! Started logfile: /scr/pima/bg219b_uvs/J1220+3343_X_dfm.log on Thu May 19 20:17:46 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1220+3343_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1220+3343_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.919854 visibilities/baseline/integration-bin.
! Found source: J1220+3343
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 30300 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1220+3343_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001503Jy  sigma=24.172761
! Fit after  self-cal, rms=0.936091Jy  sigma=22.569143
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8882 mas, bmaj=1.12 mas, bpa=-6.11 degrees
! Estimated noise=0.384668 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0499336 Jy
! Component: 100  -  total flux cleaned = 0.0616777 Jy
! Total flux subtracted in 100 components = 0.0616777 Jy
! Clean residual min=-0.003510 max=0.007663 Jy/beam
! Clean residual mean=-0.000003 rms=0.000839 Jy/beam
! Combined flux in latest and established models = 0.0616777 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0616777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062716Jy  sigma=1.411533
! Fit after  self-cal, rms=0.061833Jy  sigma=1.392990
! Inverting map 
! Added new window around map position (-0.6, -2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00740186 Jy
! Component: 100  -  total flux cleaned = 0.0116993 Jy
! Total flux subtracted in 100 components = 0.0116993 Jy
! Clean residual min=-0.003001 max=0.002955 Jy/beam
! Clean residual mean=-0.000001 rms=0.000661 Jy/beam
! Combined flux in latest and established models = 0.073377 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 19 components and 0.073377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060906Jy  sigma=1.367639
! Fit after  self-cal, rms=0.060832Jy  sigma=1.365859
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.141 mas, bmaj=1.436 mas, bpa=-3.778 degrees
! Estimated noise=0.181465 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00389652 Jy
! Component: 100  -  total flux cleaned = 0.00623894 Jy
! Component: 150  -  total flux cleaned = 0.00777018 Jy
! Component: 200  -  total flux cleaned = 0.00882383 Jy
! Total flux subtracted in 200 components = 0.00882383 Jy
! Clean residual min=-0.002345 max=0.002447 Jy/beam
! Clean residual mean=-0.000000 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 0.0822008 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 35 components and 0.0822008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060574Jy  sigma=1.358655
! Fit after  self-cal, rms=0.060559Jy  sigma=1.358056
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.141 x 1.436 at -3.778 degrees (North through East)
! Clean map  min=-0.0021126  max=0.066394 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.02     KP        0.95     
!   LA        0.96     MK        0.98     NL        1.02     OV        0.96     
!   PT        1.06     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.99     HN        1.06     KP        0.96     
!   LA        1.00     MK        0.98     NL        1.03     OV        0.99     
!   PT        1.14     SC        1.10     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.07     KP        0.99     
!   LA        0.96     MK        0.98     NL        1.04     OV        0.99     
!   PT        1.11     SC        1.11     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.02     KP        0.98     
!   LA        0.94     MK        1.03     NL        1.00     OV        1.00     
!   PT        1.12     SC        1.08     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.02     HN        1.01     KP        0.99     
!   LA        0.94     MK        1.05     NL        0.94     OV        0.92     
!   PT        1.13     SC        1.06     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.98     KP        0.99     
!   LA        0.97     MK        1.01     NL        1.01     OV        0.94     
!   PT        1.10     SC        1.19     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.99     KP        1.03     
!   LA        0.99     MK        1.01     NL        1.00     OV        0.99     
!   PT        1.11     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        0.98     KP        1.03     
!   LA        0.97     MK        1.03     NL        0.96     OV        0.90     
!   PT        1.11     SC        1.09     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.98     KP        1.00     
!   LA        0.89     MK        1.07     NL        1.05     OV        0.91     
!   PT        1.09     SC        1.05     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.94     HN        0.91     KP        1.00     
!   LA        0.93     MK        0.98     NL        1.01     OV        0.97     
!   PT        0.96     SC        1.05     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.96     HN        0.94     KP        0.93     
!   LA        0.92     MK        0.98     NL        0.97     OV        0.94     
!   PT        1.06     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.90     HN        0.86     KP        0.96     
!   LA        0.93     MK        0.92     NL        1.00     OV        0.93     
!   PT        0.99     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.060559Jy  sigma=1.358056
! Fit after  self-cal, rms=0.059931Jy  sigma=1.351373
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.151 mas, bmaj=1.449 mas, bpa=-5.446 degrees
! Estimated noise=0.180142 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000888105 Jy
! Component: 100  -  total flux cleaned = 0.000892631 Jy
! Component: 150  -  total flux cleaned = 0.000910041 Jy
! Component: 200  -  total flux cleaned = 0.000955839 Jy
! Total flux subtracted in 200 components = 0.000955839 Jy
! Clean residual min=-0.001787 max=0.001887 Jy/beam
! Clean residual mean=-0.000001 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.0831566 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 46 components and 0.0831566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059908Jy  sigma=1.350760
! Fit after  self-cal, rms=0.059951Jy  sigma=1.350447
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059951Jy  sigma=1.350447
! Fit after  self-cal, rms=0.060244Jy  sigma=1.345264
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.153 mas, bmaj=1.45 mas, bpa=-4.941 degrees
! Estimated noise=0.17974 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000404954 Jy
! Component: 100  -  total flux cleaned = -0.000490925 Jy
! Component: 150  -  total flux cleaned = -0.000539145 Jy
! Component: 200  -  total flux cleaned = -0.000560662 Jy
! Total flux subtracted in 200 components = -0.000560662 Jy
! Clean residual min=-0.001417 max=0.001773 Jy/beam
! Clean residual mean=-0.000000 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.082596 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 54 components and 0.082596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060237Jy  sigma=1.345111
! Fit after  self-cal, rms=0.060264Jy  sigma=1.344898
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.6, -7.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00182547 Jy
! Component: 100  -  total flux cleaned = 0.0029314 Jy
! Component: 150  -  total flux cleaned = 0.00349103 Jy
! Component: 200  -  total flux cleaned = 0.00368617 Jy
! Total flux subtracted in 200 components = 0.00368617 Jy
! Clean residual min=-0.001230 max=0.001674 Jy/beam
! Clean residual mean=0.000001 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.0862821 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 74 components and 0.0862822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060201Jy  sigma=1.343302
! Fit after  self-cal, rms=0.060196Jy  sigma=1.343166
! Inverting map 
! Added new window around map position (-4.4, -12.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00154951 Jy
! Component: 100  -  total flux cleaned = 0.00238016 Jy
! Component: 150  -  total flux cleaned = 0.0029927 Jy
! Component: 200  -  total flux cleaned = 0.00330849 Jy
! Total flux subtracted in 200 components = 0.00330849 Jy
! Clean residual min=-0.001120 max=0.001277 Jy/beam
! Clean residual mean=-0.000000 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.0895906 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 101 components and 0.0895906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060153Jy  sigma=1.342029
! Fit after  self-cal, rms=0.060151Jy  sigma=1.341936
! Inverting map 
! Added new window around map position (42.2, 42).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105792 Jy
! Component: 100  -  total flux cleaned = 0.00164194 Jy
! Component: 150  -  total flux cleaned = 0.00198717 Jy
! Component: 200  -  total flux cleaned = 0.00231956 Jy
! Total flux subtracted in 200 components = 0.00231956 Jy
! Clean residual min=-0.001100 max=0.001131 Jy/beam
! Clean residual mean=-0.000001 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.0919102 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 111 components and 0.0919102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060128Jy  sigma=1.341351
! Fit after  self-cal, rms=0.060125Jy  sigma=1.341292
! Inverting map 
! Added new window around map position (-2, -33).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000847652 Jy
! Component: 100  -  total flux cleaned = 0.00112825 Jy
! Component: 150  -  total flux cleaned = 0.00144019 Jy
! Component: 200  -  total flux cleaned = 0.00171153 Jy
! Total flux subtracted in 200 components = 0.00171153 Jy
! Clean residual min=-0.001060 max=0.000997 Jy/beam
! Clean residual mean=-0.000001 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.0936217 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 124 components and 0.0936217 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060105Jy  sigma=1.340822
! Fit after  self-cal, rms=0.060103Jy  sigma=1.340785
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060103Jy  sigma=1.340785
! Fit after  self-cal, rms=0.059913Jy  sigma=1.340349
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.152 mas, bmaj=1.45 mas, bpa=-5.196 degrees
! Estimated noise=0.178777 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000431212 Jy
! Component: 100  -  total flux cleaned = 0.000750099 Jy
! Component: 150  -  total flux cleaned = 0.00102181 Jy
! Component: 200  -  total flux cleaned = 0.00120933 Jy
! Total flux subtracted in 200 components = 0.00120933 Jy
! Clean residual min=-0.000997 max=0.000957 Jy/beam
! Clean residual mean=-0.000000 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.094831 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 129 components and 0.094831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059902Jy  sigma=1.340118
! Fit after  self-cal, rms=0.059907Jy  sigma=1.340094
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000255815 Jy
! Component: 100  -  total flux cleaned = 0.000371324 Jy
! Component: 150  -  total flux cleaned = 0.000426147 Jy
! Component: 200  -  total flux cleaned = 0.000504125 Jy
! Total flux subtracted in 200 components = 0.000504125 Jy
! Clean residual min=-0.000980 max=0.000937 Jy/beam
! Clean residual mean=-0.000000 rms=0.000226 Jy/beam
! Combined flux in latest and established models = 0.0953351 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 139 components and 0.0953352 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059901Jy  sigma=1.339959
! Fit after  self-cal, rms=0.059901Jy  sigma=1.339952
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059901Jy  sigma=1.339952
! Fit after  self-cal, rms=0.059940Jy  sigma=1.339723
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.259 mas, bmaj=2.55 mas, bpa=4.129 degrees
! Estimated noise=0.211363 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000483102 Jy
! Component: 100  -  total flux cleaned = 0.000817559 Jy
! Component: 150  -  total flux cleaned = 0.00110102 Jy
! Component: 200  -  total flux cleaned = 0.00129352 Jy
! Total flux subtracted in 200 components = 0.00129352 Jy
! Clean residual min=-0.000980 max=0.001041 Jy/beam
! Clean residual mean=-0.000000 rms=0.000266 Jy/beam
! Combined flux in latest and established models = 0.0966287 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 158 components and 0.0966287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059939Jy  sigma=1.339650
! Fit after  self-cal, rms=0.059942Jy  sigma=1.339628
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000197693 Jy
! Component: 100  -  total flux cleaned = 0.000349825 Jy
! Component: 150  -  total flux cleaned = 0.000480584 Jy
! Component: 200  -  total flux cleaned = 0.000602519 Jy
! Total flux subtracted in 200 components = 0.000602519 Jy
! Clean residual min=-0.000961 max=0.001004 Jy/beam
! Clean residual mean=-0.000000 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.0972312 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 168 components and 0.0972312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059942Jy  sigma=1.339606
! Fit after  self-cal, rms=0.059942Jy  sigma=1.339597
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.152 mas, bmaj=1.45 mas, bpa=-5.143 degrees
! Estimated noise=0.178692 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.152 x 1.45 at -5.143 degrees (North through East)
! Clean map  min=-0.00087255  max=0.065758 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8958 mas, bmaj=1.131 mas, bpa=-6.65 degrees
! Estimated noise=0.379452 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0496152 Jy
! Component: 100  -  total flux cleaned = 0.0621953 Jy
! Component: 150  -  total flux cleaned = 0.0688568 Jy
! Component: 200  -  total flux cleaned = 0.0731743 Jy
! Total flux subtracted in 200 components = 0.0731743 Jy
! Clean residual min=-0.002333 max=0.002439 Jy/beam
! Clean residual mean=-0.000002 rms=0.000561 Jy/beam
! Combined flux in latest and established models = 0.0731743 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0731743 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.152 mas, bmaj=1.45 mas, bpa=-5.143 degrees
! Estimated noise=0.178692 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00353881 Jy
! Component: 100  -  total flux cleaned = 0.00604307 Jy
! Component: 150  -  total flux cleaned = 0.00809797 Jy
! Component: 200  -  total flux cleaned = 0.00983287 Jy
! Total flux subtracted in 200 components = 0.00983287 Jy
! Clean residual min=-0.001429 max=0.001483 Jy/beam
! Clean residual mean=-0.000001 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.0830072 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 37 components and 0.0830072 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.259 mas, bmaj=2.55 mas, bpa=4.129 degrees
! Estimated noise=0.211363 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00224261 Jy
! Component: 100  -  total flux cleaned = 0.00395264 Jy
! Component: 150  -  total flux cleaned = 0.00535512 Jy
! Component: 200  -  total flux cleaned = 0.00655944 Jy
! Total flux subtracted in 200 components = 0.00655944 Jy
! Clean residual min=-0.001338 max=0.001588 Jy/beam
! Clean residual mean=-0.000000 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.0895666 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104908 Jy
! Component: 100  -  total flux cleaned = 0.0019677 Jy
! Component: 150  -  total flux cleaned = 0.00277994 Jy
! Component: 200  -  total flux cleaned = 0.0035068 Jy
! Total flux subtracted in 200 components = 0.0035068 Jy
! Clean residual min=-0.001200 max=0.001341 Jy/beam
! Clean residual mean=-0.000000 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.0930734 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 86 components and 0.0930734 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.152 mas, bmaj=1.45 mas, bpa=-5.143 degrees
! Estimated noise=0.178692 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000850879 Jy
! Component: 100  -  total flux cleaned = 0.00131754 Jy
! Component: 150  -  total flux cleaned = 0.00178043 Jy
! Component: 200  -  total flux cleaned = 0.00205127 Jy
! Total flux subtracted in 200 components = 0.00205127 Jy
! Clean residual min=-0.001043 max=0.001011 Jy/beam
! Clean residual mean=-0.000000 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.0951247 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 112 components and 0.0951247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059988Jy  sigma=1.340615
! Fit after  self-cal, rms=0.059981Jy  sigma=1.340484
wmodel /J1220+3343_X_map.mod
! wmodel: Unable to open new model file: /J1220+3343_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1220+3343_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.152 x 1.45 at -5.143 degrees (North through East)
! Clean map  min=-0.00095074  max=0.065744 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1220+3343_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0657444 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000238087 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.08642 1.08642 2.17285 4.34569 8.69138 17.3828 34.7655 69.5311
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.065 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  276.135 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1220+3343_X_dfm.log closed on Thu May 19 20:17:50 2016