! Started logfile: /scr/pima/bg219b_uvs/J1223+0650_X_dfm.log on Thu May 19 20:18:09 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1223+0650_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1223+0650_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.910383 visibilities/baseline/integration-bin.
! Found source: J1223+0650
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29988 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1223+0650_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.018170Jy  sigma=24.732691
! Fit after  self-cal, rms=0.863145Jy  sigma=21.004930
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6534 mas, bmaj=1.688 mas, bpa=-3.583 degrees
! Estimated noise=0.347901 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0975475 Jy
! Component: 100  -  total flux cleaned = 0.140621 Jy
! Total flux subtracted in 100 components = 0.140621 Jy
! Clean residual min=-0.009751 max=0.021919 Jy/beam
! Clean residual mean=-0.000000 rms=0.002274 Jy/beam
! Combined flux in latest and established models = 0.140621 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.140621 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083613Jy  sigma=1.970022
! Fit after  self-cal, rms=0.082714Jy  sigma=1.947996
! Inverting map 
! Added new window around map position (2.4, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0264261 Jy
! Component: 100  -  total flux cleaned = 0.0429401 Jy
! Total flux subtracted in 100 components = 0.0429401 Jy
! Clean residual min=-0.006256 max=0.010035 Jy/beam
! Clean residual mean=0.000000 rms=0.001480 Jy/beam
! Combined flux in latest and established models = 0.183561 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 18 components and 0.183561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069869Jy  sigma=1.629161
! Fit after  self-cal, rms=0.069492Jy  sigma=1.618849
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0129554 Jy
! Component: 100  -  total flux cleaned = 0.0220307 Jy
! Total flux subtracted in 100 components = 0.0220307 Jy
! Clean residual min=-0.004714 max=0.007091 Jy/beam
! Clean residual mean=0.000000 rms=0.001154 Jy/beam
! Combined flux in latest and established models = 0.205592 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 23 components and 0.205592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065640Jy  sigma=1.520873
! Fit after  self-cal, rms=0.065474Jy  sigma=1.515993
! Inverting map 
! Added new window around map position (1, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00840213 Jy
! Component: 100  -  total flux cleaned = 0.0144214 Jy
! Total flux subtracted in 100 components = 0.0144214 Jy
! Clean residual min=-0.004200 max=0.005668 Jy/beam
! Clean residual mean=0.000000 rms=0.000974 Jy/beam
! Combined flux in latest and established models = 0.220013 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 31 components and 0.220013 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063756Jy  sigma=1.470490
! Fit after  self-cal, rms=0.063658Jy  sigma=1.467707
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8507 mas, bmaj=1.998 mas, bpa=-1.538 degrees
! Estimated noise=0.179489 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00762732 Jy
! Component: 100  -  total flux cleaned = 0.0120556 Jy
! Component: 150  -  total flux cleaned = 0.0149105 Jy
! Component: 200  -  total flux cleaned = 0.0158772 Jy
! Total flux subtracted in 200 components = 0.0158772 Jy
! Clean residual min=-0.003569 max=0.004503 Jy/beam
! Clean residual mean=-0.000002 rms=0.001104 Jy/beam
! Combined flux in latest and established models = 0.235891 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 43 components and 0.23589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062724Jy  sigma=1.442178
! Fit after  self-cal, rms=0.062636Jy  sigma=1.439933
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8507 x 1.998 at -1.538 degrees (North through East)
! Clean map  min=-0.0032929  max=0.13018 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        1.01     KP        0.96     
!   LA        0.97     MK        1.01     NL        1.02     OV        0.95     
!   PT        1.09     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.02     KP        0.98     
!   LA        0.98     MK        1.14     NL        1.06     OV        1.00     
!   PT        1.12     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.02     KP        1.02     
!   LA        0.96     MK        1.05     NL        1.05     OV        1.02     
!   PT        1.14     SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        0.99     KP        0.98     
!   LA        0.94     MK        1.08     NL        1.02     OV        0.97     
!   PT        1.10     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.00     KP        0.96     
!   LA        0.96     MK        1.10     NL        1.03     OV        0.97     
!   PT        1.10     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.04     KP        0.98     
!   LA        0.96     MK        1.04     NL        1.03     OV        0.99     
!   PT        1.13     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.02     KP        1.02     
!   LA        0.98     MK        1.05     NL        1.03     OV        0.99     
!   PT        1.13     SC        1.07     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.02     KP        1.00     
!   LA        0.93     MK        1.05     NL        1.04     OV        0.97     
!   PT        1.14     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        0.98     KP        0.98     
!   LA        0.94     MK        1.07     NL        1.04     OV        1.00     
!   PT        1.11     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.96     HN        0.93     KP        0.96     
!   LA        0.91     MK        0.99     NL        0.98     OV        0.97     
!   PT        1.05     SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        0.95     KP        0.94     
!   LA        0.91     MK        0.99     NL        1.02     OV        0.97     
!   PT        1.07     SC        1.03     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.93     HN        0.93     KP        0.96     
!   LA        0.94     MK        1.00     NL        0.98     OV        0.93     
!   PT        1.00     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.062636Jy  sigma=1.439933
! Fit after  self-cal, rms=0.061663Jy  sigma=1.411782
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8612 mas, bmaj=2.007 mas, bpa=-1.297 degrees
! Estimated noise=0.18033 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000886737 Jy
! Component: 100  -  total flux cleaned = 0.00089473 Jy
! Component: 150  -  total flux cleaned = 0.000899516 Jy
! Component: 200  -  total flux cleaned = 0.000869429 Jy
! Total flux subtracted in 200 components = 0.000869429 Jy
! Clean residual min=-0.002972 max=0.003098 Jy/beam
! Clean residual mean=-0.000002 rms=0.000883 Jy/beam
! Combined flux in latest and established models = 0.23676 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 54 components and 0.23676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061579Jy  sigma=1.409649
! Fit after  self-cal, rms=0.061594Jy  sigma=1.409093
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061594Jy  sigma=1.409093
! Fit after  self-cal, rms=0.061085Jy  sigma=1.398144
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8679 mas, bmaj=2.018 mas, bpa=-1.137 degrees
! Estimated noise=0.179635 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00180501 Jy
! Component: 100  -  total flux cleaned = -0.00217447 Jy
! Component: 150  -  total flux cleaned = -0.0024463 Jy
! Component: 200  -  total flux cleaned = -0.00257725 Jy
! Total flux subtracted in 200 components = -0.00257725 Jy
! Clean residual min=-0.001682 max=0.001811 Jy/beam
! Clean residual mean=-0.000001 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.234183 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 62 components and 0.234183 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061012Jy  sigma=1.396325
! Fit after  self-cal, rms=0.061026Jy  sigma=1.396049
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000165469 Jy
! Component: 100  -  total flux cleaned = 0.00016604 Jy
! Component: 150  -  total flux cleaned = 0.000106016 Jy
! Component: 200  -  total flux cleaned = 6.99128e-05 Jy
! Total flux subtracted in 200 components = 6.99128e-05 Jy
! Clean residual min=-0.001617 max=0.001836 Jy/beam
! Clean residual mean=-0.000001 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.234253 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 63 components and 0.234253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061010Jy  sigma=1.395675
! Fit after  self-cal, rms=0.061008Jy  sigma=1.395623
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061008Jy  sigma=1.395623
! Fit after  self-cal, rms=0.060675Jy  sigma=1.394862
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8706 mas, bmaj=2.023 mas, bpa=-1.114 degrees
! Estimated noise=0.178344 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00140394 Jy
! Component: 100  -  total flux cleaned = -0.00206435 Jy
! Component: 150  -  total flux cleaned = -0.00228527 Jy
! Component: 200  -  total flux cleaned = -0.00241985 Jy
! Total flux subtracted in 200 components = -0.00241985 Jy
! Clean residual min=-0.001563 max=0.001831 Jy/beam
! Clean residual mean=-0.000001 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.231833 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 75 components and 0.231833 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060641Jy  sigma=1.394040
! Fit after  self-cal, rms=0.060642Jy  sigma=1.394013
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (29, 36.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167811 Jy
! Component: 100  -  total flux cleaned = 0.00265283 Jy
! Component: 150  -  total flux cleaned = 0.0033343 Jy
! Component: 200  -  total flux cleaned = 0.00364487 Jy
! Total flux subtracted in 200 components = 0.00364487 Jy
! Clean residual min=-0.001548 max=0.001561 Jy/beam
! Clean residual mean=-0.000000 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.235478 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 108 components and 0.235478 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060594Jy  sigma=1.392600
! Fit after  self-cal, rms=0.060591Jy  sigma=1.392514
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060591Jy  sigma=1.392514
! Fit after  self-cal, rms=0.060196Jy  sigma=1.391949
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.111 mas, bmaj=3.174 mas, bpa=1.797 degrees
! Estimated noise=0.223006 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000269956 Jy
! Component: 100  -  total flux cleaned = 2.39178e-05 Jy
! Component: 150  -  total flux cleaned = 0.00014942 Jy
! Component: 200  -  total flux cleaned = 0.000218855 Jy
! Total flux subtracted in 200 components = 0.000218855 Jy
! Clean residual min=-0.002161 max=0.002377 Jy/beam
! Clean residual mean=-0.000001 rms=0.000644 Jy/beam
! Combined flux in latest and established models = 0.235696 Jy
selfcal
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 145 components and 0.235696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060174Jy  sigma=1.391296
! Fit after  self-cal, rms=0.060172Jy  sigma=1.391252
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000269517 Jy
! Component: 100  -  total flux cleaned = 0.000350739 Jy
! Component: 150  -  total flux cleaned = 0.000402115 Jy
! Component: 200  -  total flux cleaned = 0.000432521 Jy
! Total flux subtracted in 200 components = 0.000432521 Jy
! Clean residual min=-0.002227 max=0.002390 Jy/beam
! Clean residual mean=-0.000001 rms=0.000636 Jy/beam
! Combined flux in latest and established models = 0.236129 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 159 components and 0.236129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060171Jy  sigma=1.391199
! Fit after  self-cal, rms=0.060171Jy  sigma=1.391190
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8717 mas, bmaj=2.026 mas, bpa=-1.169 degrees
! Estimated noise=0.177147 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8717 x 2.026 at -1.169 degrees (North through East)
! Clean map  min=-0.0014439  max=0.12766 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.668 mas, bmaj=1.702 mas, bpa=-3.154 degrees
! Estimated noise=0.350033 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0973539 Jy
! Component: 100  -  total flux cleaned = 0.142618 Jy
! Component: 150  -  total flux cleaned = 0.168989 Jy
! Component: 200  -  total flux cleaned = 0.185514 Jy
! Total flux subtracted in 200 components = 0.185514 Jy
! Clean residual min=-0.005106 max=0.008924 Jy/beam
! Clean residual mean=-0.000001 rms=0.001180 Jy/beam
! Combined flux in latest and established models = 0.185514 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.185514 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8717 mas, bmaj=2.026 mas, bpa=-1.169 degrees
! Estimated noise=0.177147 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169328 Jy
! Component: 100  -  total flux cleaned = 0.0274452 Jy
! Component: 150  -  total flux cleaned = 0.0341373 Jy
! Component: 200  -  total flux cleaned = 0.0384661 Jy
! Total flux subtracted in 200 components = 0.0384661 Jy
! Clean residual min=-0.001980 max=0.003023 Jy/beam
! Clean residual mean=-0.000001 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.22398 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 36 components and 0.22398 Jy
! Inverting map 
! Added new window around map position (-0.8, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00320795 Jy
! Component: 100  -  total flux cleaned = 0.00540782 Jy
! Component: 150  -  total flux cleaned = 0.00642432 Jy
! Component: 200  -  total flux cleaned = 0.00716338 Jy
! Total flux subtracted in 200 components = 0.00716338 Jy
! Clean residual min=-0.001887 max=0.001877 Jy/beam
! Clean residual mean=-0.000001 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.231143 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 59 components and 0.231143 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.111 mas, bmaj=3.174 mas, bpa=1.797 degrees
! Estimated noise=0.223006 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0019932 Jy
! Component: 100  -  total flux cleaned = 0.00281179 Jy
! Component: 150  -  total flux cleaned = 0.00317112 Jy
! Component: 200  -  total flux cleaned = 0.0034662 Jy
! Total flux subtracted in 200 components = 0.0034662 Jy
! Clean residual min=-0.002140 max=0.002353 Jy/beam
! Clean residual mean=-0.000001 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.234609 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000215413 Jy
! Component: 100  -  total flux cleaned = 0.000284355 Jy
! Component: 150  -  total flux cleaned = 0.000305192 Jy
! Component: 200  -  total flux cleaned = 0.000342012 Jy
! Total flux subtracted in 200 components = 0.000342012 Jy
! Clean residual min=-0.002197 max=0.002303 Jy/beam
! Clean residual mean=-0.000001 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.234951 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 112 components and 0.234951 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8717 mas, bmaj=2.026 mas, bpa=-1.169 degrees
! Estimated noise=0.177147 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.06417e-05 Jy
! Component: 100  -  total flux cleaned = -8.94611e-05 Jy
! Component: 150  -  total flux cleaned = -2.11366e-05 Jy
! Component: 200  -  total flux cleaned = 3.87565e-05 Jy
! Total flux subtracted in 200 components = 3.87565e-05 Jy
! Clean residual min=-0.001572 max=0.001659 Jy/beam
! Clean residual mean=-0.000001 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.23499 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 125 components and 0.23499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060192Jy  sigma=1.391518
! Fit after  self-cal, rms=0.060184Jy  sigma=1.391373
wmodel /J1223+0650_X_map.mod
! wmodel: Unable to open new model file: /J1223+0650_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1223+0650_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8717 x 2.026 at -1.169 degrees (North through East)
! Clean map  min=-0.0014565  max=0.1272 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1223+0650_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.127205 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000383381 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.904167 0.904167 1.80833 3.61667 7.23334 14.4667 28.9333 57.8667
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.127 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  331.797 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1223+0650_X_dfm.log closed on Thu May 19 20:18:13 2016