! Started logfile: /scr/pima/bg219b_uvs/J1632-0033_S_dfm.log on Thu May 19 20:27:05 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219b_uvs/J1632-0033_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219b_uvs/J1632-0033_S_uva.fits ! AN table 1: 50 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.793333 visibilities/baseline/integration-bin. ! Found source: J1632-0033 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 7140 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1632-0033_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.025517Jy sigma=23.035136 ! Fit after self-cal, rms=0.825364Jy sigma=18.477027 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.892 mas, bmaj=7.075 mas, bpa=-0.4444 degrees ! Estimated noise=0.505449 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.133254 Jy ! Component: 100 - total flux cleaned = 0.165282 Jy ! Total flux subtracted in 100 components = 0.165282 Jy ! Clean residual min=-0.005207 max=0.012691 Jy/beam ! Clean residual mean=0.000036 rms=0.001513 Jy/beam ! Combined flux in latest and established models = 0.165282 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.165282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066120Jy sigma=1.431374 ! Fit after self-cal, rms=0.066091Jy sigma=1.430929 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142669 Jy ! Component: 100 - total flux cleaned = 0.0225233 Jy ! Total flux subtracted in 100 components = 0.0225233 Jy ! Clean residual min=-0.003460 max=0.004729 Jy/beam ! Clean residual mean=0.000018 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.187805 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 38 components and 0.187805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062183Jy sigma=1.334887 ! Fit after self-cal, rms=0.062160Jy sigma=1.334211 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.505 mas, bmaj=8.075 mas, bpa=-2.132 degrees ! Estimated noise=0.392231 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00744383 Jy ! Component: 100 - total flux cleaned = 0.0118213 Jy ! Component: 150 - total flux cleaned = 0.0146207 Jy ! Component: 200 - total flux cleaned = 0.0164319 Jy ! Total flux subtracted in 200 components = 0.0164319 Jy ! Clean residual min=-0.003242 max=0.003222 Jy/beam ! Clean residual mean=0.000011 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.204237 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 69 components and 0.204237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061242Jy sigma=1.311638 ! Fit after self-cal, rms=0.061233Jy sigma=1.311125 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.505 x 8.075 at -2.132 degrees (North through East) ! Clean map min=-0.0033273 max=0.17318 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.99 KP 0.98 ! LA 0.96 MK 0.99 NL 1.01 OV 1.01 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 1.03 KP 1.00 ! LA 0.97 MK 1.01 NL 1.02 OV 1.01 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 1.02 KP 1.01 ! LA 0.95 MK 1.00 NL 0.97 OV 1.00 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.02 KP 1.02 ! LA 0.97 MK 1.01 NL 1.02 OV 1.03 ! PT 0.99 SC 1.01 ! ! ! Fit before self-cal, rms=0.061233Jy sigma=1.311125 ! Fit after self-cal, rms=0.061078Jy sigma=1.304009 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.515 mas, bmaj=8.109 mas, bpa=-2.165 degrees ! Estimated noise=0.392312 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000168872 Jy ! Component: 100 - total flux cleaned = 0.000141608 Jy ! Component: 150 - total flux cleaned = 0.000141009 Jy ! Component: 200 - total flux cleaned = 0.000171764 Jy ! Total flux subtracted in 200 components = 0.000171764 Jy ! Clean residual min=-0.002797 max=0.002595 Jy/beam ! Clean residual mean=-0.000004 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.204409 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 80 components and 0.204409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061056Jy sigma=1.303611 ! Fit after self-cal, rms=0.061060Jy sigma=1.303386 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061060Jy sigma=1.303386 ! Fit after self-cal, rms=0.061008Jy sigma=1.300708 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.514 mas, bmaj=8.109 mas, bpa=-2.226 degrees ! Estimated noise=0.392332 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000147181 Jy ! Component: 100 - total flux cleaned = 0.000122427 Jy ! Component: 150 - total flux cleaned = 0.000137593 Jy ! Component: 200 - total flux cleaned = 0.000151581 Jy ! Total flux subtracted in 200 components = 0.000151581 Jy ! Clean residual min=-0.002905 max=0.002402 Jy/beam ! Clean residual mean=-0.000003 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.20456 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 83 components and 0.20456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060991Jy sigma=1.300413 ! Fit after self-cal, rms=0.060988Jy sigma=1.300260 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.20991e-05 Jy ! Component: 100 - total flux cleaned = 6.66891e-06 Jy ! Component: 150 - total flux cleaned = 2.09328e-05 Jy ! Component: 200 - total flux cleaned = 2.05812e-05 Jy ! Total flux subtracted in 200 components = 2.05812e-05 Jy ! Clean residual min=-0.002877 max=0.002333 Jy/beam ! Clean residual mean=-0.000003 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.204581 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 85 components and 0.204581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060975Jy sigma=1.300028 ! Fit after self-cal, rms=0.060971Jy sigma=1.299920 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060971Jy sigma=1.299920 ! Fit after self-cal, rms=0.060991Jy sigma=1.299907 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.51 mas, bmaj=8.108 mas, bpa=-2.275 degrees ! Estimated noise=0.392362 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209706 Jy ! Component: 100 - total flux cleaned = 0.000209605 Jy ! Component: 150 - total flux cleaned = 0.000223827 Jy ! Component: 200 - total flux cleaned = 0.000235651 Jy ! Total flux subtracted in 200 components = 0.000235651 Jy ! Clean residual min=-0.002858 max=0.002300 Jy/beam ! Clean residual mean=-0.000003 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.204817 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 85 components and 0.204817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060979Jy sigma=1.299712 ! Fit after self-cal, rms=0.060977Jy sigma=1.299625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.49098e-06 Jy ! Component: 100 - total flux cleaned = 9.10285e-06 Jy ! Component: 150 - total flux cleaned = 2.09525e-05 Jy ! Component: 200 - total flux cleaned = 2.11336e-05 Jy ! Total flux subtracted in 200 components = 2.11336e-05 Jy ! Clean residual min=-0.002837 max=0.002285 Jy/beam ! Clean residual mean=-0.000003 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.204838 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 87 components and 0.204838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060968Jy sigma=1.299473 ! Fit after self-cal, rms=0.060965Jy sigma=1.299408 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060965Jy sigma=1.299408 ! Fit after self-cal, rms=0.060973Jy sigma=1.299392 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.795 mas, bmaj=12.17 mas, bpa=-0.9161 degrees ! Estimated noise=0.476559 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00082934 Jy ! Component: 100 - total flux cleaned = 0.000903387 Jy ! Component: 150 - total flux cleaned = 0.000922619 Jy ! Component: 200 - total flux cleaned = 0.000935409 Jy ! Total flux subtracted in 200 components = 0.000935409 Jy ! Clean residual min=-0.003385 max=0.002855 Jy/beam ! Clean residual mean=-0.000007 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.205773 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 93 components and 0.205773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060977Jy sigma=1.299509 ! Fit after self-cal, rms=0.060967Jy sigma=1.299241 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.23663e-05 Jy ! Component: 100 - total flux cleaned = 3.21255e-05 Jy ! Component: 150 - total flux cleaned = 3.2329e-05 Jy ! Component: 200 - total flux cleaned = 4.16749e-05 Jy ! Total flux subtracted in 200 components = 4.16749e-05 Jy ! Clean residual min=-0.003342 max=0.002861 Jy/beam ! Clean residual mean=-0.000007 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.205815 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 94 components and 0.205815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060966Jy sigma=1.299325 ! Fit after self-cal, rms=0.060960Jy sigma=1.299148 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.507 mas, bmaj=8.106 mas, bpa=-2.312 degrees ! Estimated noise=0.392374 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.507 x 8.106 at -2.312 degrees (North through East) ! Clean map min=-0.0028617 max=0.17242 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.892 mas, bmaj=7.092 mas, bpa=-0.6912 degrees ! Estimated noise=0.50777 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13363 Jy ! Component: 100 - total flux cleaned = 0.166832 Jy ! Component: 150 - total flux cleaned = 0.181728 Jy ! Component: 200 - total flux cleaned = 0.190426 Jy ! Total flux subtracted in 200 components = 0.190426 Jy ! Clean residual min=-0.003264 max=0.004551 Jy/beam ! Clean residual mean=0.000008 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.190426 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.190426 Jy ! Inverting map and beam ! Estimated beam: bmin=3.507 mas, bmaj=8.106 mas, bpa=-2.312 degrees ! Estimated noise=0.392374 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00669702 Jy ! Component: 100 - total flux cleaned = 0.0103516 Jy ! Component: 150 - total flux cleaned = 0.0124569 Jy ! Component: 200 - total flux cleaned = 0.0136107 Jy ! Total flux subtracted in 200 components = 0.0136107 Jy ! Clean residual min=-0.003137 max=0.002271 Jy/beam ! Clean residual mean=-0.000002 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.204036 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 62 components and 0.204036 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.795 mas, bmaj=12.17 mas, bpa=-0.9161 degrees ! Estimated noise=0.476559 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013183 Jy ! Component: 100 - total flux cleaned = 0.00154323 Jy ! Component: 150 - total flux cleaned = 0.00161559 Jy ! Component: 200 - total flux cleaned = 0.00167744 Jy ! Total flux subtracted in 200 components = 0.00167744 Jy ! Clean residual min=-0.003374 max=0.002838 Jy/beam ! Clean residual mean=-0.000007 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.205714 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.14402e-05 Jy ! Component: 100 - total flux cleaned = 2.17086e-05 Jy ! Component: 150 - total flux cleaned = 3.12664e-05 Jy ! Component: 200 - total flux cleaned = 4.0191e-05 Jy ! Total flux subtracted in 200 components = 4.0191e-05 Jy ! Clean residual min=-0.003353 max=0.002838 Jy/beam ! Clean residual mean=-0.000007 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.205754 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 68 components and 0.205754 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.507 mas, bmaj=8.106 mas, bpa=-2.312 degrees ! Estimated noise=0.392374 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.31053e-05 Jy ! Component: 100 - total flux cleaned = -0.000234759 Jy ! Component: 150 - total flux cleaned = -0.000339012 Jy ! Component: 200 - total flux cleaned = -0.000391999 Jy ! Total flux subtracted in 200 components = -0.000391999 Jy ! Clean residual min=-0.002917 max=0.002238 Jy/beam ! Clean residual mean=-0.000004 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.205362 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 77 components and 0.205362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060961Jy sigma=1.299228 ! Fit after self-cal, rms=0.060959Jy sigma=1.299124 wmodel /J1632-0033_S_map.mod ! wmodel: Unable to open new model file: /J1632-0033_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219b_uvs/J1632-0033_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.507 x 8.106 at -2.312 degrees (North through East) ! Clean map min=-0.0028391 max=0.17237 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1632-0033_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.172372 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00061118 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.06371 1.06371 2.12743 4.25485 8.50971 17.0194 34.0388 68.0777 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.172 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 282.03 quit ! Quitting program ! Log file /scr/pima/bg219b_uvs/J1632-0033_S_dfm.log closed on Thu May 19 20:27:07 2016