! Started logfile: /scr/pima/bg219b_uvs/J1441-1523_X_uvs.log on Thu Apr  7 01:56:49 2016
obs /scr/pima/bg219b_uvs/J1441-1523_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1441-1523_X_uva.fits
! AN table 1: 51 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.877996 visibilities/baseline/integration-bin.
! Found source: J1441-1523
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24180 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J1441-1523_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.006346Jy  sigma=23.876043
! Fit after  self-cal, rms=0.893154Jy  sigma=21.184199
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6763 mas, bmaj=1.68 mas, bpa=-0.7959 degrees
! Estimated noise=0.477164 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0808697 Jy
! Component: 100  -  total flux cleaned = 0.100649 Jy
! Total flux subtracted in 100 components = 0.100649 Jy
! Clean residual min=-0.004128 max=0.008304 Jy/beam
! Clean residual mean=-0.000005 rms=0.001072 Jy/beam
! Combined flux in latest and established models = 0.100649 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.100649 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063073Jy  sigma=1.395959
! Fit after  self-cal, rms=0.062993Jy  sigma=1.394615
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00940963 Jy
! Component: 100  -  total flux cleaned = 0.0145383 Jy
! Total flux subtracted in 100 components = 0.0145383 Jy
! Clean residual min=-0.003580 max=0.003452 Jy/beam
! Clean residual mean=-0.000002 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.115188 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 16 components and 0.115188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061310Jy  sigma=1.344254
! Fit after  self-cal, rms=0.061307Jy  sigma=1.344046
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8768 mas, bmaj=2.054 mas, bpa=-0.3405 degrees
! Estimated noise=0.266896 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00422355 Jy
! Component: 100  -  total flux cleaned = 0.00641491 Jy
! Component: 150  -  total flux cleaned = 0.00765538 Jy
! Component: 200  -  total flux cleaned = 0.00835002 Jy
! Total flux subtracted in 200 components = 0.00835002 Jy
! Clean residual min=-0.001977 max=0.002112 Jy/beam
! Clean residual mean=0.000001 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.123538 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 36 components and 0.123538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061074Jy  sigma=1.336073
! Fit after  self-cal, rms=0.061084Jy  sigma=1.336012
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8768 x 2.054 at -0.3405 degrees (North through East)
! Clean map  min=-0.0018562  max=0.10758 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.10     KP        0.95     
!   LA        1.00     MK        0.99     NL        1.00     OV        0.96     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.07     KP        0.97     
!   LA        1.03     MK        1.01     NL        1.03     OV        1.04     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        1.08     KP        1.01     
!   LA        1.02     MK        1.03     NL        1.00     OV        1.03     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.97     HN        1.06     KP        0.99     
!   LA        0.99     MK        0.98     NL        0.99     OV        0.99     
!   PT        0.97     SC        0.99     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.11     KP        0.96     
!   LA        1.00     MK        1.04     NL        1.04     OV        0.98     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.01     KP        1.03     
!   LA        0.99     MK        1.05     NL        1.08     OV        1.02     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.95     HN        1.03     KP        1.00     
!   LA        0.96     MK        1.00     NL        1.01     OV        0.97     
!   PT        1.00     SC        1.05     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061084Jy  sigma=1.336012
! Fit after  self-cal, rms=0.061988Jy  sigma=1.329230
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8835 mas, bmaj=2.064 mas, bpa=-0.2394 degrees
! Estimated noise=0.267947 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000398718 Jy
! Component: 100  -  total flux cleaned = -0.000473378 Jy
! Component: 150  -  total flux cleaned = -0.000498027 Jy
! Component: 200  -  total flux cleaned = -0.000519255 Jy
! Total flux subtracted in 200 components = -0.000519255 Jy
! Clean residual min=-0.001848 max=0.001729 Jy/beam
! Clean residual mean=0.000002 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.123018 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 40 components and 0.123018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061979Jy  sigma=1.329094
! Fit after  self-cal, rms=0.062006Jy  sigma=1.329016
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062006Jy  sigma=1.329016
! Fit after  self-cal, rms=0.063170Jy  sigma=1.325456
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8843 mas, bmaj=2.065 mas, bpa=-0.2695 degrees
! Estimated noise=0.267903 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.13973e-05 Jy
! Component: 100  -  total flux cleaned = -9.1221e-05 Jy
! Component: 150  -  total flux cleaned = -9.08277e-05 Jy
! Component: 200  -  total flux cleaned = -8.36825e-05 Jy
! Total flux subtracted in 200 components = -8.36825e-05 Jy
! Clean residual min=-0.001851 max=0.001477 Jy/beam
! Clean residual mean=0.000001 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.122935 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 42 components and 0.122935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063167Jy  sigma=1.325410
! Fit after  self-cal, rms=0.063194Jy  sigma=1.325346
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.0651e-05 Jy
! Component: 100  -  total flux cleaned = 3.35347e-05 Jy
! Component: 150  -  total flux cleaned = 3.38146e-05 Jy
! Component: 200  -  total flux cleaned = 3.94994e-05 Jy
! Total flux subtracted in 200 components = 3.94994e-05 Jy
! Clean residual min=-0.001856 max=0.001488 Jy/beam
! Clean residual mean=0.000001 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.122974 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 43 components and 0.122974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063192Jy  sigma=1.325324
! Fit after  self-cal, rms=0.063192Jy  sigma=1.325317
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063192Jy  sigma=1.325317
! Fit after  self-cal, rms=0.063302Jy  sigma=1.325308
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8851 mas, bmaj=2.066 mas, bpa=-0.3109 degrees
! Estimated noise=0.268113 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.99146e-05 Jy
! Component: 100  -  total flux cleaned = -5.4348e-05 Jy
! Component: 150  -  total flux cleaned = -6.04724e-05 Jy
! Component: 200  -  total flux cleaned = -6.59893e-05 Jy
! Total flux subtracted in 200 components = -6.59893e-05 Jy
! Clean residual min=-0.001861 max=0.001487 Jy/beam
! Clean residual mean=0.000001 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.122908 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 46 components and 0.122908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063300Jy  sigma=1.325286
! Fit after  self-cal, rms=0.063300Jy  sigma=1.325285
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.82982e-05 Jy
! Component: 100  -  total flux cleaned = 1.73907e-05 Jy
! Component: 150  -  total flux cleaned = 7.22093e-06 Jy
! Component: 200  -  total flux cleaned = 2.18574e-06 Jy
! Total flux subtracted in 200 components = 2.18574e-06 Jy
! Clean residual min=-0.001863 max=0.001491 Jy/beam
! Clean residual mean=0.000001 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.12291 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 48 components and 0.12291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063299Jy  sigma=1.325270
! Fit after  self-cal, rms=0.063299Jy  sigma=1.325270
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063299Jy  sigma=1.325270
! Fit after  self-cal, rms=0.063371Jy  sigma=1.325263
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.24 mas, bmaj=4.196 mas, bpa=5.328 degrees
! Estimated noise=0.333341 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000211151 Jy
! Component: 100  -  total flux cleaned = 0.000227825 Jy
! Component: 150  -  total flux cleaned = 0.000251893 Jy
! Component: 200  -  total flux cleaned = 0.000273832 Jy
! Total flux subtracted in 200 components = 0.000273832 Jy
! Clean residual min=-0.001426 max=0.001521 Jy/beam
! Clean residual mean=0.000001 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.123184 Jy
selfcal
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 50 components and 0.123184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063374Jy  sigma=1.325289
! Fit after  self-cal, rms=0.063377Jy  sigma=1.325274
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.94249e-05 Jy
! Component: 100  -  total flux cleaned = 6.03013e-05 Jy
! Component: 150  -  total flux cleaned = 6.07113e-05 Jy
! Component: 200  -  total flux cleaned = 7.6519e-05 Jy
! Total flux subtracted in 200 components = 7.6519e-05 Jy
! Clean residual min=-0.001422 max=0.001519 Jy/beam
! Clean residual mean=0.000001 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.123261 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 52 components and 0.123261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063380Jy  sigma=1.325318
! Fit after  self-cal, rms=0.063382Jy  sigma=1.325305
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8857 mas, bmaj=2.068 mas, bpa=-0.3517 degrees
! Estimated noise=0.26831 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8857 x 2.068 at -0.3517 degrees (North through East)
! Clean map  min=-0.0016614  max=0.10757 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.681 mas, bmaj=1.688 mas, bpa=-0.7941 degrees
! Estimated noise=0.482329 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0815898 Jy
! Component: 100  -  total flux cleaned = 0.101302 Jy
! Component: 150  -  total flux cleaned = 0.110341 Jy
! Component: 200  -  total flux cleaned = 0.115293 Jy
! Total flux subtracted in 200 components = 0.115293 Jy
! Clean residual min=-0.003236 max=0.002922 Jy/beam
! Clean residual mean=-0.000002 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.115293 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.115293 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8857 mas, bmaj=2.068 mas, bpa=-0.3517 degrees
! Estimated noise=0.26831 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00368005 Jy
! Component: 100  -  total flux cleaned = 0.00549041 Jy
! Component: 150  -  total flux cleaned = 0.00646023 Jy
! Component: 200  -  total flux cleaned = 0.00699025 Jy
! Total flux subtracted in 200 components = 0.00699025 Jy
! Clean residual min=-0.001897 max=0.001512 Jy/beam
! Clean residual mean=0.000001 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.122283 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 30 components and 0.122283 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.24 mas, bmaj=4.196 mas, bpa=5.328 degrees
! Estimated noise=0.333341 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000558219 Jy
! Component: 100  -  total flux cleaned = 0.000604298 Jy
! Component: 150  -  total flux cleaned = 0.000645969 Jy
! Component: 200  -  total flux cleaned = 0.000674709 Jy
! Total flux subtracted in 200 components = 0.000674709 Jy
! Clean residual min=-0.001385 max=0.001490 Jy/beam
! Clean residual mean=0.000002 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.122958 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.55498e-05 Jy
! Component: 100  -  total flux cleaned = 6.0426e-05 Jy
! Component: 150  -  total flux cleaned = 9.06103e-05 Jy
! Component: 200  -  total flux cleaned = 0.000111894 Jy
! Total flux subtracted in 200 components = 0.000111894 Jy
! Clean residual min=-0.001380 max=0.001498 Jy/beam
! Clean residual mean=0.000001 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.12307 Jy
! Adding 5 model components to the UV plane model.
! The established model now contains 34 components and 0.12307 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8857 mas, bmaj=2.068 mas, bpa=-0.3517 degrees
! Estimated noise=0.26831 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000249838 Jy
! Component: 100  -  total flux cleaned = -0.000221809 Jy
! Component: 150  -  total flux cleaned = -0.000231903 Jy
! Component: 200  -  total flux cleaned = -0.000222399 Jy
! Total flux subtracted in 200 components = -0.000222399 Jy
! Clean residual min=-0.001861 max=0.001460 Jy/beam
! Clean residual mean=0.000001 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.122848 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 42 components and 0.122848 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063386Jy  sigma=1.325415
! Fit after  self-cal, rms=0.063380Jy  sigma=1.325382
wmodel /scr/pima/bg219b_uvs/J1441-1523_X_map.mod
! Writing 42 model components to file: /scr/pima/bg219b_uvs/J1441-1523_X_map.mod
wobs /scr/pima/bg219b_uvs/J1441-1523_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J1441-1523_X_uvs.fits
wwins /scr/pima/bg219b_uvs/J1441-1523_X_map.win
! wwins: Wrote 1 windows to /scr/pima/bg219b_uvs/J1441-1523_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000260934 Jy
! Component: 100  -  total flux cleaned = -0.000208528 Jy
! Component: 150  -  total flux cleaned = -0.000328029 Jy
! Component: 200  -  total flux cleaned = -0.000488961 Jy
! Component: 250  -  total flux cleaned = -0.000621738 Jy
! Component: 300  -  total flux cleaned = -0.000685826 Jy
! Component: 350  -  total flux cleaned = -0.000685725 Jy
! Component: 400  -  total flux cleaned = -0.000645919 Jy
! Component: 450  -  total flux cleaned = -0.000646702 Jy
! Component: 500  -  total flux cleaned = -0.00062764 Jy
! Component: 550  -  total flux cleaned = -0.000589783 Jy
! Component: 600  -  total flux cleaned = -0.000497631 Jy
! Component: 650  -  total flux cleaned = -0.000425445 Jy
! Component: 700  -  total flux cleaned = -0.00035447 Jy
! Component: 750  -  total flux cleaned = -0.000284886 Jy
! Component: 800  -  total flux cleaned = -0.000131263 Jy
! Component: 850  -  total flux cleaned = -4.73996e-05 Jy
! Component: 900  -  total flux cleaned = 3.52155e-05 Jy
! Component: 950  -  total flux cleaned = 2.72168e-06 Jy
! Component: 1000  -  total flux cleaned = 8.28748e-05 Jy
! Component: 1050  -  total flux cleaned = 0.000114682 Jy
! Component: 1100  -  total flux cleaned = 0.000114708 Jy
! Component: 1150  -  total flux cleaned = 8.43236e-05 Jy
! Component: 1200  -  total flux cleaned = 8.40955e-05 Jy
! Component: 1250  -  total flux cleaned = 5.42255e-05 Jy
! Component: 1300  -  total flux cleaned = 5.40733e-05 Jy
! Component: 1350  -  total flux cleaned = 3.94617e-05 Jy
! Component: 1400  -  total flux cleaned = 2.51593e-05 Jy
! Component: 1450  -  total flux cleaned = 5.35955e-05 Jy
! Component: 1500  -  total flux cleaned = 3.9589e-05 Jy
! Component: 1550  -  total flux cleaned = 6.69966e-05 Jy
! Component: 1600  -  total flux cleaned = 6.67771e-05 Jy
! Component: 1650  -  total flux cleaned = 5.31617e-05 Jy
! Component: 1700  -  total flux cleaned = 6.64872e-05 Jy
! Component: 1750  -  total flux cleaned = 5.32521e-05 Jy
! Component: 1800  -  total flux cleaned = 5.31178e-05 Jy
! Component: 1850  -  total flux cleaned = 0.000105044 Jy
! Component: 1900  -  total flux cleaned = 7.92809e-05 Jy
! Component: 1950  -  total flux cleaned = 0.000117466 Jy
! Component: 2000  -  total flux cleaned = 0.000155317 Jy
! Component: 2050  -  total flux cleaned = 0.000142686 Jy
! Component: 2100  -  total flux cleaned = 0.000179832 Jy
! Component: 2150  -  total flux cleaned = 0.000204258 Jy
! Component: 2200  -  total flux cleaned = 0.000204136 Jy
! Component: 2250  -  total flux cleaned = 0.000204061 Jy
! Component: 2300  -  total flux cleaned = 0.000228138 Jy
! Component: 2350  -  total flux cleaned = 0.00024007 Jy
! Component: 2400  -  total flux cleaned = 0.000228271 Jy
! Component: 2450  -  total flux cleaned = 0.000251491 Jy
! Component: 2500  -  total flux cleaned = 0.000239993 Jy
! Component: 2550  -  total flux cleaned = 0.000297211 Jy
! Component: 2600  -  total flux cleaned = 0.000308381 Jy
! Component: 2650  -  total flux cleaned = 0.000330955 Jy
! Component: 2700  -  total flux cleaned = 0.000330861 Jy
! Component: 2750  -  total flux cleaned = 0.000319711 Jy
! Component: 2800  -  total flux cleaned = 0.000363864 Jy
! Component: 2850  -  total flux cleaned = 0.000385818 Jy
! Component: 2900  -  total flux cleaned = 0.000418453 Jy
! Component: 2950  -  total flux cleaned = 0.000472411 Jy
! Component: 3000  -  total flux cleaned = 0.00045095 Jy
! Component: 3050  -  total flux cleaned = 0.000514616 Jy
! Component: 3100  -  total flux cleaned = 0.000546367 Jy
! Component: 3150  -  total flux cleaned = 0.000556808 Jy
! Component: 3200  -  total flux cleaned = 0.000567205 Jy
! Component: 3250  -  total flux cleaned = 0.00059811 Jy
! Component: 3300  -  total flux cleaned = 0.000649456 Jy
! Component: 3350  -  total flux cleaned = 0.000629186 Jy
! Component: 3400  -  total flux cleaned = 0.000619168 Jy
! Component: 3450  -  total flux cleaned = 0.000649401 Jy
! Component: 3500  -  total flux cleaned = 0.000669403 Jy
! Component: 3550  -  total flux cleaned = 0.00065951 Jy
! Component: 3600  -  total flux cleaned = 0.000699001 Jy
! Component: 3650  -  total flux cleaned = 0.000689196 Jy
! Component: 3700  -  total flux cleaned = 0.000689206 Jy
! Component: 3750  -  total flux cleaned = 0.000708609 Jy
! Component: 3800  -  total flux cleaned = 0.00073753 Jy
! Component: 3850  -  total flux cleaned = 0.000718343 Jy
! Component: 3900  -  total flux cleaned = 0.000708757 Jy
! Component: 3950  -  total flux cleaned = 0.000699269 Jy
! Component: 4000  -  total flux cleaned = 0.000699202 Jy
! Component: 4050  -  total flux cleaned = 0.000689835 Jy
! Total flux subtracted in 4096 components = 0.000689715 Jy
! Clean residual min=-0.000508 max=0.000534 Jy/beam
! Clean residual mean=0.000000 rms=0.000161 Jy/beam
! Combined flux in latest and established models = 0.123537 Jy
keep
! Adding 287 model components to the UV plane model.
! The established model now contains 329 components and 0.123537 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J1441-1523_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8857 x 2.068 at -0.3517 degrees (North through East)
! Clean map  min=-0.0013858  max=0.108 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1441-1523_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.107996 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000159981 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.444409 0.444409 0.888818 1.77764 3.55527 7.11054 14.2211 28.4422 56.8843
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.107 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  675.054 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1441-1523_X_uvs.log closed on Thu Apr  7 01:56:53 2016