! Started logfile: /scr/pima/bg219b_uvs/J1433-1548_X_dfm.log on Thu May 19 20:22:39 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1433-1548_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1433-1548_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.916667 visibilities/baseline/integration-bin.
! Found source: J1433-1548
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13860 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1433-1548_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.153604Jy  sigma=22.405055
! Fit after  self-cal, rms=0.493597Jy  sigma=9.808152
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6253 mas, bmaj=1.584 mas, bpa=-3.171 degrees
! Estimated noise=0.54753 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.353233 Jy
! Component: 100  -  total flux cleaned = 0.498256 Jy
! Total flux subtracted in 100 components = 0.498256 Jy
! Clean residual min=-0.023116 max=0.072295 Jy/beam
! Clean residual mean=-0.000077 rms=0.006824 Jy/beam
! Combined flux in latest and established models = 0.498256 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.498256 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.206790Jy  sigma=3.945721
! Fit after  self-cal, rms=0.206700Jy  sigma=3.944453
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.08404 Jy
! Component: 100  -  total flux cleaned = 0.13345 Jy
! Total flux subtracted in 100 components = 0.13345 Jy
! Clean residual min=-0.013251 max=0.041880 Jy/beam
! Clean residual mean=-0.000045 rms=0.003896 Jy/beam
! Combined flux in latest and established models = 0.631706 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.631706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.131581Jy  sigma=2.460543
! Fit after  self-cal, rms=0.131462Jy  sigma=2.458690
! Inverting map 
! Added new window around map position (-0.8, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0409946 Jy
! Component: 100  -  total flux cleaned = 0.0672524 Jy
! Total flux subtracted in 100 components = 0.0672524 Jy
! Clean residual min=-0.010133 max=0.019161 Jy/beam
! Clean residual mean=-0.000030 rms=0.002672 Jy/beam
! Combined flux in latest and established models = 0.698959 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 31 components and 0.698959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104043Jy  sigma=1.895440
! Fit after  self-cal, rms=0.103524Jy  sigma=1.883832
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0209615 Jy
! Component: 100  -  total flux cleaned = 0.0364924 Jy
! Total flux subtracted in 100 components = 0.0364924 Jy
! Clean residual min=-0.008765 max=0.012005 Jy/beam
! Clean residual mean=-0.000023 rms=0.002130 Jy/beam
! Combined flux in latest and established models = 0.735451 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 44 components and 0.735451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093550Jy  sigma=1.674593
! Fit after  self-cal, rms=0.093360Jy  sigma=1.670059
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8088 mas, bmaj=1.946 mas, bpa=-1.759 degrees
! Estimated noise=0.344297 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0248817 Jy
! Component: 100  -  total flux cleaned = 0.0398285 Jy
! Component: 150  -  total flux cleaned = 0.0491532 Jy
! Component: 200  -  total flux cleaned = 0.055093 Jy
! Total flux subtracted in 200 components = 0.055093 Jy
! Clean residual min=-0.008070 max=0.011914 Jy/beam
! Clean residual mean=-0.000011 rms=0.002028 Jy/beam
! Combined flux in latest and established models = 0.790544 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 64 components and 0.790544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086225Jy  sigma=1.514915
! Fit after  self-cal, rms=0.085943Jy  sigma=1.507641
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8088 x 1.946 at -1.759 degrees (North through East)
! Clean map  min=-0.0074379  max=0.52725 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.14     KP        0.98     
!   LA        0.98     MK        1.01     NL        1.01     OV        0.97     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.13     KP        1.00     
!   LA        1.01     MK        1.03     NL        1.02     OV        1.01     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        1.13     KP        1.02     
!   LA        1.01     MK        1.03     NL        1.03     OV        1.01     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.10     KP        0.99     
!   LA        0.97     MK        1.00     NL        1.00     OV        0.98     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.11     KP        0.99     
!   LA        0.97     MK        0.99     NL        0.99     OV        0.98     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.10     KP        1.00     
!   LA        0.99     MK        1.04     NL        1.03     OV        0.99     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.13     KP        1.03     
!   LA        1.02     MK        1.05     NL        1.04     OV        1.01     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.12     KP        1.00     
!   LA        0.97     MK        1.03     NL        1.01     OV        0.97     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.11     KP        0.99     
!   LA        0.97     MK        1.04     NL        1.02     OV        1.00     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        1.12     KP        0.97     
!   LA        0.96     MK        1.01     NL        0.99     OV        0.97     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.11     KP        0.96     
!   LA        0.95     MK        1.00     NL        0.99     OV        0.97     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.93     HN        1.01     KP        0.97     
!   LA        0.96     MK        0.98     NL        0.98     OV        0.93     
!   PT        0.92     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.085943Jy  sigma=1.507641
! Fit after  self-cal, rms=0.077860Jy  sigma=1.354460
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8148 mas, bmaj=1.947 mas, bpa=-1.301 degrees
! Estimated noise=0.344902 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00369399 Jy
! Component: 100  -  total flux cleaned = -0.00454202 Jy
! Component: 150  -  total flux cleaned = -0.00486969 Jy
! Component: 200  -  total flux cleaned = -0.00520317 Jy
! Total flux subtracted in 200 components = -0.00520317 Jy
! Clean residual min=-0.005273 max=0.006375 Jy/beam
! Clean residual mean=-0.000004 rms=0.001294 Jy/beam
! Combined flux in latest and established models = 0.785341 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 72 components and 0.785341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077563Jy  sigma=1.349442
! Fit after  self-cal, rms=0.077575Jy  sigma=1.349017
! Inverting map 
! Added new window around map position (9.8, -16).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00347693 Jy
! Component: 100  -  total flux cleaned = 0.00310315 Jy
! Component: 150  -  total flux cleaned = 0.00263976 Jy
! Component: 200  -  total flux cleaned = 0.00238297 Jy
! Total flux subtracted in 200 components = 0.00238297 Jy
! Clean residual min=-0.004626 max=0.005193 Jy/beam
! Clean residual mean=-0.000003 rms=0.001190 Jy/beam
! Combined flux in latest and established models = 0.787724 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 92 components and 0.787724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076612Jy  sigma=1.334581
! Fit after  self-cal, rms=0.076564Jy  sigma=1.333676
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076564Jy  sigma=1.333676
! Fit after  self-cal, rms=0.073560Jy  sigma=1.281892
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.815 mas, bmaj=1.947 mas, bpa=-1.317 degrees
! Estimated noise=0.345263 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000470167 Jy
! Component: 100  -  total flux cleaned = -0.00075276 Jy
! Component: 150  -  total flux cleaned = -0.000948491 Jy
! Component: 200  -  total flux cleaned = -0.00103218 Jy
! Total flux subtracted in 200 components = -0.00103218 Jy
! Clean residual min=-0.002699 max=0.002762 Jy/beam
! Clean residual mean=-0.000003 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.786691 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 101 components and 0.786691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073482Jy  sigma=1.280420
! Fit after  self-cal, rms=0.073500Jy  sigma=1.280257
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13.2, 29).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00235854 Jy
! Component: 100  -  total flux cleaned = 0.00278858 Jy
! Component: 150  -  total flux cleaned = 0.002741 Jy
! Component: 200  -  total flux cleaned = 0.00273952 Jy
! Total flux subtracted in 200 components = 0.00273952 Jy
! Clean residual min=-0.002656 max=0.002315 Jy/beam
! Clean residual mean=-0.000002 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.789431 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 113 components and 0.789431 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073414Jy  sigma=1.278243
! Fit after  self-cal, rms=0.073411Jy  sigma=1.278177
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073411Jy  sigma=1.278177
! Fit after  self-cal, rms=0.073514Jy  sigma=1.277975
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8152 mas, bmaj=1.948 mas, bpa=-1.307 degrees
! Estimated noise=0.345516 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000122059 Jy
! Component: 100  -  total flux cleaned = -3.49343e-06 Jy
! Component: 150  -  total flux cleaned = -7.73618e-05 Jy
! Component: 200  -  total flux cleaned = -7.57426e-05 Jy
! Total flux subtracted in 200 components = -7.57426e-05 Jy
! Clean residual min=-0.002552 max=0.002192 Jy/beam
! Clean residual mean=-0.000001 rms=0.000538 Jy/beam
! Combined flux in latest and established models = 0.789355 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 121 components and 0.789355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073475Jy  sigma=1.277199
! Fit after  self-cal, rms=0.073474Jy  sigma=1.277171
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000102329 Jy
! Component: 100  -  total flux cleaned = -0.000136089 Jy
! Component: 150  -  total flux cleaned = -0.000168125 Jy
! Component: 200  -  total flux cleaned = -0.000229219 Jy
! Total flux subtracted in 200 components = -0.000229219 Jy
! Clean residual min=-0.002481 max=0.002113 Jy/beam
! Clean residual mean=-0.000001 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.789126 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 125 components and 0.789126 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073447Jy  sigma=1.276661
! Fit after  self-cal, rms=0.073446Jy  sigma=1.276642
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073446Jy  sigma=1.276642
! Fit after  self-cal, rms=0.073494Jy  sigma=1.276599
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.147 mas, bmaj=4.196 mas, bpa=4.735 degrees
! Estimated noise=0.46805 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000685697 Jy
! Component: 100  -  total flux cleaned = 0.000823389 Jy
! Component: 150  -  total flux cleaned = 0.000893473 Jy
! Component: 200  -  total flux cleaned = 0.000914239 Jy
! Total flux subtracted in 200 components = 0.000914239 Jy
! Clean residual min=-0.002942 max=0.003126 Jy/beam
! Clean residual mean=-0.000001 rms=0.000800 Jy/beam
! Combined flux in latest and established models = 0.79004 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 139 components and 0.79004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073501Jy  sigma=1.276667
! Fit after  self-cal, rms=0.073501Jy  sigma=1.276652
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000147403 Jy
! Component: 100  -  total flux cleaned = 0.000164618 Jy
! Component: 150  -  total flux cleaned = 0.000180951 Jy
! Component: 200  -  total flux cleaned = 0.00018079 Jy
! Total flux subtracted in 200 components = 0.00018079 Jy
! Clean residual min=-0.002944 max=0.003063 Jy/beam
! Clean residual mean=-0.000001 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 0.790221 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 148 components and 0.790221 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073502Jy  sigma=1.276692
! Fit after  self-cal, rms=0.073503Jy  sigma=1.276688
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8152 mas, bmaj=1.949 mas, bpa=-1.305 degrees
! Estimated noise=0.345568 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8152 x 1.949 at -1.305 degrees (North through East)
! Clean map  min=-0.0035922  max=0.52892 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073503Jy  sigma=1.276688
! Fit after  self-cal, rms=0.069883Jy  sigma=1.204720
! Inverting map and beam 
! Estimated beam: bmin=0.8134 mas, bmaj=1.944 mas, bpa=-1.383 degrees
! Estimated noise=0.343005 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00272808 Jy
! Component: 100  -  total flux cleaned = -0.00377889 Jy
! Component: 150  -  total flux cleaned = -0.0039248 Jy
! Component: 200  -  total flux cleaned = -0.00400947 Jy
! Total flux subtracted in 200 components = -0.00400947 Jy
! Clean residual min=-0.002351 max=0.002215 Jy/beam
! Clean residual mean=-0.000003 rms=0.000572 Jy/beam
! Combined flux in latest and established models = 0.786211 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 157 components and 0.786211 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069759Jy  sigma=1.202078
! Fit after  self-cal, rms=0.069755Jy  sigma=1.202030
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000189015 Jy
! Component: 100  -  total flux cleaned = -0.000262234 Jy
! Component: 150  -  total flux cleaned = -0.000363505 Jy
! Component: 200  -  total flux cleaned = -0.000458696 Jy
! Total flux subtracted in 200 components = -0.000458696 Jy
! Clean residual min=-0.002345 max=0.002146 Jy/beam
! Clean residual mean=-0.000003 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.785753 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 165 components and 0.785753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069723Jy  sigma=1.201371
! Fit after  self-cal, rms=0.069721Jy  sigma=1.201358
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069721Jy  sigma=1.201358
! Fit after  self-cal, rms=0.069379Jy  sigma=1.199852
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6263 mas, bmaj=1.576 mas, bpa=-2.775 degrees
! Estimated noise=0.54224 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.349747 Jy
! Component: 100  -  total flux cleaned = 0.493268 Jy
! Component: 150  -  total flux cleaned = 0.577314 Jy
! Component: 200  -  total flux cleaned = 0.631025 Jy
! Total flux subtracted in 200 components = 0.631025 Jy
! Clean residual min=-0.010421 max=0.029675 Jy/beam
! Clean residual mean=-0.000038 rms=0.003266 Jy/beam
! Combined flux in latest and established models = 0.631025 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.631025 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8125 mas, bmaj=1.942 mas, bpa=-1.421 degrees
! Estimated noise=0.34114 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0647278 Jy
! Component: 100  -  total flux cleaned = 0.0985278 Jy
! Component: 150  -  total flux cleaned = 0.117291 Jy
! Component: 200  -  total flux cleaned = 0.128363 Jy
! Total flux subtracted in 200 components = 0.128363 Jy
! Clean residual min=-0.003839 max=0.006271 Jy/beam
! Clean residual mean=-0.000009 rms=0.001002 Jy/beam
! Combined flux in latest and established models = 0.759388 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 60 components and 0.759388 Jy
! Inverting map 
! Added new window around map position (0.6, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00709271 Jy
! Component: 100  -  total flux cleaned = 0.0119504 Jy
! Component: 150  -  total flux cleaned = 0.0155543 Jy
! Component: 200  -  total flux cleaned = 0.017441 Jy
! Total flux subtracted in 200 components = 0.017441 Jy
! Clean residual min=-0.002891 max=0.003330 Jy/beam
! Clean residual mean=-0.000005 rms=0.000662 Jy/beam
! Combined flux in latest and established models = 0.776829 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 89 components and 0.776829 Jy
! Inverting map 
! Added new window around map position (-1.6, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00325895 Jy
! Component: 100  -  total flux cleaned = 0.00466637 Jy
! Component: 150  -  total flux cleaned = 0.00540944 Jy
! Component: 200  -  total flux cleaned = 0.00580677 Jy
! Total flux subtracted in 200 components = 0.00580677 Jy
! Clean residual min=-0.002425 max=0.002274 Jy/beam
! Clean residual mean=-0.000004 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.782635 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 115 components and 0.782636 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.147 mas, bmaj=4.19 mas, bpa=4.715 degrees
! Estimated noise=0.463918 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000696673 Jy
! Component: 100  -  total flux cleaned = 0.00110943 Jy
! Component: 150  -  total flux cleaned = 0.00141233 Jy
! Component: 200  -  total flux cleaned = 0.00176285 Jy
! Total flux subtracted in 200 components = 0.00176285 Jy
! Clean residual min=-0.003415 max=0.002985 Jy/beam
! Clean residual mean=-0.000008 rms=0.000873 Jy/beam
! Combined flux in latest and established models = 0.784398 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000230113 Jy
! Component: 100  -  total flux cleaned = 0.000404186 Jy
! Component: 150  -  total flux cleaned = 0.000499231 Jy
! Component: 200  -  total flux cleaned = 0.000588998 Jy
! Total flux subtracted in 200 components = 0.000588998 Jy
! Clean residual min=-0.003315 max=0.003017 Jy/beam
! Clean residual mean=-0.000008 rms=0.000852 Jy/beam
! Combined flux in latest and established models = 0.784987 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 148 components and 0.784987 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8125 mas, bmaj=1.942 mas, bpa=-1.421 degrees
! Estimated noise=0.34114 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000400087 Jy
! Component: 100  -  total flux cleaned = -0.000551994 Jy
! Component: 150  -  total flux cleaned = -0.000642013 Jy
! Component: 200  -  total flux cleaned = -0.000641779 Jy
! Total flux subtracted in 200 components = -0.000641779 Jy
! Clean residual min=-0.002229 max=0.002038 Jy/beam
! Clean residual mean=-0.000003 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.784346 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 165 components and 0.784346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069228Jy  sigma=1.196715
! Fit after  self-cal, rms=0.069211Jy  sigma=1.196332
wmodel /J1433-1548_X_map.mod
! wmodel: Unable to open new model file: /J1433-1548_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1433-1548_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8125 x 1.942 at -1.421 degrees (North through East)
! Clean map  min=-0.0020789  max=0.52653 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1433-1548_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.526531 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000529767 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.301844 0.301844 0.603688 1.20738 2.41475 4.8295 9.65901 19.318 38.636 77.272
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.526 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  993.891 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1433-1548_X_dfm.log closed on Thu May 19 20:22:42 2016