! Started logfile: /scr/pima/bg219b_uvs/J1228+3128_X_dfm.log on Thu May 19 20:18:41 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1228+3128_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1228+3128_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.814198 visibilities/baseline/integration-bin.
! Found source: J1228+3128
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 15828 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1228+3128_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.022726Jy  sigma=23.820059
! Fit after  self-cal, rms=0.819297Jy  sigma=18.992149
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8697 mas, bmaj=1.148 mas, bpa=-1.048 degrees
! Estimated noise=0.506596 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.135182 Jy
! Component: 100  -  total flux cleaned = 0.173369 Jy
! Total flux subtracted in 100 components = 0.173369 Jy
! Clean residual min=-0.009872 max=0.035585 Jy/beam
! Clean residual mean=-0.000007 rms=0.002786 Jy/beam
! Combined flux in latest and established models = 0.173369 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.173369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083083Jy  sigma=1.880734
! Fit after  self-cal, rms=0.083013Jy  sigma=1.878344
! Inverting map 
! Added new window around map position (-1, -1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.030421 Jy
! Component: 100  -  total flux cleaned = 0.0449687 Jy
! Total flux subtracted in 100 components = 0.0449687 Jy
! Clean residual min=-0.006769 max=0.009613 Jy/beam
! Clean residual mean=0.000003 rms=0.001581 Jy/beam
! Combined flux in latest and established models = 0.218338 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.218338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069898Jy  sigma=1.554086
! Fit after  self-cal, rms=0.069115Jy  sigma=1.536613
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010679 Jy
! Component: 100  -  total flux cleaned = 0.0172364 Jy
! Total flux subtracted in 100 components = 0.0172364 Jy
! Clean residual min=-0.005520 max=0.007406 Jy/beam
! Clean residual mean=0.000007 rms=0.001300 Jy/beam
! Combined flux in latest and established models = 0.235574 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 21 components and 0.235574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066936Jy  sigma=1.478808
! Fit after  self-cal, rms=0.066859Jy  sigma=1.476884
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.096 mas, bmaj=1.445 mas, bpa=3.9 degrees
! Estimated noise=0.263472 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 35.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00935625 Jy
! Component: 100  -  total flux cleaned = 0.0152228 Jy
! Component: 150  -  total flux cleaned = 0.0195431 Jy
! Component: 200  -  total flux cleaned = 0.0228871 Jy
! Total flux subtracted in 200 components = 0.0228871 Jy
! Clean residual min=-0.004963 max=0.006675 Jy/beam
! Clean residual mean=0.000007 rms=0.001221 Jy/beam
! Combined flux in latest and established models = 0.258462 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 62 components and 0.258462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065346Jy  sigma=1.437732
! Fit after  self-cal, rms=0.065203Jy  sigma=1.433997
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.096 x 1.445 at 3.9 degrees (North through East)
! Clean map  min=-0.0040706  max=0.17641 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        0.99     KP        0.93     
!   LA        0.97     MK        1.00     NL        0.98     OV        0.95     
!   PT        1.04     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.02     KP        0.94     
!   LA        0.99     MK        1.03     NL        1.01     OV        1.02     
!   PT        1.06     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.07     KP        0.97     
!   LA        1.00     MK        1.03     NL        1.01     OV        1.00     
!   PT        1.07     SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.99     KP        0.96     
!   LA        0.98     MK        0.99     NL        0.96     OV        0.99     
!   PT        1.06     SC        1.05     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.01     KP        0.95     
!   LA        0.98     MK        1.01     NL        0.98     OV        0.97     
!   PT        1.05     SC        1.04     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        1.03     KP        0.97     
!   LA        1.00     MK        1.05     NL        1.02     OV        0.96     
!   PT        1.06     SC        1.05     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.02     KP        1.00     
!   LA        1.02     MK        1.04     NL        0.99     OV        1.01     
!   PT        1.09     SC        1.15     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.97     KP        0.98     
!   LA        0.97     MK        1.05     NL        0.99     OV        0.96     
!   PT        1.07     SC        1.08     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.01     HN        0.98     KP        0.97     
!   LA        0.97     MK        1.01     NL        1.00     OV        0.98     
!   PT        1.07     SC        1.09     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.95     HN        0.94     KP        0.95     
!   LA        0.92     MK        1.03     NL        0.97     OV        0.98     
!   PT        1.04     SC        1.08     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.95     HN        0.95     KP        0.93     
!   LA        0.95     MK        1.03     NL        0.98     OV        0.97     
!   PT        1.05     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.92     HN        0.94     KP        0.92     
!   LA        0.95     MK        0.98     NL        0.96     OV        0.92     
!   PT        1.02     SC        1.08     
! 
! 
! Fit before self-cal, rms=0.065203Jy  sigma=1.433997
! Fit after  self-cal, rms=0.063643Jy  sigma=1.402185
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.112 mas, bmaj=1.461 mas, bpa=3.022 degrees
! Estimated noise=0.261422 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00184269 Jy
! Component: 100  -  total flux cleaned = 0.00276073 Jy
! Component: 150  -  total flux cleaned = 0.00341642 Jy
! Component: 200  -  total flux cleaned = 0.00397872 Jy
! Total flux subtracted in 200 components = 0.00397872 Jy
! Clean residual min=-0.003656 max=0.004345 Jy/beam
! Clean residual mean=0.000003 rms=0.000903 Jy/beam
! Combined flux in latest and established models = 0.26244 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 79 components and 0.26244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063506Jy  sigma=1.399130
! Fit after  self-cal, rms=0.063529Jy  sigma=1.398761
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063529Jy  sigma=1.398761
! Fit after  self-cal, rms=0.063435Jy  sigma=1.374983
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.11 mas, bmaj=1.453 mas, bpa=4.029 degrees
! Estimated noise=0.262137 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000978036 Jy
! Component: 100  -  total flux cleaned = -0.00136815 Jy
! Component: 150  -  total flux cleaned = -0.00158887 Jy
! Component: 200  -  total flux cleaned = -0.00170041 Jy
! Total flux subtracted in 200 components = -0.00170041 Jy
! Clean residual min=-0.002437 max=0.002229 Jy/beam
! Clean residual mean=0.000000 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.26074 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 90 components and 0.26074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063346Jy  sigma=1.373074
! Fit after  self-cal, rms=0.063362Jy  sigma=1.372729
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9.2, -16).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0023989 Jy
! Component: 100  -  total flux cleaned = 0.00356764 Jy
! Component: 150  -  total flux cleaned = 0.00398971 Jy
! Component: 200  -  total flux cleaned = 0.00409376 Jy
! Total flux subtracted in 200 components = 0.00409376 Jy
! Clean residual min=-0.002011 max=0.001936 Jy/beam
! Clean residual mean=-0.000001 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.264834 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 108 components and 0.264834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063264Jy  sigma=1.370058
! Fit after  self-cal, rms=0.063257Jy  sigma=1.369941
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063257Jy  sigma=1.369941
! Fit after  self-cal, rms=0.063144Jy  sigma=1.369487
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.11 mas, bmaj=1.451 mas, bpa=4.135 degrees
! Estimated noise=0.261571 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000789756 Jy
! Component: 100  -  total flux cleaned = -0.000716751 Jy
! Component: 150  -  total flux cleaned = -0.00056135 Jy
! Component: 200  -  total flux cleaned = -0.000418903 Jy
! Total flux subtracted in 200 components = -0.000418903 Jy
! Clean residual min=-0.001883 max=0.001752 Jy/beam
! Clean residual mean=-0.000001 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.264415 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 118 components and 0.264415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063103Jy  sigma=1.368548
! Fit after  self-cal, rms=0.063102Jy  sigma=1.368460
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000269535 Jy
! Component: 100  -  total flux cleaned = -0.000137902 Jy
! Component: 150  -  total flux cleaned = -1.75224e-05 Jy
! Component: 200  -  total flux cleaned = 4.85867e-05 Jy
! Total flux subtracted in 200 components = 4.85867e-05 Jy
! Clean residual min=-0.001737 max=0.001673 Jy/beam
! Clean residual mean=-0.000001 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.264463 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 128 components and 0.264463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063082Jy  sigma=1.368022
! Fit after  self-cal, rms=0.063080Jy  sigma=1.367992
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063080Jy  sigma=1.367992
! Fit after  self-cal, rms=0.063072Jy  sigma=1.367794
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.237 mas, bmaj=2.536 mas, bpa=16.23 degrees
! Estimated noise=0.314414 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000973129 Jy
! Component: 100  -  total flux cleaned = -0.00104171 Jy
! Component: 150  -  total flux cleaned = -0.000971534 Jy
! Component: 200  -  total flux cleaned = -0.000832289 Jy
! Total flux subtracted in 200 components = -0.000832289 Jy
! Clean residual min=-0.002010 max=0.002087 Jy/beam
! Clean residual mean=-0.000002 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.263631 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 143 components and 0.263631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063053Jy  sigma=1.367425
! Fit after  self-cal, rms=0.063051Jy  sigma=1.367320
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000186455 Jy
! Component: 100  -  total flux cleaned = -0.000111363 Jy
! Component: 150  -  total flux cleaned = -3.11462e-05 Jy
! Component: 200  -  total flux cleaned = 8.13641e-05 Jy
! Total flux subtracted in 200 components = 8.13641e-05 Jy
! Clean residual min=-0.001891 max=0.002004 Jy/beam
! Clean residual mean=-0.000001 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.263712 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 155 components and 0.263712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063045Jy  sigma=1.367228
! Fit after  self-cal, rms=0.063044Jy  sigma=1.367189
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.11 mas, bmaj=1.451 mas, bpa=4.264 degrees
! Estimated noise=0.261392 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.11 x 1.451 at 4.264 degrees (North through East)
! Clean map  min=-0.0015361  max=0.1756 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8809 mas, bmaj=1.151 mas, bpa=-0.3436 degrees
! Estimated noise=0.505441 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.134457 Jy
! Component: 100  -  total flux cleaned = 0.180558 Jy
! Component: 150  -  total flux cleaned = 0.204864 Jy
! Component: 200  -  total flux cleaned = 0.218572 Jy
! Total flux subtracted in 200 components = 0.218572 Jy
! Clean residual min=-0.004608 max=0.006976 Jy/beam
! Clean residual mean=-0.000002 rms=0.001104 Jy/beam
! Combined flux in latest and established models = 0.218572 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.218572 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.11 mas, bmaj=1.451 mas, bpa=4.264 degrees
! Estimated noise=0.261392 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121106 Jy
! Component: 100  -  total flux cleaned = 0.0192393 Jy
! Component: 150  -  total flux cleaned = 0.0238822 Jy
! Component: 200  -  total flux cleaned = 0.0270855 Jy
! Total flux subtracted in 200 components = 0.0270855 Jy
! Clean residual min=-0.002071 max=0.002370 Jy/beam
! Clean residual mean=0.000001 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.245658 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 43 components and 0.245658 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.237 mas, bmaj=2.536 mas, bpa=16.23 degrees
! Estimated noise=0.314414 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00393711 Jy
! Component: 100  -  total flux cleaned = 0.00675513 Jy
! Component: 150  -  total flux cleaned = 0.00889149 Jy
! Component: 200  -  total flux cleaned = 0.0105741 Jy
! Total flux subtracted in 200 components = 0.0105741 Jy
! Clean residual min=-0.002242 max=0.002072 Jy/beam
! Clean residual mean=0.000001 rms=0.000591 Jy/beam
! Combined flux in latest and established models = 0.256232 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135193 Jy
! Component: 100  -  total flux cleaned = 0.00245423 Jy
! Component: 150  -  total flux cleaned = 0.00336259 Jy
! Component: 200  -  total flux cleaned = 0.00411527 Jy
! Total flux subtracted in 200 components = 0.00411527 Jy
! Clean residual min=-0.001972 max=0.001943 Jy/beam
! Clean residual mean=0.000001 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.260347 Jy
! Adding 85 model components to the UV plane model.
! The established model now contains 123 components and 0.260347 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.11 mas, bmaj=1.451 mas, bpa=4.264 degrees
! Estimated noise=0.261392 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000856354 Jy
! Component: 100  -  total flux cleaned = 0.00117473 Jy
! Component: 150  -  total flux cleaned = 0.00138914 Jy
! Component: 200  -  total flux cleaned = 0.00155488 Jy
! Total flux subtracted in 200 components = 0.00155488 Jy
! Clean residual min=-0.001836 max=0.001540 Jy/beam
! Clean residual mean=-0.000000 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.261902 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 140 components and 0.261902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063093Jy  sigma=1.368359
! Fit after  self-cal, rms=0.063088Jy  sigma=1.368218
wmodel /J1228+3128_X_map.mod
! wmodel: Unable to open new model file: /J1228+3128_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1228+3128_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.11 x 1.451 at 4.264 degrees (North through East)
! Clean map  min=-0.0017146  max=0.17607 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1228+3128_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.176069 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000387226 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.659785 0.659785 1.31957 2.63914 5.27828 10.5566 21.1131 42.2262 84.4525
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.176 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  454.693 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1228+3128_X_dfm.log closed on Thu May 19 20:18:44 2016