! Started logfile: /scr/pima/bg219b_uvs/J1247+7046_X_dfm.log on Thu May 19 20:19:37 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1247+7046_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1247+7046_X_uva.fits
! AN table 1: 60 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.837037 visibilities/baseline/integration-bin.
! Found source: J1247+7046
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 27120 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1247+7046_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015086Jy  sigma=24.242121
! Fit after  self-cal, rms=0.829835Jy  sigma=19.805711
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7404 mas, bmaj=0.9856 mas, bpa=-11.98 degrees
! Estimated noise=0.441001 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.12931 Jy
! Component: 100  -  total flux cleaned = 0.157909 Jy
! Total flux subtracted in 100 components = 0.157909 Jy
! Clean residual min=-0.004287 max=0.009544 Jy/beam
! Clean residual mean=0.000003 rms=0.001055 Jy/beam
! Combined flux in latest and established models = 0.157909 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.157909 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065268Jy  sigma=1.464209
! Fit after  self-cal, rms=0.065199Jy  sigma=1.462841
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105821 Jy
! Component: 100  -  total flux cleaned = 0.0161821 Jy
! Total flux subtracted in 100 components = 0.0161821 Jy
! Clean residual min=-0.002896 max=0.003641 Jy/beam
! Clean residual mean=0.000001 rms=0.000749 Jy/beam
! Combined flux in latest and established models = 0.174091 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 9 components and 0.174091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062770Jy  sigma=1.401365
! Fit after  self-cal, rms=0.062775Jy  sigma=1.401240
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=1.283 mas, bpa=-10.01 degrees
! Estimated noise=0.191748 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00499884 Jy
! Component: 100  -  total flux cleaned = 0.00728909 Jy
! Component: 150  -  total flux cleaned = 0.00845418 Jy
! Component: 200  -  total flux cleaned = 0.00906886 Jy
! Total flux subtracted in 200 components = 0.00906886 Jy
! Clean residual min=-0.002186 max=0.002415 Jy/beam
! Clean residual mean=0.000000 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.18316 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 27 components and 0.18316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062401Jy  sigma=1.392646
! Fit after  self-cal, rms=0.062406Jy  sigma=1.392603
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.007 x 1.283 at -10.01 degrees (North through East)
! Clean map  min=-0.0020604  max=0.17131 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.04     KP        0.96     
!   LA        0.99     MK        0.96     NL        1.02     OV        0.97     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.06     HN        1.07     KP        1.01     
!   LA        0.99     MK        1.00     NL        1.04     OV        1.03     
!   PT        0.97     SC        1.08     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.05     HN        1.06     KP        1.02     
!   LA        1.01     MK        1.01     NL        1.04     OV        1.02     
!   PT        1.00     SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.00     KP        0.97     
!   LA        0.98     MK        1.00     NL        1.02     OV        0.99     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.01     KP        0.99     
!   LA        0.98     MK        0.96     NL        1.03     OV        0.97     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     HN        1.01     KP        1.00     
!   LA        1.00     MK        0.99     NL        1.07     OV        1.03     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.07     HN        1.04     KP        1.02     
!   LA        1.01     MK        1.00     NL        1.05     OV        0.99     
!   PT        1.01     SC        1.08     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.99     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.03     OV        0.98     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        0.98     KP        0.99     
!   LA        0.97     MK        1.02     NL        1.07     OV        0.97     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.96     HN        0.99     KP        0.98     
!   LA        0.95     MK        0.96     NL        1.00     OV        0.99     
!   PT        0.94     SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        1.00     KP        0.95     
!   LA        0.92     MK        1.00     NL        1.04     OV        0.98     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.97     HN        0.98     KP        0.97     
!   LA        0.94     MK        0.94     NL        0.99     OV        0.94     
!   PT        0.92     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.062406Jy  sigma=1.392603
! Fit after  self-cal, rms=0.061290Jy  sigma=1.373207
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=1.282 mas, bpa=-10.18 degrees
! Estimated noise=0.191629 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000331951 Jy
! Component: 100  -  total flux cleaned = -0.000359339 Jy
! Component: 150  -  total flux cleaned = -0.00039498 Jy
! Component: 200  -  total flux cleaned = -0.000424621 Jy
! Total flux subtracted in 200 components = -0.000424621 Jy
! Clean residual min=-0.001262 max=0.001422 Jy/beam
! Clean residual mean=0.000001 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.182736 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 30 components and 0.182736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061284Jy  sigma=1.373075
! Fit after  self-cal, rms=0.061293Jy  sigma=1.373018
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061293Jy  sigma=1.373018
! Fit after  self-cal, rms=0.061283Jy  sigma=1.370972
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=1.283 mas, bpa=-10.17 degrees
! Estimated noise=0.191625 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000288822 Jy
! Component: 100  -  total flux cleaned = -0.000327282 Jy
! Component: 150  -  total flux cleaned = -0.000351674 Jy
! Component: 200  -  total flux cleaned = -0.000380009 Jy
! Total flux subtracted in 200 components = -0.000380009 Jy
! Clean residual min=-0.001170 max=0.001339 Jy/beam
! Clean residual mean=0.000001 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.182356 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 32 components and 0.182356 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061279Jy  sigma=1.370910
! Fit after  self-cal, rms=0.061282Jy  sigma=1.370892
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124195 Jy
! Component: 100  -  total flux cleaned = 0.00124497 Jy
! Component: 150  -  total flux cleaned = 0.00124533 Jy
! Component: 200  -  total flux cleaned = 0.00120767 Jy
! Total flux subtracted in 200 components = 0.00120767 Jy
! Clean residual min=-0.001122 max=0.001172 Jy/beam
! Clean residual mean=0.000001 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.183563 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 48 components and 0.183563 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061253Jy  sigma=1.370162
! Fit after  self-cal, rms=0.061250Jy  sigma=1.370112
! Inverting map 
! Added new window around map position (-42.4, -21.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000837123 Jy
! Component: 100  -  total flux cleaned = 0.000883434 Jy
! Component: 150  -  total flux cleaned = 0.000904258 Jy
! Component: 200  -  total flux cleaned = 0.000904707 Jy
! Total flux subtracted in 200 components = 0.000904707 Jy
! Clean residual min=-0.001079 max=0.001071 Jy/beam
! Clean residual mean=0.000001 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.184468 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 61 components and 0.184468 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061229Jy  sigma=1.369602
! Fit after  self-cal, rms=0.061228Jy  sigma=1.369585
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061228Jy  sigma=1.369585
! Fit after  self-cal, rms=0.061170Jy  sigma=1.369530
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=1.283 mas, bpa=-10.19 degrees
! Estimated noise=0.191529 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000268851 Jy
! Component: 100  -  total flux cleaned = 0.000286151 Jy
! Component: 150  -  total flux cleaned = 0.000255576 Jy
! Component: 200  -  total flux cleaned = 0.000212786 Jy
! Total flux subtracted in 200 components = 0.000212786 Jy
! Clean residual min=-0.001064 max=0.001060 Jy/beam
! Clean residual mean=0.000001 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.184681 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 71 components and 0.184681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061162Jy  sigma=1.369347
! Fit after  self-cal, rms=0.061162Jy  sigma=1.369339
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.89009e-05 Jy
! Component: 100  -  total flux cleaned = 9.25532e-06 Jy
! Component: 150  -  total flux cleaned = -4.13593e-05 Jy
! Component: 200  -  total flux cleaned = -7.83131e-05 Jy
! Total flux subtracted in 200 components = -7.83131e-05 Jy
! Clean residual min=-0.001052 max=0.001041 Jy/beam
! Clean residual mean=0.000001 rms=0.000232 Jy/beam
! Combined flux in latest and established models = 0.184602 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 80 components and 0.184602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061157Jy  sigma=1.369234
! Fit after  self-cal, rms=0.061157Jy  sigma=1.369231
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061157Jy  sigma=1.369231
! Fit after  self-cal, rms=0.061153Jy  sigma=1.369221
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.488 mas, bmaj=2.759 mas, bpa=34.07 degrees
! Estimated noise=0.241863 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000107327 Jy
! Component: 100  -  total flux cleaned = 9.24303e-05 Jy
! Component: 150  -  total flux cleaned = 6.00205e-05 Jy
! Component: 200  -  total flux cleaned = 4.29351e-05 Jy
! Total flux subtracted in 200 components = 4.29351e-05 Jy
! Clean residual min=-0.000851 max=0.001079 Jy/beam
! Clean residual mean=0.000002 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.184645 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 92 components and 0.184645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061152Jy  sigma=1.369191
! Fit after  self-cal, rms=0.061152Jy  sigma=1.369184
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.12102e-05 Jy
! Component: 100  -  total flux cleaned = -3.78874e-06 Jy
! Component: 150  -  total flux cleaned = -1.70144e-05 Jy
! Component: 200  -  total flux cleaned = -2.90991e-05 Jy
! Total flux subtracted in 200 components = -2.90991e-05 Jy
! Clean residual min=-0.000849 max=0.001051 Jy/beam
! Clean residual mean=0.000002 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.184616 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 98 components and 0.184616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061151Jy  sigma=1.369179
! Fit after  self-cal, rms=0.061151Jy  sigma=1.369180
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=1.283 mas, bpa=-10.2 degrees
! Estimated noise=0.191563 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.014 x 1.283 at -10.2 degrees (North through East)
! Clean map  min=-0.00091728  max=0.17116 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7452 mas, bmaj=0.9823 mas, bpa=-12.15 degrees
! Estimated noise=0.440098 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.129156 Jy
! Component: 100  -  total flux cleaned = 0.157689 Jy
! Component: 150  -  total flux cleaned = 0.167823 Jy
! Component: 200  -  total flux cleaned = 0.173202 Jy
! Total flux subtracted in 200 components = 0.173202 Jy
! Clean residual min=-0.002678 max=0.003188 Jy/beam
! Clean residual mean=0.000002 rms=0.000683 Jy/beam
! Combined flux in latest and established models = 0.173202 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.173202 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=1.283 mas, bpa=-10.2 degrees
! Estimated noise=0.191563 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00498331 Jy
! Component: 100  -  total flux cleaned = 0.00737742 Jy
! Component: 150  -  total flux cleaned = 0.00897043 Jy
! Component: 200  -  total flux cleaned = 0.0101051 Jy
! Total flux subtracted in 200 components = 0.0101051 Jy
! Clean residual min=-0.001143 max=0.001036 Jy/beam
! Clean residual mean=0.000001 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.183307 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 31 components and 0.183307 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.488 mas, bmaj=2.759 mas, bpa=34.07 degrees
! Estimated noise=0.241863 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105031 Jy
! Component: 100  -  total flux cleaned = 0.00124249 Jy
! Component: 150  -  total flux cleaned = 0.0012849 Jy
! Component: 200  -  total flux cleaned = 0.00129741 Jy
! Total flux subtracted in 200 components = 0.00129741 Jy
! Clean residual min=-0.000912 max=0.001049 Jy/beam
! Clean residual mean=0.000002 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.184605 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.10351e-05 Jy
! Component: 100  -  total flux cleaned = 1.08108e-05 Jy
! Component: 150  -  total flux cleaned = 2.00629e-05 Jy
! Component: 200  -  total flux cleaned = 1.98022e-05 Jy
! Total flux subtracted in 200 components = 1.98022e-05 Jy
! Clean residual min=-0.000881 max=0.001045 Jy/beam
! Clean residual mean=0.000002 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.184624 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 69 components and 0.184624 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=1.283 mas, bpa=-10.2 degrees
! Estimated noise=0.191563 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.17658e-05 Jy
! Component: 100  -  total flux cleaned = 0.000108685 Jy
! Component: 150  -  total flux cleaned = 0.000129923 Jy
! Component: 200  -  total flux cleaned = 0.00011199 Jy
! Total flux subtracted in 200 components = 0.00011199 Jy
! Clean residual min=-0.001094 max=0.001018 Jy/beam
! Clean residual mean=0.000001 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.184736 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 83 components and 0.184736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061165Jy  sigma=1.369435
! Fit after  self-cal, rms=0.061163Jy  sigma=1.369413
wmodel /J1247+7046_X_map.mod
! wmodel: Unable to open new model file: /J1247+7046_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1247+7046_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.014 x 1.283 at -10.2 degrees (North through East)
! Clean map  min=-0.00094269  max=0.1712 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1247+7046_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.171204 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000233059 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.408389 0.408389 0.816777 1.63355 3.26711 6.53422 13.0684 26.1369 52.2738
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.171 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  734.594 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1247+7046_X_dfm.log closed on Thu May 19 20:19:40 2016