! Started logfile: /scr/pima/bg219b_uvs/J1623+6624_S_uvs.log on Thu Apr  7 01:27:17 2016
obs /scr/pima/bg219b_uvs/J1623+6624_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1623+6624_S_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.804938 visibilities/baseline/integration-bin.
! Found source: J1623+6624
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 5216 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J1623+6624_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019351Jy  sigma=23.028841
! Fit after  self-cal, rms=0.822397Jy  sigma=18.565668
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.916 mas, bmaj=6.081 mas, bpa=-77.85 degrees
! Estimated noise=0.690453 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.139724 Jy
! Component: 100  -  total flux cleaned = 0.170634 Jy
! Total flux subtracted in 100 components = 0.170634 Jy
! Clean residual min=-0.005344 max=0.009970 Jy/beam
! Clean residual mean=0.000035 rms=0.001498 Jy/beam
! Combined flux in latest and established models = 0.170634 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.170634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065111Jy  sigma=1.382427
! Fit after  self-cal, rms=0.065109Jy  sigma=1.382313
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00955399 Jy
! Component: 100  -  total flux cleaned = 0.0134204 Jy
! Total flux subtracted in 100 components = 0.0134204 Jy
! Clean residual min=-0.004580 max=0.005753 Jy/beam
! Clean residual mean=0.000037 rms=0.001287 Jy/beam
! Combined flux in latest and established models = 0.184054 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 19 components and 0.184054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063999Jy  sigma=1.361390
! Fit after  self-cal, rms=0.063993Jy  sigma=1.361302
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.74 mas, bmaj=7.017 mas, bpa=-80.68 degrees
! Estimated noise=0.47916 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00120651 Jy
! Component: 100  -  total flux cleaned = -0.00135091 Jy
! Component: 150  -  total flux cleaned = -0.00143662 Jy
! Component: 200  -  total flux cleaned = -0.00154985 Jy
! Total flux subtracted in 200 components = -0.00154985 Jy
! Clean residual min=-0.004371 max=0.005387 Jy/beam
! Clean residual mean=0.000092 rms=0.001357 Jy/beam
! Combined flux in latest and established models = 0.182504 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 31 components and 0.182504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063927Jy  sigma=1.359755
! Fit after  self-cal, rms=0.063922Jy  sigma=1.359601
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.74 x 7.017 at -80.68 degrees (North through East)
! Clean map  min=-0.0041836  max=0.1792 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.03     HN        1.00     KP        0.98     
!   LA        0.94     MK        1.04     NL        0.97     OV        1.00     
!   PT        1.13     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        1.03     KP        0.98     
!   LA        0.95     MK        1.04     NL        0.94     OV        0.98     
!   PT        1.14     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.96     KP        0.98     
!   LA        0.95     MK        0.99     NL        0.97     OV        0.96     
!   PT        1.10     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.97     
!   LA        0.94     MK        1.00     NL        0.96     OV        0.97     
!   PT        1.09     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.063922Jy  sigma=1.359601
! Fit after  self-cal, rms=0.062727Jy  sigma=1.333282
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.745 mas, bmaj=7.034 mas, bpa=-80.97 degrees
! Estimated noise=0.478802 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000309029 Jy
! Component: 100  -  total flux cleaned = -0.00030779 Jy
! Component: 150  -  total flux cleaned = -0.000401725 Jy
! Component: 200  -  total flux cleaned = -0.000486638 Jy
! Total flux subtracted in 200 components = -0.000486638 Jy
! Clean residual min=-0.003781 max=0.003988 Jy/beam
! Clean residual mean=0.000076 rms=0.001084 Jy/beam
! Combined flux in latest and established models = 0.182018 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 38 components and 0.182018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062692Jy  sigma=1.332391
! Fit after  self-cal, rms=0.062697Jy  sigma=1.332101
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062697Jy  sigma=1.332101
! Fit after  self-cal, rms=0.061590Jy  sigma=1.303488
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.756 mas, bmaj=7.069 mas, bpa=-80.86 degrees
! Estimated noise=0.477472 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00110724 Jy
! Component: 100  -  total flux cleaned = -0.00132034 Jy
! Component: 150  -  total flux cleaned = -0.00147278 Jy
! Component: 200  -  total flux cleaned = -0.00150282 Jy
! Total flux subtracted in 200 components = -0.00150282 Jy
! Clean residual min=-0.002132 max=0.002736 Jy/beam
! Clean residual mean=0.000017 rms=0.000586 Jy/beam
! Combined flux in latest and established models = 0.180515 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 46 components and 0.180515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061567Jy  sigma=1.302831
! Fit after  self-cal, rms=0.061582Jy  sigma=1.302588
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-106, -67).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00245583 Jy
! Component: 100  -  total flux cleaned = 0.00335296 Jy
! Component: 150  -  total flux cleaned = 0.00332175 Jy
! Component: 200  -  total flux cleaned = 0.00325979 Jy
! Total flux subtracted in 200 components = 0.00325979 Jy
! Clean residual min=-0.002146 max=0.002090 Jy/beam
! Clean residual mean=0.000017 rms=0.000545 Jy/beam
! Combined flux in latest and established models = 0.183775 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 64 components and 0.183775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061462Jy  sigma=1.300484
! Fit after  self-cal, rms=0.061455Jy  sigma=1.300345
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061455Jy  sigma=1.300345
! Fit after  self-cal, rms=0.061272Jy  sigma=1.299921
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.764 mas, bmaj=7.085 mas, bpa=-80.91 degrees
! Estimated noise=0.476058 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000290513 Jy
! Component: 100  -  total flux cleaned = 0.000340668 Jy
! Component: 150  -  total flux cleaned = 0.000200879 Jy
! Component: 200  -  total flux cleaned = 0.00010051 Jy
! Total flux subtracted in 200 components = 0.00010051 Jy
! Clean residual min=-0.002120 max=0.002060 Jy/beam
! Clean residual mean=0.000016 rms=0.000533 Jy/beam
! Combined flux in latest and established models = 0.183875 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 76 components and 0.183875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061237Jy  sigma=1.299260
! Fit after  self-cal, rms=0.061236Jy  sigma=1.299217
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.03934e-05 Jy
! Component: 100  -  total flux cleaned = -4.24214e-05 Jy
! Component: 150  -  total flux cleaned = -6.28273e-05 Jy
! Component: 200  -  total flux cleaned = -8.18395e-05 Jy
! Total flux subtracted in 200 components = -8.18395e-05 Jy
! Clean residual min=-0.002062 max=0.002035 Jy/beam
! Clean residual mean=0.000016 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.183793 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 87 components and 0.183793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061222Jy  sigma=1.298934
! Fit after  self-cal, rms=0.061221Jy  sigma=1.298919
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061221Jy  sigma=1.298919
! Fit after  self-cal, rms=0.061122Jy  sigma=1.298762
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.607 mas, bmaj=11.16 mas, bpa=88.39 degrees
! Estimated noise=0.575444 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000305553 Jy
! Component: 100  -  total flux cleaned = -0.000302264 Jy
! Component: 150  -  total flux cleaned = -0.000339909 Jy
! Component: 200  -  total flux cleaned = -0.000355289 Jy
! Total flux subtracted in 200 components = -0.000355289 Jy
! Clean residual min=-0.002468 max=0.002242 Jy/beam
! Clean residual mean=0.000032 rms=0.000647 Jy/beam
! Combined flux in latest and established models = 0.183438 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 100 components and 0.183438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061113Jy  sigma=1.298745
! Fit after  self-cal, rms=0.061112Jy  sigma=1.298706
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000138108 Jy
! Component: 100  -  total flux cleaned = -0.000138317 Jy
! Component: 150  -  total flux cleaned = -0.000151406 Jy
! Component: 200  -  total flux cleaned = -0.00015155 Jy
! Total flux subtracted in 200 components = -0.00015155 Jy
! Clean residual min=-0.002466 max=0.002210 Jy/beam
! Clean residual mean=0.000032 rms=0.000644 Jy/beam
! Combined flux in latest and established models = 0.183286 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 110 components and 0.183286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061110Jy  sigma=1.298688
! Fit after  self-cal, rms=0.061109Jy  sigma=1.298683
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.77 mas, bmaj=7.093 mas, bpa=-81 degrees
! Estimated noise=0.475174 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.77 x 7.093 at -81 degrees (North through East)
! Clean map  min=-0.0019602  max=0.17832 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.949 mas, bmaj=6.119 mas, bpa=-78.36 degrees
! Estimated noise=0.685331 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.13864 Jy
! Component: 100  -  total flux cleaned = 0.168994 Jy
! Component: 150  -  total flux cleaned = 0.177622 Jy
! Component: 200  -  total flux cleaned = 0.181765 Jy
! Total flux subtracted in 200 components = 0.181765 Jy
! Clean residual min=-0.003507 max=0.003476 Jy/beam
! Clean residual mean=0.000007 rms=0.000893 Jy/beam
! Combined flux in latest and established models = 0.181765 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.181765 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.77 mas, bmaj=7.093 mas, bpa=-81 degrees
! Estimated noise=0.475174 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164086 Jy
! Component: 100  -  total flux cleaned = 0.0025144 Jy
! Component: 150  -  total flux cleaned = 0.00281772 Jy
! Component: 200  -  total flux cleaned = 0.00291964 Jy
! Total flux subtracted in 200 components = 0.00291964 Jy
! Clean residual min=-0.002188 max=0.002191 Jy/beam
! Clean residual mean=0.000016 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.184685 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 32 components and 0.184685 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.607 mas, bmaj=11.16 mas, bpa=88.39 degrees
! Estimated noise=0.575444 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000113756 Jy
! Component: 100  -  total flux cleaned = -0.000182951 Jy
! Component: 150  -  total flux cleaned = -0.000302959 Jy
! Component: 200  -  total flux cleaned = -0.00038199 Jy
! Total flux subtracted in 200 components = -0.00038199 Jy
! Clean residual min=-0.002481 max=0.002337 Jy/beam
! Clean residual mean=0.000034 rms=0.000662 Jy/beam
! Combined flux in latest and established models = 0.184303 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.10519e-05 Jy
! Component: 100  -  total flux cleaned = -0.000114093 Jy
! Component: 150  -  total flux cleaned = -0.000172322 Jy
! Component: 200  -  total flux cleaned = -0.000208669 Jy
! Total flux subtracted in 200 components = -0.000208669 Jy
! Clean residual min=-0.002513 max=0.002283 Jy/beam
! Clean residual mean=0.000033 rms=0.000653 Jy/beam
! Combined flux in latest and established models = 0.184094 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 63 components and 0.184094 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.77 mas, bmaj=7.093 mas, bpa=-81 degrees
! Estimated noise=0.475174 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000107636 Jy
! Component: 100  -  total flux cleaned = -8.52842e-05 Jy
! Component: 150  -  total flux cleaned = -0.0002569 Jy
! Component: 200  -  total flux cleaned = -0.000308697 Jy
! Total flux subtracted in 200 components = -0.000308697 Jy
! Clean residual min=-0.002063 max=0.002119 Jy/beam
! Clean residual mean=0.000017 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.183786 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 77 components and 0.183786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061144Jy  sigma=1.299122
! Fit after  self-cal, rms=0.061140Jy  sigma=1.299056
wmodel /scr/pima/bg219b_uvs/J1623+6624_S_map.mod
! Writing 77 model components to file: /scr/pima/bg219b_uvs/J1623+6624_S_map.mod
wobs /scr/pima/bg219b_uvs/J1623+6624_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J1623+6624_S_uvs.fits
wwins /scr/pima/bg219b_uvs/J1623+6624_S_map.win
! wwins: Wrote 2 windows to /scr/pima/bg219b_uvs/J1623+6624_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000205808 Jy
! Component: 100  -  total flux cleaned = 0.000134618 Jy
! Component: 150  -  total flux cleaned = 6.95309e-05 Jy
! Component: 200  -  total flux cleaned = -5.79844e-05 Jy
! Component: 250  -  total flux cleaned = -8.89369e-05 Jy
! Component: 300  -  total flux cleaned = -5.8738e-05 Jy
! Component: 350  -  total flux cleaned = -0.000147165 Jy
! Component: 400  -  total flux cleaned = -0.000118078 Jy
! Component: 450  -  total flux cleaned = -0.000174323 Jy
! Component: 500  -  total flux cleaned = -0.000228883 Jy
! Component: 550  -  total flux cleaned = -0.000282823 Jy
! Component: 600  -  total flux cleaned = -0.000389054 Jy
! Component: 650  -  total flux cleaned = -0.000519505 Jy
! Component: 700  -  total flux cleaned = -0.000519513 Jy
! Component: 750  -  total flux cleaned = -0.000570634 Jy
! Component: 800  -  total flux cleaned = -0.000696175 Jy
! Component: 850  -  total flux cleaned = -0.000770266 Jy
! Component: 900  -  total flux cleaned = -0.000819229 Jy
! Component: 950  -  total flux cleaned = -0.000962751 Jy
! Component: 1000  -  total flux cleaned = -0.000986404 Jy
! Component: 1050  -  total flux cleaned = -0.00107967 Jy
! Component: 1100  -  total flux cleaned = -0.00112575 Jy
! Component: 1150  -  total flux cleaned = -0.00121608 Jy
! Component: 1200  -  total flux cleaned = -0.0012607 Jy
! Component: 1250  -  total flux cleaned = -0.00128259 Jy
! Component: 1300  -  total flux cleaned = -0.00134818 Jy
! Component: 1350  -  total flux cleaned = -0.00139135 Jy
! Component: 1400  -  total flux cleaned = -0.00139169 Jy
! Component: 1450  -  total flux cleaned = -0.00141291 Jy
! Component: 1500  -  total flux cleaned = -0.00153805 Jy
! Component: 1550  -  total flux cleaned = -0.00151741 Jy
! Component: 1600  -  total flux cleaned = -0.0015378 Jy
! Component: 1650  -  total flux cleaned = -0.00159843 Jy
! Component: 1700  -  total flux cleaned = -0.00167837 Jy
! Component: 1750  -  total flux cleaned = -0.00167807 Jy
! Component: 1800  -  total flux cleaned = -0.00165844 Jy
! Component: 1850  -  total flux cleaned = -0.00163894 Jy
! Component: 1900  -  total flux cleaned = -0.0016773 Jy
! Component: 1950  -  total flux cleaned = -0.00165797 Jy
! Component: 2000  -  total flux cleaned = -0.00167662 Jy
! Component: 2050  -  total flux cleaned = -0.0016578 Jy
! Component: 2100  -  total flux cleaned = -0.00167647 Jy
! Component: 2150  -  total flux cleaned = -0.00174981 Jy
! Component: 2200  -  total flux cleaned = -0.00171331 Jy
! Component: 2250  -  total flux cleaned = -0.0017491 Jy
! Component: 2300  -  total flux cleaned = -0.00180258 Jy
! Component: 2350  -  total flux cleaned = -0.00176757 Jy
! Component: 2400  -  total flux cleaned = -0.00185539 Jy
! Component: 2450  -  total flux cleaned = -0.00185532 Jy
! Component: 2500  -  total flux cleaned = -0.00194146 Jy
! Component: 2550  -  total flux cleaned = -0.0019757 Jy
! Component: 2600  -  total flux cleaned = -0.00200966 Jy
! Component: 2650  -  total flux cleaned = -0.00206008 Jy
! Component: 2700  -  total flux cleaned = -0.00212655 Jy
! Component: 2750  -  total flux cleaned = -0.00214324 Jy
! Component: 2800  -  total flux cleaned = -0.00215972 Jy
! Component: 2850  -  total flux cleaned = -0.00219241 Jy
! Component: 2900  -  total flux cleaned = -0.00227326 Jy
! Component: 2950  -  total flux cleaned = -0.00230547 Jy
! Component: 3000  -  total flux cleaned = -0.00233721 Jy
! Component: 3050  -  total flux cleaned = -0.00236885 Jy
! Component: 3100  -  total flux cleaned = -0.00241603 Jy
! Component: 3150  -  total flux cleaned = -0.0024471 Jy
! Component: 3200  -  total flux cleaned = -0.00244718 Jy
! Component: 3250  -  total flux cleaned = -0.00250853 Jy
! Component: 3300  -  total flux cleaned = -0.00252368 Jy
! Component: 3350  -  total flux cleaned = -0.00252362 Jy
! Component: 3400  -  total flux cleaned = -0.00258366 Jy
! Component: 3450  -  total flux cleaned = -0.00256881 Jy
! Component: 3500  -  total flux cleaned = -0.00262792 Jy
! Component: 3550  -  total flux cleaned = -0.00262785 Jy
! Component: 3600  -  total flux cleaned = -0.00267183 Jy
! Component: 3650  -  total flux cleaned = -0.00272996 Jy
! Component: 3700  -  total flux cleaned = -0.00265804 Jy
! Component: 3750  -  total flux cleaned = -0.00267229 Jy
! Component: 3800  -  total flux cleaned = -0.0027007 Jy
! Component: 3850  -  total flux cleaned = -0.00265826 Jy
! Component: 3900  -  total flux cleaned = -0.0026722 Jy
! Component: 3950  -  total flux cleaned = -0.00268632 Jy
! Component: 4000  -  total flux cleaned = -0.00265858 Jy
! Component: 4050  -  total flux cleaned = -0.00268611 Jy
! Total flux subtracted in 4096 components = -0.00271362 Jy
! Clean residual min=-0.001010 max=0.000777 Jy/beam
! Clean residual mean=0.000001 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.181072 Jy
keep
! Adding 286 model components to the UV plane model.
! The established model now contains 363 components and 0.181072 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J1623+6624_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.77 x 7.093 at -81 degrees (North through East)
! Clean map  min=-0.0015942  max=0.17763 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1623+6624_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.177627 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000252996 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.427294 0.427294 0.854587 1.70917 3.41835 6.8367 13.6734 27.3468 54.6936
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.177 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  702.093 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1623+6624_S_uvs.log closed on Thu Apr  7 01:27:21 2016