! Started logfile: /scr/pima/bg219b_uvs/J1312+4828_X_dfm.log on Thu May 19 20:20:47 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1312+4828_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1312+4828_X_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.936643 visibilities/baseline/integration-bin.
! Found source: J1312+4828
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 23772 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1312+4828_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007695Jy  sigma=25.169621
! Fit after  self-cal, rms=0.890475Jy  sigma=22.202443
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8385 mas, bmaj=0.9479 mas, bpa=-4.197 degrees
! Estimated noise=0.393113 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0825434 Jy
! Component: 100  -  total flux cleaned = 0.103053 Jy
! Total flux subtracted in 100 components = 0.103053 Jy
! Clean residual min=-0.004390 max=0.008566 Jy/beam
! Clean residual mean=-0.000002 rms=0.001096 Jy/beam
! Combined flux in latest and established models = 0.103053 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.103053 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064189Jy  sigma=1.501136
! Fit after  self-cal, rms=0.064147Jy  sigma=1.500047
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00950582 Jy
! Component: 100  -  total flux cleaned = 0.014573 Jy
! Total flux subtracted in 100 components = 0.014573 Jy
! Clean residual min=-0.004293 max=0.004810 Jy/beam
! Clean residual mean=-0.000003 rms=0.000885 Jy/beam
! Combined flux in latest and established models = 0.117626 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 16 components and 0.117626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062420Jy  sigma=1.450004
! Fit after  self-cal, rms=0.062412Jy  sigma=1.449571
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.114 mas, bmaj=1.264 mas, bpa=3.382 degrees
! Estimated noise=0.189093 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00437514 Jy
! Component: 100  -  total flux cleaned = 0.00668846 Jy
! Component: 150  -  total flux cleaned = 0.00802672 Jy
! Component: 200  -  total flux cleaned = 0.0088097 Jy
! Total flux subtracted in 200 components = 0.0088097 Jy
! Clean residual min=-0.002758 max=0.003099 Jy/beam
! Clean residual mean=-0.000014 rms=0.000719 Jy/beam
! Combined flux in latest and established models = 0.126435 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 30 components and 0.126435 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062128Jy  sigma=1.441546
! Fit after  self-cal, rms=0.062130Jy  sigma=1.441430
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.114 x 1.264 at 3.382 degrees (North through East)
! Clean map  min=-0.0025386  max=0.1099 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.07     KP        0.98     
!   LA        0.96     MK        0.97     NL        1.06     OV        0.95     
!   PT        1.12     SC        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.04     KP        1.00     
!   LA        0.99     MK        1.01     NL        1.05     OV        1.00     
!   PT        1.12     SC        1.11     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.05     KP        1.03     
!   LA        1.01     MK        1.04     NL        1.05     OV        1.02     
!   PT        1.15     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.05     KP        0.95     
!   LA        0.95     MK        0.99     NL        1.04     OV        0.96     
!   PT        1.13     SC        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.03     KP        0.98     
!   LA        0.92     MK        0.99     NL        1.01     OV        0.97     
!   PT        1.12     SC        1.05     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.06     KP        1.00     
!   LA        0.96     MK        1.03     NL        1.04     OV        0.97     
!   PT        1.13     SC        1.11     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.06     KP        1.01     
!   LA        0.96     MK        1.05     NL        1.05     OV        0.97     
!   PT        1.16     SC        1.10     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.94     HN        0.99     KP        0.97     
!   LA        0.97     MK        1.01     NL        1.03     OV        0.95     
!   PT        1.10     SC        1.11     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        0.97     KP        0.99     
!   LA        0.95     MK        1.01     NL        1.05     OV        0.93     
!   PT        1.10     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.96     HN        0.95     KP        0.98     
!   LA        0.91     MK        0.97     NL        0.99     OV        0.93     
!   PT        1.07     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.91     HN        1.04     KP        0.94     
!   LA        0.91     MK        0.99     NL        1.03     OV        0.94     
!   PT        1.05     SC        1.06     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.92     HN        0.92     KP        0.97     
!   LA        0.90     MK        0.92     NL        1.00     OV        0.90     
!   PT        1.02     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.062130Jy  sigma=1.441430
! Fit after  self-cal, rms=0.061877Jy  sigma=1.420724
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.123 mas, bmaj=1.271 mas, bpa=2.008 degrees
! Estimated noise=0.18999 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000213153 Jy
! Component: 100  -  total flux cleaned = 0.000199436 Jy
! Component: 150  -  total flux cleaned = 0.000199123 Jy
! Component: 200  -  total flux cleaned = 0.000179387 Jy
! Total flux subtracted in 200 components = 0.000179387 Jy
! Clean residual min=-0.002167 max=0.002210 Jy/beam
! Clean residual mean=-0.000015 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.126615 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 34 components and 0.126615 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061873Jy  sigma=1.420562
! Fit after  self-cal, rms=0.061920Jy  sigma=1.420329
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061920Jy  sigma=1.420329
! Fit after  self-cal, rms=0.061713Jy  sigma=1.408973
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.124 mas, bmaj=1.27 mas, bpa=1.445 degrees
! Estimated noise=0.189128 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000607421 Jy
! Component: 100  -  total flux cleaned = -0.000721544 Jy
! Component: 150  -  total flux cleaned = -0.000802408 Jy
! Component: 200  -  total flux cleaned = -0.000851502 Jy
! Total flux subtracted in 200 components = -0.000851502 Jy
! Clean residual min=-0.001347 max=0.001325 Jy/beam
! Clean residual mean=-0.000004 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.125763 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 38 components and 0.125763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061704Jy  sigma=1.408713
! Fit after  self-cal, rms=0.061720Jy  sigma=1.408554
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.4, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00043928 Jy
! Component: 100  -  total flux cleaned = 0.000597181 Jy
! Component: 150  -  total flux cleaned = 0.000554302 Jy
! Component: 200  -  total flux cleaned = 0.000498184 Jy
! Total flux subtracted in 200 components = 0.000498184 Jy
! Clean residual min=-0.001338 max=0.001249 Jy/beam
! Clean residual mean=-0.000004 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.126261 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 50 components and 0.126261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061682Jy  sigma=1.407835
! Fit after  self-cal, rms=0.061681Jy  sigma=1.407754
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061681Jy  sigma=1.407754
! Fit after  self-cal, rms=0.061545Jy  sigma=1.406940
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.126 mas, bmaj=1.27 mas, bpa=0.1776 degrees
! Estimated noise=0.188635 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00013643 Jy
! Component: 100  -  total flux cleaned = 5.51046e-05 Jy
! Component: 150  -  total flux cleaned = -3.0369e-05 Jy
! Component: 200  -  total flux cleaned = -9.01353e-05 Jy
! Total flux subtracted in 200 components = -9.01353e-05 Jy
! Clean residual min=-0.001272 max=0.001230 Jy/beam
! Clean residual mean=-0.000003 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.126171 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 57 components and 0.126171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061531Jy  sigma=1.406672
! Fit after  self-cal, rms=0.061533Jy  sigma=1.406636
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.54447e-06 Jy
! Component: 100  -  total flux cleaned = -2.26956e-05 Jy
! Component: 150  -  total flux cleaned = -4.75826e-05 Jy
! Component: 200  -  total flux cleaned = -7.04966e-05 Jy
! Total flux subtracted in 200 components = -7.04966e-05 Jy
! Clean residual min=-0.001274 max=0.001231 Jy/beam
! Clean residual mean=-0.000003 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.126101 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 64 components and 0.126101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061527Jy  sigma=1.406531
! Fit after  self-cal, rms=0.061527Jy  sigma=1.406517
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061527Jy  sigma=1.406517
! Fit after  self-cal, rms=0.061376Jy  sigma=1.406461
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.363 mas, bmaj=2.378 mas, bpa=35.4 degrees
! Estimated noise=0.230019 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000355727 Jy
! Component: 100  -  total flux cleaned = -0.000380294 Jy
! Component: 150  -  total flux cleaned = -0.000397251 Jy
! Component: 200  -  total flux cleaned = -0.000420507 Jy
! Total flux subtracted in 200 components = -0.000420507 Jy
! Clean residual min=-0.001201 max=0.001463 Jy/beam
! Clean residual mean=-0.000007 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.12568 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 73 components and 0.12568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061373Jy  sigma=1.406414
! Fit after  self-cal, rms=0.061372Jy  sigma=1.406365
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-21.2, 43.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104733 Jy
! Component: 100  -  total flux cleaned = 0.00132412 Jy
! Component: 150  -  total flux cleaned = 0.00129251 Jy
! Component: 200  -  total flux cleaned = 0.00122797 Jy
! Total flux subtracted in 200 components = 0.00122797 Jy
! Clean residual min=-0.001120 max=0.001250 Jy/beam
! Clean residual mean=-0.000007 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.126908 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 105 components and 0.126908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061353Jy  sigma=1.405829
! Fit after  self-cal, rms=0.061350Jy  sigma=1.405782
! Inverting map 
! Added new window around map position (9, -6.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000948063 Jy
! Component: 100  -  total flux cleaned = 0.00119715 Jy
! Component: 150  -  total flux cleaned = 0.00146835 Jy
! Component: 200  -  total flux cleaned = 0.00160506 Jy
! Total flux subtracted in 200 components = 0.00160506 Jy
! Clean residual min=-0.000944 max=0.000998 Jy/beam
! Clean residual mean=-0.000004 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.128513 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 130 components and 0.128513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061335Jy  sigma=1.405386
! Fit after  self-cal, rms=0.061335Jy  sigma=1.405373
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.127 mas, bmaj=1.271 mas, bpa=-0.3462 degrees
! Estimated noise=0.188241 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.127 x 1.271 at -0.3462 degrees (North through East)
! Clean map  min=-0.0011398  max=0.10941 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8439 mas, bmaj=0.954 mas, bpa=-9.202 degrees
! Estimated noise=0.392593 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.082099 Jy
! Component: 100  -  total flux cleaned = 0.103114 Jy
! Component: 150  -  total flux cleaned = 0.112168 Jy
! Component: 200  -  total flux cleaned = 0.116956 Jy
! Total flux subtracted in 200 components = 0.116956 Jy
! Clean residual min=-0.003432 max=0.002852 Jy/beam
! Clean residual mean=-0.000001 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.116956 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.116956 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.127 mas, bmaj=1.271 mas, bpa=-0.3462 degrees
! Estimated noise=0.188241 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00407351 Jy
! Component: 100  -  total flux cleaned = 0.00632275 Jy
! Component: 150  -  total flux cleaned = 0.00766904 Jy
! Component: 200  -  total flux cleaned = 0.00852059 Jy
! Total flux subtracted in 200 components = 0.00852059 Jy
! Clean residual min=-0.001269 max=0.001052 Jy/beam
! Clean residual mean=-0.000003 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.125477 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 43 components and 0.125477 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.363 mas, bmaj=2.378 mas, bpa=35.4 degrees
! Estimated noise=0.230019 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00137172 Jy
! Component: 100  -  total flux cleaned = 0.00225951 Jy
! Component: 150  -  total flux cleaned = 0.00253879 Jy
! Component: 200  -  total flux cleaned = 0.00267512 Jy
! Total flux subtracted in 200 components = 0.00267512 Jy
! Clean residual min=-0.000974 max=0.001018 Jy/beam
! Clean residual mean=-0.000005 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.128152 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.26956e-05 Jy
! Component: 100  -  total flux cleaned = 0.000158597 Jy
! Component: 150  -  total flux cleaned = 0.000217051 Jy
! Component: 200  -  total flux cleaned = 0.00025294 Jy
! Total flux subtracted in 200 components = 0.00025294 Jy
! Clean residual min=-0.000936 max=0.000969 Jy/beam
! Clean residual mean=-0.000005 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.128405 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 88 components and 0.128405 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.127 mas, bmaj=1.271 mas, bpa=-0.3462 degrees
! Estimated noise=0.188241 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.70042e-05 Jy
! Component: 100  -  total flux cleaned = 0.000125537 Jy
! Component: 150  -  total flux cleaned = 0.000149099 Jy
! Component: 200  -  total flux cleaned = 0.000103046 Jy
! Total flux subtracted in 200 components = 0.000103046 Jy
! Clean residual min=-0.001110 max=0.000954 Jy/beam
! Clean residual mean=-0.000002 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.128508 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 115 components and 0.128508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061335Jy  sigma=1.405342
! Fit after  self-cal, rms=0.061327Jy  sigma=1.405216
wmodel /J1312+4828_X_map.mod
! wmodel: Unable to open new model file: /J1312+4828_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1312+4828_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.127 x 1.271 at -0.3462 degrees (North through East)
! Clean map  min=-0.0010395  max=0.10933 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1312+4828_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.109331 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000227224 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.623496 0.623496 1.24699 2.49399 4.98797 9.97594 19.9519 39.9038 79.8075
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.109 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  481.157 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1312+4828_X_dfm.log closed on Thu May 19 20:20:50 2016