! Started logfile: /scr/pima/bg219b_uvs/J1600-0722_X_dfm.log on Thu May 19 20:26:00 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1600-0722_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1600-0722_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.903419 visibilities/baseline/integration-bin.
! Found source: J1600-0722
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25368 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1600-0722_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.046263Jy  sigma=22.880157
! Fit after  self-cal, rms=0.650175Jy  sigma=14.285289
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7026 mas, bmaj=1.693 mas, bpa=-3.915 degrees
! Estimated noise=0.40456 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.269053 Jy
! Component: 100  -  total flux cleaned = 0.328348 Jy
! Total flux subtracted in 100 components = 0.328348 Jy
! Clean residual min=-0.006367 max=0.019338 Jy/beam
! Clean residual mean=0.000003 rms=0.001913 Jy/beam
! Combined flux in latest and established models = 0.328348 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.328348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078477Jy  sigma=1.630871
! Fit after  self-cal, rms=0.078468Jy  sigma=1.630691
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0196749 Jy
! Component: 100  -  total flux cleaned = 0.0301231 Jy
! Total flux subtracted in 100 components = 0.0301231 Jy
! Clean residual min=-0.004841 max=0.011041 Jy/beam
! Clean residual mean=0.000001 rms=0.001333 Jy/beam
! Combined flux in latest and established models = 0.358471 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 23 components and 0.358471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071488Jy  sigma=1.474458
! Fit after  self-cal, rms=0.071495Jy  sigma=1.474390
! Inverting map 
! Added new window around map position (-0.8, -5.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00985783 Jy
! Component: 100  -  total flux cleaned = 0.0161482 Jy
! Total flux subtracted in 100 components = 0.0161482 Jy
! Clean residual min=-0.004466 max=0.006341 Jy/beam
! Clean residual mean=0.000000 rms=0.001123 Jy/beam
! Combined flux in latest and established models = 0.374619 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 33 components and 0.374619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069599Jy  sigma=1.431355
! Fit after  self-cal, rms=0.069527Jy  sigma=1.429629
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9081 mas, bmaj=2.017 mas, bpa=-3.578 degrees
! Estimated noise=0.216007 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10.2, -14.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00786767 Jy
! Component: 100  -  total flux cleaned = 0.01293 Jy
! Component: 150  -  total flux cleaned = 0.0165673 Jy
! Component: 200  -  total flux cleaned = 0.0191289 Jy
! Total flux subtracted in 200 components = 0.0191289 Jy
! Clean residual min=-0.003250 max=0.003857 Jy/beam
! Clean residual mean=0.000005 rms=0.000778 Jy/beam
! Combined flux in latest and established models = 0.393748 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 53 components and 0.393748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068408Jy  sigma=1.406611
! Fit after  self-cal, rms=0.068359Jy  sigma=1.405206
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9081 x 2.017 at -3.578 degrees (North through East)
! Clean map  min=-0.003033  max=0.35103 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.06     KP        0.98     
!   LA        1.01     MK        0.99     NL        1.04     OV        0.99     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.04     HN        1.04     KP        1.00     
!   LA        1.03     MK        1.04     NL        1.05     OV        1.02     
!   PT        1.02     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     HN        1.06     KP        1.04     
!   LA        1.04     MK        1.03     NL        1.07     OV        1.02     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.01     KP        0.99     
!   LA        1.00     MK        1.00     NL        1.02     OV        1.00     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.01     KP        0.98     
!   LA        1.00     MK        0.98     NL        1.02     OV        0.98     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.02     KP        1.00     
!   LA        1.01     MK        1.03     NL        1.04     OV        1.00     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.04     KP        1.03     
!   LA        1.02     MK        1.04     NL        1.02     OV        1.02     
!   PT        1.01     SC        1.07     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.00     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.01     OV        0.98     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.98     KP        0.98     
!   LA        0.97     MK        1.02     NL        1.04     OV        0.99     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.96     HN        0.98     KP        0.97     
!   LA        0.97     MK        1.00     NL        0.97     OV        0.96     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.95     HN        0.99     KP        0.95     
!   LA        0.95     MK        0.99     NL        1.00     OV        0.96     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.92     HN        0.93     KP        0.95     
!   LA        0.95     MK        0.94     NL        0.96     OV        0.92     
!   PT        0.92     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.068359Jy  sigma=1.405206
! Fit after  self-cal, rms=0.064268Jy  sigma=1.329860
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9125 mas, bmaj=2.025 mas, bpa=-3.603 degrees
! Estimated noise=0.21568 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000872122 Jy
! Component: 100  -  total flux cleaned = 0.000825496 Jy
! Component: 150  -  total flux cleaned = 0.000719592 Jy
! Component: 200  -  total flux cleaned = 0.000554304 Jy
! Total flux subtracted in 200 components = 0.000554304 Jy
! Clean residual min=-0.001720 max=0.001655 Jy/beam
! Clean residual mean=0.000002 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.394302 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 71 components and 0.394302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064201Jy  sigma=1.328368
! Fit after  self-cal, rms=0.064197Jy  sigma=1.328116
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064197Jy  sigma=1.328116
! Fit after  self-cal, rms=0.064154Jy  sigma=1.324607
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9122 mas, bmaj=2.028 mas, bpa=-3.557 degrees
! Estimated noise=0.215694 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00023999 Jy
! Component: 100  -  total flux cleaned = 0.000155019 Jy
! Component: 150  -  total flux cleaned = 0.000109711 Jy
! Component: 200  -  total flux cleaned = 0.000107903 Jy
! Total flux subtracted in 200 components = 0.000107903 Jy
! Clean residual min=-0.001463 max=0.001340 Jy/beam
! Clean residual mean=0.000002 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.39441 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 86 components and 0.39441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064128Jy  sigma=1.324002
! Fit after  self-cal, rms=0.064126Jy  sigma=1.323929
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000115387 Jy
! Component: 100  -  total flux cleaned = 0.000169312 Jy
! Component: 150  -  total flux cleaned = 0.000217416 Jy
! Component: 200  -  total flux cleaned = 0.0002469 Jy
! Total flux subtracted in 200 components = 0.0002469 Jy
! Clean residual min=-0.001421 max=0.001291 Jy/beam
! Clean residual mean=0.000002 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.394657 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 94 components and 0.394657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064117Jy  sigma=1.323731
! Fit after  self-cal, rms=0.064115Jy  sigma=1.323719
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064115Jy  sigma=1.323719
! Fit after  self-cal, rms=0.064128Jy  sigma=1.323706
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9126 mas, bmaj=2.029 mas, bpa=-3.535 degrees
! Estimated noise=0.21567 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00032058 Jy
! Component: 100  -  total flux cleaned = -0.000425813 Jy
! Component: 150  -  total flux cleaned = -0.000441171 Jy
! Component: 200  -  total flux cleaned = -0.000455397 Jy
! Total flux subtracted in 200 components = -0.000455397 Jy
! Clean residual min=-0.001369 max=0.001257 Jy/beam
! Clean residual mean=0.000002 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.394202 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 98 components and 0.394202 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064119Jy  sigma=1.323515
! Fit after  self-cal, rms=0.064119Jy  sigma=1.323509
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.85699e-05 Jy
! Component: 100  -  total flux cleaned = -1.84237e-05 Jy
! Component: 150  -  total flux cleaned = -6.3735e-06 Jy
! Component: 200  -  total flux cleaned = -6.82242e-06 Jy
! Total flux subtracted in 200 components = -6.82242e-06 Jy
! Clean residual min=-0.001355 max=0.001264 Jy/beam
! Clean residual mean=0.000002 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.394195 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 104 components and 0.394195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064114Jy  sigma=1.323415
! Fit after  self-cal, rms=0.064113Jy  sigma=1.323412
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064113Jy  sigma=1.323412
! Fit after  self-cal, rms=0.064119Jy  sigma=1.323377
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.165 mas, bmaj=3.499 mas, bpa=-0.1012 degrees
! Estimated noise=0.269785 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.35447e-05 Jy
! Component: 100  -  total flux cleaned = -0.000148945 Jy
! Component: 150  -  total flux cleaned = -0.000231011 Jy
! Component: 200  -  total flux cleaned = -0.000213079 Jy
! Total flux subtracted in 200 components = -0.000213079 Jy
! Clean residual min=-0.001759 max=0.002260 Jy/beam
! Clean residual mean=0.000003 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.393982 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 116 components and 0.393982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064121Jy  sigma=1.323406
! Fit after  self-cal, rms=0.064121Jy  sigma=1.323388
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5, -13.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00195208 Jy
! Component: 100  -  total flux cleaned = 0.00282065 Jy
! Component: 150  -  total flux cleaned = 0.00316041 Jy
! Component: 200  -  total flux cleaned = 0.00349248 Jy
! Total flux subtracted in 200 components = 0.00349248 Jy
! Clean residual min=-0.001440 max=0.001242 Jy/beam
! Clean residual mean=0.000002 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.397474 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 171 components and 0.397474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064082Jy  sigma=1.322516
! Fit after  self-cal, rms=0.064081Jy  sigma=1.322487
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9129 mas, bmaj=2.03 mas, bpa=-3.523 degrees
! Estimated noise=0.21565 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9129 x 2.03 at -3.523 degrees (North through East)
! Clean map  min=-0.0012167  max=0.35038 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7041 mas, bmaj=1.7 mas, bpa=-3.832 degrees
! Estimated noise=0.404304 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.268856 Jy
! Component: 100  -  total flux cleaned = 0.327821 Jy
! Component: 150  -  total flux cleaned = 0.346724 Jy
! Component: 200  -  total flux cleaned = 0.357911 Jy
! Total flux subtracted in 200 components = 0.357911 Jy
! Clean residual min=-0.003737 max=0.006205 Jy/beam
! Clean residual mean=0.000001 rms=0.000927 Jy/beam
! Combined flux in latest and established models = 0.357911 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.357911 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9129 mas, bmaj=2.03 mas, bpa=-3.523 degrees
! Estimated noise=0.21565 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118477 Jy
! Component: 100  -  total flux cleaned = 0.0192755 Jy
! Component: 150  -  total flux cleaned = 0.0243948 Jy
! Component: 200  -  total flux cleaned = 0.0280154 Jy
! Total flux subtracted in 200 components = 0.0280154 Jy
! Clean residual min=-0.001746 max=0.002220 Jy/beam
! Clean residual mean=0.000002 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.385926 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 48 components and 0.385926 Jy
! Inverting map 
! Added new window around map position (-2, -6.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00264803 Jy
! Component: 100  -  total flux cleaned = 0.00456617 Jy
! Component: 150  -  total flux cleaned = 0.00611207 Jy
! Component: 200  -  total flux cleaned = 0.00743863 Jy
! Total flux subtracted in 200 components = 0.00743863 Jy
! Clean residual min=-0.001430 max=0.001323 Jy/beam
! Clean residual mean=0.000001 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.393365 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 76 components and 0.393365 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.165 mas, bmaj=3.499 mas, bpa=-0.1012 degrees
! Estimated noise=0.269785 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164027 Jy
! Component: 100  -  total flux cleaned = 0.00281418 Jy
! Component: 150  -  total flux cleaned = 0.00349643 Jy
! Component: 200  -  total flux cleaned = 0.00388409 Jy
! Total flux subtracted in 200 components = 0.00388409 Jy
! Clean residual min=-0.001516 max=0.001251 Jy/beam
! Clean residual mean=0.000002 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.397249 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000337597 Jy
! Component: 100  -  total flux cleaned = 0.000713545 Jy
! Component: 150  -  total flux cleaned = 0.00103253 Jy
! Component: 200  -  total flux cleaned = 0.00132542 Jy
! Total flux subtracted in 200 components = 0.00132542 Jy
! Clean residual min=-0.001355 max=0.001157 Jy/beam
! Clean residual mean=0.000002 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.398575 Jy
! Adding 76 model components to the UV plane model.
! The established model now contains 141 components and 0.398575 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9129 mas, bmaj=2.03 mas, bpa=-3.523 degrees
! Estimated noise=0.21565 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000305959 Jy
! Component: 100  -  total flux cleaned = 0.00083437 Jy
! Component: 150  -  total flux cleaned = 0.000948024 Jy
! Component: 200  -  total flux cleaned = 0.0009738 Jy
! Total flux subtracted in 200 components = 0.0009738 Jy
! Clean residual min=-0.001162 max=0.001206 Jy/beam
! Clean residual mean=0.000001 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.399548 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 169 components and 0.399548 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064089Jy  sigma=1.322533
! Fit after  self-cal, rms=0.064084Jy  sigma=1.322467
wmodel /J1600-0722_X_map.mod
! wmodel: Unable to open new model file: /J1600-0722_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1600-0722_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9129 x 2.03 at -3.523 degrees (North through East)
! Clean map  min=-0.0011693  max=0.35117 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1600-0722_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.351169 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000261732 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.223595 0.223595 0.44719 0.89438 1.78876 3.57752 7.15504 14.3101 28.6202 57.2403
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.351 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1341.71 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1600-0722_X_dfm.log closed on Thu May 19 20:26:03 2016