! Started logfile: /scr/pima/bg219b_uvs/J1225+3914_X_uvs.log on Thu Apr  7 01:53:40 2016
obs /scr/pima/bg219b_uvs/J1225+3914_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1225+3914_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.767901 visibilities/baseline/integration-bin.
! Found source: J1225+3914
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 14928 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J1225+3914_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.008793Jy  sigma=25.670360
! Fit after  self-cal, rms=0.923909Jy  sigma=23.497018
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.892 mas, bmaj=1.133 mas, bpa=-13.55 degrees
! Estimated noise=0.605516 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.057971 Jy
! Component: 100  -  total flux cleaned = 0.0789196 Jy
! Total flux subtracted in 100 components = 0.0789196 Jy
! Clean residual min=-0.011222 max=0.030211 Jy/beam
! Clean residual mean=-0.000008 rms=0.003257 Jy/beam
! Combined flux in latest and established models = 0.0789196 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0789196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.089237Jy  sigma=2.232717
! Fit after  self-cal, rms=0.087125Jy  sigma=2.180306
! Inverting map 
! Added new window around map position (-4.4, -6.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0300287 Jy
! Component: 100  -  total flux cleaned = 0.0429741 Jy
! Total flux subtracted in 100 components = 0.0429741 Jy
! Clean residual min=-0.007400 max=0.015441 Jy/beam
! Clean residual mean=-0.000006 rms=0.002203 Jy/beam
! Combined flux in latest and established models = 0.121894 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 17 components and 0.121894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.076674Jy  sigma=1.905003
! Fit after  self-cal, rms=0.068455Jy  sigma=1.702102
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.024129 Jy
! Component: 100  -  total flux cleaned = 0.0340683 Jy
! Total flux subtracted in 100 components = 0.0340683 Jy
! Clean residual min=-0.006294 max=0.007330 Jy/beam
! Clean residual mean=-0.000005 rms=0.001539 Jy/beam
! Combined flux in latest and established models = 0.155962 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 23 components and 0.155962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060189Jy  sigma=1.487265
! Fit after  self-cal, rms=0.058864Jy  sigma=1.453095
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00891826 Jy
! Component: 100  -  total flux cleaned = 0.0122822 Jy
! Total flux subtracted in 100 components = 0.0122822 Jy
! Clean residual min=-0.005875 max=0.007810 Jy/beam
! Clean residual mean=-0.000005 rms=0.001444 Jy/beam
! Combined flux in latest and established models = 0.168244 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 29 components and 0.168244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057520Jy  sigma=1.416775
! Fit after  self-cal, rms=0.057456Jy  sigma=1.414793
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.121 mas, bmaj=1.381 mas, bpa=-12.77 degrees
! Estimated noise=0.326469 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00600763 Jy
! Component: 100  -  total flux cleaned = 0.00998079 Jy
! Component: 150  -  total flux cleaned = 0.0118366 Jy
! Component: 200  -  total flux cleaned = 0.0130176 Jy
! Total flux subtracted in 200 components = 0.0130176 Jy
! Clean residual min=-0.005158 max=0.009496 Jy/beam
! Clean residual mean=-0.000015 rms=0.001522 Jy/beam
! Combined flux in latest and established models = 0.181262 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 42 components and 0.181262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056665Jy  sigma=1.393565
! Fit after  self-cal, rms=0.056654Jy  sigma=1.393013
! Inverting map 
! Added new window around map position (2, 5.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00902497 Jy
! Component: 100  -  total flux cleaned = 0.0142241 Jy
! Component: 150  -  total flux cleaned = 0.0177705 Jy
! Component: 200  -  total flux cleaned = 0.0205272 Jy
! Total flux subtracted in 200 components = 0.0205272 Jy
! Clean residual min=-0.004133 max=0.005976 Jy/beam
! Clean residual mean=-0.000009 rms=0.001135 Jy/beam
! Combined flux in latest and established models = 0.201789 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 65 components and 0.201789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055116Jy  sigma=1.350914
! Fit after  self-cal, rms=0.054966Jy  sigma=1.346292
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.121 x 1.381 at -12.77 degrees (North through East)
! Clean map  min=-0.0039797  max=0.071063 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.92     HN        1.02     KP        0.90     
!   LA        0.91     MK        1.00     NL        1.04     OV        0.96     
!   PT        1.00     SC        1.14     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.97     HN        1.04     KP        0.92     
!   LA        0.94     MK        1.04     NL        1.08     OV        1.02     
!   PT        1.03     SC        1.10     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.95     HN        0.96     KP        0.97     
!   LA        0.92     MK        1.05     NL        1.07     OV        1.03     
!   PT        1.04     SC        1.08     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        1.03     KP        0.92     
!   LA        0.97     MK        0.99     NL        1.05     OV        0.98     
!   PT        1.01     SC        1.06     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        0.97     KP        0.93     
!   LA        0.93     MK        1.05     NL        1.08     OV        1.00     
!   PT        1.08     SC        1.08     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.94     HN        1.03     KP        1.00     
!   LA        0.97     MK        1.07     NL        1.07     OV        1.00     
!   PT        1.01     SC        1.13     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.91     HN        0.94     KP        0.99     
!   LA        0.93     MK        1.02     NL        1.03     OV        0.98     
!   PT        1.00     SC        1.06     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054966Jy  sigma=1.346292
! Fit after  self-cal, rms=0.055347Jy  sigma=1.329784
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.141 mas, bmaj=1.412 mas, bpa=-13.76 degrees
! Estimated noise=0.327707 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00487799 Jy
! Component: 100  -  total flux cleaned = 0.00687128 Jy
! Component: 150  -  total flux cleaned = 0.00840766 Jy
! Component: 200  -  total flux cleaned = 0.00971825 Jy
! Total flux subtracted in 200 components = 0.00971825 Jy
! Clean residual min=-0.002985 max=0.004029 Jy/beam
! Clean residual mean=-0.000009 rms=0.000779 Jy/beam
! Combined flux in latest and established models = 0.211507 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 79 components and 0.211507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054855Jy  sigma=1.315480
! Fit after  self-cal, rms=0.054856Jy  sigma=1.314205
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054856Jy  sigma=1.314205
! Fit after  self-cal, rms=0.054153Jy  sigma=1.305674
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.145 mas, bmaj=1.41 mas, bpa=-14.26 degrees
! Estimated noise=0.322673 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000770648 Jy
! Component: 100  -  total flux cleaned = -0.000458316 Jy
! Component: 150  -  total flux cleaned = -0.000253644 Jy
! Component: 200  -  total flux cleaned = -0.000210868 Jy
! Total flux subtracted in 200 components = -0.000210868 Jy
! Clean residual min=-0.002291 max=0.002721 Jy/beam
! Clean residual mean=-0.000003 rms=0.000586 Jy/beam
! Combined flux in latest and established models = 0.211296 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 92 components and 0.211296 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054027Jy  sigma=1.302331
! Fit after  self-cal, rms=0.054035Jy  sigma=1.302037
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8.4, -5.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00225691 Jy
! Component: 100  -  total flux cleaned = 0.00282053 Jy
! Component: 150  -  total flux cleaned = 0.00328622 Jy
! Component: 200  -  total flux cleaned = 0.00343502 Jy
! Total flux subtracted in 200 components = 0.00343502 Jy
! Clean residual min=-0.002124 max=0.002286 Jy/beam
! Clean residual mean=-0.000003 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.214731 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 106 components and 0.214731 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053922Jy  sigma=1.298905
! Fit after  self-cal, rms=0.053909Jy  sigma=1.298673
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053909Jy  sigma=1.298673
! Fit after  self-cal, rms=0.053723Jy  sigma=1.295570
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.147 mas, bmaj=1.408 mas, bpa=-14.11 degrees
! Estimated noise=0.321242 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000470125 Jy
! Component: 100  -  total flux cleaned = 0.000608138 Jy
! Component: 150  -  total flux cleaned = 0.000764867 Jy
! Component: 200  -  total flux cleaned = 0.000907075 Jy
! Total flux subtracted in 200 components = 0.000907075 Jy
! Clean residual min=-0.001986 max=0.001865 Jy/beam
! Clean residual mean=-0.000001 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.215638 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 121 components and 0.215638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053684Jy  sigma=1.294566
! Fit after  self-cal, rms=0.053690Jy  sigma=1.294488
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000291551 Jy
! Component: 100  -  total flux cleaned = 0.000369145 Jy
! Component: 150  -  total flux cleaned = 0.000417116 Jy
! Component: 200  -  total flux cleaned = 0.000506795 Jy
! Total flux subtracted in 200 components = 0.000506795 Jy
! Clean residual min=-0.001986 max=0.001794 Jy/beam
! Clean residual mean=-0.000001 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.216145 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 129 components and 0.216145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053669Jy  sigma=1.293966
! Fit after  self-cal, rms=0.053668Jy  sigma=1.293953
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053668Jy  sigma=1.293953
! Fit after  self-cal, rms=0.053617Jy  sigma=1.293868
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.343 mas, bmaj=2.589 mas, bpa=7.517 degrees
! Estimated noise=0.377887 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.71976e-05 Jy
! Component: 100  -  total flux cleaned = -0.000151998 Jy
! Component: 150  -  total flux cleaned = -0.000197075 Jy
! Component: 200  -  total flux cleaned = -0.000237426 Jy
! Total flux subtracted in 200 components = -0.000237426 Jy
! Clean residual min=-0.002215 max=0.002288 Jy/beam
! Clean residual mean=-0.000002 rms=0.000603 Jy/beam
! Combined flux in latest and established models = 0.215908 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 146 components and 0.215908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053609Jy  sigma=1.293575
! Fit after  self-cal, rms=0.053608Jy  sigma=1.293528
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.5921e-06 Jy
! Component: 100  -  total flux cleaned = -2.58525e-06 Jy
! Component: 150  -  total flux cleaned = -3.61212e-05 Jy
! Component: 200  -  total flux cleaned = -8.42814e-05 Jy
! Total flux subtracted in 200 components = -8.42814e-05 Jy
! Clean residual min=-0.002219 max=0.002238 Jy/beam
! Clean residual mean=-0.000002 rms=0.000591 Jy/beam
! Combined flux in latest and established models = 0.215824 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 155 components and 0.215824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053604Jy  sigma=1.293403
! Fit after  self-cal, rms=0.053603Jy  sigma=1.293380
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.149 mas, bmaj=1.409 mas, bpa=-14.16 degrees
! Estimated noise=0.320662 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.149 x 1.409 at -14.16 degrees (North through East)
! Clean map  min=-0.0018369  max=0.069864 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9084 mas, bmaj=1.156 mas, bpa=-15.49 degrees
! Estimated noise=0.603422 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0694381 Jy
! Component: 100  -  total flux cleaned = 0.10584 Jy
! Component: 150  -  total flux cleaned = 0.12741 Jy
! Component: 200  -  total flux cleaned = 0.141327 Jy
! Total flux subtracted in 200 components = 0.141327 Jy
! Clean residual min=-0.005650 max=0.007459 Jy/beam
! Clean residual mean=-0.000003 rms=0.001579 Jy/beam
! Combined flux in latest and established models = 0.141327 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.141327 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.149 mas, bmaj=1.409 mas, bpa=-14.16 degrees
! Estimated noise=0.320662 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0135685 Jy
! Component: 100  -  total flux cleaned = 0.0233698 Jy
! Component: 150  -  total flux cleaned = 0.0311445 Jy
! Component: 200  -  total flux cleaned = 0.0374309 Jy
! Total flux subtracted in 200 components = 0.0374309 Jy
! Clean residual min=-0.003576 max=0.004248 Jy/beam
! Clean residual mean=-0.000009 rms=0.001041 Jy/beam
! Combined flux in latest and established models = 0.178758 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 50 components and 0.178758 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.343 mas, bmaj=2.589 mas, bpa=7.517 degrees
! Estimated noise=0.377887 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00821216 Jy
! Component: 100  -  total flux cleaned = 0.0139436 Jy
! Component: 150  -  total flux cleaned = 0.0184047 Jy
! Component: 200  -  total flux cleaned = 0.0219268 Jy
! Total flux subtracted in 200 components = 0.0219268 Jy
! Clean residual min=-0.002972 max=0.003055 Jy/beam
! Clean residual mean=-0.000009 rms=0.000897 Jy/beam
! Combined flux in latest and established models = 0.200685 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00280625 Jy
! Component: 100  -  total flux cleaned = 0.00505557 Jy
! Component: 150  -  total flux cleaned = 0.00687321 Jy
! Component: 200  -  total flux cleaned = 0.00835536 Jy
! Total flux subtracted in 200 components = 0.00835536 Jy
! Clean residual min=-0.002523 max=0.002320 Jy/beam
! Clean residual mean=-0.000005 rms=0.000676 Jy/beam
! Combined flux in latest and established models = 0.20904 Jy
! Adding 100 model components to the UV plane model.
! The established model now contains 133 components and 0.20904 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.149 mas, bmaj=1.409 mas, bpa=-14.16 degrees
! Estimated noise=0.320662 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000996395 Jy
! Component: 100  -  total flux cleaned = 0.00205135 Jy
! Component: 150  -  total flux cleaned = 0.00300901 Jy
! Component: 200  -  total flux cleaned = 0.003844 Jy
! Total flux subtracted in 200 components = 0.003844 Jy
! Clean residual min=-0.002016 max=0.001968 Jy/beam
! Clean residual mean=-0.000001 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.212884 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 149 components and 0.212884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053747Jy  sigma=1.296984
! Fit after  self-cal, rms=0.053726Jy  sigma=1.296467
wmodel /scr/pima/bg219b_uvs/J1225+3914_X_map.mod
! Writing 149 model components to file: /scr/pima/bg219b_uvs/J1225+3914_X_map.mod
wobs /scr/pima/bg219b_uvs/J1225+3914_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J1225+3914_X_uvs.fits
wwins /scr/pima/bg219b_uvs/J1225+3914_X_map.win
! wwins: Wrote 5 windows to /scr/pima/bg219b_uvs/J1225+3914_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -8.75585e-05 Jy
! Component: 100  -  total flux cleaned = 0.000151944 Jy
! Component: 150  -  total flux cleaned = 0.000184226 Jy
! Component: 200  -  total flux cleaned = 0.000214817 Jy
! Component: 250  -  total flux cleaned = 0.000155227 Jy
! Component: 300  -  total flux cleaned = 0.000183906 Jy
! Component: 350  -  total flux cleaned = 0.00012839 Jy
! Component: 400  -  total flux cleaned = 7.42263e-05 Jy
! Component: 450  -  total flux cleaned = -4.31914e-06 Jy
! Component: 500  -  total flux cleaned = -2.95836e-05 Jy
! Component: 550  -  total flux cleaned = -0.000103617 Jy
! Component: 600  -  total flux cleaned = -0.000127648 Jy
! Component: 650  -  total flux cleaned = -0.000222322 Jy
! Component: 700  -  total flux cleaned = -0.000222131 Jy
! Component: 750  -  total flux cleaned = -0.000267679 Jy
! Component: 800  -  total flux cleaned = -0.000312119 Jy
! Component: 850  -  total flux cleaned = -0.000398789 Jy
! Component: 900  -  total flux cleaned = -0.000377128 Jy
! Component: 950  -  total flux cleaned = -0.000440219 Jy
! Component: 1000  -  total flux cleaned = -0.000481139 Jy
! Component: 1050  -  total flux cleaned = -0.000521636 Jy
! Component: 1100  -  total flux cleaned = -0.00061988 Jy
! Component: 1150  -  total flux cleaned = -0.000561103 Jy
! Component: 1200  -  total flux cleaned = -0.00059926 Jy
! Component: 1250  -  total flux cleaned = -0.00063672 Jy
! Component: 1300  -  total flux cleaned = -0.000654813 Jy
! Component: 1350  -  total flux cleaned = -0.000673041 Jy
! Component: 1400  -  total flux cleaned = -0.00078143 Jy
! Component: 1450  -  total flux cleaned = -0.000834638 Jy
! Component: 1500  -  total flux cleaned = -0.000957355 Jy
! Component: 1550  -  total flux cleaned = -0.00104361 Jy
! Component: 1600  -  total flux cleaned = -0.00107769 Jy
! Component: 1650  -  total flux cleaned = -0.00116221 Jy
! Component: 1700  -  total flux cleaned = -0.00121243 Jy
! Component: 1750  -  total flux cleaned = -0.00127848 Jy
! Component: 1800  -  total flux cleaned = -0.00137615 Jy
! Component: 1850  -  total flux cleaned = -0.00148867 Jy
! Component: 1900  -  total flux cleaned = -0.00155232 Jy
! Component: 1950  -  total flux cleaned = -0.00164657 Jy
! Component: 2000  -  total flux cleaned = -0.00166204 Jy
! Component: 2050  -  total flux cleaned = -0.00173905 Jy
! Component: 2100  -  total flux cleaned = -0.00184538 Jy
! Component: 2150  -  total flux cleaned = -0.00189043 Jy
! Component: 2200  -  total flux cleaned = -0.00196513 Jy
! Component: 2250  -  total flux cleaned = -0.00206834 Jy
! Component: 2300  -  total flux cleaned = -0.00211198 Jy
! Component: 2350  -  total flux cleaned = -0.00215517 Jy
! Component: 2400  -  total flux cleaned = -0.00216948 Jy
! Component: 2450  -  total flux cleaned = -0.00225441 Jy
! Component: 2500  -  total flux cleaned = -0.0022964 Jy
! Component: 2550  -  total flux cleaned = -0.00229645 Jy
! Component: 2600  -  total flux cleaned = -0.00233778 Jy
! Component: 2650  -  total flux cleaned = -0.00232443 Jy
! Component: 2700  -  total flux cleaned = -0.00241927 Jy
! Component: 2750  -  total flux cleaned = -0.00247294 Jy
! Component: 2800  -  total flux cleaned = -0.00245973 Jy
! Component: 2850  -  total flux cleaned = -0.00247316 Jy
! Component: 2900  -  total flux cleaned = -0.00255164 Jy
! Component: 2950  -  total flux cleaned = -0.0025646 Jy
! Component: 3000  -  total flux cleaned = -0.00257743 Jy
! Component: 3050  -  total flux cleaned = -0.00262836 Jy
! Component: 3100  -  total flux cleaned = -0.00266616 Jy
! Component: 3150  -  total flux cleaned = -0.0027163 Jy
! Component: 3200  -  total flux cleaned = -0.00275354 Jy
! Component: 3250  -  total flux cleaned = -0.00276605 Jy
! Component: 3300  -  total flux cleaned = -0.00280288 Jy
! Component: 3350  -  total flux cleaned = -0.00283938 Jy
! Component: 3400  -  total flux cleaned = -0.00285155 Jy
! Component: 3450  -  total flux cleaned = -0.00292358 Jy
! Component: 3500  -  total flux cleaned = -0.00295935 Jy
! Component: 3550  -  total flux cleaned = -0.00297122 Jy
! Component: 3600  -  total flux cleaned = -0.00305335 Jy
! Component: 3650  -  total flux cleaned = -0.00305328 Jy
! Component: 3700  -  total flux cleaned = -0.00307642 Jy
! Component: 3750  -  total flux cleaned = -0.00312254 Jy
! Component: 3800  -  total flux cleaned = -0.00316839 Jy
! Component: 3850  -  total flux cleaned = -0.00319089 Jy
! Component: 3900  -  total flux cleaned = -0.00323591 Jy
! Component: 3950  -  total flux cleaned = -0.00328066 Jy
! Component: 4000  -  total flux cleaned = -0.00326945 Jy
! Component: 4050  -  total flux cleaned = -0.00326957 Jy
! Total flux subtracted in 4096 components = -0.00330258 Jy
! Clean residual min=-0.000690 max=0.000659 Jy/beam
! Clean residual mean=-0.000000 rms=0.000176 Jy/beam
! Combined flux in latest and established models = 0.209581 Jy
keep
! Adding 252 model components to the UV plane model.
! The established model now contains 401 components and 0.209581 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J1225+3914_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.149 x 1.409 at -14.16 degrees (North through East)
! Clean map  min=-0.0013307  max=0.069678 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1225+3914_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0696777 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000173122 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.745381 0.745381 1.49076 2.98153 5.96305 11.9261 23.8522 47.7044 95.4088
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.069 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  402.478 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1225+3914_X_uvs.log closed on Thu Apr  7 01:53:45 2016