! Started logfile: /scr/pima/bg219b_uvs/J1424-1407_X_dfm.log on Thu May 19 20:22:23 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1424-1407_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1424-1407_X_uva.fits
! AN table 1: 56 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.877778 visibilities/baseline/integration-bin.
! Found source: J1424-1407
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 26544 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1424-1407_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.016750Jy  sigma=23.229295
! Fit after  self-cal, rms=0.847072Jy  sigma=19.296703
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6407 mas, bmaj=1.656 mas, bpa=-1.979 degrees
! Estimated noise=0.416927 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.112499 Jy
! Component: 100  -  total flux cleaned = 0.144471 Jy
! Total flux subtracted in 100 components = 0.144471 Jy
! Clean residual min=-0.004697 max=0.013827 Jy/beam
! Clean residual mean=-0.000003 rms=0.001327 Jy/beam
! Combined flux in latest and established models = 0.144471 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.144471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071312Jy  sigma=1.511389
! Fit after  self-cal, rms=0.071175Jy  sigma=1.508266
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0154951 Jy
! Component: 100  -  total flux cleaned = 0.0239717 Jy
! Total flux subtracted in 100 components = 0.0239717 Jy
! Clean residual min=-0.002861 max=0.004771 Jy/beam
! Clean residual mean=-0.000001 rms=0.000755 Jy/beam
! Combined flux in latest and established models = 0.168443 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.168443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066781Jy  sigma=1.387865
! Fit after  self-cal, rms=0.066779Jy  sigma=1.387611
! Inverting map 
! Added new window around map position (-0.6, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00527326 Jy
! Component: 100  -  total flux cleaned = 0.00832581 Jy
! Total flux subtracted in 100 components = 0.00832581 Jy
! Clean residual min=-0.002914 max=0.002964 Jy/beam
! Clean residual mean=-0.000000 rms=0.000665 Jy/beam
! Combined flux in latest and established models = 0.176769 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 18 components and 0.176769 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066264Jy  sigma=1.372815
! Fit after  self-cal, rms=0.066264Jy  sigma=1.372720
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8507 mas, bmaj=1.999 mas, bpa=-1.079 degrees
! Estimated noise=0.194849 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.8, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00324239 Jy
! Component: 100  -  total flux cleaned = 0.00511176 Jy
! Component: 150  -  total flux cleaned = 0.00607319 Jy
! Component: 200  -  total flux cleaned = 0.00649309 Jy
! Total flux subtracted in 200 components = 0.00649309 Jy
! Clean residual min=-0.001843 max=0.002049 Jy/beam
! Clean residual mean=-0.000001 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.183262 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 49 components and 0.183262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066090Jy  sigma=1.368715
! Fit after  self-cal, rms=0.066084Jy  sigma=1.368381
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8507 x 1.999 at -1.079 degrees (North through East)
! Clean map  min=-0.0016641  max=0.15464 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.05     KP        0.98     
!   LA        1.00     MK        1.00     NL        1.03     OV        0.99     
!   PT        0.99     SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     HN        1.07     KP        1.00     
!   LA        1.01     MK        1.00     NL        1.02     OV        1.04     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.04     HN        1.08     KP        1.04     
!   LA        1.01     MK        1.00     NL        1.06     OV        1.02     
!   PT        1.02     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.07     KP        0.98     
!   LA        0.98     MK        1.01     NL        0.99     OV        1.00     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.07     KP        0.99     
!   LA        0.96     MK        0.98     NL        1.00     OV        1.00     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.07     KP        0.99     
!   LA        0.99     MK        1.02     NL        1.03     OV        1.00     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.05     KP        1.04     
!   LA        1.02     MK        1.02     NL        1.03     OV        1.02     
!   PT        1.02     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.00     KP        1.00     
!   LA        0.97     MK        1.00     NL        0.99     OV        0.98     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.07     KP        0.99     
!   LA        0.98     MK        0.99     NL        1.02     OV        1.00     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        0.99     KP        1.00     
!   LA        0.96     MK        1.00     NL        0.97     OV        0.98     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        1.00     KP        0.96     
!   LA        0.95     MK        1.01     NL        0.99     OV        0.96     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.96     HN        0.97     KP        0.95     
!   LA        0.94     MK        0.96     NL        0.95     OV        0.94     
!   PT        0.91     SC        0.93     
! 
! 
! Fit before self-cal, rms=0.066084Jy  sigma=1.368381
! Fit after  self-cal, rms=0.065285Jy  sigma=1.353869
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8523 mas, bmaj=1.999 mas, bpa=-0.9005 degrees
! Estimated noise=0.194045 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000703952 Jy
! Component: 100  -  total flux cleaned = -0.000857298 Jy
! Component: 150  -  total flux cleaned = -0.000990225 Jy
! Component: 200  -  total flux cleaned = -0.00110784 Jy
! Total flux subtracted in 200 components = -0.00110784 Jy
! Clean residual min=-0.001562 max=0.001551 Jy/beam
! Clean residual mean=-0.000002 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.182154 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 69 components and 0.182154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065252Jy  sigma=1.353407
! Fit after  self-cal, rms=0.065266Jy  sigma=1.353338
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065266Jy  sigma=1.353338
! Fit after  self-cal, rms=0.066165Jy  sigma=1.349449
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8518 mas, bmaj=2 mas, bpa=-1.049 degrees
! Estimated noise=0.193989 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000288497 Jy
! Component: 100  -  total flux cleaned = -0.000343492 Jy
! Component: 150  -  total flux cleaned = -0.000376433 Jy
! Component: 200  -  total flux cleaned = -0.000391559 Jy
! Total flux subtracted in 200 components = -0.000391559 Jy
! Clean residual min=-0.001149 max=0.001517 Jy/beam
! Clean residual mean=-0.000002 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.181762 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 83 components and 0.181763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066154Jy  sigma=1.349232
! Fit after  self-cal, rms=0.066170Jy  sigma=1.349200
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-33.8, 19.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00149804 Jy
! Component: 100  -  total flux cleaned = 0.00227921 Jy
! Component: 150  -  total flux cleaned = 0.00243931 Jy
! Component: 200  -  total flux cleaned = 0.00245671 Jy
! Total flux subtracted in 200 components = 0.00245671 Jy
! Clean residual min=-0.001031 max=0.000968 Jy/beam
! Clean residual mean=-0.000002 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.184219 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 110 components and 0.184219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066136Jy  sigma=1.348293
! Fit after  self-cal, rms=0.066131Jy  sigma=1.348224
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066131Jy  sigma=1.348224
! Fit after  self-cal, rms=0.066159Jy  sigma=1.348167
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8516 mas, bmaj=1.999 mas, bpa=-1.054 degrees
! Estimated noise=0.19386 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000308933 Jy
! Component: 100  -  total flux cleaned = 0.000400219 Jy
! Component: 150  -  total flux cleaned = 0.000465395 Jy
! Component: 200  -  total flux cleaned = 0.000494718 Jy
! Total flux subtracted in 200 components = 0.000494718 Jy
! Clean residual min=-0.000996 max=0.000983 Jy/beam
! Clean residual mean=-0.000002 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.184714 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 128 components and 0.184714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066149Jy  sigma=1.347956
! Fit after  self-cal, rms=0.066149Jy  sigma=1.347947
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.77034e-05 Jy
! Component: 100  -  total flux cleaned = 0.000105742 Jy
! Component: 150  -  total flux cleaned = 0.000132504 Jy
! Component: 200  -  total flux cleaned = 0.000158123 Jy
! Total flux subtracted in 200 components = 0.000158123 Jy
! Clean residual min=-0.000992 max=0.000979 Jy/beam
! Clean residual mean=-0.000002 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.184872 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 135 components and 0.184872 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066143Jy  sigma=1.347839
! Fit after  self-cal, rms=0.066143Jy  sigma=1.347835
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066143Jy  sigma=1.347835
! Fit after  self-cal, rms=0.066156Jy  sigma=1.347814
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.214 mas, bmaj=4.239 mas, bpa=5.602 degrees
! Estimated noise=0.247058 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000333926 Jy
! Component: 100  -  total flux cleaned = 0.00046157 Jy
! Component: 150  -  total flux cleaned = 0.000566188 Jy
! Component: 200  -  total flux cleaned = 0.00064647 Jy
! Total flux subtracted in 200 components = 0.00064647 Jy
! Clean residual min=-0.001197 max=0.001077 Jy/beam
! Clean residual mean=-0.000005 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.185518 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 146 components and 0.185518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066154Jy  sigma=1.347779
! Fit after  self-cal, rms=0.066154Jy  sigma=1.347766
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.22354e-05 Jy
! Component: 100  -  total flux cleaned = 8.83751e-05 Jy
! Component: 150  -  total flux cleaned = 0.000129294 Jy
! Component: 200  -  total flux cleaned = 0.000144505 Jy
! Total flux subtracted in 200 components = 0.000144505 Jy
! Clean residual min=-0.001203 max=0.001083 Jy/beam
! Clean residual mean=-0.000005 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.185663 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 149 components and 0.185663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066154Jy  sigma=1.347769
! Fit after  self-cal, rms=0.066154Jy  sigma=1.347768
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8513 mas, bmaj=1.999 mas, bpa=-1.062 degrees
! Estimated noise=0.193781 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8513 x 1.999 at -1.062 degrees (North through East)
! Clean map  min=-0.0010585  max=0.15416 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6411 mas, bmaj=1.655 mas, bpa=-1.916 degrees
! Estimated noise=0.413696 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.111563 Jy
! Component: 100  -  total flux cleaned = 0.143563 Jy
! Component: 150  -  total flux cleaned = 0.158877 Jy
! Component: 200  -  total flux cleaned = 0.167383 Jy
! Total flux subtracted in 200 components = 0.167383 Jy
! Clean residual min=-0.002856 max=0.004293 Jy/beam
! Clean residual mean=-0.000001 rms=0.000683 Jy/beam
! Combined flux in latest and established models = 0.167383 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.167383 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8513 mas, bmaj=1.999 mas, bpa=-1.062 degrees
! Estimated noise=0.193781 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00697957 Jy
! Component: 100  -  total flux cleaned = 0.0101482 Jy
! Component: 150  -  total flux cleaned = 0.0122315 Jy
! Component: 200  -  total flux cleaned = 0.0137895 Jy
! Total flux subtracted in 200 components = 0.0137895 Jy
! Clean residual min=-0.001210 max=0.001201 Jy/beam
! Clean residual mean=-0.000002 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.181172 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 41 components and 0.181172 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.214 mas, bmaj=4.239 mas, bpa=5.602 degrees
! Estimated noise=0.247058 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183283 Jy
! Component: 100  -  total flux cleaned = 0.00292811 Jy
! Component: 150  -  total flux cleaned = 0.00360906 Jy
! Component: 200  -  total flux cleaned = 0.00389029 Jy
! Total flux subtracted in 200 components = 0.00389029 Jy
! Clean residual min=-0.001242 max=0.000992 Jy/beam
! Clean residual mean=-0.000004 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.185062 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000220226 Jy
! Component: 100  -  total flux cleaned = 0.000373487 Jy
! Component: 150  -  total flux cleaned = 0.000433568 Jy
! Component: 200  -  total flux cleaned = 0.000487706 Jy
! Total flux subtracted in 200 components = 0.000487706 Jy
! Clean residual min=-0.001219 max=0.001042 Jy/beam
! Clean residual mean=-0.000005 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.18555 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 80 components and 0.18555 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8513 mas, bmaj=1.999 mas, bpa=-1.062 degrees
! Estimated noise=0.193781 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.05324e-05 Jy
! Component: 100  -  total flux cleaned = -7.50789e-05 Jy
! Component: 150  -  total flux cleaned = -0.000116098 Jy
! Component: 200  -  total flux cleaned = -0.000115507 Jy
! Total flux subtracted in 200 components = -0.000115507 Jy
! Clean residual min=-0.001025 max=0.001120 Jy/beam
! Clean residual mean=-0.000002 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.185435 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 96 components and 0.185435 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066173Jy  sigma=1.348148
! Fit after  self-cal, rms=0.066170Jy  sigma=1.348097
wmodel /J1424-1407_X_map.mod
! wmodel: Unable to open new model file: /J1424-1407_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1424-1407_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8513 x 1.999 at -1.062 degrees (North through East)
! Clean map  min=-0.00094937  max=0.15407 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1424-1407_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.154068 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000245186 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.477425 0.477425 0.95485 1.9097 3.8194 7.6388 15.2776 30.5552 61.1104
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.154 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  628.371 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1424-1407_X_dfm.log closed on Thu May 19 20:22:26 2016