! Started logfile: /scr/pima/bg219b_uvs/J1445-1629_X_dfm.log on Thu May 19 20:23:17 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1445-1629_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1445-1629_X_uva.fits
! AN table 1: 27 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.742387 visibilities/baseline/integration-bin.
! Found source: J1445-1629
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 10824 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1445-1629_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019007Jy  sigma=22.770387
! Fit after  self-cal, rms=0.777291Jy  sigma=17.173335
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6812 mas, bmaj=1.722 mas, bpa=-2.454 degrees
! Estimated noise=0.565008 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.153933 Jy
! Component: 100  -  total flux cleaned = 0.198747 Jy
! Total flux subtracted in 100 components = 0.198747 Jy
! Clean residual min=-0.016079 max=0.056289 Jy/beam
! Clean residual mean=-0.000025 rms=0.004106 Jy/beam
! Combined flux in latest and established models = 0.198747 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.198747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.119716Jy  sigma=2.606689
! Fit after  self-cal, rms=0.119541Jy  sigma=2.601715
! Inverting map 
! Added new window around map position (1.2, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0471962 Jy
! Component: 100  -  total flux cleaned = 0.0719088 Jy
! Total flux subtracted in 100 components = 0.0719088 Jy
! Clean residual min=-0.011470 max=0.017313 Jy/beam
! Clean residual mean=-0.000015 rms=0.002491 Jy/beam
! Combined flux in latest and established models = 0.270656 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 21 components and 0.270656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088455Jy  sigma=1.891723
! Fit after  self-cal, rms=0.085516Jy  sigma=1.823839
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.021418 Jy
! Component: 100  -  total flux cleaned = 0.0350607 Jy
! Total flux subtracted in 100 components = 0.0350607 Jy
! Clean residual min=-0.008591 max=0.010105 Jy/beam
! Clean residual mean=-0.000008 rms=0.001589 Jy/beam
! Combined flux in latest and established models = 0.305717 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 38 components and 0.305717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075698Jy  sigma=1.594757
! Fit after  self-cal, rms=0.074950Jy  sigma=1.578798
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120466 Jy
! Component: 100  -  total flux cleaned = 0.0199754 Jy
! Total flux subtracted in 100 components = 0.0199754 Jy
! Clean residual min=-0.006844 max=0.007192 Jy/beam
! Clean residual mean=-0.000005 rms=0.001230 Jy/beam
! Combined flux in latest and established models = 0.325692 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 49 components and 0.325692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071524Jy  sigma=1.500627
! Fit after  self-cal, rms=0.071232Jy  sigma=1.494824
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9288 mas, bmaj=2.292 mas, bpa=-2.369 degrees
! Estimated noise=0.33631 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104338 Jy
! Component: 100  -  total flux cleaned = 0.0157044 Jy
! Component: 150  -  total flux cleaned = 0.0186839 Jy
! Component: 200  -  total flux cleaned = 0.0197146 Jy
! Total flux subtracted in 200 components = 0.0197146 Jy
! Clean residual min=-0.004118 max=0.004236 Jy/beam
! Clean residual mean=-0.000003 rms=0.000935 Jy/beam
! Combined flux in latest and established models = 0.345407 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 62 components and 0.345407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069680Jy  sigma=1.462528
! Fit after  self-cal, rms=0.069535Jy  sigma=1.459573
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9288 x 2.292 at -2.369 degrees (North through East)
! Clean map  min=-0.0036668  max=0.20125 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.12     KP        0.95     
!   LA        1.01     MK        0.98     NL        1.02     OV        1.01     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.11     KP        0.99     
!   LA        1.01     MK        0.99     NL        1.02     OV        1.08     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.05     HN        1.13     KP        1.02     
!   LA        1.03     MK        0.99     NL        1.04     OV        1.05     
!   PT        1.01     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        1.07     KP        0.97     
!   LA        1.01     MK        1.00     NL        1.03     OV        1.03     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.08     KP        0.96     
!   LA        0.97     MK        0.99     NL        1.00     OV        1.00     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.05     KP        0.97     
!   LA        1.02     MK        0.98     NL        1.03     OV        1.02     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.11     KP        1.02     
!   LA        1.05     MK        0.97     NL        1.02     OV        1.03     
!   PT        1.05     SC        1.08     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.04     KP        0.98     
!   LA        1.01     MK        1.02     NL        1.00     OV        1.02     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.06     KP        0.98     
!   LA        0.99     MK        0.98     NL        1.03     OV        1.01     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        1.00     KP        0.95     
!   LA        0.98     MK        0.94     NL        0.98     OV        0.99     
!   PT        0.94     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        1.04     KP        0.95     
!   LA        0.95     MK        1.03     NL        1.01     OV        1.02     
!   PT        0.94     SC        0.89     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.96     HN        0.91     KP        0.94     
!   LA        0.97     MK        0.96     NL        0.97     OV        0.94     
!   PT        0.93     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.069535Jy  sigma=1.459573
! Fit after  self-cal, rms=0.068136Jy  sigma=1.424852
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9279 mas, bmaj=2.282 mas, bpa=-2.288 degrees
! Estimated noise=0.336443 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00133083 Jy
! Component: 100  -  total flux cleaned = -0.00133439 Jy
! Component: 150  -  total flux cleaned = -0.00127215 Jy
! Component: 200  -  total flux cleaned = -0.00121733 Jy
! Total flux subtracted in 200 components = -0.00121733 Jy
! Clean residual min=-0.003289 max=0.003110 Jy/beam
! Clean residual mean=0.000004 rms=0.000722 Jy/beam
! Combined flux in latest and established models = 0.344189 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 63 components and 0.344189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067972Jy  sigma=1.421782
! Fit after  self-cal, rms=0.067943Jy  sigma=1.421317
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067943Jy  sigma=1.421317
! Fit after  self-cal, rms=0.068095Jy  sigma=1.412202
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9276 mas, bmaj=2.289 mas, bpa=-2.276 degrees
! Estimated noise=0.335373 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000157489 Jy
! Component: 100  -  total flux cleaned = -0.000202389 Jy
! Component: 150  -  total flux cleaned = -0.000241968 Jy
! Component: 200  -  total flux cleaned = -0.000275154 Jy
! Total flux subtracted in 200 components = -0.000275154 Jy
! Clean residual min=-0.003123 max=0.002681 Jy/beam
! Clean residual mean=0.000003 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.343914 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 68 components and 0.343914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068024Jy  sigma=1.410872
! Fit after  self-cal, rms=0.068008Jy  sigma=1.410443
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000227845 Jy
! Component: 100  -  total flux cleaned = -0.00018956 Jy
! Component: 150  -  total flux cleaned = -0.000188546 Jy
! Component: 200  -  total flux cleaned = -0.000246751 Jy
! Total flux subtracted in 200 components = -0.000246751 Jy
! Clean residual min=-0.003070 max=0.002633 Jy/beam
! Clean residual mean=0.000003 rms=0.000620 Jy/beam
! Combined flux in latest and established models = 0.343667 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 69 components and 0.343667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067961Jy  sigma=1.409578
! Fit after  self-cal, rms=0.067938Jy  sigma=1.409293
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067938Jy  sigma=1.409293
! Fit after  self-cal, rms=0.067154Jy  sigma=1.411758
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9252 mas, bmaj=2.277 mas, bpa=-2.032 degrees
! Estimated noise=0.332301 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00193211 Jy
! Component: 100  -  total flux cleaned = -0.00198342 Jy
! Component: 150  -  total flux cleaned = -0.00202831 Jy
! Component: 200  -  total flux cleaned = -0.00209618 Jy
! Total flux subtracted in 200 components = -0.00209618 Jy
! Clean residual min=-0.002981 max=0.002662 Jy/beam
! Clean residual mean=0.000001 rms=0.000623 Jy/beam
! Combined flux in latest and established models = 0.341571 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 72 components and 0.341571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067074Jy  sigma=1.410090
! Fit after  self-cal, rms=0.067048Jy  sigma=1.409738
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000296128 Jy
! Component: 100  -  total flux cleaned = -0.000256072 Jy
! Component: 150  -  total flux cleaned = -0.000287579 Jy
! Component: 200  -  total flux cleaned = -0.000312464 Jy
! Total flux subtracted in 200 components = -0.000312464 Jy
! Clean residual min=-0.002913 max=0.002630 Jy/beam
! Clean residual mean=0.000001 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.341259 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 72 components and 0.341259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067007Jy  sigma=1.408929
! Fit after  self-cal, rms=0.066989Jy  sigma=1.408668
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066989Jy  sigma=1.408668
! Fit after  self-cal, rms=0.066558Jy  sigma=1.409553
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.276 mas, bmaj=4.438 mas, bpa=-1.126 degrees
! Estimated noise=0.403876 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00120442 Jy
! Component: 100  -  total flux cleaned = -0.00130336 Jy
! Component: 150  -  total flux cleaned = -0.00137239 Jy
! Component: 200  -  total flux cleaned = -0.00140644 Jy
! Total flux subtracted in 200 components = -0.00140644 Jy
! Clean residual min=-0.002935 max=0.003475 Jy/beam
! Clean residual mean=0.000002 rms=0.000825 Jy/beam
! Combined flux in latest and established models = 0.339852 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 83 components and 0.339852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066546Jy  sigma=1.409281
! Fit after  self-cal, rms=0.066533Jy  sigma=1.409048
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000238658 Jy
! Component: 100  -  total flux cleaned = 0.00019926 Jy
! Component: 150  -  total flux cleaned = 0.000149464 Jy
! Component: 200  -  total flux cleaned = 0.000121428 Jy
! Total flux subtracted in 200 components = 0.000121428 Jy
! Clean residual min=-0.002931 max=0.003468 Jy/beam
! Clean residual mean=0.000002 rms=0.000820 Jy/beam
! Combined flux in latest and established models = 0.339974 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 85 components and 0.339974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066524Jy  sigma=1.408883
! Fit after  self-cal, rms=0.066517Jy  sigma=1.408766
! Inverting map 
! Added new window around map position (29, -39.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00298298 Jy
! Component: 100  -  total flux cleaned = 0.00379111 Jy
! Component: 150  -  total flux cleaned = 0.0042246 Jy
! Component: 200  -  total flux cleaned = 0.0045513 Jy
! Total flux subtracted in 200 components = 0.0045513 Jy
! Clean residual min=-0.002414 max=0.001975 Jy/beam
! Clean residual mean=0.000002 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.344525 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 128 components and 0.344525 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066414Jy  sigma=1.406292
! Fit after  self-cal, rms=0.066406Jy  sigma=1.406131
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9248 mas, bmaj=2.272 mas, bpa=-1.907 degrees
! Estimated noise=0.330386 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9248 x 2.272 at -1.907 degrees (North through East)
! Clean map  min=-0.0023737  max=0.19897 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6796 mas, bmaj=1.71 mas, bpa=-1.913 degrees
! Estimated noise=0.550732 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.153854 Jy
! Component: 100  -  total flux cleaned = 0.21634 Jy
! Component: 150  -  total flux cleaned = 0.249925 Jy
! Component: 200  -  total flux cleaned = 0.271496 Jy
! Total flux subtracted in 200 components = 0.271496 Jy
! Clean residual min=-0.005987 max=0.011608 Jy/beam
! Clean residual mean=-0.000009 rms=0.001569 Jy/beam
! Combined flux in latest and established models = 0.271495 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.271495 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9248 mas, bmaj=2.272 mas, bpa=-1.907 degrees
! Estimated noise=0.330386 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0274512 Jy
! Component: 100  -  total flux cleaned = 0.0421477 Jy
! Component: 150  -  total flux cleaned = 0.0509527 Jy
! Component: 200  -  total flux cleaned = 0.056373 Jy
! Total flux subtracted in 200 components = 0.056373 Jy
! Clean residual min=-0.003094 max=0.003452 Jy/beam
! Clean residual mean=-0.000002 rms=0.000757 Jy/beam
! Combined flux in latest and established models = 0.327868 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 53 components and 0.327868 Jy
! Inverting map 
! Added new window around map position (1.2, 3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00373971 Jy
! Component: 100  -  total flux cleaned = 0.00647275 Jy
! Component: 150  -  total flux cleaned = 0.0085956 Jy
! Component: 200  -  total flux cleaned = 0.0101046 Jy
! Total flux subtracted in 200 components = 0.0101046 Jy
! Clean residual min=-0.002662 max=0.002245 Jy/beam
! Clean residual mean=0.000000 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.337973 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 72 components and 0.337973 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.276 mas, bmaj=4.438 mas, bpa=-1.126 degrees
! Estimated noise=0.403876 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00224758 Jy
! Component: 100  -  total flux cleaned = 0.00353981 Jy
! Component: 150  -  total flux cleaned = 0.00436481 Jy
! Component: 200  -  total flux cleaned = 0.0050534 Jy
! Total flux subtracted in 200 components = 0.0050534 Jy
! Clean residual min=-0.002760 max=0.002038 Jy/beam
! Clean residual mean=0.000003 rms=0.000673 Jy/beam
! Combined flux in latest and established models = 0.343026 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000252313 Jy
! Component: 100  -  total flux cleaned = 0.000417965 Jy
! Component: 150  -  total flux cleaned = 0.000570999 Jy
! Component: 200  -  total flux cleaned = 0.000656088 Jy
! Total flux subtracted in 200 components = 0.000656088 Jy
! Clean residual min=-0.002671 max=0.001989 Jy/beam
! Clean residual mean=0.000003 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.343682 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 123 components and 0.343682 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9248 mas, bmaj=2.272 mas, bpa=-1.907 degrees
! Estimated noise=0.330386 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.92493e-05 Jy
! Component: 100  -  total flux cleaned = 7.82233e-06 Jy
! Component: 150  -  total flux cleaned = -2.99788e-05 Jy
! Component: 200  -  total flux cleaned = 6.77442e-06 Jy
! Total flux subtracted in 200 components = 6.77442e-06 Jy
! Clean residual min=-0.002114 max=0.002107 Jy/beam
! Clean residual mean=0.000002 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.343689 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 149 components and 0.343689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066211Jy  sigma=1.402431
! Fit after  self-cal, rms=0.066177Jy  sigma=1.401764
wmodel /J1445-1629_X_map.mod
! wmodel: Unable to open new model file: /J1445-1629_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1445-1629_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9248 x 2.272 at -1.907 degrees (North through East)
! Clean map  min=-0.0020934  max=0.20337 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1445-1629_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.203374 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000495084 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.730307 0.730307 1.46061 2.92123 5.84245 11.6849 23.3698 46.7396 93.4793
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.203 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  410.786 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1445-1629_X_dfm.log closed on Thu May 19 20:23:20 2016