! Started logfile: /scr/pima/bg219b_uvs/J1317+4115_X_dfm.log on Thu May 19 20:20:55 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1317+4115_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1317+4115_X_uva.fits
! AN table 1: 56 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.710714 visibilities/baseline/integration-bin.
! Found source: J1317+4115
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 21492 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1317+4115_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005203Jy  sigma=25.092939
! Fit after  self-cal, rms=0.932403Jy  sigma=23.218905
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9874 mas, bmaj=1.276 mas, bpa=24.7 degrees
! Estimated noise=0.479782 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0452326 Jy
! Component: 100  -  total flux cleaned = 0.0656215 Jy
! Total flux subtracted in 100 components = 0.0656215 Jy
! Clean residual min=-0.007380 max=0.013268 Jy/beam
! Clean residual mean=0.000022 rms=0.002405 Jy/beam
! Combined flux in latest and established models = 0.0656215 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.0656215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075276Jy  sigma=1.829597
! Fit after  self-cal, rms=0.073978Jy  sigma=1.803181
! Inverting map 
! Added new window around map position (1.2, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0166466 Jy
! Component: 100  -  total flux cleaned = 0.0286837 Jy
! Total flux subtracted in 100 components = 0.0286837 Jy
! Clean residual min=-0.005982 max=0.011915 Jy/beam
! Clean residual mean=0.000013 rms=0.001852 Jy/beam
! Combined flux in latest and established models = 0.0943052 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 39 components and 0.0943052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067354Jy  sigma=1.625243
! Fit after  self-cal, rms=0.066876Jy  sigma=1.616160
! Inverting map 
! Added new window around map position (1.8, 2.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130121 Jy
! Component: 100  -  total flux cleaned = 0.0217994 Jy
! Total flux subtracted in 100 components = 0.0217994 Jy
! Clean residual min=-0.005021 max=0.007353 Jy/beam
! Clean residual mean=0.000010 rms=0.001447 Jy/beam
! Combined flux in latest and established models = 0.116105 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 54 components and 0.116105 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063125Jy  sigma=1.514246
! Fit after  self-cal, rms=0.062570Jy  sigma=1.501523
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00943325 Jy
! Component: 100  -  total flux cleaned = 0.0157409 Jy
! Total flux subtracted in 100 components = 0.0157409 Jy
! Clean residual min=-0.004917 max=0.006460 Jy/beam
! Clean residual mean=0.000007 rms=0.001245 Jy/beam
! Combined flux in latest and established models = 0.131846 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 59 components and 0.131846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060608Jy  sigma=1.446995
! Fit after  self-cal, rms=0.060300Jy  sigma=1.440014
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.34 mas, bmaj=1.608 mas, bpa=24.24 degrees
! Estimated noise=0.197486 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00872815 Jy
! Component: 100  -  total flux cleaned = 0.0144892 Jy
! Component: 150  -  total flux cleaned = 0.0176254 Jy
! Component: 200  -  total flux cleaned = 0.0191037 Jy
! Total flux subtracted in 200 components = 0.0191037 Jy
! Clean residual min=-0.004943 max=0.006126 Jy/beam
! Clean residual mean=-0.000022 rms=0.001203 Jy/beam
! Combined flux in latest and established models = 0.150949 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 76 components and 0.150949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058767Jy  sigma=1.397493
! Fit after  self-cal, rms=0.058594Jy  sigma=1.393219
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.34 x 1.608 at 24.24 degrees (North through East)
! Clean map  min=-0.0047965  max=0.053654 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        0.98     HN        1.15     KP        0.93     
!   LA        0.88     MK        1.14     NL        1.16     OV        1.01     
!   PT        1.00     SC        1.19     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.98     HN        1.08     KP        0.92     
!   LA        0.89     MK        1.07     NL        1.05     OV        1.00     
!   PT        0.99     SC        1.10     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.97     HN        1.04     KP        0.94     
!   LA        0.89     MK        1.16     NL        1.15     OV        1.08     
!   PT        1.08     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.93     HN        0.89     KP        0.97     
!   LA        0.89     MK        1.07     NL        1.15     OV        0.99     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.95     HN        1.07     KP        0.90     
!   LA        0.88     MK        0.97     NL        1.10     OV        1.01     
!   PT        0.97     SC        0.93     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        0.96     KP        0.92     
!   LA        0.90     MK        1.01     NL        1.05     OV        0.98     
!   PT        0.96     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.058594Jy  sigma=1.393219
! Fit after  self-cal, rms=0.058583Jy  sigma=1.382481
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.352 mas, bmaj=1.618 mas, bpa=24.42 degrees
! Estimated noise=0.197634 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-15.4, 6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00204539 Jy
! Component: 100  -  total flux cleaned = 0.00309465 Jy
! Component: 150  -  total flux cleaned = 0.00383152 Jy
! Component: 200  -  total flux cleaned = 0.00449392 Jy
! Total flux subtracted in 200 components = 0.00449392 Jy
! Clean residual min=-0.003583 max=0.004361 Jy/beam
! Clean residual mean=-0.000012 rms=0.000896 Jy/beam
! Combined flux in latest and established models = 0.155443 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 90 components and 0.155443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058007Jy  sigma=1.367066
! Fit after  self-cal, rms=0.057935Jy  sigma=1.363968
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057935Jy  sigma=1.363968
! Fit after  self-cal, rms=0.057528Jy  sigma=1.359311
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.344 mas, bmaj=1.616 mas, bpa=25.42 degrees
! Estimated noise=0.196649 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011303 Jy
! Component: 100  -  total flux cleaned = 0.00189032 Jy
! Component: 150  -  total flux cleaned = 0.00256127 Jy
! Component: 200  -  total flux cleaned = 0.00309926 Jy
! Total flux subtracted in 200 components = 0.00309926 Jy
! Clean residual min=-0.003020 max=0.003940 Jy/beam
! Clean residual mean=-0.000009 rms=0.000732 Jy/beam
! Combined flux in latest and established models = 0.158542 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 93 components and 0.158542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057230Jy  sigma=1.351886
! Fit after  self-cal, rms=0.057188Jy  sigma=1.350346
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00382032 Jy
! Component: 100  -  total flux cleaned = 0.00502886 Jy
! Component: 150  -  total flux cleaned = 0.00603703 Jy
! Component: 200  -  total flux cleaned = 0.0068185 Jy
! Total flux subtracted in 200 components = 0.0068185 Jy
! Clean residual min=-0.002459 max=0.002494 Jy/beam
! Clean residual mean=-0.000005 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.165361 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 107 components and 0.165361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056802Jy  sigma=1.340065
! Fit after  self-cal, rms=0.056740Jy  sigma=1.338283
! Inverting map 
! Added new window around map position (-32.4, -31.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187717 Jy
! Component: 100  -  total flux cleaned = 0.0027329 Jy
! Component: 150  -  total flux cleaned = 0.00349523 Jy
! Component: 200  -  total flux cleaned = 0.00390219 Jy
! Total flux subtracted in 200 components = 0.00390219 Jy
! Clean residual min=-0.002054 max=0.002059 Jy/beam
! Clean residual mean=-0.000003 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.169263 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 125 components and 0.169263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056573Jy  sigma=1.333952
! Fit after  self-cal, rms=0.056549Jy  sigma=1.333319
! Inverting map 
! Added new window around map position (2.6, 37.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0014167 Jy
! Component: 100  -  total flux cleaned = 0.00225759 Jy
! Component: 150  -  total flux cleaned = 0.00279048 Jy
! Component: 200  -  total flux cleaned = 0.00305303 Jy
! Total flux subtracted in 200 components = 0.00305303 Jy
! Clean residual min=-0.001921 max=0.001922 Jy/beam
! Clean residual mean=-0.000003 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.172316 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 142 components and 0.172316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056436Jy  sigma=1.330685
! Fit after  self-cal, rms=0.056426Jy  sigma=1.330322
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056426Jy  sigma=1.330322
! Fit after  self-cal, rms=0.055285Jy  sigma=1.323602
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.348 mas, bmaj=1.602 mas, bpa=23.99 degrees
! Estimated noise=0.194285 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100799 Jy
! Component: 100  -  total flux cleaned = 0.00116187 Jy
! Component: 150  -  total flux cleaned = 0.00128278 Jy
! Component: 200  -  total flux cleaned = 0.00143028 Jy
! Total flux subtracted in 200 components = 0.00143028 Jy
! Clean residual min=-0.001407 max=0.001544 Jy/beam
! Clean residual mean=-0.000002 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.173746 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 149 components and 0.173746 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055205Jy  sigma=1.321678
! Fit after  self-cal, rms=0.055212Jy  sigma=1.321163
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000285794 Jy
! Component: 100  -  total flux cleaned = 0.000435251 Jy
! Component: 150  -  total flux cleaned = 0.00056727 Jy
! Component: 200  -  total flux cleaned = 0.000656163 Jy
! Total flux subtracted in 200 components = 0.000656163 Jy
! Clean residual min=-0.001322 max=0.001480 Jy/beam
! Clean residual mean=-0.000001 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.174403 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 158 components and 0.174403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055169Jy  sigma=1.320132
! Fit after  self-cal, rms=0.055168Jy  sigma=1.320007
! Inverting map 
! Added new window around map position (-42.8, -23.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000985644 Jy
! Component: 100  -  total flux cleaned = 0.00122677 Jy
! Component: 150  -  total flux cleaned = 0.00134689 Jy
! Component: 200  -  total flux cleaned = 0.00134876 Jy
! Total flux subtracted in 200 components = 0.00134876 Jy
! Clean residual min=-0.001225 max=0.001337 Jy/beam
! Clean residual mean=-0.000001 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.175751 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 177 components and 0.175751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055124Jy  sigma=1.318848
! Fit after  self-cal, rms=0.055116Jy  sigma=1.318723
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055116Jy  sigma=1.318723
! Fit after  self-cal, rms=0.054852Jy  sigma=1.318504
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.429 mas, bmaj=2.638 mas, bpa=62.57 degrees
! Estimated noise=0.223878 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111208 Jy
! Component: 100  -  total flux cleaned = 0.00154831 Jy
! Component: 150  -  total flux cleaned = 0.0017 Jy
! Component: 200  -  total flux cleaned = 0.00183361 Jy
! Total flux subtracted in 200 components = 0.00183361 Jy
! Clean residual min=-0.001246 max=0.001642 Jy/beam
! Clean residual mean=-0.000003 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.177585 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 209 components and 0.177585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054834Jy  sigma=1.317952
! Fit after  self-cal, rms=0.054835Jy  sigma=1.317887
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (22.6, 38).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121806 Jy
! Component: 100  -  total flux cleaned = 0.00175741 Jy
! Component: 150  -  total flux cleaned = 0.00210643 Jy
! Component: 200  -  total flux cleaned = 0.00241393 Jy
! Total flux subtracted in 200 components = 0.00241393 Jy
! Clean residual min=-0.001073 max=0.001521 Jy/beam
! Clean residual mean=-0.000003 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.179999 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 246 components and 0.179999 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054803Jy  sigma=1.317189
! Fit after  self-cal, rms=0.054803Jy  sigma=1.317103
! Inverting map 
! Added new window around map position (-28.8, -0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122759 Jy
! Component: 100  -  total flux cleaned = 0.001741 Jy
! Component: 150  -  total flux cleaned = 0.00217085 Jy
! Component: 200  -  total flux cleaned = 0.00254419 Jy
! Total flux subtracted in 200 components = 0.00254419 Jy
! Clean residual min=-0.000865 max=0.001063 Jy/beam
! Clean residual mean=-0.000001 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.182543 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 280 components and 0.182543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054771Jy  sigma=1.316349
! Fit after  self-cal, rms=0.054774Jy  sigma=1.316270
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.352 mas, bmaj=1.592 mas, bpa=22.64 degrees
! Estimated noise=0.193598 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.352 x 1.592 at 22.64 degrees (North through East)
! Clean map  min=-0.0013704  max=0.046001 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9897 mas, bmaj=1.258 mas, bpa=23.25 degrees
! Estimated noise=0.465964 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0446388 Jy
! Component: 100  -  total flux cleaned = 0.0715313 Jy
! Component: 150  -  total flux cleaned = 0.0900996 Jy
! Component: 200  -  total flux cleaned = 0.103705 Jy
! Total flux subtracted in 200 components = 0.103705 Jy
! Clean residual min=-0.005944 max=0.008042 Jy/beam
! Clean residual mean=0.000013 rms=0.001616 Jy/beam
! Combined flux in latest and established models = 0.103705 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 43 model components to the UV plane model.
! The established model now contains 43 components and 0.103705 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.352 mas, bmaj=1.592 mas, bpa=22.64 degrees
! Estimated noise=0.193598 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0172258 Jy
! Component: 100  -  total flux cleaned = 0.0290077 Jy
! Component: 150  -  total flux cleaned = 0.0376757 Jy
! Component: 200  -  total flux cleaned = 0.0442982 Jy
! Total flux subtracted in 200 components = 0.0442982 Jy
! Clean residual min=-0.002887 max=0.004088 Jy/beam
! Clean residual mean=-0.000017 rms=0.000891 Jy/beam
! Combined flux in latest and established models = 0.148003 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 100 components and 0.148003 Jy
! Inverting map 
! Added new window around map position (0.6, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00528453 Jy
! Component: 100  -  total flux cleaned = 0.00955566 Jy
! Component: 150  -  total flux cleaned = 0.0130832 Jy
! Component: 200  -  total flux cleaned = 0.0160414 Jy
! Total flux subtracted in 200 components = 0.0160414 Jy
! Clean residual min=-0.001808 max=0.002164 Jy/beam
! Clean residual mean=-0.000009 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.164045 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 130 components and 0.164045 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.429 mas, bmaj=2.638 mas, bpa=62.57 degrees
! Estimated noise=0.223878 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00364014 Jy
! Component: 100  -  total flux cleaned = 0.00621166 Jy
! Component: 150  -  total flux cleaned = 0.0081922 Jy
! Component: 200  -  total flux cleaned = 0.00958277 Jy
! Total flux subtracted in 200 components = 0.00958277 Jy
! Clean residual min=-0.001642 max=0.001799 Jy/beam
! Clean residual mean=-0.000009 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.173627 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113815 Jy
! Component: 100  -  total flux cleaned = 0.00214413 Jy
! Component: 150  -  total flux cleaned = 0.00308988 Jy
! Component: 200  -  total flux cleaned = 0.0037848 Jy
! Total flux subtracted in 200 components = 0.0037848 Jy
! Clean residual min=-0.001398 max=0.001502 Jy/beam
! Clean residual mean=-0.000006 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.177412 Jy
! Adding 106 model components to the UV plane model.
! The established model now contains 219 components and 0.177412 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.352 mas, bmaj=1.592 mas, bpa=22.64 degrees
! Estimated noise=0.193598 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000436885 Jy
! Component: 100  -  total flux cleaned = 0.000762064 Jy
! Component: 150  -  total flux cleaned = 0.00110018 Jy
! Component: 200  -  total flux cleaned = 0.00141796 Jy
! Total flux subtracted in 200 components = 0.00141796 Jy
! Clean residual min=-0.001207 max=0.001161 Jy/beam
! Clean residual mean=-0.000002 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.17883 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 256 components and 0.17883 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054809Jy  sigma=1.317302
! Fit after  self-cal, rms=0.054747Jy  sigma=1.315687
wmodel /J1317+4115_X_map.mod
! wmodel: Unable to open new model file: /J1317+4115_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1317+4115_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.352 x 1.592 at 22.64 degrees (North through East)
! Clean map  min=-0.0010061  max=0.044547 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1317+4115_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0445468 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000266162 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.79247 1.79247 3.58493 7.16987 14.3397 28.6795 57.3589
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.044 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  167.367 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1317+4115_X_dfm.log closed on Thu May 19 20:21:00 2016