! Started logfile: /scr/pima/bg219b_uvs/J1222+0413_X_uvs.log on Thu Apr  7 01:53:30 2016
obs /scr/pima/bg219b_uvs/J1222+0413_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1222+0413_X_uva.fits
! AN table 1: 25 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.729778 visibilities/baseline/integration-bin.
! Found source: J1222+0413
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 9852 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J1222+0413_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.079761Jy  sigma=24.962902
! Fit after  self-cal, rms=0.605955Jy  sigma=13.915339
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7174 mas, bmaj=1.894 mas, bpa=-4.896 degrees
! Estimated noise=0.715705 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.303337 Jy
! Component: 100  -  total flux cleaned = 0.369931 Jy
! Total flux subtracted in 100 components = 0.369931 Jy
! Clean residual min=-0.011212 max=0.021128 Jy/beam
! Clean residual mean=-0.000002 rms=0.003013 Jy/beam
! Combined flux in latest and established models = 0.369931 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.369931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.081511Jy  sigma=1.840419
! Fit after  self-cal, rms=0.081503Jy  sigma=1.840279
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0236533 Jy
! Component: 100  -  total flux cleaned = 0.0377166 Jy
! Total flux subtracted in 100 components = 0.0377166 Jy
! Clean residual min=-0.009088 max=0.010488 Jy/beam
! Clean residual mean=0.000001 rms=0.002141 Jy/beam
! Combined flux in latest and established models = 0.407647 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 28 components and 0.407647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072599Jy  sigma=1.606835
! Fit after  self-cal, rms=0.072544Jy  sigma=1.605678
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9862 mas, bmaj=2.243 mas, bpa=-2.076 degrees
! Estimated noise=0.481066 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107823 Jy
! Component: 100  -  total flux cleaned = 0.0162248 Jy
! Component: 150  -  total flux cleaned = 0.0192832 Jy
! Component: 200  -  total flux cleaned = 0.021097 Jy
! Total flux subtracted in 200 components = 0.021097 Jy
! Clean residual min=-0.006386 max=0.009832 Jy/beam
! Clean residual mean=0.000005 rms=0.002237 Jy/beam
! Combined flux in latest and established models = 0.428744 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 46 components and 0.428744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.071191Jy  sigma=1.564736
! Fit after  self-cal, rms=0.071168Jy  sigma=1.564306
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9862 x 2.243 at -2.076 degrees (North through East)
! Clean map  min=-0.0059249  max=0.39651 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        1.04     KP        0.96     
!   LA        0.97     MK        0.99     NL        0.99     OV        0.97     
!   PT        1.05     SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.01     KP        0.98     
!   LA        0.99     MK        1.01     NL        1.02     OV        1.01     
!   PT        1.09     SC        1.04     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.02     KP        1.01     
!   LA        0.99     MK        1.01     NL        1.03     OV        0.98     
!   PT        1.10     SC        1.04     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.01     KP        0.95     
!   LA        0.96     MK        1.00     NL        0.99     OV        0.96     
!   PT        1.06     SC        1.00     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.01     KP        0.97     
!   LA        0.98     MK        1.00     NL        1.01     OV        0.98     
!   PT        1.08     SC        1.02     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.02     KP        1.00     
!   LA        1.00     MK        1.02     NL        1.00     OV        0.98     
!   PT        1.08     SC        1.04     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.96     HN        0.99     KP        0.96     
!   LA        0.95     MK        1.00     NL        0.97     OV        0.95     
!   PT        1.08     SC        1.02     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.071168Jy  sigma=1.564306
! Fit after  self-cal, rms=0.068533Jy  sigma=1.489552
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9891 mas, bmaj=2.248 mas, bpa=-2.117 degrees
! Estimated noise=0.481851 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000305259 Jy
! Component: 100  -  total flux cleaned = 0.000177562 Jy
! Component: 150  -  total flux cleaned = 0.000209794 Jy
! Component: 200  -  total flux cleaned = 0.000238162 Jy
! Total flux subtracted in 200 components = 0.000238162 Jy
! Clean residual min=-0.007283 max=0.007829 Jy/beam
! Clean residual mean=0.000006 rms=0.002099 Jy/beam
! Combined flux in latest and established models = 0.428982 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 54 components and 0.428982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068485Jy  sigma=1.488478
! Fit after  self-cal, rms=0.068491Jy  sigma=1.488203
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068491Jy  sigma=1.488203
! Fit after  self-cal, rms=0.066327Jy  sigma=1.437189
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9936 mas, bmaj=2.256 mas, bpa=-2.272 degrees
! Estimated noise=0.481441 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00268273 Jy
! Component: 100  -  total flux cleaned = -0.00365195 Jy
! Component: 150  -  total flux cleaned = -0.00387534 Jy
! Component: 200  -  total flux cleaned = -0.00406585 Jy
! Total flux subtracted in 200 components = -0.00406585 Jy
! Clean residual min=-0.004182 max=0.006510 Jy/beam
! Clean residual mean=0.000002 rms=0.001142 Jy/beam
! Combined flux in latest and established models = 0.424917 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 58 components and 0.424917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.066222Jy  sigma=1.434532
! Fit after  self-cal, rms=0.066225Jy  sigma=1.434304
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (45, 10.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0054174 Jy
! Component: 100  -  total flux cleaned = 0.00795036 Jy
! Component: 150  -  total flux cleaned = 0.00920501 Jy
! Component: 200  -  total flux cleaned = 0.0095758 Jy
! Total flux subtracted in 200 components = 0.0095758 Jy
! Clean residual min=-0.003996 max=0.004785 Jy/beam
! Clean residual mean=0.000001 rms=0.001027 Jy/beam
! Combined flux in latest and established models = 0.434493 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 72 components and 0.434493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065741Jy  sigma=1.424226
! Fit after  self-cal, rms=0.065712Jy  sigma=1.423315
! Inverting map 
! Added new window around map position (-26, -12.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00279791 Jy
! Component: 100  -  total flux cleaned = 0.00284374 Jy
! Component: 150  -  total flux cleaned = 0.00329267 Jy
! Component: 200  -  total flux cleaned = 0.0037811 Jy
! Total flux subtracted in 200 components = 0.0037811 Jy
! Clean residual min=-0.003744 max=0.004045 Jy/beam
! Clean residual mean=0.000001 rms=0.000942 Jy/beam
! Combined flux in latest and established models = 0.438274 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 87 components and 0.438274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065418Jy  sigma=1.417272
! Fit after  self-cal, rms=0.065410Jy  sigma=1.416794
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065410Jy  sigma=1.416794
! Fit after  self-cal, rms=0.065161Jy  sigma=1.414024
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9965 mas, bmaj=2.262 mas, bpa=-2.334 degrees
! Estimated noise=0.480405 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000623231 Jy
! Component: 100  -  total flux cleaned = -0.000401389 Jy
! Component: 150  -  total flux cleaned = -0.000286358 Jy
! Component: 200  -  total flux cleaned = -0.000135557 Jy
! Total flux subtracted in 200 components = -0.000135557 Jy
! Clean residual min=-0.003973 max=0.003997 Jy/beam
! Clean residual mean=0.000000 rms=0.000940 Jy/beam
! Combined flux in latest and established models = 0.438138 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 95 components and 0.438138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065024Jy  sigma=1.411039
! Fit after  self-cal, rms=0.065018Jy  sigma=1.410907
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000123695 Jy
! Component: 100  -  total flux cleaned = 0.000163445 Jy
! Component: 150  -  total flux cleaned = 0.000283502 Jy
! Component: 200  -  total flux cleaned = 0.000467883 Jy
! Total flux subtracted in 200 components = 0.000467883 Jy
! Clean residual min=-0.003923 max=0.003961 Jy/beam
! Clean residual mean=0.000000 rms=0.000932 Jy/beam
! Combined flux in latest and established models = 0.438606 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 102 components and 0.438606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064968Jy  sigma=1.409876
! Fit after  self-cal, rms=0.064965Jy  sigma=1.409831
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064965Jy  sigma=1.409831
! Fit after  self-cal, rms=0.064781Jy  sigma=1.409001
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.187 mas, bmaj=3.331 mas, bpa=1.432 degrees
! Estimated noise=0.572288 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00217127 Jy
! Component: 100  -  total flux cleaned = -0.00170572 Jy
! Component: 150  -  total flux cleaned = -0.00121305 Jy
! Component: 200  -  total flux cleaned = -0.000724662 Jy
! Total flux subtracted in 200 components = -0.000724662 Jy
! Clean residual min=-0.004726 max=0.004608 Jy/beam
! Clean residual mean=0.000000 rms=0.001239 Jy/beam
! Combined flux in latest and established models = 0.437881 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 125 components and 0.437881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064755Jy  sigma=1.408044
! Fit after  self-cal, rms=0.064745Jy  sigma=1.407904
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.55571e-05 Jy
! Component: 100  -  total flux cleaned = 0.000340024 Jy
! Component: 150  -  total flux cleaned = 0.000492964 Jy
! Component: 200  -  total flux cleaned = 0.000606042 Jy
! Total flux subtracted in 200 components = 0.000606042 Jy
! Clean residual min=-0.004679 max=0.004523 Jy/beam
! Clean residual mean=0.000000 rms=0.001232 Jy/beam
! Combined flux in latest and established models = 0.438487 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 135 components and 0.438487 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064744Jy  sigma=1.407746
! Fit after  self-cal, rms=0.064737Jy  sigma=1.407672
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9985 mas, bmaj=2.267 mas, bpa=-2.375 degrees
! Estimated noise=0.479144 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9985 x 2.267 at -2.375 degrees (North through East)
! Clean map  min=-0.0036525  max=0.39396 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7269 mas, bmaj=1.914 mas, bpa=-5.292 degrees
! Estimated noise=0.71971 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.304961 Jy
! Component: 100  -  total flux cleaned = 0.371586 Jy
! Component: 150  -  total flux cleaned = 0.393156 Jy
! Component: 200  -  total flux cleaned = 0.404863 Jy
! Total flux subtracted in 200 components = 0.404863 Jy
! Clean residual min=-0.005755 max=0.007068 Jy/beam
! Clean residual mean=0.000001 rms=0.001460 Jy/beam
! Combined flux in latest and established models = 0.404863 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.404863 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9985 mas, bmaj=2.267 mas, bpa=-2.375 degrees
! Estimated noise=0.479144 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00929379 Jy
! Component: 100  -  total flux cleaned = 0.0154336 Jy
! Component: 150  -  total flux cleaned = 0.0199878 Jy
! Component: 200  -  total flux cleaned = 0.0221465 Jy
! Total flux subtracted in 200 components = 0.0221465 Jy
! Clean residual min=-0.004017 max=0.004883 Jy/beam
! Clean residual mean=0.000001 rms=0.001044 Jy/beam
! Combined flux in latest and established models = 0.427009 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 41 components and 0.427009 Jy
! Inverting map 
! Added new window around map position (-25.8, 21.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00394744 Jy
! Component: 100  -  total flux cleaned = 0.00524255 Jy
! Component: 150  -  total flux cleaned = 0.00652156 Jy
! Component: 200  -  total flux cleaned = 0.00770484 Jy
! Total flux subtracted in 200 components = 0.00770484 Jy
! Clean residual min=-0.003780 max=0.003897 Jy/beam
! Clean residual mean=0.000001 rms=0.000937 Jy/beam
! Combined flux in latest and established models = 0.434714 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 62 components and 0.434714 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.187 mas, bmaj=3.331 mas, bpa=1.432 degrees
! Estimated noise=0.572288 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167118 Jy
! Component: 100  -  total flux cleaned = 0.00279743 Jy
! Component: 150  -  total flux cleaned = 0.00344719 Jy
! Component: 200  -  total flux cleaned = 0.00393163 Jy
! Total flux subtracted in 200 components = 0.00393163 Jy
! Clean residual min=-0.004242 max=0.004409 Jy/beam
! Clean residual mean=0.000002 rms=0.001208 Jy/beam
! Combined flux in latest and established models = 0.438646 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000316923 Jy
! Component: 100  -  total flux cleaned = 0.000534139 Jy
! Component: 150  -  total flux cleaned = 0.000734703 Jy
! Component: 200  -  total flux cleaned = 0.000891866 Jy
! Total flux subtracted in 200 components = 0.000891866 Jy
! Clean residual min=-0.004180 max=0.004369 Jy/beam
! Clean residual mean=0.000001 rms=0.001198 Jy/beam
! Combined flux in latest and established models = 0.439538 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 102 components and 0.439538 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9985 mas, bmaj=2.267 mas, bpa=-2.375 degrees
! Estimated noise=0.479144 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000414133 Jy
! Component: 100  -  total flux cleaned = 0.000513456 Jy
! Component: 150  -  total flux cleaned = 0.000606886 Jy
! Component: 200  -  total flux cleaned = 0.000734082 Jy
! Total flux subtracted in 200 components = 0.000734082 Jy
! Clean residual min=-0.003641 max=0.003881 Jy/beam
! Clean residual mean=0.000001 rms=0.000900 Jy/beam
! Combined flux in latest and established models = 0.440272 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 121 components and 0.440272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064618Jy  sigma=1.404682
! Fit after  self-cal, rms=0.064567Jy  sigma=1.403772
wmodel /scr/pima/bg219b_uvs/J1222+0413_X_map.mod
! Writing 121 model components to file: /scr/pima/bg219b_uvs/J1222+0413_X_map.mod
wobs /scr/pima/bg219b_uvs/J1222+0413_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J1222+0413_X_uvs.fits
wwins /scr/pima/bg219b_uvs/J1222+0413_X_map.win
! wwins: Wrote 4 windows to /scr/pima/bg219b_uvs/J1222+0413_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000846165 Jy
! Component: 100  -  total flux cleaned = 0.00109255 Jy
! Component: 150  -  total flux cleaned = 0.00126665 Jy
! Component: 200  -  total flux cleaned = 0.00143344 Jy
! Component: 250  -  total flux cleaned = 0.00164762 Jy
! Component: 300  -  total flux cleaned = 0.00164801 Jy
! Component: 350  -  total flux cleaned = 0.00184805 Jy
! Component: 400  -  total flux cleaned = 0.00199204 Jy
! Component: 450  -  total flux cleaned = 0.00204008 Jy
! Component: 500  -  total flux cleaned = 0.00213338 Jy
! Component: 550  -  total flux cleaned = 0.0022686 Jy
! Component: 600  -  total flux cleaned = 0.00235712 Jy
! Component: 650  -  total flux cleaned = 0.00240137 Jy
! Component: 700  -  total flux cleaned = 0.00257339 Jy
! Component: 750  -  total flux cleaned = 0.00278344 Jy
! Component: 800  -  total flux cleaned = 0.00290647 Jy
! Component: 850  -  total flux cleaned = 0.00306819 Jy
! Component: 900  -  total flux cleaned = 0.00338563 Jy
! Component: 950  -  total flux cleaned = 0.00350332 Jy
! Component: 1000  -  total flux cleaned = 0.00381019 Jy
! Component: 1050  -  total flux cleaned = 0.00399894 Jy
! Component: 1100  -  total flux cleaned = 0.00425794 Jy
! Component: 1150  -  total flux cleaned = 0.00433068 Jy
! Component: 1200  -  total flux cleaned = 0.00454763 Jy
! Component: 1250  -  total flux cleaned = 0.00476094 Jy
! Component: 1300  -  total flux cleaned = 0.00497129 Jy
! Component: 1350  -  total flux cleaned = 0.00517818 Jy
! Component: 1400  -  total flux cleaned = 0.00534838 Jy
! Component: 1450  -  total flux cleaned = 0.00541567 Jy
! Component: 1500  -  total flux cleaned = 0.00564766 Jy
! Component: 1550  -  total flux cleaned = 0.005811 Jy
! Component: 1600  -  total flux cleaned = 0.00577887 Jy
! Component: 1650  -  total flux cleaned = 0.00600332 Jy
! Component: 1700  -  total flux cleaned = 0.00606649 Jy
! Component: 1750  -  total flux cleaned = 0.00622242 Jy
! Component: 1800  -  total flux cleaned = 0.00634457 Jy
! Component: 1850  -  total flux cleaned = 0.00649639 Jy
! Component: 1900  -  total flux cleaned = 0.00652644 Jy
! Component: 1950  -  total flux cleaned = 0.00664554 Jy
! Component: 2000  -  total flux cleaned = 0.00685131 Jy
! Component: 2050  -  total flux cleaned = 0.0069095 Jy
! Component: 2100  -  total flux cleaned = 0.0070819 Jy
! Component: 2150  -  total flux cleaned = 0.00719565 Jy
! Component: 2200  -  total flux cleaned = 0.00719551 Jy
! Component: 2250  -  total flux cleaned = 0.00727907 Jy
! Component: 2300  -  total flux cleaned = 0.00733437 Jy
! Component: 2350  -  total flux cleaned = 0.00744353 Jy
! Component: 2400  -  total flux cleaned = 0.00747084 Jy
! Component: 2450  -  total flux cleaned = 0.00752445 Jy
! Component: 2500  -  total flux cleaned = 0.00755104 Jy
! Component: 2550  -  total flux cleaned = 0.00760346 Jy
! Component: 2600  -  total flux cleaned = 0.00765586 Jy
! Component: 2650  -  total flux cleaned = 0.00770784 Jy
! Component: 2700  -  total flux cleaned = 0.00781 Jy
! Component: 2750  -  total flux cleaned = 0.00775913 Jy
! Component: 2800  -  total flux cleaned = 0.00778419 Jy
! Component: 2850  -  total flux cleaned = 0.00790883 Jy
! Component: 2900  -  total flux cleaned = 0.00795827 Jy
! Component: 2950  -  total flux cleaned = 0.00808054 Jy
! Component: 3000  -  total flux cleaned = 0.00810472 Jy
! Component: 3050  -  total flux cleaned = 0.00810473 Jy
! Component: 3100  -  total flux cleaned = 0.00808081 Jy
! Component: 3150  -  total flux cleaned = 0.00815201 Jy
! Component: 3200  -  total flux cleaned = 0.00812872 Jy
! Component: 3250  -  total flux cleaned = 0.00822243 Jy
! Component: 3300  -  total flux cleaned = 0.00819941 Jy
! Component: 3350  -  total flux cleaned = 0.00824548 Jy
! Component: 3400  -  total flux cleaned = 0.0081998 Jy
! Component: 3450  -  total flux cleaned = 0.00822232 Jy
! Component: 3500  -  total flux cleaned = 0.00826751 Jy
! Component: 3550  -  total flux cleaned = 0.00824522 Jy
! Component: 3600  -  total flux cleaned = 0.00826737 Jy
! Component: 3650  -  total flux cleaned = 0.00835525 Jy
! Component: 3700  -  total flux cleaned = 0.00835503 Jy
! Component: 3750  -  total flux cleaned = 0.00835487 Jy
! Component: 3800  -  total flux cleaned = 0.0084411 Jy
! Component: 3850  -  total flux cleaned = 0.00839829 Jy
! Component: 3900  -  total flux cleaned = 0.00846221 Jy
! Component: 3950  -  total flux cleaned = 0.00850466 Jy
! Component: 4000  -  total flux cleaned = 0.00850489 Jy
! Component: 4050  -  total flux cleaned = 0.00858831 Jy
! Total flux subtracted in 4096 components = 0.00865055 Jy
! Clean residual min=-0.001073 max=0.001191 Jy/beam
! Clean residual mean=0.000001 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.448922 Jy
keep
! Adding 290 model components to the UV plane model.
! The established model now contains 411 components and 0.448922 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J1222+0413_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9985 x 2.267 at -2.375 degrees (North through East)
! Clean map  min=-0.0022389  max=0.394 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1222+0413_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.394001 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000350808 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.267112 0.267112 0.534225 1.06845 2.1369 4.2738 8.5476 17.0952 34.1904 68.3808
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.394 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1123.12 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1222+0413_X_uvs.log closed on Thu Apr  7 01:53:34 2016