! Started logfile: /scr/pima/bg219b_uvs/J1445-1629_X_uvs.log on Thu Apr  7 01:56:54 2016
obs /scr/pima/bg219b_uvs/J1445-1629_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1445-1629_X_uva.fits
! AN table 1: 27 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.742387 visibilities/baseline/integration-bin.
! Found source: J1445-1629
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 10824 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J1445-1629_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.019989Jy  sigma=23.542307
! Fit after  self-cal, rms=0.783613Jy  sigma=17.923311
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7108 mas, bmaj=1.779 mas, bpa=-2.64 degrees
! Estimated noise=0.668052 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.152205 Jy
! Component: 100  -  total flux cleaned = 0.197532 Jy
! Total flux subtracted in 100 components = 0.197532 Jy
! Clean residual min=-0.017316 max=0.056609 Jy/beam
! Clean residual mean=-0.000008 rms=0.004685 Jy/beam
! Combined flux in latest and established models = 0.197532 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.197532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.112623Jy  sigma=2.564884
! Fit after  self-cal, rms=0.112309Jy  sigma=2.556971
! Inverting map 
! Added new window around map position (1.2, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0472446 Jy
! Component: 100  -  total flux cleaned = 0.071773 Jy
! Total flux subtracted in 100 components = 0.071773 Jy
! Clean residual min=-0.011867 max=0.017365 Jy/beam
! Clean residual mean=-0.000006 rms=0.002824 Jy/beam
! Combined flux in latest and established models = 0.269305 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 24 components and 0.269305 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.081092Jy  sigma=1.820196
! Fit after  self-cal, rms=0.078279Jy  sigma=1.753101
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0210389 Jy
! Component: 100  -  total flux cleaned = 0.0339101 Jy
! Total flux subtracted in 100 components = 0.0339101 Jy
! Clean residual min=-0.008726 max=0.010125 Jy/beam
! Clean residual mean=-0.000003 rms=0.001753 Jy/beam
! Combined flux in latest and established models = 0.303215 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 39 components and 0.303215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069117Jy  sigma=1.530350
! Fit after  self-cal, rms=0.068435Jy  sigma=1.515066
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112545 Jy
! Component: 100  -  total flux cleaned = 0.0183619 Jy
! Total flux subtracted in 100 components = 0.0183619 Jy
! Clean residual min=-0.007298 max=0.007306 Jy/beam
! Clean residual mean=-0.000002 rms=0.001352 Jy/beam
! Combined flux in latest and established models = 0.321577 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 49 components and 0.321577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065553Jy  sigma=1.445868
! Fit after  self-cal, rms=0.065281Jy  sigma=1.440384
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9353 mas, bmaj=2.308 mas, bpa=-2.383 degrees
! Estimated noise=0.424415 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00854359 Jy
! Component: 100  -  total flux cleaned = 0.0126725 Jy
! Component: 150  -  total flux cleaned = 0.014434 Jy
! Component: 200  -  total flux cleaned = 0.0149339 Jy
! Total flux subtracted in 200 components = 0.0149339 Jy
! Clean residual min=-0.004310 max=0.004407 Jy/beam
! Clean residual mean=-0.000002 rms=0.000982 Jy/beam
! Combined flux in latest and established models = 0.33651 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 60 components and 0.33651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064184Jy  sigma=1.415440
! Fit after  self-cal, rms=0.064033Jy  sigma=1.412175
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9353 x 2.308 at -2.383 degrees (North through East)
! Clean map  min=-0.0040452  max=0.1954 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.10     KP        0.94     
!   LA        0.99     MK        0.97     NL        1.00     OV        0.99     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.09     KP        0.97     
!   LA        1.00     MK        0.98     NL        1.01     OV        1.06     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.11     KP        1.01     
!   LA        1.01     MK        0.97     NL        1.02     OV        1.03     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.98     HN        1.06     KP        0.96     
!   LA        1.00     MK        0.99     NL        1.01     OV        1.02     
!   PT        0.98     SC        0.99     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.03     KP        0.96     
!   LA        1.01     MK        0.97     NL        1.02     OV        1.01     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.10     KP        1.00     
!   LA        1.03     MK        0.96     NL        1.01     OV        1.01     
!   PT        1.04     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.02     KP        0.97     
!   LA        1.00     MK        1.01     NL        0.99     OV        1.01     
!   PT        0.99     SC        0.95     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064033Jy  sigma=1.412175
! Fit after  self-cal, rms=0.064193Jy  sigma=1.391275
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9334 mas, bmaj=2.295 mas, bpa=-2.402 degrees
! Estimated noise=0.424625 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0013574 Jy
! Component: 100  -  total flux cleaned = -0.00127906 Jy
! Component: 150  -  total flux cleaned = -0.00121138 Jy
! Component: 200  -  total flux cleaned = -0.00115219 Jy
! Total flux subtracted in 200 components = -0.00115219 Jy
! Clean residual min=-0.003479 max=0.003041 Jy/beam
! Clean residual mean=0.000003 rms=0.000805 Jy/beam
! Combined flux in latest and established models = 0.335358 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 62 components and 0.335358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064009Jy  sigma=1.387718
! Fit after  self-cal, rms=0.063985Jy  sigma=1.387198
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063985Jy  sigma=1.387198
! Fit after  self-cal, rms=0.064114Jy  sigma=1.378267
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9331 mas, bmaj=2.302 mas, bpa=-2.34 degrees
! Estimated noise=0.4234 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000241078 Jy
! Component: 100  -  total flux cleaned = -0.000185799 Jy
! Component: 150  -  total flux cleaned = -0.000229896 Jy
! Component: 200  -  total flux cleaned = -0.00030083 Jy
! Total flux subtracted in 200 components = -0.00030083 Jy
! Clean residual min=-0.003106 max=0.002965 Jy/beam
! Clean residual mean=0.000002 rms=0.000712 Jy/beam
! Combined flux in latest and established models = 0.335057 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 64 components and 0.335057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064026Jy  sigma=1.376667
! Fit after  self-cal, rms=0.064007Jy  sigma=1.376126
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000242646 Jy
! Component: 100  -  total flux cleaned = -0.000154995 Jy
! Component: 150  -  total flux cleaned = -0.000188032 Jy
! Component: 200  -  total flux cleaned = -0.000219041 Jy
! Total flux subtracted in 200 components = -0.000219041 Jy
! Clean residual min=-0.003059 max=0.002926 Jy/beam
! Clean residual mean=0.000002 rms=0.000697 Jy/beam
! Combined flux in latest and established models = 0.334838 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 66 components and 0.334838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063946Jy  sigma=1.375010
! Fit after  self-cal, rms=0.063922Jy  sigma=1.374638
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063922Jy  sigma=1.374638
! Fit after  self-cal, rms=0.063152Jy  sigma=1.377302
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9302 mas, bmaj=2.29 mas, bpa=-2.135 degrees
! Estimated noise=0.419359 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00184723 Jy
! Component: 100  -  total flux cleaned = -0.00195013 Jy
! Component: 150  -  total flux cleaned = -0.00195144 Jy
! Component: 200  -  total flux cleaned = -0.00202131 Jy
! Total flux subtracted in 200 components = -0.00202131 Jy
! Clean residual min=-0.003177 max=0.002851 Jy/beam
! Clean residual mean=0.000001 rms=0.000697 Jy/beam
! Combined flux in latest and established models = 0.332817 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 69 components and 0.332817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063064Jy  sigma=1.375395
! Fit after  self-cal, rms=0.063036Jy  sigma=1.374973
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000255084 Jy
! Component: 100  -  total flux cleaned = -0.00025412 Jy
! Component: 150  -  total flux cleaned = -0.000253528 Jy
! Component: 200  -  total flux cleaned = -0.000310539 Jy
! Total flux subtracted in 200 components = -0.000310539 Jy
! Clean residual min=-0.003066 max=0.002802 Jy/beam
! Clean residual mean=0.000001 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 0.332506 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 69 components and 0.332506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062985Jy  sigma=1.373948
! Fit after  self-cal, rms=0.062967Jy  sigma=1.373626
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062967Jy  sigma=1.373626
! Fit after  self-cal, rms=0.062538Jy  sigma=1.374617
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.28 mas, bmaj=4.439 mas, bpa=-1.108 degrees
! Estimated noise=0.510966 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00110056 Jy
! Component: 100  -  total flux cleaned = -0.00120865 Jy
! Component: 150  -  total flux cleaned = -0.00128356 Jy
! Component: 200  -  total flux cleaned = -0.00131998 Jy
! Total flux subtracted in 200 components = -0.00131998 Jy
! Clean residual min=-0.002986 max=0.003398 Jy/beam
! Clean residual mean=0.000003 rms=0.000844 Jy/beam
! Combined flux in latest and established models = 0.331186 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 78 components and 0.331186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062526Jy  sigma=1.374417
! Fit after  self-cal, rms=0.062511Jy  sigma=1.374057
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000267198 Jy
! Component: 100  -  total flux cleaned = 0.000222185 Jy
! Component: 150  -  total flux cleaned = 0.000187021 Jy
! Component: 200  -  total flux cleaned = 0.00014268 Jy
! Total flux subtracted in 200 components = 0.00014268 Jy
! Clean residual min=-0.002943 max=0.003387 Jy/beam
! Clean residual mean=0.000003 rms=0.000839 Jy/beam
! Combined flux in latest and established models = 0.331329 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 83 components and 0.331329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062501Jy  sigma=1.373913
! Fit after  self-cal, rms=0.062493Jy  sigma=1.373743
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9296 mas, bmaj=2.285 mas, bpa=-2.022 degrees
! Estimated noise=0.41684 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9296 x 2.285 at -2.022 degrees (North through East)
! Clean map  min=-0.0028254  max=0.19299 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7065 mas, bmaj=1.763 mas, bpa=-2.222 degrees
! Estimated noise=0.651336 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.152978 Jy
! Component: 100  -  total flux cleaned = 0.215202 Jy
! Component: 150  -  total flux cleaned = 0.248383 Jy
! Component: 200  -  total flux cleaned = 0.269473 Jy
! Total flux subtracted in 200 components = 0.269473 Jy
! Clean residual min=-0.006414 max=0.011361 Jy/beam
! Clean residual mean=-0.000001 rms=0.001689 Jy/beam
! Combined flux in latest and established models = 0.269473 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.269473 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9296 mas, bmaj=2.285 mas, bpa=-2.022 degrees
! Estimated noise=0.41684 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0242266 Jy
! Component: 100  -  total flux cleaned = 0.0375813 Jy
! Component: 150  -  total flux cleaned = 0.0456778 Jy
! Component: 200  -  total flux cleaned = 0.0506431 Jy
! Total flux subtracted in 200 components = 0.0506431 Jy
! Clean residual min=-0.003408 max=0.003059 Jy/beam
! Clean residual mean=-0.000001 rms=0.000785 Jy/beam
! Combined flux in latest and established models = 0.320116 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 47 components and 0.320116 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.28 mas, bmaj=4.439 mas, bpa=-1.108 degrees
! Estimated noise=0.510966 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00459158 Jy
! Component: 100  -  total flux cleaned = 0.00683953 Jy
! Component: 150  -  total flux cleaned = 0.00803825 Jy
! Component: 200  -  total flux cleaned = 0.00868421 Jy
! Total flux subtracted in 200 components = 0.00868421 Jy
! Clean residual min=-0.003182 max=0.003213 Jy/beam
! Clean residual mean=0.000004 rms=0.000853 Jy/beam
! Combined flux in latest and established models = 0.3288 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000121256 Jy
! Component: 100  -  total flux cleaned = 0.000200478 Jy
! Component: 150  -  total flux cleaned = 0.000275008 Jy
! Component: 200  -  total flux cleaned = 0.000344932 Jy
! Total flux subtracted in 200 components = 0.000344932 Jy
! Clean residual min=-0.003140 max=0.003227 Jy/beam
! Clean residual mean=0.000004 rms=0.000846 Jy/beam
! Combined flux in latest and established models = 0.329145 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 62 components and 0.329145 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9296 mas, bmaj=2.285 mas, bpa=-2.022 degrees
! Estimated noise=0.41684 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000491481 Jy
! Component: 100  -  total flux cleaned = -0.000641961 Jy
! Component: 150  -  total flux cleaned = -0.00070378 Jy
! Component: 200  -  total flux cleaned = -0.000758797 Jy
! Total flux subtracted in 200 components = -0.000758797 Jy
! Clean residual min=-0.003005 max=0.002452 Jy/beam
! Clean residual mean=0.000002 rms=0.000664 Jy/beam
! Combined flux in latest and established models = 0.328386 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 65 components and 0.328386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062379Jy  sigma=1.371760
! Fit after  self-cal, rms=0.062346Jy  sigma=1.370846
wmodel /scr/pima/bg219b_uvs/J1445-1629_X_map.mod
! Writing 65 model components to file: /scr/pima/bg219b_uvs/J1445-1629_X_map.mod
wobs /scr/pima/bg219b_uvs/J1445-1629_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J1445-1629_X_uvs.fits
wwins /scr/pima/bg219b_uvs/J1445-1629_X_map.win
! wwins: Wrote 2 windows to /scr/pima/bg219b_uvs/J1445-1629_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0012728 Jy
! Component: 100  -  total flux cleaned = -0.00178789 Jy
! Component: 150  -  total flux cleaned = -0.00213877 Jy
! Component: 200  -  total flux cleaned = -0.00251396 Jy
! Component: 250  -  total flux cleaned = -0.00283608 Jy
! Component: 300  -  total flux cleaned = -0.00318562 Jy
! Component: 350  -  total flux cleaned = -0.00344886 Jy
! Component: 400  -  total flux cleaned = -0.00377782 Jy
! Component: 450  -  total flux cleaned = -0.00406213 Jy
! Component: 500  -  total flux cleaned = -0.00444218 Jy
! Component: 550  -  total flux cleaned = -0.00484551 Jy
! Component: 600  -  total flux cleaned = -0.00513964 Jy
! Component: 650  -  total flux cleaned = -0.00539588 Jy
! Component: 700  -  total flux cleaned = -0.00555266 Jy
! Component: 750  -  total flux cleaned = -0.0056754 Jy
! Component: 800  -  total flux cleaned = -0.00576535 Jy
! Component: 850  -  total flux cleaned = -0.00591293 Jy
! Component: 900  -  total flux cleaned = -0.00602813 Jy
! Component: 950  -  total flux cleaned = -0.00602836 Jy
! Component: 1000  -  total flux cleaned = -0.00616782 Jy
! Component: 1050  -  total flux cleaned = -0.00625001 Jy
! Component: 1100  -  total flux cleaned = -0.00638446 Jy
! Component: 1150  -  total flux cleaned = -0.0064901 Jy
! Component: 1200  -  total flux cleaned = -0.00659441 Jy
! Component: 1250  -  total flux cleaned = -0.0066205 Jy
! Component: 1300  -  total flux cleaned = -0.00672209 Jy
! Component: 1350  -  total flux cleaned = -0.00674695 Jy
! Component: 1400  -  total flux cleaned = -0.00674699 Jy
! Component: 1450  -  total flux cleaned = -0.00674741 Jy
! Component: 1500  -  total flux cleaned = -0.00681962 Jy
! Component: 1550  -  total flux cleaned = -0.0067728 Jy
! Component: 1600  -  total flux cleaned = -0.00681962 Jy
! Component: 1650  -  total flux cleaned = -0.00681989 Jy
! Component: 1700  -  total flux cleaned = -0.00679754 Jy
! Component: 1750  -  total flux cleaned = -0.00681992 Jy
! Component: 1800  -  total flux cleaned = -0.00670854 Jy
! Component: 1850  -  total flux cleaned = -0.00666467 Jy
! Component: 1900  -  total flux cleaned = -0.00668621 Jy
! Component: 1950  -  total flux cleaned = -0.00659993 Jy
! Component: 2000  -  total flux cleaned = -0.0065149 Jy
! Component: 2050  -  total flux cleaned = -0.00649382 Jy
! Component: 2100  -  total flux cleaned = -0.00641041 Jy
! Component: 2150  -  total flux cleaned = -0.00641061 Jy
! Component: 2200  -  total flux cleaned = -0.00637015 Jy
! Component: 2250  -  total flux cleaned = -0.00641075 Jy
! Component: 2300  -  total flux cleaned = -0.00639083 Jy
! Component: 2350  -  total flux cleaned = -0.00639083 Jy
! Component: 2400  -  total flux cleaned = -0.00635185 Jy
! Component: 2450  -  total flux cleaned = -0.00633234 Jy
! Component: 2500  -  total flux cleaned = -0.00625502 Jy
! Component: 2550  -  total flux cleaned = -0.00637041 Jy
! Component: 2600  -  total flux cleaned = -0.00638918 Jy
! Component: 2650  -  total flux cleaned = -0.00644561 Jy
! Component: 2700  -  total flux cleaned = -0.00646426 Jy
! Component: 2750  -  total flux cleaned = -0.00644576 Jy
! Component: 2800  -  total flux cleaned = -0.00644591 Jy
! Component: 2850  -  total flux cleaned = -0.00653729 Jy
! Component: 2900  -  total flux cleaned = -0.00657343 Jy
! Component: 2950  -  total flux cleaned = -0.0065554 Jy
! Component: 3000  -  total flux cleaned = -0.0065909 Jy
! Component: 3050  -  total flux cleaned = -0.00664374 Jy
! Component: 3100  -  total flux cleaned = -0.0066788 Jy
! Component: 3150  -  total flux cleaned = -0.00662655 Jy
! Component: 3200  -  total flux cleaned = -0.00666103 Jy
! Component: 3250  -  total flux cleaned = -0.00667814 Jy
! Component: 3300  -  total flux cleaned = -0.00667826 Jy
! Component: 3350  -  total flux cleaned = -0.00676271 Jy
! Component: 3400  -  total flux cleaned = -0.00676257 Jy
! Component: 3450  -  total flux cleaned = -0.0067293 Jy
! Component: 3500  -  total flux cleaned = -0.00667963 Jy
! Component: 3550  -  total flux cleaned = -0.0066962 Jy
! Component: 3600  -  total flux cleaned = -0.00677785 Jy
! Component: 3650  -  total flux cleaned = -0.00677765 Jy
! Component: 3700  -  total flux cleaned = -0.00682616 Jy
! Component: 3750  -  total flux cleaned = -0.0068261 Jy
! Component: 3800  -  total flux cleaned = -0.00687362 Jy
! Component: 3850  -  total flux cleaned = -0.00677867 Jy
! Component: 3900  -  total flux cleaned = -0.00684144 Jy
! Component: 3950  -  total flux cleaned = -0.00684145 Jy
! Component: 4000  -  total flux cleaned = -0.00690338 Jy
! Component: 4050  -  total flux cleaned = -0.00685689 Jy
! Total flux subtracted in 4096 components = -0.00687229 Jy
! Clean residual min=-0.001025 max=0.000976 Jy/beam
! Clean residual mean=0.000003 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.321514 Jy
keep
! Adding 306 model components to the UV plane model.
! The established model now contains 371 components and 0.321514 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J1445-1629_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9296 x 2.285 at -2.022 degrees (North through East)
! Clean map  min=-0.0021489  max=0.19718 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1445-1629_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.197177 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000264503 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.402436 0.402436 0.804872 1.60974 3.21949 6.43898 12.878 25.7559 51.5118
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.197 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  745.46 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1445-1629_X_uvs.log closed on Thu Apr  7 01:56:58 2016