! Started logfile: /scr/pima/bg219b_uvs/J1508-4953_X_dfm.log on Thu May 19 20:23:51 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1508-4953_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1508-4953_X_uva.fits
! AN table 1: 29 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.83908 visibilities/baseline/integration-bin.
! Found source: J1508-4953
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 1752 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1508-4953_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.462577Jy  sigma=18.781467
! Fit after  self-cal, rms=0.108814Jy  sigma=1.314723
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.218 mas, bmaj=54.97 mas, bpa=9.56 degrees
! Estimated noise=1.84712 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.809667 Jy
! Component: 100  -  total flux cleaned = 0.986229 Jy
! Total flux subtracted in 100 components = 0.986229 Jy
! Clean residual min=-0.029734 max=0.049249 Jy/beam
! Clean residual mean=0.000885 rms=0.018546 Jy/beam
! Combined flux in latest and established models = 0.986229 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.986229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.114595Jy  sigma=1.376305
! Fit after  self-cal, rms=0.114591Jy  sigma=1.376278
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.645 mas, bmaj=56.64 mas, bpa=11.02 degrees
! Estimated noise=1.50385 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0453111 Jy
! Component: 100  -  total flux cleaned = 0.0586556 Jy
! Component: 150  -  total flux cleaned = 0.0588009 Jy
! Component: 200  -  total flux cleaned = 0.0587231 Jy
! Total flux subtracted in 200 components = 0.0587231 Jy
! Clean residual min=-0.006478 max=0.006536 Jy/beam
! Clean residual mean=0.000155 rms=0.003114 Jy/beam
! Combined flux in latest and established models = 1.04495 Jy
! Performing phase self-cal
! Adding 98 model components to the UV plane model.
! The established model now contains 98 components and 1.04495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093423Jy  sigma=1.159594
! Fit after  self-cal, rms=0.093386Jy  sigma=1.159454
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.645 x 56.64 at 11.02 degrees (North through East)
! Clean map  min=-0.013253  max=1.0161 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     KP        0.97     LA        1.04     PT        0.99     
! 
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     KP        1.00     LA        1.04     PT        1.04     
! 
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     KP        1.02     LA        1.05     PT        1.03     
! 
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     KP        0.98     LA        1.00     PT        1.01     
! 
! 
! Correcting IF 5.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     KP        0.99     LA        1.00     PT        0.98     
! 
! 
! Correcting IF 6.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     KP        1.00     LA        1.03     PT        1.00     
! 
! 
! Correcting IF 7.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     KP        1.05     LA        1.02     PT        1.05     
! 
! 
! Correcting IF 8.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     KP        1.00     LA        1.01     PT        1.03     
! 
! 
! Correcting IF 9.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     KP        1.01     LA        1.00     PT        0.98     
! 
! 
! Correcting IF 10.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     KP        0.97     LA        0.98     PT        0.97     
! 
! 
! Correcting IF 11.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     KP        0.97     LA        0.97     PT        0.98     
! 
! 
! Correcting IF 12.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     KP        0.96     LA        0.96     PT        0.94     
! 
! 
! Fit before self-cal, rms=0.093386Jy  sigma=1.159454
! Fit after  self-cal, rms=0.076563Jy  sigma=0.977950
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.735 mas, bmaj=56 mas, bpa=10.98 degrees
! Estimated noise=1.57664 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00304282 Jy
! Component: 100  -  total flux cleaned = 0.00305724 Jy
! Component: 150  -  total flux cleaned = 0.00392052 Jy
! Component: 200  -  total flux cleaned = 0.00485597 Jy
! Total flux subtracted in 200 components = 0.00485597 Jy
! Clean residual min=-0.001696 max=0.001711 Jy/beam
! Clean residual mean=-0.000015 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 1.04981 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 145 components and 1.04981 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076195Jy  sigma=0.973221
! Fit after  self-cal, rms=0.076192Jy  sigma=0.973142
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076192Jy  sigma=0.973142
! Fit after  self-cal, rms=0.076159Jy  sigma=0.972856
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.734 mas, bmaj=56 mas, bpa=10.99 degrees
! Estimated noise=1.57642 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000235712 Jy
! Component: 100  -  total flux cleaned = -0.000660416 Jy
! Component: 150  -  total flux cleaned = -0.000950693 Jy
! Component: 200  -  total flux cleaned = -0.00112213 Jy
! Total flux subtracted in 200 components = -0.00112213 Jy
! Clean residual min=-0.000280 max=0.000278 Jy/beam
! Clean residual mean=-0.000006 rms=0.000119 Jy/beam
! Combined flux in latest and established models = 1.04869 Jy
selfcal
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 216 components and 1.04869 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076147Jy  sigma=0.972799
! Fit after  self-cal, rms=0.076148Jy  sigma=0.972792
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000191726 Jy
! Component: 100  -  total flux cleaned = 0.000224392 Jy
! Component: 150  -  total flux cleaned = 0.000288663 Jy
! Component: 200  -  total flux cleaned = 0.000288642 Jy
! Total flux subtracted in 200 components = 0.000288642 Jy
! Clean residual min=-0.000279 max=0.000282 Jy/beam
! Clean residual mean=-0.000006 rms=0.000116 Jy/beam
! Combined flux in latest and established models = 1.04897 Jy
! Performing phase self-cal
! Adding 95 model components to the UV plane model.
! The established model now contains 311 components and 1.04897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076142Jy  sigma=0.972734
! Fit after  self-cal, rms=0.076143Jy  sigma=0.972724
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076143Jy  sigma=0.972724
! Fit after  self-cal, rms=0.076143Jy  sigma=0.972704
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.733 mas, bmaj=56 mas, bpa=10.99 degrees
! Estimated noise=1.57621 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000273574 Jy
! Component: 100  -  total flux cleaned = -0.000471959 Jy
! Component: 150  -  total flux cleaned = -0.000674033 Jy
! Component: 200  -  total flux cleaned = -0.000914011 Jy
! Total flux subtracted in 200 components = -0.000914011 Jy
! Clean residual min=-0.000246 max=0.000244 Jy/beam
! Clean residual mean=-0.000005 rms=0.000102 Jy/beam
! Combined flux in latest and established models = 1.04806 Jy
selfcal
! Performing phase self-cal
! Adding 80 model components to the UV plane model.
! The established model now contains 386 components and 1.04806 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076132Jy  sigma=0.972690
! Fit after  self-cal, rms=0.076132Jy  sigma=0.972684
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000149791 Jy
! Component: 100  -  total flux cleaned = 0.000192352 Jy
! Component: 150  -  total flux cleaned = 0.00022083 Jy
! Component: 200  -  total flux cleaned = 0.000250129 Jy
! Total flux subtracted in 200 components = 0.000250129 Jy
! Clean residual min=-0.000249 max=0.000247 Jy/beam
! Clean residual mean=-0.000004 rms=0.000104 Jy/beam
! Combined flux in latest and established models = 1.04831 Jy
! Performing phase self-cal
! Adding 97 model components to the UV plane model.
! The established model now contains 460 components and 1.04831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076128Jy  sigma=0.972641
! Fit after  self-cal, rms=0.076128Jy  sigma=0.972632
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076128Jy  sigma=0.972632
! Fit after  self-cal, rms=0.076126Jy  sigma=0.972610
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.828 mas, bmaj=55.71 mas, bpa=11.01 degrees
! Estimated noise=1.57688 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000263523 Jy
! Component: 100  -  total flux cleaned = -0.000386598 Jy
! Component: 150  -  total flux cleaned = -0.000552674 Jy
! Component: 200  -  total flux cleaned = -0.000752978 Jy
! Total flux subtracted in 200 components = -0.000752978 Jy
! Clean residual min=-0.000220 max=0.000216 Jy/beam
! Clean residual mean=-0.000004 rms=0.000093 Jy/beam
! Combined flux in latest and established models = 1.04756 Jy
selfcal
! Performing phase self-cal
! Adding 107 model components to the UV plane model.
! The established model now contains 551 components and 1.04756 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076116Jy  sigma=0.972597
! Fit after  self-cal, rms=0.076116Jy  sigma=0.972592
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.91852e-05 Jy
! Component: 100  -  total flux cleaned = 0.000105608 Jy
! Component: 150  -  total flux cleaned = 0.000118645 Jy
! Component: 200  -  total flux cleaned = 0.000132025 Jy
! Total flux subtracted in 200 components = 0.000132025 Jy
! Clean residual min=-0.000230 max=0.000235 Jy/beam
! Clean residual mean=-0.000003 rms=0.000098 Jy/beam
! Combined flux in latest and established models = 1.04769 Jy
! Performing phase self-cal
! Adding 108 model components to the UV plane model.
! The established model now contains 633 components and 1.04769 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076112Jy  sigma=0.972559
! Fit after  self-cal, rms=0.076113Jy  sigma=0.972550
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.732 mas, bmaj=56 mas, bpa=10.99 degrees
! Estimated noise=1.57595 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.732 x 56 at 10.99 degrees (North through East)
! Clean map  min=-0.0074158  max=1.0132 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076113Jy  sigma=0.972550
! Fit after  self-cal, rms=0.056044Jy  sigma=0.676077
! Inverting map and beam 
! Estimated beam: bmin=5.732 mas, bmaj=56.02 mas, bpa=10.99 degrees
! Estimated noise=1.57549 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150273 Jy
! Component: 100  -  total flux cleaned = 0.00136426 Jy
! Component: 150  -  total flux cleaned = 0.00123699 Jy
! Component: 200  -  total flux cleaned = 0.00132336 Jy
! Total flux subtracted in 200 components = 0.00132336 Jy
! Clean residual min=-0.000486 max=0.000490 Jy/beam
! Clean residual mean=0.000005 rms=0.000183 Jy/beam
! Combined flux in latest and established models = 1.04901 Jy
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 690 components and 1.04901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056006Jy  sigma=0.675601
! Fit after  self-cal, rms=0.056006Jy  sigma=0.675555
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000295372 Jy
! Component: 100  -  total flux cleaned = 0.000280999 Jy
! Component: 150  -  total flux cleaned = 0.00026139 Jy
! Component: 200  -  total flux cleaned = 0.000233191 Jy
! Total flux subtracted in 200 components = 0.000233191 Jy
! Clean residual min=-0.000154 max=0.000153 Jy/beam
! Clean residual mean=0.000002 rms=0.000070 Jy/beam
! Combined flux in latest and established models = 1.04925 Jy
! Performing phase self-cal
! Adding 107 model components to the UV plane model.
! The established model now contains 793 components and 1.04925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055998Jy  sigma=0.675499
! Fit after  self-cal, rms=0.056001Jy  sigma=0.675485
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056001Jy  sigma=0.675485
! Fit after  self-cal, rms=0.055972Jy  sigma=0.675328
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.145 mas, bmaj=55.37 mas, bpa=9.579 degrees
! Estimated noise=1.87476 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.801729 Jy
! Component: 100  -  total flux cleaned = 0.976565 Jy
! Component: 150  -  total flux cleaned = 1.02027 Jy
! Component: 200  -  total flux cleaned = 1.03472 Jy
! Total flux subtracted in 200 components = 1.03472 Jy
! Clean residual min=-0.009761 max=0.009907 Jy/beam
! Clean residual mean=0.000093 rms=0.005281 Jy/beam
! Combined flux in latest and established models = 1.03472 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 1.03472 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.733 mas, bmaj=56.02 mas, bpa=10.99 degrees
! Estimated noise=1.57481 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00832832 Jy
! Component: 100  -  total flux cleaned = 0.0129799 Jy
! Component: 150  -  total flux cleaned = 0.0164112 Jy
! Component: 200  -  total flux cleaned = 0.0161766 Jy
! Total flux subtracted in 200 components = 0.0161766 Jy
! Clean residual min=-0.002041 max=0.002043 Jy/beam
! Clean residual mean=0.000018 rms=0.000965 Jy/beam
! Combined flux in latest and established models = 1.0509 Jy
! Adding 77 model components to the UV plane model.
! The established model now contains 106 components and 1.0509 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.829 mas, bmaj=55.73 mas, bpa=11.01 degrees
! Estimated noise=1.57573 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00046315 Jy
! Component: 100  -  total flux cleaned = -0.000713993 Jy
! Component: 150  -  total flux cleaned = -0.00114826 Jy
! Component: 200  -  total flux cleaned = -0.00140751 Jy
! Total flux subtracted in 200 components = -0.00140751 Jy
! Clean residual min=-0.001023 max=0.001009 Jy/beam
! Clean residual mean=-0.000015 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 1.04949 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000298394 Jy
! Component: 100  -  total flux cleaned = -0.000461442 Jy
! Component: 150  -  total flux cleaned = -0.0006179 Jy
! Component: 200  -  total flux cleaned = -0.000568653 Jy
! Total flux subtracted in 200 components = -0.000568653 Jy
! Clean residual min=-0.000842 max=0.000831 Jy/beam
! Clean residual mean=-0.000025 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 1.04893 Jy
! Adding 173 model components to the UV plane model.
! The established model now contains 279 components and 1.04893 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.733 mas, bmaj=56.02 mas, bpa=10.99 degrees
! Estimated noise=1.57481 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000151667 Jy
! Component: 100  -  total flux cleaned = -6.72253e-05 Jy
! Component: 150  -  total flux cleaned = -0.00016059 Jy
! Component: 200  -  total flux cleaned = -0.000315357 Jy
! Total flux subtracted in 200 components = -0.000315357 Jy
! Clean residual min=-0.000509 max=0.000511 Jy/beam
! Clean residual mean=-0.000003 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 1.04861 Jy
selfcal
! Performing phase self-cal
! Adding 70 model components to the UV plane model.
! The established model now contains 349 components and 1.04861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056011Jy  sigma=0.675828
! Fit after  self-cal, rms=0.056017Jy  sigma=0.675745
wmodel /J1508-4953_X_map.mod
! wmodel: Unable to open new model file: /J1508-4953_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1508-4953_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.733 x 56.02 at 10.99 degrees (North through East)
! Clean map  min=-0.0053185  max=1.0158 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1508-4953_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.01579 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000225297 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0665386 0.0665386 0.133077 0.266155 0.532309 1.06462 2.12924 4.25847 8.51694 17.0339 34.0678 68.1356
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.015 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  4508.66 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1508-4953_X_dfm.log closed on Thu May 19 20:23:58 2016