! Started logfile: /scr/pima/bg219b_uvs/J1302+4819_X_dfm.log on Thu May 19 20:20:08 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1302+4819_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1302+4819_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.911728 visibilities/baseline/integration-bin.
! Found source: J1302+4819
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17724 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1302+4819_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.017390Jy  sigma=23.735794
! Fit after  self-cal, rms=0.800314Jy  sigma=18.584527
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.874 mas, bmaj=0.9847 mas, bpa=-13.34 degrees
! Estimated noise=0.501464 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.153562 Jy
! Component: 100  -  total flux cleaned = 0.189686 Jy
! Total flux subtracted in 100 components = 0.189686 Jy
! Clean residual min=-0.007282 max=0.014085 Jy/beam
! Clean residual mean=-0.000004 rms=0.001606 Jy/beam
! Combined flux in latest and established models = 0.189686 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.189686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071648Jy  sigma=1.593622
! Fit after  self-cal, rms=0.071543Jy  sigma=1.591440
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153449 Jy
! Component: 100  -  total flux cleaned = 0.0234936 Jy
! Total flux subtracted in 100 components = 0.0234936 Jy
! Clean residual min=-0.005460 max=0.005561 Jy/beam
! Clean residual mean=-0.000002 rms=0.001178 Jy/beam
! Combined flux in latest and established models = 0.213179 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.213179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067717Jy  sigma=1.483618
! Fit after  self-cal, rms=0.067664Jy  sigma=1.482349
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.121 mas, bmaj=1.256 mas, bpa=4.158 degrees
! Estimated noise=0.248764 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00643644 Jy
! Component: 100  -  total flux cleaned = 0.00956934 Jy
! Component: 150  -  total flux cleaned = 0.011269 Jy
! Component: 200  -  total flux cleaned = 0.0122123 Jy
! Total flux subtracted in 200 components = 0.0122123 Jy
! Clean residual min=-0.004162 max=0.005127 Jy/beam
! Clean residual mean=-0.000017 rms=0.001163 Jy/beam
! Combined flux in latest and established models = 0.225392 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 24 components and 0.225392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067197Jy  sigma=1.465994
! Fit after  self-cal, rms=0.067189Jy  sigma=1.465714
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.121 x 1.256 at 4.158 degrees (North through East)
! Clean map  min=-0.0039686  max=0.2007 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.04     KP        0.96     
!   LA        0.95     MK        0.97     NL        1.04     OV        0.95     
!   PT        1.09     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.04     KP        0.99     
!   LA        0.96     MK        1.01     NL        1.03     OV        0.99     
!   PT        1.13     SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.04     KP        1.00     
!   LA        0.97     MK        1.04     NL        1.06     OV        1.02     
!   PT        1.11     SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        0.98     KP        0.98     
!   LA        0.95     MK        1.02     NL        1.01     OV        0.95     
!   PT        1.11     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.99     KP        0.96     
!   LA        0.95     MK        0.99     NL        1.00     OV        0.96     
!   PT        1.06     SC        1.05     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.02     KP        0.99     
!   LA        0.98     MK        1.04     NL        1.00     OV        0.98     
!   PT        1.12     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.03     KP        1.01     
!   LA        0.98     MK        1.02     NL        1.06     OV        1.01     
!   PT        1.11     SC        1.12     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.00     KP        0.98     
!   LA        0.93     MK        1.03     NL        1.02     OV        0.96     
!   PT        1.12     SC        1.07     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.99     KP        0.97     
!   LA        0.94     MK        1.05     NL        1.02     OV        1.00     
!   PT        1.09     SC        1.06     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.96     KP        0.97     
!   LA        0.93     MK        0.99     NL        1.01     OV        0.94     
!   PT        1.05     SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.95     HN        0.98     KP        0.94     
!   LA        0.92     MK        0.99     NL        1.03     OV        0.98     
!   PT        1.05     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.92     HN        0.94     KP        0.94     
!   LA        0.91     MK        0.99     NL        1.00     OV        0.92     
!   PT        1.00     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.067189Jy  sigma=1.465714
! Fit after  self-cal, rms=0.065970Jy  sigma=1.425436
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.132 mas, bmaj=1.267 mas, bpa=3.107 degrees
! Estimated noise=0.249265 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0011576 Jy
! Component: 100  -  total flux cleaned = -0.00116079 Jy
! Component: 150  -  total flux cleaned = -0.00118998 Jy
! Component: 200  -  total flux cleaned = -0.00119032 Jy
! Total flux subtracted in 200 components = -0.00119032 Jy
! Clean residual min=-0.003972 max=0.003918 Jy/beam
! Clean residual mean=-0.000025 rms=0.000936 Jy/beam
! Combined flux in latest and established models = 0.224201 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 26 components and 0.224201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065927Jy  sigma=1.424674
! Fit after  self-cal, rms=0.065963Jy  sigma=1.424498
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065963Jy  sigma=1.424498
! Fit after  self-cal, rms=0.064907Jy  sigma=1.392290
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.131 mas, bmaj=1.264 mas, bpa=4.832 degrees
! Estimated noise=0.248583 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000821524 Jy
! Component: 100  -  total flux cleaned = -0.000799898 Jy
! Component: 150  -  total flux cleaned = -0.000779713 Jy
! Component: 200  -  total flux cleaned = -0.000743259 Jy
! Total flux subtracted in 200 components = -0.000743259 Jy
! Clean residual min=-0.001874 max=0.001895 Jy/beam
! Clean residual mean=0.000000 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.223458 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 27 components and 0.223458 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064887Jy  sigma=1.391898
! Fit after  self-cal, rms=0.064913Jy  sigma=1.391751
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120127 Jy
! Component: 100  -  total flux cleaned = 0.000933864 Jy
! Component: 150  -  total flux cleaned = 0.000819504 Jy
! Component: 200  -  total flux cleaned = 0.000742314 Jy
! Total flux subtracted in 200 components = 0.000742314 Jy
! Clean residual min=-0.001912 max=0.001726 Jy/beam
! Clean residual mean=0.000000 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.2242 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 44 components and 0.2242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064861Jy  sigma=1.390692
! Fit after  self-cal, rms=0.064856Jy  sigma=1.390555
! Inverting map 
! Added new window around map position (26.2, 5.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000982922 Jy
! Component: 100  -  total flux cleaned = 0.000750173 Jy
! Component: 150  -  total flux cleaned = 0.000526163 Jy
! Component: 200  -  total flux cleaned = 0.000401758 Jy
! Total flux subtracted in 200 components = 0.000401758 Jy
! Clean residual min=-0.001719 max=0.001787 Jy/beam
! Clean residual mean=0.000001 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.224602 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 56 components and 0.224602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064812Jy  sigma=1.389590
! Fit after  self-cal, rms=0.064810Jy  sigma=1.389542
! Inverting map 
! Added new window around map position (-39.6, 31.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00154626 Jy
! Component: 100  -  total flux cleaned = 0.00202409 Jy
! Component: 150  -  total flux cleaned = 0.00241575 Jy
! Component: 200  -  total flux cleaned = 0.00263291 Jy
! Total flux subtracted in 200 components = 0.00263291 Jy
! Clean residual min=-0.001603 max=0.001536 Jy/beam
! Clean residual mean=0.000003 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.227235 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 70 components and 0.227235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064763Jy  sigma=1.388506
! Fit after  self-cal, rms=0.064763Jy  sigma=1.388464
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064763Jy  sigma=1.388464
! Fit after  self-cal, rms=0.064576Jy  sigma=1.388125
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.133 mas, bmaj=1.264 mas, bpa=4.218 degrees
! Estimated noise=0.24796 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.84041e-05 Jy
! Component: 100  -  total flux cleaned = 0.000272291 Jy
! Component: 150  -  total flux cleaned = 0.000409532 Jy
! Component: 200  -  total flux cleaned = 0.000429882 Jy
! Total flux subtracted in 200 components = 0.000429882 Jy
! Clean residual min=-0.001585 max=0.001488 Jy/beam
! Clean residual mean=0.000003 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.227665 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 76 components and 0.227665 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064557Jy  sigma=1.387709
! Fit after  self-cal, rms=0.064555Jy  sigma=1.387691
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.60995e-05 Jy
! Component: 100  -  total flux cleaned = 8.46692e-05 Jy
! Component: 150  -  total flux cleaned = 8.39729e-05 Jy
! Component: 200  -  total flux cleaned = 1.79081e-05 Jy
! Total flux subtracted in 200 components = 1.79081e-05 Jy
! Clean residual min=-0.001554 max=0.001469 Jy/beam
! Clean residual mean=0.000003 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.227683 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 87 components and 0.227683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064546Jy  sigma=1.387496
! Fit after  self-cal, rms=0.064546Jy  sigma=1.387494
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064546Jy  sigma=1.387494
! Fit after  self-cal, rms=0.064489Jy  sigma=1.387433
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.35 mas, bmaj=2.405 mas, bpa=-88.28 degrees
! Estimated noise=0.299546 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000219052 Jy
! Component: 100  -  total flux cleaned = -0.000362853 Jy
! Component: 150  -  total flux cleaned = -0.000479352 Jy
! Component: 200  -  total flux cleaned = -0.000504303 Jy
! Total flux subtracted in 200 components = -0.000504303 Jy
! Clean residual min=-0.001557 max=0.001632 Jy/beam
! Clean residual mean=0.000006 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.227179 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 103 components and 0.227179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064487Jy  sigma=1.387352
! Fit after  self-cal, rms=0.064487Jy  sigma=1.387336
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.35788e-05 Jy
! Component: 100  -  total flux cleaned = -9.3924e-05 Jy
! Component: 150  -  total flux cleaned = -9.41114e-05 Jy
! Component: 200  -  total flux cleaned = -8.45748e-05 Jy
! Total flux subtracted in 200 components = -8.45748e-05 Jy
! Clean residual min=-0.001501 max=0.001625 Jy/beam
! Clean residual mean=0.000006 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.227094 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 110 components and 0.227094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064487Jy  sigma=1.387323
! Fit after  self-cal, rms=0.064487Jy  sigma=1.387317
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.134 mas, bmaj=1.264 mas, bpa=4.007 degrees
! Estimated noise=0.24768 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.134 x 1.264 at 4.007 degrees (North through East)
! Clean map  min=-0.0014272  max=0.19999 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8815 mas, bmaj=0.9899 mas, bpa=-13.9 degrees
! Estimated noise=0.50016 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.153064 Jy
! Component: 100  -  total flux cleaned = 0.189176 Jy
! Component: 150  -  total flux cleaned = 0.20398 Jy
! Component: 200  -  total flux cleaned = 0.211626 Jy
! Total flux subtracted in 200 components = 0.211626 Jy
! Clean residual min=-0.003646 max=0.003711 Jy/beam
! Clean residual mean=0.000000 rms=0.000873 Jy/beam
! Combined flux in latest and established models = 0.211626 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.211626 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.134 mas, bmaj=1.264 mas, bpa=4.007 degrees
! Estimated noise=0.24768 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00597826 Jy
! Component: 100  -  total flux cleaned = 0.00904571 Jy
! Component: 150  -  total flux cleaned = 0.0111585 Jy
! Component: 200  -  total flux cleaned = 0.0127256 Jy
! Total flux subtracted in 200 components = 0.0127256 Jy
! Clean residual min=-0.001671 max=0.001662 Jy/beam
! Clean residual mean=-0.000000 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.224352 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 29 components and 0.224352 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.35 mas, bmaj=2.405 mas, bpa=-88.28 degrees
! Estimated noise=0.299546 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121499 Jy
! Component: 100  -  total flux cleaned = 0.00162142 Jy
! Component: 150  -  total flux cleaned = 0.00202106 Jy
! Component: 200  -  total flux cleaned = 0.00233355 Jy
! Total flux subtracted in 200 components = 0.00233355 Jy
! Clean residual min=-0.001508 max=0.001637 Jy/beam
! Clean residual mean=0.000004 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.226685 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.85058e-05 Jy
! Component: 100  -  total flux cleaned = 0.00021065 Jy
! Component: 150  -  total flux cleaned = 0.000311842 Jy
! Component: 200  -  total flux cleaned = 0.000367892 Jy
! Total flux subtracted in 200 components = 0.000367892 Jy
! Clean residual min=-0.001498 max=0.001575 Jy/beam
! Clean residual mean=0.000005 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.227053 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 65 components and 0.227053 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.134 mas, bmaj=1.264 mas, bpa=4.007 degrees
! Estimated noise=0.24768 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.6993e-05 Jy
! Component: 100  -  total flux cleaned = 0.000166664 Jy
! Component: 150  -  total flux cleaned = 0.000114853 Jy
! Component: 200  -  total flux cleaned = 9.09932e-05 Jy
! Total flux subtracted in 200 components = 9.09932e-05 Jy
! Clean residual min=-0.001509 max=0.001552 Jy/beam
! Clean residual mean=0.000003 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.227144 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 88 components and 0.227144 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064512Jy  sigma=1.387810
! Fit after  self-cal, rms=0.064508Jy  sigma=1.387771
wmodel /J1302+4819_X_map.mod
! wmodel: Unable to open new model file: /J1302+4819_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1302+4819_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.134 x 1.264 at 4.007 degrees (North through East)
! Clean map  min=-0.0013972  max=0.20015 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1302+4819_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.200148 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000334071 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.500736 0.500736 1.00147 2.00294 4.00589 8.01178 16.0236 32.0471 64.0942
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.2 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  599.118 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1302+4819_X_dfm.log closed on Thu May 19 20:20:11 2016