! Started logfile: /scr/pima/bg219b_uvs/J1353+7532_X_dfm.log on Thu May 19 20:21:23 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1353+7532_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1353+7532_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.896581 visibilities/baseline/integration-bin.
! Found source: J1353+7532
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25176 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1353+7532_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.075286Jy  sigma=24.218498
! Fit after  self-cal, rms=0.627722Jy  sigma=14.061727
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8162 mas, bmaj=0.8716 mas, bpa=1.043 degrees
! Estimated noise=0.448188 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.281142 Jy
! Component: 100  -  total flux cleaned = 0.352763 Jy
! Total flux subtracted in 100 components = 0.352763 Jy
! Clean residual min=-0.009045 max=0.026777 Jy/beam
! Clean residual mean=-0.000014 rms=0.002227 Jy/beam
! Combined flux in latest and established models = 0.352763 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.352763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080674Jy  sigma=1.752165
! Fit after  self-cal, rms=0.080662Jy  sigma=1.751757
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0273684 Jy
! Component: 100  -  total flux cleaned = 0.0416446 Jy
! Total flux subtracted in 100 components = 0.0416446 Jy
! Clean residual min=-0.004751 max=0.008831 Jy/beam
! Clean residual mean=-0.000007 rms=0.001278 Jy/beam
! Combined flux in latest and established models = 0.394408 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 16 components and 0.394408 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068568Jy  sigma=1.448702
! Fit after  self-cal, rms=0.068566Jy  sigma=1.448462
! Inverting map 
! Added new window around map position (-6.2, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00952023 Jy
! Component: 100  -  total flux cleaned = 0.0158369 Jy
! Total flux subtracted in 100 components = 0.0158369 Jy
! Clean residual min=-0.004717 max=0.006006 Jy/beam
! Clean residual mean=-0.000005 rms=0.001117 Jy/beam
! Combined flux in latest and established models = 0.410245 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 20 components and 0.410245 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067047Jy  sigma=1.412870
! Fit after  self-cal, rms=0.066985Jy  sigma=1.411036
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.099 mas, bmaj=1.121 mas, bpa=6.363 degrees
! Estimated noise=0.211807 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00537925 Jy
! Component: 100  -  total flux cleaned = 0.00732903 Jy
! Component: 150  -  total flux cleaned = 0.00810941 Jy
! Component: 200  -  total flux cleaned = 0.008669 Jy
! Total flux subtracted in 200 components = 0.008669 Jy
! Clean residual min=-0.004085 max=0.004491 Jy/beam
! Clean residual mean=-0.000008 rms=0.000978 Jy/beam
! Combined flux in latest and established models = 0.418914 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 30 components and 0.418914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066467Jy  sigma=1.399875
! Fit after  self-cal, rms=0.066463Jy  sigma=1.399601
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.099 x 1.121 at 6.363 degrees (North through East)
! Clean map  min=-0.0039101  max=0.37232 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.03     KP        0.97     
!   LA        0.97     MK        0.96     NL        1.02     OV        0.97     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.04     HN        1.02     KP        0.98     
!   LA        1.00     MK        1.00     NL        1.03     OV        1.02     
!   PT        1.00     SC        1.09     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        1.06     KP        1.02     
!   LA        1.01     MK        1.00     NL        1.05     OV        1.02     
!   PT        1.01     SC        1.09     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.98     
!   LA        0.97     MK        0.99     NL        1.00     OV        0.98     
!   PT        0.99     SC        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.01     KP        0.97     
!   LA        0.97     MK        0.97     NL        1.00     OV        0.98     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.01     KP        0.99     
!   LA        0.98     MK        1.00     NL        1.04     OV        0.99     
!   PT        1.00     SC        1.05     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.04     HN        1.06     KP        1.00     
!   LA        0.99     MK        1.04     NL        1.03     OV        1.00     
!   PT        1.01     SC        1.10     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.02     KP        0.98     
!   LA        0.98     MK        0.99     NL        1.03     OV        0.97     
!   PT        0.99     SC        1.06     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.00     KP        0.98     
!   LA        0.95     MK        1.01     NL        1.04     OV        0.99     
!   PT        0.97     SC        1.07     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.98     KP        0.97     
!   LA        0.95     MK        0.98     NL        1.00     OV        0.97     
!   PT        0.94     SC        1.05     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.99     KP        0.94     
!   LA        0.94     MK        0.99     NL        1.01     OV        0.97     
!   PT        0.96     SC        1.04     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.96     HN        0.93     KP        0.95     
!   LA        0.95     MK        0.95     NL        0.97     OV        0.93     
!   PT        0.92     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.066463Jy  sigma=1.399601
! Fit after  self-cal, rms=0.062818Jy  sigma=1.320720
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.106 mas, bmaj=1.125 mas, bpa=3.348 degrees
! Estimated noise=0.211502 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8.6, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000553855 Jy
! Component: 100  -  total flux cleaned = -0.00136218 Jy
! Component: 150  -  total flux cleaned = -0.00194291 Jy
! Component: 200  -  total flux cleaned = -0.00254803 Jy
! Total flux subtracted in 200 components = -0.00254803 Jy
! Clean residual min=-0.002366 max=0.002353 Jy/beam
! Clean residual mean=-0.000003 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.416366 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 54 components and 0.416366 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062584Jy  sigma=1.316058
! Fit after  self-cal, rms=0.062587Jy  sigma=1.315778
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062587Jy  sigma=1.315778
! Fit after  self-cal, rms=0.062526Jy  sigma=1.307701
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.103 mas, bmaj=1.13 mas, bpa=2.062 degrees
! Estimated noise=0.211306 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000901113 Jy
! Component: 100  -  total flux cleaned = -0.00102724 Jy
! Component: 150  -  total flux cleaned = -0.00109105 Jy
! Component: 200  -  total flux cleaned = -0.00123491 Jy
! Total flux subtracted in 200 components = -0.00123491 Jy
! Clean residual min=-0.002197 max=0.001519 Jy/beam
! Clean residual mean=-0.000001 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.415131 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 61 components and 0.415131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062459Jy  sigma=1.306568
! Fit after  self-cal, rms=0.062460Jy  sigma=1.306516
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.03909e-05 Jy
! Component: 100  -  total flux cleaned = -3.83238e-05 Jy
! Component: 150  -  total flux cleaned = -6.17022e-05 Jy
! Component: 200  -  total flux cleaned = -0.000104649 Jy
! Total flux subtracted in 200 components = -0.000104649 Jy
! Clean residual min=-0.002184 max=0.001453 Jy/beam
! Clean residual mean=-0.000001 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.415026 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 68 components and 0.415026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062441Jy  sigma=1.306192
! Fit after  self-cal, rms=0.062439Jy  sigma=1.306175
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062439Jy  sigma=1.306175
! Fit after  self-cal, rms=0.062504Jy  sigma=1.305757
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.105 mas, bmaj=1.132 mas, bpa=1.514 degrees
! Estimated noise=0.21127 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00123541 Jy
! Component: 100  -  total flux cleaned = -0.00147859 Jy
! Component: 150  -  total flux cleaned = -0.00154926 Jy
! Component: 200  -  total flux cleaned = -0.00159104 Jy
! Total flux subtracted in 200 components = -0.00159104 Jy
! Clean residual min=-0.002056 max=0.001378 Jy/beam
! Clean residual mean=-0.000001 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.413435 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 69 components and 0.413435 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062468Jy  sigma=1.305168
! Fit after  self-cal, rms=0.062468Jy  sigma=1.305158
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.85825e-05 Jy
! Component: 100  -  total flux cleaned = -0.000105551 Jy
! Component: 150  -  total flux cleaned = -0.000122316 Jy
! Component: 200  -  total flux cleaned = -0.000138944 Jy
! Total flux subtracted in 200 components = -0.000138944 Jy
! Clean residual min=-0.002019 max=0.001369 Jy/beam
! Clean residual mean=-0.000001 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.413296 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 74 components and 0.413296 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062458Jy  sigma=1.304977
! Fit after  self-cal, rms=0.062457Jy  sigma=1.304972
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062457Jy  sigma=1.304972
! Fit after  self-cal, rms=0.062534Jy  sigma=1.304702
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.389 mas, bmaj=2.522 mas, bpa=52.67 degrees
! Estimated noise=0.271166 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000819134 Jy
! Component: 100  -  total flux cleaned = -0.000866658 Jy
! Component: 150  -  total flux cleaned = -0.000962802 Jy
! Component: 200  -  total flux cleaned = -0.000997676 Jy
! Total flux subtracted in 200 components = -0.000997676 Jy
! Clean residual min=-0.001938 max=0.001546 Jy/beam
! Clean residual mean=-0.000002 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.412299 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 81 components and 0.412299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062522Jy  sigma=1.304547
! Fit after  self-cal, rms=0.062522Jy  sigma=1.304519
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.5507e-05 Jy
! Component: 100  -  total flux cleaned = -3.28797e-05 Jy
! Component: 150  -  total flux cleaned = -4.50285e-05 Jy
! Component: 200  -  total flux cleaned = -4.48294e-05 Jy
! Total flux subtracted in 200 components = -4.48294e-05 Jy
! Clean residual min=-0.001932 max=0.001534 Jy/beam
! Clean residual mean=-0.000002 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.412254 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 84 components and 0.412254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062521Jy  sigma=1.304504
! Fit after  self-cal, rms=0.062521Jy  sigma=1.304498
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.106 mas, bmaj=1.134 mas, bpa=1.255 degrees
! Estimated noise=0.211269 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.106 x 1.134 at 1.255 degrees (North through East)
! Clean map  min=-0.0019262  max=0.37194 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8211 mas, bmaj=0.8814 mas, bpa=-0.1425 degrees
! Estimated noise=0.449944 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.282156 Jy
! Component: 100  -  total flux cleaned = 0.35266 Jy
! Component: 150  -  total flux cleaned = 0.378822 Jy
! Component: 200  -  total flux cleaned = 0.391348 Jy
! Total flux subtracted in 200 components = 0.391348 Jy
! Clean residual min=-0.003684 max=0.005873 Jy/beam
! Clean residual mean=-0.000004 rms=0.000852 Jy/beam
! Combined flux in latest and established models = 0.391348 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.391348 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.106 mas, bmaj=1.134 mas, bpa=1.255 degrees
! Estimated noise=0.211269 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00870537 Jy
! Component: 100  -  total flux cleaned = 0.0132521 Jy
! Component: 150  -  total flux cleaned = 0.0162825 Jy
! Component: 200  -  total flux cleaned = 0.0180753 Jy
! Total flux subtracted in 200 components = 0.0180753 Jy
! Clean residual min=-0.001613 max=0.001506 Jy/beam
! Clean residual mean=-0.000002 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.409424 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 28 components and 0.409424 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.389 mas, bmaj=2.522 mas, bpa=52.67 degrees
! Estimated noise=0.271166 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159009 Jy
! Component: 100  -  total flux cleaned = 0.00194161 Jy
! Component: 150  -  total flux cleaned = 0.00214809 Jy
! Component: 200  -  total flux cleaned = 0.00232907 Jy
! Total flux subtracted in 200 components = 0.00232907 Jy
! Clean residual min=-0.001914 max=0.001463 Jy/beam
! Clean residual mean=-0.000003 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.411753 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000126672 Jy
! Component: 100  -  total flux cleaned = 0.000216764 Jy
! Component: 150  -  total flux cleaned = 0.00029284 Jy
! Component: 200  -  total flux cleaned = 0.000315385 Jy
! Total flux subtracted in 200 components = 0.000315385 Jy
! Clean residual min=-0.001899 max=0.001515 Jy/beam
! Clean residual mean=-0.000002 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.412068 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 55 components and 0.412068 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.106 mas, bmaj=1.134 mas, bpa=1.255 degrees
! Estimated noise=0.211269 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000144961 Jy
! Component: 100  -  total flux cleaned = 6.67522e-05 Jy
! Component: 150  -  total flux cleaned = 7.93423e-07 Jy
! Component: 200  -  total flux cleaned = 1.97803e-06 Jy
! Total flux subtracted in 200 components = 1.97803e-06 Jy
! Clean residual min=-0.001626 max=0.001333 Jy/beam
! Clean residual mean=-0.000001 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.41207 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 66 components and 0.41207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062557Jy  sigma=1.305005
! Fit after  self-cal, rms=0.062550Jy  sigma=1.304878
wmodel /J1353+7532_X_map.mod
! wmodel: Unable to open new model file: /J1353+7532_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1353+7532_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.106 x 1.134 at 1.255 degrees (North through East)
! Clean map  min=-0.0016333  max=0.37298 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1353+7532_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.372981 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000330962 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.266203 0.266203 0.532406 1.06481 2.12962 4.25925 8.51849 17.037 34.074 68.1479
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.372 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1126.96 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1353+7532_X_dfm.log closed on Thu May 19 20:21:26 2016