! Started logfile: /scr/pima/bg219b_uvs/J1532+6755_X_dfm.log on Thu May 19 20:24:35 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1532+6755_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1532+6755_X_uva.fits
! AN table 1: 56 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.634127 visibilities/baseline/integration-bin.
! Found source: J1532+6755
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19176 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1532+6755_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002408Jy  sigma=24.813616
! Fit after  self-cal, rms=0.928557Jy  sigma=22.987915
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8006 mas, bmaj=1.666 mas, bpa=67.79 degrees
! Estimated noise=0.508273 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0485888 Jy
! Component: 100  -  total flux cleaned = 0.0679939 Jy
! Total flux subtracted in 100 components = 0.0679939 Jy
! Clean residual min=-0.006287 max=0.012288 Jy/beam
! Clean residual mean=0.000017 rms=0.001614 Jy/beam
! Combined flux in latest and established models = 0.0679939 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0679939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063528Jy  sigma=1.502562
! Fit after  self-cal, rms=0.062429Jy  sigma=1.483136
! Inverting map 
! Added new window around map position (0.8, 1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133044 Jy
! Component: 100  -  total flux cleaned = 0.0216884 Jy
! Total flux subtracted in 100 components = 0.0216884 Jy
! Clean residual min=-0.004308 max=0.008063 Jy/beam
! Clean residual mean=0.000009 rms=0.001100 Jy/beam
! Combined flux in latest and established models = 0.0896824 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 22 components and 0.0896824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058295Jy  sigma=1.373207
! Fit after  self-cal, rms=0.058106Jy  sigma=1.369552
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00705665 Jy
! Component: 100  -  total flux cleaned = 0.0117393 Jy
! Total flux subtracted in 100 components = 0.0117393 Jy
! Clean residual min=-0.003752 max=0.005835 Jy/beam
! Clean residual mean=0.000005 rms=0.000934 Jy/beam
! Combined flux in latest and established models = 0.101422 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 33 components and 0.101422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057034Jy  sigma=1.340514
! Fit after  self-cal, rms=0.056939Jy  sigma=1.338246
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.155 mas, bmaj=2.107 mas, bpa=69.35 degrees
! Estimated noise=0.211316 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00464078 Jy
! Component: 100  -  total flux cleaned = 0.00717636 Jy
! Component: 150  -  total flux cleaned = 0.00825077 Jy
! Component: 200  -  total flux cleaned = 0.00878146 Jy
! Total flux subtracted in 200 components = 0.00878146 Jy
! Clean residual min=-0.002895 max=0.003324 Jy/beam
! Clean residual mean=0.000006 rms=0.000812 Jy/beam
! Combined flux in latest and established models = 0.110203 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 44 components and 0.110203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056545Jy  sigma=1.327483
! Fit after  self-cal, rms=0.056481Jy  sigma=1.326194
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.155 x 2.107 at 69.35 degrees (North through East)
! Clean map  min=-0.0028912  max=0.06409 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.07     KP        0.91     
!   LA        0.95     MK        0.94     NL        1.03     OV        0.94     
!   PT        1.04     SC        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.05     HN        1.06     KP        0.96     
!   LA        0.99     MK        1.13     NL        1.00     OV        0.97     
!   PT        1.12     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        1.06     KP        1.00     
!   LA        0.98     MK        1.12     NL        1.04     OV        1.01     
!   PT        1.12     SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        0.97     KP        0.95     
!   LA        0.95     MK        1.06     NL        0.97     OV        0.97     
!   PT        1.06     SC        1.11     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.02     KP        0.95     
!   LA        0.95     MK        1.06     NL        1.03     OV        0.97     
!   PT        1.08     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        0.96     KP        1.00     
!   LA        0.95     MK        0.97     NL        1.00     OV        1.00     
!   PT        1.13     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        1.02     KP        0.99     
!   LA        0.96     MK        1.12     NL        1.07     OV        1.04     
!   PT        1.10     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.01     HN        0.90     KP        0.97     
!   LA        0.95     MK        0.88     NL        1.05     OV        0.98     
!   PT        1.16     SC        1.08     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.05     HN        0.97     KP        1.02     
!   LA        0.91     MK        0.88     NL        1.03     OV        0.98     
!   PT        1.03     SC        1.07     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.93     KP        0.96     
!   LA        0.90     MK        0.89     NL        0.96     OV        0.97     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        0.97     KP        0.97     
!   LA        0.90     MK        1.01     NL        0.99     OV        0.94     
!   PT        1.09     SC        0.86     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.90     KP        0.98     
!   LA        0.94     MK        0.84     NL        1.03     OV        0.94     
!   PT        0.98     SC        0.84     
! 
! 
! Fit before self-cal, rms=0.056481Jy  sigma=1.326194
! Fit after  self-cal, rms=0.055839Jy  sigma=1.317073
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.153 mas, bmaj=2.104 mas, bpa=69.34 degrees
! Estimated noise=0.210624 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000614344 Jy
! Component: 100  -  total flux cleaned = 0.000891165 Jy
! Component: 150  -  total flux cleaned = 0.00115621 Jy
! Component: 200  -  total flux cleaned = 0.00134322 Jy
! Total flux subtracted in 200 components = 0.00134322 Jy
! Clean residual min=-0.002799 max=0.003385 Jy/beam
! Clean residual mean=0.000001 rms=0.000715 Jy/beam
! Combined flux in latest and established models = 0.111546 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 48 components and 0.111546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055738Jy  sigma=1.314595
! Fit after  self-cal, rms=0.055753Jy  sigma=1.313736
! Inverting map 
! Added new window around map position (6.4, 6.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00364586 Jy
! Component: 100  -  total flux cleaned = 0.00564901 Jy
! Component: 150  -  total flux cleaned = 0.00656751 Jy
! Component: 200  -  total flux cleaned = 0.0071193 Jy
! Total flux subtracted in 200 components = 0.0071193 Jy
! Clean residual min=-0.002383 max=0.002432 Jy/beam
! Clean residual mean=-0.000009 rms=0.000611 Jy/beam
! Combined flux in latest and established models = 0.118666 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 63 components and 0.118666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055475Jy  sigma=1.307162
! Fit after  self-cal, rms=0.055422Jy  sigma=1.305887
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055422Jy  sigma=1.305887
! Fit after  self-cal, rms=0.055592Jy  sigma=1.298025
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.157 mas, bmaj=2.089 mas, bpa=70.33 degrees
! Estimated noise=0.210218 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123693 Jy
! Component: 100  -  total flux cleaned = 0.00182844 Jy
! Component: 150  -  total flux cleaned = 0.00229926 Jy
! Component: 200  -  total flux cleaned = 0.00250468 Jy
! Total flux subtracted in 200 components = 0.00250468 Jy
! Clean residual min=-0.001462 max=0.001796 Jy/beam
! Clean residual mean=0.000001 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.12117 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 73 components and 0.12117 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055512Jy  sigma=1.296161
! Fit after  self-cal, rms=0.055523Jy  sigma=1.295538
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-37.4, 26.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116652 Jy
! Component: 100  -  total flux cleaned = 0.00148874 Jy
! Component: 150  -  total flux cleaned = 0.00156089 Jy
! Component: 200  -  total flux cleaned = 0.00156155 Jy
! Total flux subtracted in 200 components = 0.00156155 Jy
! Clean residual min=-0.001410 max=0.001558 Jy/beam
! Clean residual mean=-0.000000 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.122732 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 80 components and 0.122732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055462Jy  sigma=1.294147
! Fit after  self-cal, rms=0.055451Jy  sigma=1.293859
! Inverting map 
! Added new window around map position (14.2, 6.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00151043 Jy
! Component: 100  -  total flux cleaned = 0.00217917 Jy
! Component: 150  -  total flux cleaned = 0.00256314 Jy
! Component: 200  -  total flux cleaned = 0.0028138 Jy
! Total flux subtracted in 200 components = 0.0028138 Jy
! Clean residual min=-0.001269 max=0.001205 Jy/beam
! Clean residual mean=-0.000000 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.125546 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 93 components and 0.125546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055392Jy  sigma=1.292424
! Fit after  self-cal, rms=0.055374Jy  sigma=1.292234
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055374Jy  sigma=1.292234
! Fit after  self-cal, rms=0.055440Jy  sigma=1.291532
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.154 mas, bmaj=2.078 mas, bpa=70.84 degrees
! Estimated noise=0.209437 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000696966 Jy
! Component: 100  -  total flux cleaned = 0.00102665 Jy
! Component: 150  -  total flux cleaned = 0.00120364 Jy
! Component: 200  -  total flux cleaned = 0.00136715 Jy
! Total flux subtracted in 200 components = 0.00136715 Jy
! Clean residual min=-0.001201 max=0.001129 Jy/beam
! Clean residual mean=0.000000 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.126913 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 101 components and 0.126913 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055404Jy  sigma=1.290696
! Fit after  self-cal, rms=0.055409Jy  sigma=1.290539
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000268321 Jy
! Component: 100  -  total flux cleaned = 0.000407113 Jy
! Component: 150  -  total flux cleaned = 0.000432072 Jy
! Component: 200  -  total flux cleaned = 0.000457518 Jy
! Total flux subtracted in 200 components = 0.000457518 Jy
! Clean residual min=-0.001160 max=0.001073 Jy/beam
! Clean residual mean=-0.000000 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.12737 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 106 components and 0.12737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055383Jy  sigma=1.289957
! Fit after  self-cal, rms=0.055377Jy  sigma=1.289880
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055377Jy  sigma=1.289880
! Fit after  self-cal, rms=0.055238Jy  sigma=1.289697
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.388 mas, bmaj=3.273 mas, bpa=62.48 degrees
! Estimated noise=0.245283 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.34254e-05 Jy
! Component: 100  -  total flux cleaned = -9.00033e-05 Jy
! Component: 150  -  total flux cleaned = -0.000104252 Jy
! Component: 200  -  total flux cleaned = -0.000117649 Jy
! Total flux subtracted in 200 components = -0.000117649 Jy
! Clean residual min=-0.001058 max=0.001004 Jy/beam
! Clean residual mean=-0.000001 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.127253 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 130 components and 0.127253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055232Jy  sigma=1.289540
! Fit after  self-cal, rms=0.055236Jy  sigma=1.289502
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.44566e-05 Jy
! Component: 100  -  total flux cleaned = 3.38889e-05 Jy
! Component: 150  -  total flux cleaned = 9.70663e-06 Jy
! Component: 200  -  total flux cleaned = -2.33606e-05 Jy
! Total flux subtracted in 200 components = -2.33606e-05 Jy
! Clean residual min=-0.001037 max=0.000978 Jy/beam
! Clean residual mean=-0.000001 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.127229 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 137 components and 0.127229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055231Jy  sigma=1.289408
! Fit after  self-cal, rms=0.055230Jy  sigma=1.289396
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.151 mas, bmaj=2.071 mas, bpa=71.08 degrees
! Estimated noise=0.208601 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.151 x 2.071 at 71.08 degrees (North through East)
! Clean map  min=-0.0012165  max=0.060633 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8005 mas, bmaj=1.625 mas, bpa=69.17 degrees
! Estimated noise=0.495053 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0481553 Jy
! Component: 100  -  total flux cleaned = 0.0716477 Jy
! Component: 150  -  total flux cleaned = 0.0850932 Jy
! Component: 200  -  total flux cleaned = 0.0933629 Jy
! Total flux subtracted in 200 components = 0.0933629 Jy
! Clean residual min=-0.004026 max=0.005694 Jy/beam
! Clean residual mean=0.000010 rms=0.000940 Jy/beam
! Combined flux in latest and established models = 0.0933629 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.0933629 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.151 mas, bmaj=2.071 mas, bpa=71.08 degrees
! Estimated noise=0.208601 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00764202 Jy
! Component: 100  -  total flux cleaned = 0.0125875 Jy
! Component: 150  -  total flux cleaned = 0.0163634 Jy
! Component: 200  -  total flux cleaned = 0.0193358 Jy
! Total flux subtracted in 200 components = 0.0193358 Jy
! Clean residual min=-0.001971 max=0.003206 Jy/beam
! Clean residual mean=0.000014 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.112699 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 58 components and 0.112699 Jy
! Inverting map 
! Added new window around map position (-1.2, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00302556 Jy
! Component: 100  -  total flux cleaned = 0.00515019 Jy
! Component: 150  -  total flux cleaned = 0.00690588 Jy
! Component: 200  -  total flux cleaned = 0.00840398 Jy
! Total flux subtracted in 200 components = 0.00840398 Jy
! Clean residual min=-0.001378 max=0.001350 Jy/beam
! Clean residual mean=0.000004 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.121103 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 75 components and 0.121103 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.388 mas, bmaj=3.273 mas, bpa=62.48 degrees
! Estimated noise=0.245283 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00151491 Jy
! Component: 100  -  total flux cleaned = 0.0024695 Jy
! Component: 150  -  total flux cleaned = 0.00317982 Jy
! Component: 200  -  total flux cleaned = 0.00375485 Jy
! Total flux subtracted in 200 components = 0.00375485 Jy
! Clean residual min=-0.001100 max=0.001184 Jy/beam
! Clean residual mean=0.000002 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.124858 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000421543 Jy
! Component: 100  -  total flux cleaned = 0.000723358 Jy
! Component: 150  -  total flux cleaned = 0.0010618 Jy
! Component: 200  -  total flux cleaned = 0.00128571 Jy
! Total flux subtracted in 200 components = 0.00128571 Jy
! Clean residual min=-0.001049 max=0.001077 Jy/beam
! Clean residual mean=0.000000 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.126143 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 137 components and 0.126143 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.151 mas, bmaj=2.071 mas, bpa=71.08 degrees
! Estimated noise=0.208601 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000415232 Jy
! Component: 100  -  total flux cleaned = 0.000775859 Jy
! Component: 150  -  total flux cleaned = 0.000953909 Jy
! Component: 200  -  total flux cleaned = 0.00109215 Jy
! Total flux subtracted in 200 components = 0.00109215 Jy
! Clean residual min=-0.001117 max=0.001040 Jy/beam
! Clean residual mean=-0.000001 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.127235 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 164 components and 0.127235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055233Jy  sigma=1.289503
! Fit after  self-cal, rms=0.055169Jy  sigma=1.288672
wmodel /J1532+6755_X_map.mod
! wmodel: Unable to open new model file: /J1532+6755_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1532+6755_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.151 x 2.071 at 71.08 degrees (North through East)
! Clean map  min=-0.00099708  max=0.058489 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1532+6755_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.058489 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000255407 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.31003 1.31003 2.62005 5.24011 10.4802 20.9604 41.9209 83.8417
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.058 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  229.002 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1532+6755_X_dfm.log closed on Thu May 19 20:24:38 2016