! Started logfile: /scr/pima/bg219b_uvs/J1311+1417_X_uvs.log on Thu Apr  7 01:55:13 2016
obs /scr/pima/bg219b_uvs/J1311+1417_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1311+1417_X_uva.fits
! AN table 1: 41 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.873171 visibilities/baseline/integration-bin.
! Found source: J1311+1417
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19332 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J1311+1417_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.010978Jy  sigma=25.766726
! Fit after  self-cal, rms=0.900557Jy  sigma=22.918520
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7653 mas, bmaj=1.686 mas, bpa=-2.999 degrees
! Estimated noise=0.406977 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0745283 Jy
! Component: 100  -  total flux cleaned = 0.0947576 Jy
! Total flux subtracted in 100 components = 0.0947576 Jy
! Clean residual min=-0.012463 max=0.036794 Jy/beam
! Clean residual mean=-0.000038 rms=0.003591 Jy/beam
! Combined flux in latest and established models = 0.0947576 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0947576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.088336Jy  sigma=2.236437
! Fit after  self-cal, rms=0.087337Jy  sigma=2.208977
! Inverting map 
! Added new window around map position (2.4, -3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.03373 Jy
! Component: 100  -  total flux cleaned = 0.0494038 Jy
! Total flux subtracted in 100 components = 0.0494038 Jy
! Clean residual min=-0.008861 max=0.017701 Jy/beam
! Clean residual mean=-0.000029 rms=0.002459 Jy/beam
! Combined flux in latest and established models = 0.144161 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 21 components and 0.144161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072616Jy  sigma=1.830472
! Fit after  self-cal, rms=0.068014Jy  sigma=1.701750
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0175878 Jy
! Component: 100  -  total flux cleaned = 0.0268294 Jy
! Total flux subtracted in 100 components = 0.0268294 Jy
! Clean residual min=-0.006200 max=0.011732 Jy/beam
! Clean residual mean=-0.000021 rms=0.001626 Jy/beam
! Combined flux in latest and established models = 0.170991 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 33 components and 0.170991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062206Jy  sigma=1.547255
! Fit after  self-cal, rms=0.061467Jy  sigma=1.524987
! Inverting map 
! Added new window around map position (1.6, 2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116371 Jy
! Component: 100  -  total flux cleaned = 0.0192332 Jy
! Total flux subtracted in 100 components = 0.0192332 Jy
! Clean residual min=-0.004741 max=0.005897 Jy/beam
! Clean residual mean=-0.000016 rms=0.001196 Jy/beam
! Combined flux in latest and established models = 0.190224 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 46 components and 0.190224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058442Jy  sigma=1.442011
! Fit after  self-cal, rms=0.058221Jy  sigma=1.436229
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.91 mas, bmaj=1.949 mas, bpa=-3.319 degrees
! Estimated noise=0.27161 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.4, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0109658 Jy
! Component: 100  -  total flux cleaned = 0.0187197 Jy
! Component: 150  -  total flux cleaned = 0.0246189 Jy
! Component: 200  -  total flux cleaned = 0.0292779 Jy
! Total flux subtracted in 200 components = 0.0292779 Jy
! Clean residual min=-0.003641 max=0.004730 Jy/beam
! Clean residual mean=-0.000018 rms=0.001054 Jy/beam
! Combined flux in latest and established models = 0.219502 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 73 components and 0.219502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055535Jy  sigma=1.361232
! Fit after  self-cal, rms=0.055413Jy  sigma=1.357347
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.91 x 1.949 at -3.319 degrees (North through East)
! Clean map  min=-0.003203  max=0.091438 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.04     KP        0.93     
!   LA        0.91     MK        0.99     NL        0.95     OV        0.95     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.02     KP        0.95     
!   LA        0.92     MK        1.10     NL        0.99     OV        0.99     
!   PT        1.02     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.02     KP        0.98     
!   LA        0.95     MK        1.09     NL        1.02     OV        0.98     
!   PT        1.01     SC        1.10     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.95     HN        0.99     KP        0.94     
!   LA        0.92     MK        1.02     NL        1.00     OV        0.98     
!   PT        0.98     SC        1.02     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        1.00     KP        0.95     
!   LA        0.93     MK        1.04     NL        1.02     OV        0.94     
!   PT        1.03     SC        1.10     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.96     HN        0.99     KP        0.97     
!   LA        0.95     MK        1.08     NL        0.98     OV        0.98     
!   PT        1.05     SC        1.06     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.01     KP        0.95     
!   LA        0.90     MK        1.07     NL        0.98     OV        0.97     
!   PT        1.02     SC        1.13     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055413Jy  sigma=1.357347
! Fit after  self-cal, rms=0.054665Jy  sigma=1.336472
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9337 mas, bmaj=1.988 mas, bpa=-3.499 degrees
! Estimated noise=0.26708 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167407 Jy
! Component: 100  -  total flux cleaned = 0.00223725 Jy
! Component: 150  -  total flux cleaned = 0.00262767 Jy
! Component: 200  -  total flux cleaned = 0.00296461 Jy
! Total flux subtracted in 200 components = 0.00296461 Jy
! Clean residual min=-0.003007 max=0.002844 Jy/beam
! Clean residual mean=-0.000008 rms=0.000760 Jy/beam
! Combined flux in latest and established models = 0.222466 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 87 components and 0.222466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054471Jy  sigma=1.330774
! Fit after  self-cal, rms=0.054489Jy  sigma=1.330160
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054489Jy  sigma=1.330160
! Fit after  self-cal, rms=0.053939Jy  sigma=1.319642
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9365 mas, bmaj=1.994 mas, bpa=-3.546 degrees
! Estimated noise=0.265096 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00217954 Jy
! Component: 100  -  total flux cleaned = -0.00285686 Jy
! Component: 150  -  total flux cleaned = -0.00313258 Jy
! Component: 200  -  total flux cleaned = -0.00330027 Jy
! Total flux subtracted in 200 components = -0.00330027 Jy
! Clean residual min=-0.002024 max=0.002557 Jy/beam
! Clean residual mean=-0.000003 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.219166 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 103 components and 0.219166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053835Jy  sigma=1.316865
! Fit after  self-cal, rms=0.053832Jy  sigma=1.316541
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 20).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00220446 Jy
! Component: 100  -  total flux cleaned = 0.00312138 Jy
! Component: 150  -  total flux cleaned = 0.00363161 Jy
! Component: 200  -  total flux cleaned = 0.00404397 Jy
! Total flux subtracted in 200 components = 0.00404397 Jy
! Clean residual min=-0.001768 max=0.002059 Jy/beam
! Clean residual mean=-0.000005 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.22321 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 117 components and 0.22321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053725Jy  sigma=1.313917
! Fit after  self-cal, rms=0.053723Jy  sigma=1.313758
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053723Jy  sigma=1.313758
! Fit after  self-cal, rms=0.053489Jy  sigma=1.311641
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9388 mas, bmaj=1.997 mas, bpa=-3.639 degrees
! Estimated noise=0.263668 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00109356 Jy
! Component: 100  -  total flux cleaned = -0.00135933 Jy
! Component: 150  -  total flux cleaned = -0.00130458 Jy
! Component: 200  -  total flux cleaned = -0.00127984 Jy
! Total flux subtracted in 200 components = -0.00127984 Jy
! Clean residual min=-0.001639 max=0.001859 Jy/beam
! Clean residual mean=-0.000004 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.22193 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 126 components and 0.22193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053448Jy  sigma=1.310660
! Fit after  self-cal, rms=0.053449Jy  sigma=1.310606
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.6, 23.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0016976 Jy
! Component: 100  -  total flux cleaned = 0.00245721 Jy
! Component: 150  -  total flux cleaned = 0.00257148 Jy
! Component: 200  -  total flux cleaned = 0.00257056 Jy
! Total flux subtracted in 200 components = 0.00257056 Jy
! Clean residual min=-0.001523 max=0.001625 Jy/beam
! Clean residual mean=-0.000005 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.224501 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 153 components and 0.224501 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053390Jy  sigma=1.308903
! Fit after  self-cal, rms=0.053386Jy  sigma=1.308798
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053386Jy  sigma=1.308798
! Fit after  self-cal, rms=0.053431Jy  sigma=1.305245
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.123 mas, bmaj=3.023 mas, bpa=-1.904 degrees
! Estimated noise=0.317802 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000524689 Jy
! Component: 100  -  total flux cleaned = -0.000582346 Jy
! Component: 150  -  total flux cleaned = -0.000582744 Jy
! Component: 200  -  total flux cleaned = -0.000583911 Jy
! Total flux subtracted in 200 components = -0.000583911 Jy
! Clean residual min=-0.001532 max=0.001796 Jy/beam
! Clean residual mean=-0.000008 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.223917 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 167 components and 0.223917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053422Jy  sigma=1.304905
! Fit after  self-cal, rms=0.053425Jy  sigma=1.304795
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000102403 Jy
! Component: 100  -  total flux cleaned = -0.000101285 Jy
! Component: 150  -  total flux cleaned = -0.000130397 Jy
! Component: 200  -  total flux cleaned = -0.000156488 Jy
! Total flux subtracted in 200 components = -0.000156488 Jy
! Clean residual min=-0.001435 max=0.001812 Jy/beam
! Clean residual mean=-0.000008 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.223761 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 177 components and 0.223761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053423Jy  sigma=1.304726
! Fit after  self-cal, rms=0.053423Jy  sigma=1.304701
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9398 mas, bmaj=2.001 mas, bpa=-3.717 degrees
! Estimated noise=0.263543 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9398 x 2.001 at -3.717 degrees (North through East)
! Clean map  min=-0.0013102  max=0.087428 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7839 mas, bmaj=1.719 mas, bpa=-3.362 degrees
! Estimated noise=0.40336 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0824827 Jy
! Component: 100  -  total flux cleaned = 0.118196 Jy
! Component: 150  -  total flux cleaned = 0.139204 Jy
! Component: 200  -  total flux cleaned = 0.154282 Jy
! Total flux subtracted in 200 components = 0.154282 Jy
! Clean residual min=-0.005705 max=0.009037 Jy/beam
! Clean residual mean=-0.000018 rms=0.001460 Jy/beam
! Combined flux in latest and established models = 0.154282 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.154282 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9398 mas, bmaj=2.001 mas, bpa=-3.717 degrees
! Estimated noise=0.263543 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0156333 Jy
! Component: 100  -  total flux cleaned = 0.0268464 Jy
! Component: 150  -  total flux cleaned = 0.0352582 Jy
! Component: 200  -  total flux cleaned = 0.0416499 Jy
! Total flux subtracted in 200 components = 0.0416499 Jy
! Clean residual min=-0.002768 max=0.003972 Jy/beam
! Clean residual mean=-0.000014 rms=0.000820 Jy/beam
! Combined flux in latest and established models = 0.195932 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 42 components and 0.195932 Jy
! Inverting map 
! Added new window around map position (0.8, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00494699 Jy
! Component: 100  -  total flux cleaned = 0.00879111 Jy
! Component: 150  -  total flux cleaned = 0.0119065 Jy
! Component: 200  -  total flux cleaned = 0.0145148 Jy
! Total flux subtracted in 200 components = 0.0145148 Jy
! Clean residual min=-0.002026 max=0.002169 Jy/beam
! Clean residual mean=-0.000007 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.210446 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 72 components and 0.210446 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.123 mas, bmaj=3.023 mas, bpa=-1.904 degrees
! Estimated noise=0.317802 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00322741 Jy
! Component: 100  -  total flux cleaned = 0.00552211 Jy
! Component: 150  -  total flux cleaned = 0.00728581 Jy
! Component: 200  -  total flux cleaned = 0.0087056 Jy
! Total flux subtracted in 200 components = 0.0087056 Jy
! Clean residual min=-0.001756 max=0.002047 Jy/beam
! Clean residual mean=-0.000010 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.219152 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116296 Jy
! Component: 100  -  total flux cleaned = 0.00209172 Jy
! Component: 150  -  total flux cleaned = 0.00271381 Jy
! Component: 200  -  total flux cleaned = 0.00314231 Jy
! Total flux subtracted in 200 components = 0.00314231 Jy
! Clean residual min=-0.001577 max=0.001810 Jy/beam
! Clean residual mean=-0.000009 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.222294 Jy
! Adding 78 model components to the UV plane model.
! The established model now contains 133 components and 0.222294 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9398 mas, bmaj=2.001 mas, bpa=-3.717 degrees
! Estimated noise=0.263543 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000387092 Jy
! Component: 100  -  total flux cleaned = 0.000686445 Jy
! Component: 150  -  total flux cleaned = 0.000911735 Jy
! Component: 200  -  total flux cleaned = 0.0010806 Jy
! Total flux subtracted in 200 components = 0.0010806 Jy
! Clean residual min=-0.001482 max=0.001623 Jy/beam
! Clean residual mean=-0.000004 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.223375 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 150 components and 0.223375 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053483Jy  sigma=1.305911
! Fit after  self-cal, rms=0.053458Jy  sigma=1.305445
wmodel /scr/pima/bg219b_uvs/J1311+1417_X_map.mod
! Writing 150 model components to file: /scr/pima/bg219b_uvs/J1311+1417_X_map.mod
wobs /scr/pima/bg219b_uvs/J1311+1417_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J1311+1417_X_uvs.fits
wwins /scr/pima/bg219b_uvs/J1311+1417_X_map.win
! wwins: Wrote 7 windows to /scr/pima/bg219b_uvs/J1311+1417_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -1.88511e-05 Jy
! Component: 100  -  total flux cleaned = -0.000121104 Jy
! Component: 150  -  total flux cleaned = -0.000364369 Jy
! Component: 200  -  total flux cleaned = -0.000597978 Jy
! Component: 250  -  total flux cleaned = -0.00077787 Jy
! Component: 300  -  total flux cleaned = -0.000951789 Jy
! Component: 350  -  total flux cleaned = -0.00107922 Jy
! Component: 400  -  total flux cleaned = -0.00128595 Jy
! Component: 450  -  total flux cleaned = -0.00138731 Jy
! Component: 500  -  total flux cleaned = -0.00154611 Jy
! Component: 550  -  total flux cleaned = -0.00170111 Jy
! Component: 600  -  total flux cleaned = -0.0018148 Jy
! Component: 650  -  total flux cleaned = -0.0019269 Jy
! Component: 700  -  total flux cleaned = -0.00209184 Jy
! Component: 750  -  total flux cleaned = -0.00218216 Jy
! Component: 800  -  total flux cleaned = -0.00227095 Jy
! Component: 850  -  total flux cleaned = -0.00237593 Jy
! Component: 900  -  total flux cleaned = -0.00242787 Jy
! Component: 950  -  total flux cleaned = -0.00258046 Jy
! Component: 1000  -  total flux cleaned = -0.00264721 Jy
! Component: 1050  -  total flux cleaned = -0.00277903 Jy
! Component: 1100  -  total flux cleaned = -0.00289263 Jy
! Component: 1150  -  total flux cleaned = -0.00300463 Jy
! Component: 1200  -  total flux cleaned = -0.00311561 Jy
! Component: 1250  -  total flux cleaned = -0.00327183 Jy
! Component: 1300  -  total flux cleaned = -0.0033798 Jy
! Component: 1350  -  total flux cleaned = -0.00347124 Jy
! Component: 1400  -  total flux cleaned = -0.00357667 Jy
! Component: 1450  -  total flux cleaned = -0.00368059 Jy
! Component: 1500  -  total flux cleaned = -0.00382757 Jy
! Component: 1550  -  total flux cleaned = -0.00391474 Jy
! Component: 1600  -  total flux cleaned = -0.00407257 Jy
! Component: 1650  -  total flux cleaned = -0.00414346 Jy
! Component: 1700  -  total flux cleaned = -0.00426988 Jy
! Component: 1750  -  total flux cleaned = -0.00433937 Jy
! Component: 1800  -  total flux cleaned = -0.00447693 Jy
! Component: 1850  -  total flux cleaned = -0.00454493 Jy
! Component: 1900  -  total flux cleaned = -0.00465266 Jy
! Component: 1950  -  total flux cleaned = -0.00469234 Jy
! Component: 2000  -  total flux cleaned = -0.00469249 Jy
! Component: 2050  -  total flux cleaned = -0.00477075 Jy
! Component: 2100  -  total flux cleaned = -0.00479668 Jy
! Component: 2150  -  total flux cleaned = -0.00487358 Jy
! Component: 2200  -  total flux cleaned = -0.00488625 Jy
! Component: 2250  -  total flux cleaned = -0.0049617 Jy
! Component: 2300  -  total flux cleaned = -0.00501164 Jy
! Component: 2350  -  total flux cleaned = -0.00507322 Jy
! Component: 2400  -  total flux cleaned = -0.00509771 Jy
! Component: 2450  -  total flux cleaned = -0.00515835 Jy
! Component: 2500  -  total flux cleaned = -0.00523058 Jy
! Component: 2550  -  total flux cleaned = -0.0052665 Jy
! Component: 2600  -  total flux cleaned = -0.00532579 Jy
! Component: 2650  -  total flux cleaned = -0.00534933 Jy
! Component: 2700  -  total flux cleaned = -0.00543063 Jy
! Component: 2750  -  total flux cleaned = -0.00546499 Jy
! Component: 2800  -  total flux cleaned = -0.00548786 Jy
! Component: 2850  -  total flux cleaned = -0.00555604 Jy
! Component: 2900  -  total flux cleaned = -0.00561242 Jy
! Component: 2950  -  total flux cleaned = -0.00564604 Jy
! Component: 3000  -  total flux cleaned = -0.00572386 Jy
! Component: 3050  -  total flux cleaned = -0.00580097 Jy
! Component: 3100  -  total flux cleaned = -0.00586664 Jy
! Component: 3150  -  total flux cleaned = -0.00592103 Jy
! Component: 3200  -  total flux cleaned = -0.00599661 Jy
! Component: 3250  -  total flux cleaned = -0.00606073 Jy
! Component: 3300  -  total flux cleaned = -0.00609278 Jy
! Component: 3350  -  total flux cleaned = -0.00614581 Jy
! Component: 3400  -  total flux cleaned = -0.0062193 Jy
! Component: 3450  -  total flux cleaned = -0.00627144 Jy
! Component: 3500  -  total flux cleaned = -0.00636478 Jy
! Component: 3550  -  total flux cleaned = -0.00642652 Jy
! Component: 3600  -  total flux cleaned = -0.0064675 Jy
! Component: 3650  -  total flux cleaned = -0.00653871 Jy
! Component: 3700  -  total flux cleaned = -0.00663985 Jy
! Component: 3750  -  total flux cleaned = -0.00669 Jy
! Component: 3800  -  total flux cleaned = -0.00673997 Jy
! Component: 3850  -  total flux cleaned = -0.00679952 Jy
! Component: 3900  -  total flux cleaned = -0.00682914 Jy
! Component: 3950  -  total flux cleaned = -0.00688806 Jy
! Component: 4000  -  total flux cleaned = -0.00690755 Jy
! Component: 4050  -  total flux cleaned = -0.00698507 Jy
! Total flux subtracted in 4096 components = -0.00703328 Jy
! Clean residual min=-0.000670 max=0.000545 Jy/beam
! Clean residual mean=-0.000001 rms=0.000166 Jy/beam
! Combined flux in latest and established models = 0.216342 Jy
keep
! Adding 297 model components to the UV plane model.
! The established model now contains 447 components and 0.216342 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J1311+1417_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9398 x 2.001 at -3.717 degrees (North through East)
! Clean map  min=-0.0010964  max=0.08682 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1311+1417_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0868201 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000162143 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.560273 0.560273 1.12055 2.24109 4.48218 8.96437 17.9287 35.8575 71.7149
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.086 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  535.453 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1311+1417_X_uvs.log closed on Thu Apr  7 01:55:19 2016