! Started logfile: /scr/pima/bg219b_uvs/J1423-2218_X_dfm.log on Thu May 19 20:22:15 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1423-2218_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1423-2218_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.909829 visibilities/baseline/integration-bin.
! Found source: J1423-2218
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25548 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1423-2218_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.016704Jy  sigma=21.906151
! Fit after  self-cal, rms=0.788663Jy  sigma=16.907804
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6107 mas, bmaj=1.634 mas, bpa=-5.136 degrees
! Estimated noise=0.401029 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.153646 Jy
! Component: 100  -  total flux cleaned = 0.195266 Jy
! Total flux subtracted in 100 components = 0.195266 Jy
! Clean residual min=-0.008914 max=0.017794 Jy/beam
! Clean residual mean=-0.000007 rms=0.001865 Jy/beam
! Combined flux in latest and established models = 0.195266 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.195266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085267Jy  sigma=1.740595
! Fit after  self-cal, rms=0.085251Jy  sigma=1.740210
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0191239 Jy
! Component: 100  -  total flux cleaned = 0.0293876 Jy
! Total flux subtracted in 100 components = 0.0293876 Jy
! Clean residual min=-0.006301 max=0.011963 Jy/beam
! Clean residual mean=-0.000004 rms=0.001366 Jy/beam
! Combined flux in latest and established models = 0.224654 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.224654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077784Jy  sigma=1.549903
! Fit after  self-cal, rms=0.077778Jy  sigma=1.549591
! Inverting map 
! Added new window around map position (-1.8, -1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119257 Jy
! Component: 100  -  total flux cleaned = 0.0190426 Jy
! Total flux subtracted in 100 components = 0.0190426 Jy
! Clean residual min=-0.006024 max=0.007231 Jy/beam
! Clean residual mean=-0.000003 rms=0.001096 Jy/beam
! Combined flux in latest and established models = 0.243697 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 30 components and 0.243697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074516Jy  sigma=1.469656
! Fit after  self-cal, rms=0.074264Jy  sigma=1.463810
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8228 mas, bmaj=2.074 mas, bpa=-5.522 degrees
! Estimated noise=0.22007 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.2, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120308 Jy
! Component: 100  -  total flux cleaned = 0.0194778 Jy
! Component: 150  -  total flux cleaned = 0.0243989 Jy
! Component: 200  -  total flux cleaned = 0.0277174 Jy
! Total flux subtracted in 200 components = 0.0277174 Jy
! Clean residual min=-0.003060 max=0.005843 Jy/beam
! Clean residual mean=-0.000008 rms=0.000893 Jy/beam
! Combined flux in latest and established models = 0.271414 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 75 components and 0.271414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072176Jy  sigma=1.411846
! Fit after  self-cal, rms=0.072032Jy  sigma=1.407718
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8228 x 2.074 at -5.522 degrees (North through East)
! Clean map  min=-0.0026763  max=0.20927 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.13     KP        0.97     
!   LA        0.99     MK        0.96     NL        1.01     OV        1.00     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     HN        1.10     KP        0.98     
!   LA        1.00     MK        1.03     NL        1.07     OV        1.04     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        1.12     KP        1.03     
!   LA        1.01     MK        1.02     NL        1.07     OV        1.03     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.07     KP        0.99     
!   LA        0.97     MK        0.99     NL        1.05     OV        1.00     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.08     KP        0.98     
!   LA        0.98     MK        0.99     NL        1.02     OV        0.98     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.10     KP        1.01     
!   LA        0.97     MK        1.02     NL        1.05     OV        1.01     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.10     KP        1.01     
!   LA        1.02     MK        1.05     NL        1.03     OV        1.03     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.06     KP        1.00     
!   LA        0.97     MK        1.00     NL        1.01     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.08     KP        0.99     
!   LA        0.96     MK        1.01     NL        1.05     OV        1.00     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.96     HN        1.06     KP        0.97     
!   LA        0.97     MK        0.97     NL        1.00     OV        0.97     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.08     KP        0.94     
!   LA        0.93     MK        1.02     NL        1.01     OV        0.97     
!   PT        0.92     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.94     HN        1.02     KP        0.96     
!   LA        0.96     MK        0.96     NL        0.97     OV        0.93     
!   PT        0.91     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.072032Jy  sigma=1.407718
! Fit after  self-cal, rms=0.071139Jy  sigma=1.377025
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8276 mas, bmaj=2.075 mas, bpa=-5.381 degrees
! Estimated noise=0.219042 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7, -8.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00285354 Jy
! Component: 100  -  total flux cleaned = 0.00384042 Jy
! Component: 150  -  total flux cleaned = 0.00438053 Jy
! Component: 200  -  total flux cleaned = 0.00471821 Jy
! Total flux subtracted in 200 components = 0.00471821 Jy
! Clean residual min=-0.002616 max=0.002895 Jy/beam
! Clean residual mean=-0.000002 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.276132 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 105 components and 0.276132 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070958Jy  sigma=1.372320
! Fit after  self-cal, rms=0.070971Jy  sigma=1.371987
! Inverting map 
! Added new window around map position (-3.6, -3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00227904 Jy
! Component: 100  -  total flux cleaned = 0.00285507 Jy
! Component: 150  -  total flux cleaned = 0.00308043 Jy
! Component: 200  -  total flux cleaned = 0.003238 Jy
! Total flux subtracted in 200 components = 0.003238 Jy
! Clean residual min=-0.002305 max=0.001855 Jy/beam
! Clean residual mean=-0.000001 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.27937 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 131 components and 0.27937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070869Jy  sigma=1.369477
! Fit after  self-cal, rms=0.070857Jy  sigma=1.369182
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070857Jy  sigma=1.369182
! Fit after  self-cal, rms=0.071169Jy  sigma=1.364005
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8268 mas, bmaj=2.073 mas, bpa=-5.408 degrees
! Estimated noise=0.21863 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000744827 Jy
! Component: 100  -  total flux cleaned = 0.00120683 Jy
! Component: 150  -  total flux cleaned = 0.00137858 Jy
! Component: 200  -  total flux cleaned = 0.00137932 Jy
! Total flux subtracted in 200 components = 0.00137932 Jy
! Clean residual min=-0.001661 max=0.001707 Jy/beam
! Clean residual mean=-0.000001 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.28075 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 143 components and 0.28075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071127Jy  sigma=1.362975
! Fit after  self-cal, rms=0.071134Jy  sigma=1.362886
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-16.8, 8.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013582 Jy
! Component: 100  -  total flux cleaned = 0.00149507 Jy
! Component: 150  -  total flux cleaned = 0.0015241 Jy
! Component: 200  -  total flux cleaned = 0.00147481 Jy
! Total flux subtracted in 200 components = 0.00147481 Jy
! Clean residual min=-0.001702 max=0.001402 Jy/beam
! Clean residual mean=-0.000001 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.282224 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 164 components and 0.282224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071097Jy  sigma=1.362039
! Fit after  self-cal, rms=0.071094Jy  sigma=1.362018
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071094Jy  sigma=1.362018
! Fit after  self-cal, rms=0.071303Jy  sigma=1.361775
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8268 mas, bmaj=2.073 mas, bpa=-5.408 degrees
! Estimated noise=0.218512 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.32171e-06 Jy
! Component: 100  -  total flux cleaned = -4.10367e-06 Jy
! Component: 150  -  total flux cleaned = -5.05787e-05 Jy
! Component: 200  -  total flux cleaned = -4.97431e-05 Jy
! Total flux subtracted in 200 components = -4.97431e-05 Jy
! Clean residual min=-0.001628 max=0.001317 Jy/beam
! Clean residual mean=-0.000001 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.282175 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 172 components and 0.282175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071286Jy  sigma=1.361425
! Fit after  self-cal, rms=0.071289Jy  sigma=1.361412
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.05127e-05 Jy
! Component: 100  -  total flux cleaned = -0.000101643 Jy
! Component: 150  -  total flux cleaned = -0.000158935 Jy
! Component: 200  -  total flux cleaned = -0.000214156 Jy
! Total flux subtracted in 200 components = -0.000214156 Jy
! Clean residual min=-0.001576 max=0.001297 Jy/beam
! Clean residual mean=-0.000001 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.28196 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 179 components and 0.28196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071279Jy  sigma=1.361197
! Fit after  self-cal, rms=0.071279Jy  sigma=1.361195
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071279Jy  sigma=1.361195
! Fit after  self-cal, rms=0.071341Jy  sigma=1.361165
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.248 mas, bmaj=4.734 mas, bpa=0.1991 degrees
! Estimated noise=0.277229 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000584828 Jy
! Component: 100  -  total flux cleaned = -0.000929532 Jy
! Component: 150  -  total flux cleaned = -0.00107398 Jy
! Component: 200  -  total flux cleaned = -0.00114071 Jy
! Total flux subtracted in 200 components = -0.00114071 Jy
! Clean residual min=-0.001424 max=0.001366 Jy/beam
! Clean residual mean=-0.000002 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.28082 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 190 components and 0.28082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071337Jy  sigma=1.361072
! Fit after  self-cal, rms=0.071338Jy  sigma=1.361063
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000137259 Jy
! Component: 100  -  total flux cleaned = -0.000199362 Jy
! Component: 150  -  total flux cleaned = -0.00024674 Jy
! Component: 200  -  total flux cleaned = -0.000292142 Jy
! Total flux subtracted in 200 components = -0.000292142 Jy
! Clean residual min=-0.001410 max=0.001352 Jy/beam
! Clean residual mean=-0.000002 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.280528 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 194 components and 0.280527 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071336Jy  sigma=1.361019
! Fit after  self-cal, rms=0.071337Jy  sigma=1.361018
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8268 mas, bmaj=2.073 mas, bpa=-5.402 degrees
! Estimated noise=0.218468 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8268 x 2.073 at -5.402 degrees (North through East)
! Clean map  min=-0.0013953  max=0.20778 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.612 mas, bmaj=1.627 mas, bpa=-4.908 degrees
! Estimated noise=0.39891 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.152637 Jy
! Component: 100  -  total flux cleaned = 0.193726 Jy
! Component: 150  -  total flux cleaned = 0.213363 Jy
! Component: 200  -  total flux cleaned = 0.226719 Jy
! Total flux subtracted in 200 components = 0.226719 Jy
! Clean residual min=-0.004496 max=0.007474 Jy/beam
! Clean residual mean=-0.000002 rms=0.001082 Jy/beam
! Combined flux in latest and established models = 0.226718 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.226718 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8268 mas, bmaj=2.073 mas, bpa=-5.402 degrees
! Estimated noise=0.218468 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0174606 Jy
! Component: 100  -  total flux cleaned = 0.0276786 Jy
! Component: 150  -  total flux cleaned = 0.0341847 Jy
! Component: 200  -  total flux cleaned = 0.0388561 Jy
! Total flux subtracted in 200 components = 0.0388561 Jy
! Clean residual min=-0.002071 max=0.002657 Jy/beam
! Clean residual mean=-0.000005 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.265575 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 65 components and 0.265575 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00347735 Jy
! Component: 100  -  total flux cleaned = 0.0061448 Jy
! Component: 150  -  total flux cleaned = 0.00827083 Jy
! Component: 200  -  total flux cleaned = 0.00997544 Jy
! Total flux subtracted in 200 components = 0.00997544 Jy
! Clean residual min=-0.001784 max=0.001567 Jy/beam
! Clean residual mean=-0.000003 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.27555 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 99 components and 0.27555 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.248 mas, bmaj=4.734 mas, bpa=0.1991 degrees
! Estimated noise=0.277229 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.002141 Jy
! Component: 100  -  total flux cleaned = 0.00346214 Jy
! Component: 150  -  total flux cleaned = 0.00420997 Jy
! Component: 200  -  total flux cleaned = 0.00435551 Jy
! Total flux subtracted in 200 components = 0.00435551 Jy
! Clean residual min=-0.001515 max=0.001398 Jy/beam
! Clean residual mean=-0.000003 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.279906 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.8224e-05 Jy
! Component: 100  -  total flux cleaned = 6.96477e-05 Jy
! Component: 150  -  total flux cleaned = 5.02918e-05 Jy
! Component: 200  -  total flux cleaned = 5.02461e-05 Jy
! Total flux subtracted in 200 components = 5.02461e-05 Jy
! Clean residual min=-0.001464 max=0.001379 Jy/beam
! Clean residual mean=-0.000003 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.279956 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 140 components and 0.279956 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8268 mas, bmaj=2.073 mas, bpa=-5.402 degrees
! Estimated noise=0.218468 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000167465 Jy
! Component: 100  -  total flux cleaned = 0.000137049 Jy
! Component: 150  -  total flux cleaned = 0.000187618 Jy
! Component: 200  -  total flux cleaned = 0.000259677 Jy
! Total flux subtracted in 200 components = 0.000259677 Jy
! Clean residual min=-0.001542 max=0.001209 Jy/beam
! Clean residual mean=-0.000002 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.280215 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 162 components and 0.280215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071348Jy  sigma=1.361158
! Fit after  self-cal, rms=0.071338Jy  sigma=1.361051
wmodel /J1423-2218_X_map.mod
! wmodel: Unable to open new model file: /J1423-2218_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1423-2218_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8268 x 2.073 at -5.402 degrees (North through East)
! Clean map  min=-0.0013907  max=0.20841 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1423-2218_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.208409 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000297602 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.428391 0.428391 0.856781 1.71356 3.42713 6.85425 13.7085 27.417 54.834
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.208 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  700.295 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1423-2218_X_dfm.log closed on Thu May 19 20:22:18 2016