! Started logfile: /scr/pima/bg219b_uvs/J1310+4653_S_uvs.log on Thu Apr 7 01:23:49 2016 obs /scr/pima/bg219b_uvs/J1310+4653_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219b_uvs/J1310+4653_S_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.856349 visibilities/baseline/integration-bin. ! Found source: J1310+4653 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 8632 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J1310+4653_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.021506Jy sigma=24.045205 ! Fit after self-cal, rms=0.756197Jy sigma=17.816433 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.332 mas, bmaj=4.532 mas, bpa=-40.03 degrees ! Estimated noise=0.520603 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.192647 Jy ! Component: 100 - total flux cleaned = 0.234656 Jy ! Total flux subtracted in 100 components = 0.234656 Jy ! Clean residual min=-0.004583 max=0.011718 Jy/beam ! Clean residual mean=0.000027 rms=0.001506 Jy/beam ! Combined flux in latest and established models = 0.234656 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.234656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062785Jy sigma=1.403671 ! Fit after self-cal, rms=0.062781Jy sigma=1.403604 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00998807 Jy ! Component: 100 - total flux cleaned = 0.0135845 Jy ! Total flux subtracted in 100 components = 0.0135845 Jy ! Clean residual min=-0.004565 max=0.005914 Jy/beam ! Clean residual mean=0.000027 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.248241 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.248241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061585Jy sigma=1.377842 ! Fit after self-cal, rms=0.061585Jy sigma=1.377813 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.171 mas, bmaj=5.486 mas, bpa=-38.51 degrees ! Estimated noise=0.3302 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000569664 Jy ! Component: 100 - total flux cleaned = -0.000809715 Jy ! Component: 150 - total flux cleaned = -0.00100696 Jy ! Component: 200 - total flux cleaned = -0.00116973 Jy ! Total flux subtracted in 200 components = -0.00116973 Jy ! Clean residual min=-0.004284 max=0.006492 Jy/beam ! Clean residual mean=0.000064 rms=0.001490 Jy/beam ! Combined flux in latest and established models = 0.247071 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 14 components and 0.247071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061565Jy sigma=1.377130 ! Fit after self-cal, rms=0.061563Jy sigma=1.377092 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.171 x 5.486 at -38.51 degrees (North through East) ! Clean map min=-0.0041977 max=0.24582 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.99 KP 0.98 ! LA 0.97 MK 1.01 NL 0.99 OV 0.99 ! PT 1.13 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.00 KP 0.98 ! LA 0.96 MK 1.00 NL 0.97 OV 1.00 ! PT 1.14 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 0.98 KP 0.98 ! LA 0.92 MK 1.01 NL 1.01 OV 0.96 ! PT 1.09 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.00 KP 0.99 ! LA 0.94 MK 1.00 NL 1.00 OV 0.98 ! PT 1.06 SC 0.99 ! ! ! Fit before self-cal, rms=0.061563Jy sigma=1.377092 ! Fit after self-cal, rms=0.060037Jy sigma=1.336586 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.177 mas, bmaj=5.473 mas, bpa=-38.49 degrees ! Estimated noise=0.329818 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000193891 Jy ! Component: 100 - total flux cleaned = 0.000251746 Jy ! Component: 150 - total flux cleaned = 0.000301417 Jy ! Component: 200 - total flux cleaned = 0.000345129 Jy ! Total flux subtracted in 200 components = 0.000345129 Jy ! Clean residual min=-0.004835 max=0.004815 Jy/beam ! Clean residual mean=0.000062 rms=0.001187 Jy/beam ! Combined flux in latest and established models = 0.247416 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.247416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060027Jy sigma=1.336322 ! Fit after self-cal, rms=0.060031Jy sigma=1.336174 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060031Jy sigma=1.336174 ! Fit after self-cal, rms=0.058210Jy sigma=1.281362 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.182 mas, bmaj=5.477 mas, bpa=-38.65 degrees ! Estimated noise=0.33004 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000440184 Jy ! Component: 100 - total flux cleaned = 0.000506017 Jy ! Component: 150 - total flux cleaned = 0.000539586 Jy ! Component: 200 - total flux cleaned = 0.000567504 Jy ! Total flux subtracted in 200 components = 0.000567504 Jy ! Clean residual min=-0.001640 max=0.001795 Jy/beam ! Clean residual mean=0.000010 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.247984 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.247984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058194Jy sigma=1.281043 ! Fit after self-cal, rms=0.058216Jy sigma=1.280884 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.03974e-05 Jy ! Component: 100 - total flux cleaned = 7.01788e-05 Jy ! Component: 150 - total flux cleaned = 7.94933e-05 Jy ! Component: 200 - total flux cleaned = 0.000105107 Jy ! Total flux subtracted in 200 components = 0.000105107 Jy ! Clean residual min=-0.001627 max=0.001790 Jy/beam ! Clean residual mean=0.000010 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.248089 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.248089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058211Jy sigma=1.280799 ! Fit after self-cal, rms=0.058211Jy sigma=1.280788 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058211Jy sigma=1.280788 ! Fit after self-cal, rms=0.058166Jy sigma=1.280708 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.181 mas, bmaj=5.477 mas, bpa=-38.74 degrees ! Estimated noise=0.329969 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164279 Jy ! Component: 100 - total flux cleaned = 0.000208784 Jy ! Component: 150 - total flux cleaned = 0.000237274 Jy ! Component: 200 - total flux cleaned = 0.000263158 Jy ! Total flux subtracted in 200 components = 0.000263158 Jy ! Clean residual min=-0.001613 max=0.001738 Jy/beam ! Clean residual mean=0.000010 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.248352 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 38 components and 0.248352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058162Jy sigma=1.280617 ! Fit after self-cal, rms=0.058161Jy sigma=1.280608 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.94336e-05 Jy ! Component: 100 - total flux cleaned = 8.17979e-05 Jy ! Component: 150 - total flux cleaned = 0.00010111 Jy ! Component: 200 - total flux cleaned = 0.000112434 Jy ! Total flux subtracted in 200 components = 0.000112434 Jy ! Clean residual min=-0.001603 max=0.001729 Jy/beam ! Clean residual mean=0.000010 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.248464 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 0.248464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058159Jy sigma=1.280571 ! Fit after self-cal, rms=0.058159Jy sigma=1.280563 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058159Jy sigma=1.280563 ! Fit after self-cal, rms=0.058134Jy sigma=1.280537 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.386 mas, bmaj=8.981 mas, bpa=-46.1 degrees ! Estimated noise=0.397081 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320464 Jy ! Component: 100 - total flux cleaned = 0.00029521 Jy ! Component: 150 - total flux cleaned = 0.000261081 Jy ! Component: 200 - total flux cleaned = 0.000244662 Jy ! Total flux subtracted in 200 components = 0.000244662 Jy ! Clean residual min=-0.001662 max=0.002040 Jy/beam ! Clean residual mean=0.000020 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.248709 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.248709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058134Jy sigma=1.280544 ! Fit after self-cal, rms=0.058132Jy sigma=1.280506 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.90266e-09 Jy ! Component: 100 - total flux cleaned = -5.22764e-06 Jy ! Component: 150 - total flux cleaned = -1.86596e-05 Jy ! Component: 200 - total flux cleaned = -2.62854e-05 Jy ! Total flux subtracted in 200 components = -2.62854e-05 Jy ! Clean residual min=-0.001654 max=0.002028 Jy/beam ! Clean residual mean=0.000020 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.248683 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 49 components and 0.248683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058133Jy sigma=1.280525 ! Fit after self-cal, rms=0.058132Jy sigma=1.280502 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.181 mas, bmaj=5.475 mas, bpa=-38.78 degrees ! Estimated noise=0.329916 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.181 x 5.475 at -38.78 degrees (North through East) ! Clean map min=-0.0015206 max=0.24492 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=4.512 mas, bpa=-40.12 degrees ! Estimated noise=0.51828 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.191776 Jy ! Component: 100 - total flux cleaned = 0.233596 Jy ! Component: 150 - total flux cleaned = 0.243307 Jy ! Component: 200 - total flux cleaned = 0.246852 Jy ! Total flux subtracted in 200 components = 0.246852 Jy ! Clean residual min=-0.003186 max=0.002925 Jy/beam ! Clean residual mean=0.000005 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.246852 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.246852 Jy ! Inverting map and beam ! Estimated beam: bmin=4.181 mas, bmaj=5.475 mas, bpa=-38.78 degrees ! Estimated noise=0.329916 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169526 Jy ! Component: 100 - total flux cleaned = 0.00223473 Jy ! Component: 150 - total flux cleaned = 0.00226346 Jy ! Component: 200 - total flux cleaned = 0.00228679 Jy ! Total flux subtracted in 200 components = 0.00228679 Jy ! Clean residual min=-0.001618 max=0.001745 Jy/beam ! Clean residual mean=0.000010 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.249139 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 24 components and 0.249139 Jy ! Inverting map ! Added new window around map position (-58.5, -96.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164812 Jy ! Component: 100 - total flux cleaned = 0.00257154 Jy ! Component: 150 - total flux cleaned = 0.00300557 Jy ! Component: 200 - total flux cleaned = 0.00326203 Jy ! Total flux subtracted in 200 components = 0.00326203 Jy ! Clean residual min=-0.001469 max=0.001376 Jy/beam ! Clean residual mean=0.000009 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.252401 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 48 components and 0.252401 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.386 mas, bmaj=8.981 mas, bpa=-46.1 degrees ! Estimated noise=0.397081 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000696952 Jy ! Component: 100 - total flux cleaned = 0.000908046 Jy ! Component: 150 - total flux cleaned = 0.00107015 Jy ! Component: 200 - total flux cleaned = 0.00112668 Jy ! Total flux subtracted in 200 components = 0.00112668 Jy ! Clean residual min=-0.001425 max=0.001295 Jy/beam ! Clean residual mean=0.000016 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.253528 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.67351e-05 Jy ! Component: 100 - total flux cleaned = 0.000133451 Jy ! Component: 150 - total flux cleaned = 0.000185257 Jy ! Component: 200 - total flux cleaned = 0.00023255 Jy ! Total flux subtracted in 200 components = 0.00023255 Jy ! Clean residual min=-0.001410 max=0.001297 Jy/beam ! Clean residual mean=0.000015 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.25376 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 71 components and 0.25376 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.181 mas, bmaj=5.475 mas, bpa=-38.78 degrees ! Estimated noise=0.329916 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.79465e-06 Jy ! Component: 100 - total flux cleaned = -2.8222e-05 Jy ! Component: 150 - total flux cleaned = -9.86387e-06 Jy ! Component: 200 - total flux cleaned = 2.30425e-05 Jy ! Total flux subtracted in 200 components = 2.30425e-05 Jy ! Clean residual min=-0.001474 max=0.001338 Jy/beam ! Clean residual mean=0.000008 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.253783 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 84 components and 0.253783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058047Jy sigma=1.278328 ! Fit after self-cal, rms=0.058040Jy sigma=1.278202 wmodel /scr/pima/bg219b_uvs/J1310+4653_S_map.mod ! Writing 84 model components to file: /scr/pima/bg219b_uvs/J1310+4653_S_map.mod wobs /scr/pima/bg219b_uvs/J1310+4653_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219b_uvs/J1310+4653_S_uvs.fits wwins /scr/pima/bg219b_uvs/J1310+4653_S_map.win ! wwins: Wrote 3 windows to /scr/pima/bg219b_uvs/J1310+4653_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00046933 Jy ! Component: 100 - total flux cleaned = -0.000669984 Jy ! Component: 150 - total flux cleaned = -0.00074227 Jy ! Component: 200 - total flux cleaned = -0.000742896 Jy ! Component: 250 - total flux cleaned = -0.000765769 Jy ! Component: 300 - total flux cleaned = -0.000743904 Jy ! Component: 350 - total flux cleaned = -0.000786463 Jy ! Component: 400 - total flux cleaned = -0.000848912 Jy ! Component: 450 - total flux cleaned = -0.000909902 Jy ! Component: 500 - total flux cleaned = -0.000989703 Jy ! Component: 550 - total flux cleaned = -0.00104866 Jy ! Component: 600 - total flux cleaned = -0.00116372 Jy ! Component: 650 - total flux cleaned = -0.00118233 Jy ! Component: 700 - total flux cleaned = -0.00123821 Jy ! Component: 750 - total flux cleaned = -0.00129304 Jy ! Component: 800 - total flux cleaned = -0.00131089 Jy ! Component: 850 - total flux cleaned = -0.00127578 Jy ! Component: 900 - total flux cleaned = -0.00129321 Jy ! Component: 950 - total flux cleaned = -0.00119029 Jy ! Component: 1000 - total flux cleaned = -0.00117343 Jy ! Component: 1050 - total flux cleaned = -0.0011735 Jy ! Component: 1100 - total flux cleaned = -0.00110742 Jy ! Component: 1150 - total flux cleaned = -0.00110725 Jy ! Component: 1200 - total flux cleaned = -0.00105914 Jy ! Component: 1250 - total flux cleaned = -0.00104342 Jy ! Component: 1300 - total flux cleaned = -0.000996537 Jy ! Component: 1350 - total flux cleaned = -0.000919533 Jy ! Component: 1400 - total flux cleaned = -0.000889236 Jy ! Component: 1450 - total flux cleaned = -0.000844175 Jy ! Component: 1500 - total flux cleaned = -0.000799413 Jy ! Component: 1550 - total flux cleaned = -0.000711355 Jy ! Component: 1600 - total flux cleaned = -0.000667797 Jy ! Component: 1650 - total flux cleaned = -0.000653112 Jy ! Component: 1700 - total flux cleaned = -0.000582001 Jy ! Component: 1750 - total flux cleaned = -0.000567765 Jy ! Component: 1800 - total flux cleaned = -0.000498126 Jy ! Component: 1850 - total flux cleaned = -0.000415261 Jy ! Component: 1900 - total flux cleaned = -0.000374283 Jy ! Component: 1950 - total flux cleaned = -0.000306933 Jy ! Component: 2000 - total flux cleaned = -0.000213254 Jy ! Component: 2050 - total flux cleaned = -0.000173654 Jy ! Component: 2100 - total flux cleaned = -0.000121454 Jy ! Component: 2150 - total flux cleaned = -4.35217e-05 Jy ! Component: 2200 - total flux cleaned = 4.64994e-05 Jy ! Component: 2250 - total flux cleaned = 7.19714e-05 Jy ! Component: 2300 - total flux cleaned = 0.00016023 Jy ! Component: 2350 - total flux cleaned = 0.000235141 Jy ! Component: 2400 - total flux cleaned = 0.000333841 Jy ! Component: 2450 - total flux cleaned = 0.000370676 Jy ! Component: 2500 - total flux cleaned = 0.000479915 Jy ! Component: 2550 - total flux cleaned = 0.000516008 Jy ! Component: 2600 - total flux cleaned = 0.000575401 Jy ! Component: 2650 - total flux cleaned = 0.000599021 Jy ! Component: 2700 - total flux cleaned = 0.000716163 Jy ! Component: 2750 - total flux cleaned = 0.000704476 Jy ! Component: 2800 - total flux cleaned = 0.000773529 Jy ! Component: 2850 - total flux cleaned = 0.000785091 Jy ! Component: 2900 - total flux cleaned = 0.000853119 Jy ! Component: 2950 - total flux cleaned = 0.000931912 Jy ! Component: 3000 - total flux cleaned = 0.000943224 Jy ! Component: 3050 - total flux cleaned = 0.00100952 Jy ! Component: 3100 - total flux cleaned = 0.00107533 Jy ! Component: 3150 - total flux cleaned = 0.00108612 Jy ! Component: 3200 - total flux cleaned = 0.00115103 Jy ! Component: 3250 - total flux cleaned = 0.00122623 Jy ! Component: 3300 - total flux cleaned = 0.00125817 Jy ! Component: 3350 - total flux cleaned = 0.00130034 Jy ! Component: 3400 - total flux cleaned = 0.00135292 Jy ! Component: 3450 - total flux cleaned = 0.00145705 Jy ! Component: 3500 - total flux cleaned = 0.00149829 Jy ! Component: 3550 - total flux cleaned = 0.00155976 Jy ! Component: 3600 - total flux cleaned = 0.00162083 Jy ! Component: 3650 - total flux cleaned = 0.00167137 Jy ! Component: 3700 - total flux cleaned = 0.00177189 Jy ! Component: 3750 - total flux cleaned = 0.00183185 Jy ! Component: 3800 - total flux cleaned = 0.00189135 Jy ! Component: 3850 - total flux cleaned = 0.00194056 Jy ! Component: 3900 - total flux cleaned = 0.00201886 Jy ! Component: 3950 - total flux cleaned = 0.00203838 Jy ! Component: 4000 - total flux cleaned = 0.00213482 Jy ! Component: 4050 - total flux cleaned = 0.00217327 Jy ! Total flux subtracted in 4096 components = 0.00224953 Jy ! Clean residual min=-0.000620 max=0.000476 Jy/beam ! Clean residual mean=0.000003 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.256033 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 349 components and 0.256033 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219b_uvs/J1310+4653_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.181 x 5.475 at -38.78 degrees (North through East) ! Clean map min=-0.0011366 max=0.24472 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1310+4653_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.244724 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00017023 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.20868 0.20868 0.41736 0.83472 1.66944 3.33888 6.67776 13.3555 26.7111 53.4221 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.244 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1437.61 quit ! Quitting program ! Log file /scr/pima/bg219b_uvs/J1310+4653_S_uvs.log closed on Thu Apr 7 01:23:54 2016