! Started logfile: /scr/pima/bg219b_uvs/J1550-0538_X_dfm.log on Thu May 19 20:25:27 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1550-0538_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1550-0538_X_uva.fits
! AN table 1: 51 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.89281 visibilities/baseline/integration-bin.
! Found source: J1550-0538
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24588 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1550-0538_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015625Jy  sigma=23.728321
! Fit after  self-cal, rms=0.861473Jy  sigma=20.071819
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7152 mas, bmaj=1.702 mas, bpa=-2.663 degrees
! Estimated noise=0.363375 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.100576 Jy
! Component: 100  -  total flux cleaned = 0.132543 Jy
! Total flux subtracted in 100 components = 0.132543 Jy
! Clean residual min=-0.005737 max=0.014660 Jy/beam
! Clean residual mean=0.000016 rms=0.001546 Jy/beam
! Combined flux in latest and established models = 0.132543 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.132543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071767Jy  sigma=1.593333
! Fit after  self-cal, rms=0.071438Jy  sigma=1.586256
! Inverting map 
! Added new window around map position (0.8, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0174073 Jy
! Component: 100  -  total flux cleaned = 0.0277296 Jy
! Total flux subtracted in 100 components = 0.0277296 Jy
! Clean residual min=-0.003659 max=0.006226 Jy/beam
! Clean residual mean=0.000008 rms=0.000903 Jy/beam
! Combined flux in latest and established models = 0.160273 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 17 components and 0.160273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065244Jy  sigma=1.423977
! Fit after  self-cal, rms=0.065113Jy  sigma=1.421005
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00744766 Jy
! Component: 100  -  total flux cleaned = 0.0121584 Jy
! Total flux subtracted in 100 components = 0.0121584 Jy
! Clean residual min=-0.002774 max=0.003402 Jy/beam
! Clean residual mean=0.000005 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.172431 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 31 components and 0.172431 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063874Jy  sigma=1.388679
! Fit after  self-cal, rms=0.063828Jy  sigma=1.387520
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9027 mas, bmaj=2.009 mas, bpa=-1.325 degrees
! Estimated noise=0.205381 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0052306 Jy
! Component: 100  -  total flux cleaned = 0.00823404 Jy
! Component: 150  -  total flux cleaned = 0.0101957 Jy
! Component: 200  -  total flux cleaned = 0.0114906 Jy
! Total flux subtracted in 200 components = 0.0114906 Jy
! Clean residual min=-0.002342 max=0.002751 Jy/beam
! Clean residual mean=0.000004 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.183922 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 44 components and 0.183922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063380Jy  sigma=1.376263
! Fit after  self-cal, rms=0.063358Jy  sigma=1.375622
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9027 x 2.009 at -1.325 degrees (North through East)
! Clean map  min=-0.0020204  max=0.1324 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.04     KP        0.97     
!   LA        1.00     MK        0.96     NL        1.02     OV        0.98     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.05     KP        1.00     
!   LA        1.01     MK        1.01     NL        1.01     OV        1.01     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.05     HN        1.06     KP        1.06     
!   LA        1.02     MK        1.00     NL        1.06     OV        1.01     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.00     KP        1.00     
!   LA        1.00     MK        0.98     NL        1.01     OV        1.01     
!   PT        0.95     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.02     KP        0.98     
!   LA        0.98     MK        0.98     NL        1.01     OV        0.99     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.04     KP        1.01     
!   LA        1.00     MK        1.02     NL        1.04     OV        0.99     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.05     KP        1.05     
!   LA        1.05     MK        1.02     NL        1.08     OV        1.01     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.01     KP        1.03     
!   LA        1.01     MK        1.01     NL        1.03     OV        1.00     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.97     KP        0.99     
!   LA        0.98     MK        1.03     NL        1.03     OV        1.03     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        0.97     KP        1.00     
!   LA        0.97     MK        0.99     NL        1.01     OV        0.97     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        0.97     KP        0.96     
!   LA        0.97     MK        0.99     NL        1.02     OV        1.00     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.95     HN        0.96     KP        0.98     
!   LA        0.94     MK        0.94     NL        0.95     OV        0.94     
!   PT        0.93     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.063358Jy  sigma=1.375622
! Fit after  self-cal, rms=0.062353Jy  sigma=1.363834
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9043 mas, bmaj=2.013 mas, bpa=-1.38 degrees
! Estimated noise=0.204943 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.6, 3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163746 Jy
! Component: 100  -  total flux cleaned = 0.00192488 Jy
! Component: 150  -  total flux cleaned = 0.00212379 Jy
! Component: 200  -  total flux cleaned = 0.00222532 Jy
! Total flux subtracted in 200 components = 0.00222532 Jy
! Clean residual min=-0.001563 max=0.001676 Jy/beam
! Clean residual mean=0.000002 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.186147 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 59 components and 0.186147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062273Jy  sigma=1.361824
! Fit after  self-cal, rms=0.062270Jy  sigma=1.361545
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062270Jy  sigma=1.361545
! Fit after  self-cal, rms=0.062530Jy  sigma=1.359081
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9037 mas, bmaj=2.016 mas, bpa=-1.286 degrees
! Estimated noise=0.205321 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000585864 Jy
! Component: 100  -  total flux cleaned = 0.000970091 Jy
! Component: 150  -  total flux cleaned = 0.00107439 Jy
! Component: 200  -  total flux cleaned = 0.00116535 Jy
! Total flux subtracted in 200 components = 0.00116535 Jy
! Clean residual min=-0.001406 max=0.001239 Jy/beam
! Clean residual mean=0.000001 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.187313 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 77 components and 0.187313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062501Jy  sigma=1.358428
! Fit after  self-cal, rms=0.062504Jy  sigma=1.358315
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000199275 Jy
! Component: 100  -  total flux cleaned = 0.000442215 Jy
! Component: 150  -  total flux cleaned = 0.000460555 Jy
! Component: 200  -  total flux cleaned = 0.000530367 Jy
! Total flux subtracted in 200 components = 0.000530367 Jy
! Clean residual min=-0.001339 max=0.001220 Jy/beam
! Clean residual mean=0.000001 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.187843 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 79 components and 0.187843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062489Jy  sigma=1.357995
! Fit after  self-cal, rms=0.062486Jy  sigma=1.357937
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062486Jy  sigma=1.357937
! Fit after  self-cal, rms=0.062560Jy  sigma=1.357899
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9038 mas, bmaj=2.016 mas, bpa=-1.227 degrees
! Estimated noise=0.205449 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.79108e-05 Jy
! Component: 100  -  total flux cleaned = 0.000293711 Jy
! Component: 150  -  total flux cleaned = 0.00037499 Jy
! Component: 200  -  total flux cleaned = 0.000435118 Jy
! Total flux subtracted in 200 components = 0.000435118 Jy
! Clean residual min=-0.001304 max=0.001194 Jy/beam
! Clean residual mean=0.000001 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.188278 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 84 components and 0.188278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062549Jy  sigma=1.357661
! Fit after  self-cal, rms=0.062548Jy  sigma=1.357617
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.47062e-05 Jy
! Component: 100  -  total flux cleaned = 0.000193634 Jy
! Component: 150  -  total flux cleaned = 0.000207601 Jy
! Component: 200  -  total flux cleaned = 0.000220644 Jy
! Total flux subtracted in 200 components = 0.000220644 Jy
! Clean residual min=-0.001263 max=0.001187 Jy/beam
! Clean residual mean=0.000001 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.188499 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 89 components and 0.188499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062540Jy  sigma=1.357450
! Fit after  self-cal, rms=0.062538Jy  sigma=1.357415
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062538Jy  sigma=1.357415
! Fit after  self-cal, rms=0.062587Jy  sigma=1.357408
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.194 mas, bmaj=3.556 mas, bpa=0.2767 degrees
! Estimated noise=0.258472 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000149822 Jy
! Component: 100  -  total flux cleaned = 0.000339256 Jy
! Component: 150  -  total flux cleaned = 0.00045077 Jy
! Component: 200  -  total flux cleaned = 0.000479013 Jy
! Total flux subtracted in 200 components = 0.000479013 Jy
! Clean residual min=-0.001330 max=0.001089 Jy/beam
! Clean residual mean=0.000002 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.188978 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 97 components and 0.188978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062582Jy  sigma=1.357309
! Fit after  self-cal, rms=0.062580Jy  sigma=1.357279
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.01813e-06 Jy
! Component: 100  -  total flux cleaned = 0.000110976 Jy
! Component: 150  -  total flux cleaned = 0.00015401 Jy
! Component: 200  -  total flux cleaned = 0.000184761 Jy
! Total flux subtracted in 200 components = 0.000184761 Jy
! Clean residual min=-0.001328 max=0.001087 Jy/beam
! Clean residual mean=0.000002 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.189163 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 99 components and 0.189163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062577Jy  sigma=1.357222
! Fit after  self-cal, rms=0.062575Jy  sigma=1.357191
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9042 mas, bmaj=2.016 mas, bpa=-1.179 degrees
! Estimated noise=0.205597 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9042 x 2.016 at -1.179 degrees (North through East)
! Clean map  min=-0.0013324  max=0.13207 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7165 mas, bmaj=1.705 mas, bpa=-2.554 degrees
! Estimated noise=0.360753 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.100022 Jy
! Component: 100  -  total flux cleaned = 0.134265 Jy
! Component: 150  -  total flux cleaned = 0.150587 Jy
! Component: 200  -  total flux cleaned = 0.160403 Jy
! Total flux subtracted in 200 components = 0.160403 Jy
! Clean residual min=-0.002735 max=0.005225 Jy/beam
! Clean residual mean=0.000008 rms=0.000756 Jy/beam
! Combined flux in latest and established models = 0.160403 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.160403 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9042 mas, bmaj=2.016 mas, bpa=-1.179 degrees
! Estimated noise=0.205597 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00996656 Jy
! Component: 100  -  total flux cleaned = 0.0154272 Jy
! Component: 150  -  total flux cleaned = 0.0189857 Jy
! Component: 200  -  total flux cleaned = 0.0214432 Jy
! Total flux subtracted in 200 components = 0.0214432 Jy
! Clean residual min=-0.001634 max=0.001836 Jy/beam
! Clean residual mean=0.000003 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.181846 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 50 components and 0.181846 Jy
! Inverting map 
! Added new window around map position (1.8, 2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00188942 Jy
! Component: 100  -  total flux cleaned = 0.00327253 Jy
! Component: 150  -  total flux cleaned = 0.00435674 Jy
! Component: 200  -  total flux cleaned = 0.00492431 Jy
! Total flux subtracted in 200 components = 0.00492431 Jy
! Clean residual min=-0.001439 max=0.001384 Jy/beam
! Clean residual mean=0.000002 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.18677 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 72 components and 0.18677 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.194 mas, bmaj=3.556 mas, bpa=0.2767 degrees
! Estimated noise=0.258472 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000905064 Jy
! Component: 100  -  total flux cleaned = 0.00142691 Jy
! Component: 150  -  total flux cleaned = 0.00161342 Jy
! Component: 200  -  total flux cleaned = 0.00175775 Jy
! Total flux subtracted in 200 components = 0.00175775 Jy
! Clean residual min=-0.001430 max=0.001023 Jy/beam
! Clean residual mean=0.000002 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.188528 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000126639 Jy
! Component: 100  -  total flux cleaned = 0.000227917 Jy
! Component: 150  -  total flux cleaned = 0.000327861 Jy
! Component: 200  -  total flux cleaned = 0.000373431 Jy
! Total flux subtracted in 200 components = 0.000373431 Jy
! Clean residual min=-0.001391 max=0.001027 Jy/beam
! Clean residual mean=0.000002 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.188901 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 102 components and 0.188901 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9042 mas, bmaj=2.016 mas, bpa=-1.179 degrees
! Estimated noise=0.205597 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0003154 Jy
! Component: 100  -  total flux cleaned = -0.000273878 Jy
! Component: 150  -  total flux cleaned = -0.000255075 Jy
! Component: 200  -  total flux cleaned = -0.000202584 Jy
! Total flux subtracted in 200 components = -0.000202584 Jy
! Clean residual min=-0.001295 max=0.001180 Jy/beam
! Clean residual mean=0.000001 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.188699 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 119 components and 0.188699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062576Jy  sigma=1.357191
! Fit after  self-cal, rms=0.062569Jy  sigma=1.357073
wmodel /J1550-0538_X_map.mod
! wmodel: Unable to open new model file: /J1550-0538_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1550-0538_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9042 x 2.016 at -1.179 degrees (North through East)
! Clean map  min=-0.0012298  max=0.13206 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1550-0538_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.132063 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000282068 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.640759 0.640759 1.28152 2.56304 5.12607 10.2521 20.5043 41.0086 82.0171
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.132 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  468.194 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1550-0538_X_dfm.log closed on Thu May 19 20:25:30 2016