! Started logfile: /scr/pima/bg219b_uvs/J1623+6624_X_dfm.log on Thu May 19 20:26:18 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1623+6624_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1623+6624_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.901235 visibilities/baseline/integration-bin.
! Found source: J1623+6624
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17520 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1623+6624_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.017081Jy  sigma=23.830617
! Fit after  self-cal, rms=0.825465Jy  sigma=19.268939
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6753 mas, bmaj=1.435 mas, bpa=-87.29 degrees
! Estimated noise=0.508478 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.134844 Jy
! Component: 100  -  total flux cleaned = 0.166177 Jy
! Total flux subtracted in 100 components = 0.166177 Jy
! Clean residual min=-0.005694 max=0.011335 Jy/beam
! Clean residual mean=-0.000007 rms=0.001348 Jy/beam
! Combined flux in latest and established models = 0.166177 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.166177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067201Jy  sigma=1.486979
! Fit after  self-cal, rms=0.067144Jy  sigma=1.485134
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115995 Jy
! Component: 100  -  total flux cleaned = 0.0174952 Jy
! Total flux subtracted in 100 components = 0.0174952 Jy
! Clean residual min=-0.004569 max=0.005118 Jy/beam
! Clean residual mean=-0.000001 rms=0.001080 Jy/beam
! Combined flux in latest and established models = 0.183672 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 7 components and 0.183672 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065107Jy  sigma=1.428411
! Fit after  self-cal, rms=0.065114Jy  sigma=1.428239
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9166 mas, bmaj=1.848 mas, bpa=-88.94 degrees
! Estimated noise=0.250118 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00367933 Jy
! Component: 100  -  total flux cleaned = 0.00579974 Jy
! Component: 150  -  total flux cleaned = 0.00712536 Jy
! Component: 200  -  total flux cleaned = 0.00767173 Jy
! Total flux subtracted in 200 components = 0.00767173 Jy
! Clean residual min=-0.003534 max=0.004169 Jy/beam
! Clean residual mean=-0.000010 rms=0.001049 Jy/beam
! Combined flux in latest and established models = 0.191344 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 20 components and 0.191344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064905Jy  sigma=1.422681
! Fit after  self-cal, rms=0.064905Jy  sigma=1.422590
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9166 x 1.848 at -88.94 degrees (North through East)
! Clean map  min=-0.0033248  max=0.17581 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.00     KP        0.92     
!   LA        0.96     MK        1.00     NL        0.99     OV        0.94     
!   PT        1.08     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        1.05     KP        0.99     
!   LA        0.99     MK        1.03     NL        1.01     OV        1.02     
!   PT        1.09     SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        1.01     KP        1.00     
!   LA        0.99     MK        1.01     NL        1.04     OV        1.01     
!   PT        1.15     SC        1.10     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.00     KP        0.96     
!   LA        0.98     MK        0.99     NL        0.99     OV        0.97     
!   PT        1.08     SC        1.07     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.00     KP        0.98     
!   LA        0.93     MK        0.99     NL        0.99     OV        0.96     
!   PT        1.10     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.03     KP        0.99     
!   LA        0.98     MK        1.04     NL        0.98     OV        0.98     
!   PT        1.14     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.03     KP        1.01     
!   LA        0.96     MK        1.03     NL        1.01     OV        1.01     
!   PT        1.14     SC        1.10     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.97     
!   LA        0.93     MK        1.02     NL        1.00     OV        0.97     
!   PT        1.09     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.99     KP        0.96     
!   LA        0.97     MK        1.01     NL        1.02     OV        0.99     
!   PT        1.09     SC        1.10     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        0.98     KP        0.96     
!   LA        0.92     MK        0.97     NL        0.96     OV        0.97     
!   PT        1.09     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.94     HN        0.97     KP        0.94     
!   LA        0.90     MK        0.97     NL        0.99     OV        0.96     
!   PT        1.10     SC        1.07     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.96     HN        0.91     KP        0.94     
!   LA        0.94     MK        0.97     NL        0.95     OV        0.90     
!   PT        1.05     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.064905Jy  sigma=1.422590
! Fit after  self-cal, rms=0.064090Jy  sigma=1.389716
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9226 mas, bmaj=1.856 mas, bpa=-88.78 degrees
! Estimated noise=0.250744 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000288802 Jy
! Component: 100  -  total flux cleaned = -0.000370596 Jy
! Component: 150  -  total flux cleaned = -0.000436455 Jy
! Component: 200  -  total flux cleaned = -0.000418553 Jy
! Total flux subtracted in 200 components = -0.000418553 Jy
! Clean residual min=-0.003908 max=0.003575 Jy/beam
! Clean residual mean=-0.000024 rms=0.000856 Jy/beam
! Combined flux in latest and established models = 0.190925 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 26 components and 0.190925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064071Jy  sigma=1.389280
! Fit after  self-cal, rms=0.064103Jy  sigma=1.389115
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064103Jy  sigma=1.389115
! Fit after  self-cal, rms=0.063199Jy  sigma=1.363220
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9233 mas, bmaj=1.861 mas, bpa=-88.57 degrees
! Estimated noise=0.250074 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00103376 Jy
! Component: 100  -  total flux cleaned = -0.00140295 Jy
! Component: 150  -  total flux cleaned = -0.00150812 Jy
! Component: 200  -  total flux cleaned = -0.00155929 Jy
! Total flux subtracted in 200 components = -0.00155929 Jy
! Clean residual min=-0.001531 max=0.001514 Jy/beam
! Clean residual mean=-0.000001 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.189366 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 31 components and 0.189366 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063178Jy  sigma=1.362914
! Fit after  self-cal, rms=0.063192Jy  sigma=1.362786
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.57563e-05 Jy
! Component: 100  -  total flux cleaned = -6.33453e-05 Jy
! Component: 150  -  total flux cleaned = -7.1876e-05 Jy
! Component: 200  -  total flux cleaned = -7.9911e-05 Jy
! Total flux subtracted in 200 components = -7.9911e-05 Jy
! Clean residual min=-0.001532 max=0.001512 Jy/beam
! Clean residual mean=-0.000002 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.189286 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 32 components and 0.189286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063190Jy  sigma=1.362727
! Fit after  self-cal, rms=0.063189Jy  sigma=1.362719
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063189Jy  sigma=1.362719
! Fit after  self-cal, rms=0.063202Jy  sigma=1.361385
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9241 mas, bmaj=1.863 mas, bpa=-88.41 degrees
! Estimated noise=0.249717 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000588615 Jy
! Component: 100  -  total flux cleaned = -0.000669383 Jy
! Component: 150  -  total flux cleaned = -0.000752396 Jy
! Component: 200  -  total flux cleaned = -0.000787734 Jy
! Total flux subtracted in 200 components = -0.000787734 Jy
! Clean residual min=-0.001458 max=0.001523 Jy/beam
! Clean residual mean=-0.000001 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.188498 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 32 components and 0.188498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063193Jy  sigma=1.361277
! Fit after  self-cal, rms=0.063196Jy  sigma=1.361261
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.91958e-06 Jy
! Component: 100  -  total flux cleaned = -3.36407e-05 Jy
! Component: 150  -  total flux cleaned = -4.52086e-05 Jy
! Component: 200  -  total flux cleaned = -5.07252e-05 Jy
! Total flux subtracted in 200 components = -5.07252e-05 Jy
! Clean residual min=-0.001459 max=0.001531 Jy/beam
! Clean residual mean=-0.000001 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.188448 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 33 components and 0.188448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063194Jy  sigma=1.361229
! Fit after  self-cal, rms=0.063194Jy  sigma=1.361223
! Inverting map 
! Added new window around map position (16, 30.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115833 Jy
! Component: 100  -  total flux cleaned = 0.00139391 Jy
! Component: 150  -  total flux cleaned = 0.0014191 Jy
! Component: 200  -  total flux cleaned = 0.00145916 Jy
! Total flux subtracted in 200 components = 0.00145916 Jy
! Clean residual min=-0.001404 max=0.001437 Jy/beam
! Clean residual mean=0.000000 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.189907 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 47 components and 0.189907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063159Jy  sigma=1.360546
! Fit after  self-cal, rms=0.063157Jy  sigma=1.360508
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063157Jy  sigma=1.360508
! Fit after  self-cal, rms=0.063092Jy  sigma=1.360392
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.064 mas, bmaj=3.163 mas, bpa=87.3 degrees
! Estimated noise=0.308681 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000109504 Jy
! Component: 100  -  total flux cleaned = 0.000124976 Jy
! Component: 150  -  total flux cleaned = 0.000207897 Jy
! Component: 200  -  total flux cleaned = 0.000274979 Jy
! Total flux subtracted in 200 components = 0.000274979 Jy
! Clean residual min=-0.001654 max=0.001666 Jy/beam
! Clean residual mean=0.000003 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.190182 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 56 components and 0.190182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063093Jy  sigma=1.360412
! Fit after  self-cal, rms=0.063091Jy  sigma=1.360373
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.57456e-05 Jy
! Component: 100  -  total flux cleaned = 8.17224e-05 Jy
! Component: 150  -  total flux cleaned = 0.000120029 Jy
! Component: 200  -  total flux cleaned = 0.000156007 Jy
! Total flux subtracted in 200 components = 0.000156007 Jy
! Clean residual min=-0.001619 max=0.001627 Jy/beam
! Clean residual mean=0.000003 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.190338 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 61 components and 0.190338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063092Jy  sigma=1.360398
! Fit after  self-cal, rms=0.063090Jy  sigma=1.360376
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9246 mas, bmaj=1.864 mas, bpa=-88.3 degrees
! Estimated noise=0.249251 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9246 x 1.864 at -88.3 degrees (North through East)
! Clean map  min=-0.0012872  max=0.17549 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6808 mas, bmaj=1.445 mas, bpa=-86.73 degrees
! Estimated noise=0.507723 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.13455 Jy
! Component: 100  -  total flux cleaned = 0.164996 Jy
! Component: 150  -  total flux cleaned = 0.175408 Jy
! Component: 200  -  total flux cleaned = 0.180831 Jy
! Total flux subtracted in 200 components = 0.180831 Jy
! Clean residual min=-0.003363 max=0.003397 Jy/beam
! Clean residual mean=-0.000003 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.180831 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.180831 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9246 mas, bmaj=1.864 mas, bpa=-88.3 degrees
! Estimated noise=0.249251 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.6, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00377208 Jy
! Component: 100  -  total flux cleaned = 0.00585897 Jy
! Component: 150  -  total flux cleaned = 0.00732918 Jy
! Component: 200  -  total flux cleaned = 0.00844155 Jy
! Total flux subtracted in 200 components = 0.00844155 Jy
! Clean residual min=-0.001448 max=0.001342 Jy/beam
! Clean residual mean=0.000001 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.189272 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 34 components and 0.189272 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.064 mas, bmaj=3.163 mas, bpa=87.3 degrees
! Estimated noise=0.308681 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00102972 Jy
! Component: 100  -  total flux cleaned = 0.0017122 Jy
! Component: 150  -  total flux cleaned = 0.00197954 Jy
! Component: 200  -  total flux cleaned = 0.00213031 Jy
! Total flux subtracted in 200 components = 0.00213031 Jy
! Clean residual min=-0.001527 max=0.001409 Jy/beam
! Clean residual mean=0.000006 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.191402 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000114575 Jy
! Component: 100  -  total flux cleaned = 0.000215475 Jy
! Component: 150  -  total flux cleaned = 0.000291971 Jy
! Component: 200  -  total flux cleaned = 0.000360557 Jy
! Total flux subtracted in 200 components = 0.000360557 Jy
! Clean residual min=-0.001510 max=0.001348 Jy/beam
! Clean residual mean=0.000007 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.191763 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 66 components and 0.191763 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9246 mas, bmaj=1.864 mas, bpa=-88.3 degrees
! Estimated noise=0.249251 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000289092 Jy
! Component: 100  -  total flux cleaned = -0.000341325 Jy
! Component: 150  -  total flux cleaned = -0.000363881 Jy
! Component: 200  -  total flux cleaned = -0.000318165 Jy
! Total flux subtracted in 200 components = -0.000318165 Jy
! Clean residual min=-0.001337 max=0.001347 Jy/beam
! Clean residual mean=0.000003 rms=0.000330 Jy/beam
! Combined flux in latest and established models = 0.191445 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 83 components and 0.191445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063077Jy  sigma=1.359816
! Fit after  self-cal, rms=0.063070Jy  sigma=1.359727
wmodel /J1623+6624_X_map.mod
! wmodel: Unable to open new model file: /J1623+6624_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1623+6624_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9246 x 1.864 at -88.3 degrees (North through East)
! Clean map  min=-0.0012517  max=0.17577 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1623+6624_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.175773 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000328633 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.560895 0.560895 1.12179 2.24358 4.48716 8.97432 17.9486 35.8973 71.7946
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.175 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  534.859 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1623+6624_X_dfm.log closed on Thu May 19 20:26:20 2016