual min=-0.001923 max=0.001819 Jy/beam
! Clean residual mean=-0.000004 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.130512 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 94 components and 0.130512 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055591Jy  sigma=1.316138
! Fit after  self-cal, rms=0.055580Jy  sigma=1.316029
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055580Jy  sigma=1.316029
! Fit after  self-cal, rms=0.055362Jy  sigma=1.315852
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.112 mas, bmaj=1.903 mas, bpa=-81.42 degrees
! Estimated noise=0.216105 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000165724 Jy
! Component: 100  -  total flux cleaned = -0.000166727 Jy
! Component: 150  -  total flux cleaned = -0.000127371 Jy
! Component: 200  -  total flux cleaned = -7.53437e-05 Jy
! Total flux subtracted in 200 components = -7.53437e-05 Jy
! Clean residual min=-0.001861 max=0.001771 Jy/beam
! Clean residual mean=-0.000004 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.130437 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 97 components and 0.130437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055344Jy  sigma=1.315431
! Fit after  self-cal, rms=0.055330Jy  sigma=1.315220
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000108163 Jy
! Component: 100  -  total flux cleaned = 0.000108847 Jy
! Component: 150  -  total flux cleaned = 0.000125309 Jy
! Component: 200  -  total flux cleaned = 0.000139968 Jy
! Total flux subtracted in 200 components = 0.000139968 Jy
! Clean residual min=-0.001861 max=0.001750 Jy/beam
! Clean residual mean=-0.000004 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.130577 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 99 components and 0.130577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055320Jy  sigma=1.314966
! Fit after  self-cal, rms=0.055315Jy  sigma=1.314919
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055315Jy  sigma=1.314919
! Fit after  self-cal, rms=0.055087Jy  sigma=1.314848
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.446 mas, bmaj=3.233 mas, bpa=-88.84 degrees
! Estimated noise=0.254128 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000236662 Jy
! Component: 100  -  total flux cleaned = -0.000238645 Jy
! Component: 150  -  total flux cleaned = -0.000239122 Jy
! Component: 200  -  total flux cleaned = -0.000239299 Jy
! Total flux subtracted in 200 components = -0.000239299 Jy
! Clean residual min=-0.002489 max=0.002423 Jy/beam
! Clean residual mean=-0.000007 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.130338 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 121 components and 0.130338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055083Jy  sigma=1.314788
! Fit after  self-cal, rms=0.055082Jy  sigma=1.314755
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.41812e-05 Jy
! Component: 100  -  total flux cleaned = 2.35128e-05 Jy
! Component: 150  -  total flux cleaned = 3.1364e-05 Jy
! Component: 200  -  total flux cleaned = 3.83227e-05 Jy
! Total flux subtracted in 200 components = 3.83227e-05 Jy
! Clean residual min=-0.002500 max=0.002419 Jy/beam
! Clean residual mean=-0.000007 rms=0.000593 Jy/beam
! Combined flux in latest and established models = 0.130376 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 125 components and 0.130376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055080Jy  sigma=1.314715
! Fit after  self-cal, rms=0.055078Jy  sigma=1.314692
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.111 mas, bmaj=1.904 mas, bpa=-81.3 degrees
! Estimated noise=0.215106 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.111 x 1.904 at -81.3 degrees (North through East)
! Clean map  min=-0.0017728  max=0.064679 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8274 mas, bmaj=1.47 mas, bpa=-80.15 degrees
! Estimated noise=0.471125 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0496008 Jy
! Component: 100  -  total flux cleaned = 0.073305 Jy
! Component: 150  -  total flux cleaned = 0.0873308 Jy
! Component: 200  -  total flux cleaned = 0.0967214 Jy
! Total flux subtracted in 200 components = 0.0967214 Jy
! Clean residual min=-0.003748 max=0.005451 Jy/beam
! Clean residual mean=-0.000020 rms=0.001032 Jy/beam
! Combined flux in latest and established models = 0.0967214 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.0967214 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.111 mas, bmaj=1.904 mas, bpa=-81.3 degrees
! Estimated noise=0.215106 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116443 Jy
! Component: 100  -  total flux cleaned = 0.0185753 Jy
! Component: 150  -  total flux cleaned = 0.0231142 Jy
! Component: 200  -  total flux cleaned = 0.0262548 Jy
! Total flux subtracted in 200 components = 0.0262548 Jy
! Clean residual min=-0.002081 max=0.001988 Jy/beam
! Clean residual mean=-0.000014 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.122976 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 58 components and 0.122976 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.446 mas, bmaj=3.233 mas, bpa=-88.84 degrees
! Estimated noise=0.254128 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00279267 Jy
! Component: 100  -  total flux cleaned = 0.00437422 Jy
! Component: 150  -  total flux cleaned = 0.00543966 Jy
! Component: 200  -  total flux cleaned = 0.00618527 Jy
! Total flux subtracted in 200 components = 0.00618527 Jy
! Clean residual min=-0.002516 max=0.002379 Jy/beam
! Clean residual mean=-0.000010 rms=0.000605 Jy/beam
! Combined flux in latest and established models = 0.129161 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000394799 Jy
! Component: 100  -  total flux cleaned = 0.000569391 Jy
! Component: 150  -  total flux cleaned = 0.000689812 Jy
! Component: 200  -  total flux cleaned = 0.000770702 Jy
! Total flux subtracted in 200 components = 0.000770702 Jy
! Clean residual min=-0.002503 max=0.002383 Jy/beam
! Clean residual mean=-0.000008 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.129932 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 104 components and 0.129932 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.111 mas, bmaj=1.904 mas, bpa=-81.3 degrees
! Estimated noise=0.215106 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000250011 Jy
! Component: 100  -  total flux cleaned = -0.000160775 Jy
! Component: 150  -  total flux cleaned = -8.05486e-05 Jy
! Component: 200  -  total flux cleaned = 1.41274e-05 Jy
! Total flux subtracted in 200 components = 1.41274e-05 Jy
! Clean residual min=-0.001860 max=0.001797 Jy/beam
! Clean residual mean=-0.000004 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.129946 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 116 components and 0.129946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055088Jy  sigma=1.315047
! Fit after  self-cal, rms=0.055076Jy  sigma=1.314824
wmodel /J1635+6019_X_map.mod
! wmodel: Unable to open new model file: /J1635+6019_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1635+6019_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.111 x 1.904 at -81.3 degrees (North through East)
! Clean map  min=-0.0017507  max=0.063849 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1635+6019_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0638492 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000425336 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.99847 1.99847 3.99695 7.99389 15.9878 31.9756 63.9511
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.063 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  150.114 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1635+6019_X_dfm.log closed on Thu May 19 20:27:39 2016