! Started logfile: /scr/pima/bg219b_uvs/J1600-0722_S_uvs.log on Thu Apr  7 01:27:07 2016
obs /scr/pima/bg219b_uvs/J1600-0722_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1600-0722_S_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.881624 visibilities/baseline/integration-bin.
! Found source: J1600-0722
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 8252 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J1600-0722_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019734Jy  sigma=21.054808
! Fit after  self-cal, rms=0.816062Jy  sigma=16.846427
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.921 mas, bmaj=6.643 mas, bpa=-1.83 degrees
! Estimated noise=0.583449 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.141947 Jy
! Component: 100  -  total flux cleaned = 0.199811 Jy
! Total flux subtracted in 100 components = 0.199811 Jy
! Clean residual min=-0.013942 max=0.028546 Jy/beam
! Clean residual mean=-0.000039 rms=0.003445 Jy/beam
! Combined flux in latest and established models = 0.199811 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.199811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094761Jy  sigma=1.916081
! Fit after  self-cal, rms=0.093366Jy  sigma=1.891417
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0338586 Jy
! Component: 100  -  total flux cleaned = 0.0521624 Jy
! Total flux subtracted in 100 components = 0.0521624 Jy
! Clean residual min=-0.009242 max=0.025986 Jy/beam
! Clean residual mean=-0.000019 rms=0.002216 Jy/beam
! Combined flux in latest and established models = 0.251974 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 22 components and 0.251974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078054Jy  sigma=1.549107
! Fit after  self-cal, rms=0.077846Jy  sigma=1.544664
! Inverting map 
! Added new window around map position (-5.5, -10).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0220315 Jy
! Component: 100  -  total flux cleaned = 0.0336221 Jy
! Total flux subtracted in 100 components = 0.0336221 Jy
! Clean residual min=-0.006013 max=0.008608 Jy/beam
! Clean residual mean=-0.000009 rms=0.001346 Jy/beam
! Combined flux in latest and established models = 0.285596 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 32 components and 0.285596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070702Jy  sigma=1.391902
! Fit after  self-cal, rms=0.069940Jy  sigma=1.377329
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00960093 Jy
! Component: 100  -  total flux cleaned = 0.0156884 Jy
! Total flux subtracted in 100 components = 0.0156884 Jy
! Clean residual min=-0.004465 max=0.004173 Jy/beam
! Clean residual mean=-0.000004 rms=0.001008 Jy/beam
! Combined flux in latest and established models = 0.301284 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 39 components and 0.301284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068447Jy  sigma=1.345973
! Fit after  self-cal, rms=0.068346Jy  sigma=1.344087
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.582 mas, bmaj=7.816 mas, bpa=-2.755 degrees
! Estimated noise=0.402168 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00532097 Jy
! Component: 100  -  total flux cleaned = 0.00767367 Jy
! Component: 150  -  total flux cleaned = 0.00862783 Jy
! Component: 200  -  total flux cleaned = 0.00924405 Jy
! Total flux subtracted in 200 components = 0.00924405 Jy
! Clean residual min=-0.002966 max=0.002844 Jy/beam
! Clean residual mean=0.000002 rms=0.000667 Jy/beam
! Combined flux in latest and established models = 0.310528 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 57 components and 0.310528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067853Jy  sigma=1.334344
! Fit after  self-cal, rms=0.067822Jy  sigma=1.333654
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.582 x 7.816 at -2.755 degrees (North through East)
! Clean map  min=-0.0025129  max=0.18037 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     HN        0.97     KP        1.00     
!   LA        0.99     MK        0.93     NL        1.02     OV        1.00     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.97     KP        1.00     
!   LA        0.99     MK        0.96     NL        1.05     OV        1.03     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        0.97     KP        1.01     
!   LA        1.00     MK        1.00     NL        1.00     OV        0.99     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        0.99     KP        0.99     
!   LA        0.96     MK        0.95     NL        1.04     OV        1.00     
!   PT        0.98     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.067822Jy  sigma=1.333654
! Fit after  self-cal, rms=0.066897Jy  sigma=1.326023
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.557 mas, bmaj=7.807 mas, bpa=-3.212 degrees
! Estimated noise=0.398644 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000771537 Jy
! Component: 100  -  total flux cleaned = 0.00089473 Jy
! Component: 150  -  total flux cleaned = 0.000893778 Jy
! Component: 200  -  total flux cleaned = 0.000861953 Jy
! Total flux subtracted in 200 components = 0.000861953 Jy
! Clean residual min=-0.002223 max=0.002439 Jy/beam
! Clean residual mean=0.000003 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.31139 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 70 components and 0.31139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066843Jy  sigma=1.325092
! Fit after  self-cal, rms=0.066842Jy  sigma=1.324989
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066842Jy  sigma=1.324989
! Fit after  self-cal, rms=0.066391Jy  sigma=1.322365
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.552 mas, bmaj=7.784 mas, bpa=-3.432 degrees
! Estimated noise=0.397134 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000184468 Jy
! Component: 100  -  total flux cleaned = 0.000152046 Jy
! Component: 150  -  total flux cleaned = 0.000204429 Jy
! Component: 200  -  total flux cleaned = 0.000204324 Jy
! Total flux subtracted in 200 components = 0.000204324 Jy
! Clean residual min=-0.002021 max=0.002213 Jy/beam
! Clean residual mean=0.000003 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.311594 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 73 components and 0.311594 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066363Jy  sigma=1.321914
! Fit after  self-cal, rms=0.066363Jy  sigma=1.321866
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.99352e-05 Jy
! Component: 100  -  total flux cleaned = 2.14434e-05 Jy
! Component: 150  -  total flux cleaned = -2.27251e-05 Jy
! Component: 200  -  total flux cleaned = -4.4129e-05 Jy
! Total flux subtracted in 200 components = -4.4129e-05 Jy
! Clean residual min=-0.002009 max=0.002226 Jy/beam
! Clean residual mean=0.000003 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.31155 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 79 components and 0.31155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066346Jy  sigma=1.321606
! Fit after  self-cal, rms=0.066345Jy  sigma=1.321581
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066345Jy  sigma=1.321581
! Fit after  self-cal, rms=0.066253Jy  sigma=1.321567
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.552 mas, bmaj=7.776 mas, bpa=-3.413 degrees
! Estimated noise=0.396785 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.50013e-05 Jy
! Component: 100  -  total flux cleaned = 4.60989e-05 Jy
! Component: 150  -  total flux cleaned = 8.61334e-05 Jy
! Component: 200  -  total flux cleaned = 8.64175e-05 Jy
! Total flux subtracted in 200 components = 8.64175e-05 Jy
! Clean residual min=-0.001998 max=0.002198 Jy/beam
! Clean residual mean=0.000003 rms=0.000546 Jy/beam
! Combined flux in latest and established models = 0.311637 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 87 components and 0.311637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066240Jy  sigma=1.321329
! Fit after  self-cal, rms=0.066239Jy  sigma=1.321310
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.63039e-05 Jy
! Component: 100  -  total flux cleaned = 8.13501e-06 Jy
! Component: 150  -  total flux cleaned = -9.1373e-06 Jy
! Component: 200  -  total flux cleaned = 7.67515e-06 Jy
! Total flux subtracted in 200 components = 7.67515e-06 Jy
! Clean residual min=-0.001983 max=0.002190 Jy/beam
! Clean residual mean=0.000003 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.311644 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 89 components and 0.311645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066229Jy  sigma=1.321150
! Fit after  self-cal, rms=0.066228Jy  sigma=1.321138
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066228Jy  sigma=1.321138
! Fit after  self-cal, rms=0.066181Jy  sigma=1.321124
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.523 mas, bmaj=12.51 mas, bpa=-1.606 degrees
! Estimated noise=0.491737 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.11258e-07 Jy
! Component: 100  -  total flux cleaned = -2.9778e-05 Jy
! Component: 150  -  total flux cleaned = -4.62911e-05 Jy
! Component: 200  -  total flux cleaned = -5.35259e-05 Jy
! Total flux subtracted in 200 components = -5.35259e-05 Jy
! Clean residual min=-0.001898 max=0.002386 Jy/beam
! Clean residual mean=0.000006 rms=0.000639 Jy/beam
! Combined flux in latest and established models = 0.311591 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 95 components and 0.311591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066180Jy  sigma=1.321112
! Fit after  self-cal, rms=0.066178Jy  sigma=1.321100
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.62033e-05 Jy
! Component: 100  -  total flux cleaned = -3.31559e-05 Jy
! Component: 150  -  total flux cleaned = -2.72136e-05 Jy
! Component: 200  -  total flux cleaned = -2.15909e-05 Jy
! Total flux subtracted in 200 components = -2.15909e-05 Jy
! Clean residual min=-0.001898 max=0.002364 Jy/beam
! Clean residual mean=0.000005 rms=0.000640 Jy/beam
! Combined flux in latest and established models = 0.311569 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 99 components and 0.311569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066179Jy  sigma=1.321106
! Fit after  self-cal, rms=0.066178Jy  sigma=1.321104
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.552 mas, bmaj=7.771 mas, bpa=-3.363 degrees
! Estimated noise=0.396672 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.552 x 7.771 at -3.363 degrees (North through East)
! Clean map  min=-0.0019565  max=0.17829 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.898 mas, bmaj=6.617 mas, bpa=-2.435 degrees
! Estimated noise=0.571666 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.141632 Jy
! Component: 100  -  total flux cleaned = 0.202785 Jy
! Component: 150  -  total flux cleaned = 0.237811 Jy
! Component: 200  -  total flux cleaned = 0.260205 Jy
! Total flux subtracted in 200 components = 0.260205 Jy
! Clean residual min=-0.005463 max=0.011894 Jy/beam
! Clean residual mean=-0.000016 rms=0.001616 Jy/beam
! Combined flux in latest and established models = 0.260205 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.260205 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.552 mas, bmaj=7.771 mas, bpa=-3.363 degrees
! Estimated noise=0.396672 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0194229 Jy
! Component: 100  -  total flux cleaned = 0.031199 Jy
! Component: 150  -  total flux cleaned = 0.0385143 Jy
! Component: 200  -  total flux cleaned = 0.0431788 Jy
! Total flux subtracted in 200 components = 0.0431788 Jy
! Clean residual min=-0.002257 max=0.002498 Jy/beam
! Clean residual mean=-0.000001 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.303384 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 51 components and 0.303384 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.523 mas, bmaj=12.51 mas, bpa=-1.606 degrees
! Estimated noise=0.491737 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00406302 Jy
! Component: 100  -  total flux cleaned = 0.00608091 Jy
! Component: 150  -  total flux cleaned = 0.00713881 Jy
! Component: 200  -  total flux cleaned = 0.00770332 Jy
! Total flux subtracted in 200 components = 0.00770332 Jy
! Clean residual min=-0.001976 max=0.002387 Jy/beam
! Clean residual mean=0.000005 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.311087 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000306155 Jy
! Component: 100  -  total flux cleaned = 0.000425656 Jy
! Component: 150  -  total flux cleaned = 0.000448461 Jy
! Component: 200  -  total flux cleaned = 0.000463986 Jy
! Total flux subtracted in 200 components = 0.000463986 Jy
! Clean residual min=-0.001964 max=0.002401 Jy/beam
! Clean residual mean=0.000005 rms=0.000643 Jy/beam
! Combined flux in latest and established models = 0.311551 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 96 components and 0.311551 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.552 mas, bmaj=7.771 mas, bpa=-3.363 degrees
! Estimated noise=0.396672 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000303066 Jy
! Component: 100  -  total flux cleaned = 0.000304224 Jy
! Component: 150  -  total flux cleaned = 0.000275731 Jy
! Component: 200  -  total flux cleaned = 0.000275426 Jy
! Total flux subtracted in 200 components = 0.000275426 Jy
! Clean residual min=-0.001979 max=0.002201 Jy/beam
! Clean residual mean=0.000003 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.311826 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 111 components and 0.311826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066193Jy  sigma=1.321206
! Fit after  self-cal, rms=0.066180Jy  sigma=1.320857
wmodel /scr/pima/bg219b_uvs/J1600-0722_S_map.mod
! Writing 111 model components to file: /scr/pima/bg219b_uvs/J1600-0722_S_map.mod
wobs /scr/pima/bg219b_uvs/J1600-0722_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J1600-0722_S_uvs.fits
wwins /scr/pima/bg219b_uvs/J1600-0722_S_map.win
! wwins: Wrote 2 windows to /scr/pima/bg219b_uvs/J1600-0722_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000710553 Jy
! Component: 100  -  total flux cleaned = 0.000854464 Jy
! Component: 150  -  total flux cleaned = 0.000786518 Jy
! Component: 200  -  total flux cleaned = 0.000754523 Jy
! Component: 250  -  total flux cleaned = 0.000691549 Jy
! Component: 300  -  total flux cleaned = 0.000568975 Jy
! Component: 350  -  total flux cleaned = 0.000508787 Jy
! Component: 400  -  total flux cleaned = 0.000390793 Jy
! Component: 450  -  total flux cleaned = 0.00027684 Jy
! Component: 500  -  total flux cleaned = 0.000276916 Jy
! Component: 550  -  total flux cleaned = 0.000276748 Jy
! Component: 600  -  total flux cleaned = 0.000195777 Jy
! Component: 650  -  total flux cleaned = 0.00014277 Jy
! Component: 700  -  total flux cleaned = 0.000169356 Jy
! Component: 750  -  total flux cleaned = 0.000117863 Jy
! Component: 800  -  total flux cleaned = 0.000117957 Jy
! Component: 850  -  total flux cleaned = 1.80665e-05 Jy
! Component: 900  -  total flux cleaned = 4.32126e-05 Jy
! Component: 950  -  total flux cleaned = 1.9559e-05 Jy
! Component: 1000  -  total flux cleaned = -2.77294e-05 Jy
! Component: 1050  -  total flux cleaned = -3.65864e-06 Jy
! Component: 1100  -  total flux cleaned = -3.19234e-06 Jy
! Component: 1150  -  total flux cleaned = -9.44492e-05 Jy
! Component: 1200  -  total flux cleaned = -4.3046e-06 Jy
! Component: 1250  -  total flux cleaned = -2.67583e-05 Jy
! Component: 1300  -  total flux cleaned = -7.0765e-05 Jy
! Component: 1350  -  total flux cleaned = -0.000114348 Jy
! Component: 1400  -  total flux cleaned = -0.000178393 Jy
! Component: 1450  -  total flux cleaned = -0.000178048 Jy
! Component: 1500  -  total flux cleaned = -0.000136415 Jy
! Component: 1550  -  total flux cleaned = -0.000218814 Jy
! Component: 1600  -  total flux cleaned = -0.000279923 Jy
! Component: 1650  -  total flux cleaned = -0.000260081 Jy
! Component: 1700  -  total flux cleaned = -0.000359356 Jy
! Component: 1750  -  total flux cleaned = -0.00041823 Jy
! Component: 1800  -  total flux cleaned = -0.000476534 Jy
! Component: 1850  -  total flux cleaned = -0.000476196 Jy
! Component: 1900  -  total flux cleaned = -0.000513876 Jy
! Component: 1950  -  total flux cleaned = -0.000532511 Jy
! Component: 2000  -  total flux cleaned = -0.000569493 Jy
! Component: 2050  -  total flux cleaned = -0.000587621 Jy
! Component: 2100  -  total flux cleaned = -0.000624182 Jy
! Component: 2150  -  total flux cleaned = -0.00069659 Jy
! Component: 2200  -  total flux cleaned = -0.000768163 Jy
! Component: 2250  -  total flux cleaned = -0.000768129 Jy
! Component: 2300  -  total flux cleaned = -0.000820853 Jy
! Component: 2350  -  total flux cleaned = -0.000855544 Jy
! Component: 2400  -  total flux cleaned = -0.000924427 Jy
! Component: 2450  -  total flux cleaned = -0.000975456 Jy
! Component: 2500  -  total flux cleaned = -0.00100955 Jy
! Component: 2550  -  total flux cleaned = -0.00111015 Jy
! Component: 2600  -  total flux cleaned = -0.00111009 Jy
! Component: 2650  -  total flux cleaned = -0.00114306 Jy
! Component: 2700  -  total flux cleaned = -0.00119241 Jy
! Component: 2750  -  total flux cleaned = -0.00128997 Jy
! Component: 2800  -  total flux cleaned = -0.00130604 Jy
! Component: 2850  -  total flux cleaned = -0.00135383 Jy
! Component: 2900  -  total flux cleaned = -0.00140146 Jy
! Component: 2950  -  total flux cleaned = -0.0014485 Jy
! Component: 3000  -  total flux cleaned = -0.00149518 Jy
! Component: 3050  -  total flux cleaned = -0.0016342 Jy
! Component: 3100  -  total flux cleaned = -0.00155738 Jy
! Component: 3150  -  total flux cleaned = -0.00157305 Jy
! Component: 3200  -  total flux cleaned = -0.00158827 Jy
! Component: 3250  -  total flux cleaned = -0.00163328 Jy
! Component: 3300  -  total flux cleaned = -0.00164803 Jy
! Component: 3350  -  total flux cleaned = -0.00167752 Jy
! Component: 3400  -  total flux cleaned = -0.00176533 Jy
! Component: 3450  -  total flux cleaned = -0.00176541 Jy
! Component: 3500  -  total flux cleaned = -0.00179427 Jy
! Component: 3550  -  total flux cleaned = -0.00180855 Jy
! Component: 3600  -  total flux cleaned = -0.00183689 Jy
! Component: 3650  -  total flux cleaned = -0.00187932 Jy
! Component: 3700  -  total flux cleaned = -0.00193543 Jy
! Component: 3750  -  total flux cleaned = -0.00200506 Jy
! Component: 3800  -  total flux cleaned = -0.0020329 Jy
! Component: 3850  -  total flux cleaned = -0.00210159 Jy
! Component: 3900  -  total flux cleaned = -0.00211517 Jy
! Component: 3950  -  total flux cleaned = -0.0021287 Jy
! Component: 4000  -  total flux cleaned = -0.00219604 Jy
! Component: 4050  -  total flux cleaned = -0.00218271 Jy
! Total flux subtracted in 4096 components = -0.00224919 Jy
! Clean residual min=-0.000890 max=0.000837 Jy/beam
! Clean residual mean=0.000002 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.309577 Jy
keep
! Adding 300 model components to the UV plane model.
! The established model now contains 411 components and 0.309577 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J1600-0722_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.552 x 7.771 at -3.363 degrees (North through East)
! Clean map  min=-0.0013536  max=0.1774 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1600-0722_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.177401 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000246222 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.416381 0.416381 0.832762 1.66552 3.33105 6.66209 13.3242 26.6484 53.2967
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.177 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  720.494 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1600-0722_S_uvs.log closed on Thu Apr  7 01:27:12 2016