! Started logfile: /scr/pima/bg219b_uvs/J1146+3958_S_dfm.log on Thu May 19 20:17:11 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219b_uvs/J1146+3958_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1146+3958_S_uva.fits
! AN table 1: 22 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.739394 visibilities/baseline/integration-bin.
! Found source: J1146+3958
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 2928 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1146+3958_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.380850Jy  sigma=23.148734
! Fit after  self-cal, rms=0.112463Jy  sigma=1.761856
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.234 mas, bmaj=4.829 mas, bpa=-48.27 degrees
! Estimated noise=1.16901 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.737262 Jy
! Component: 100  -  total flux cleaned = 0.89814 Jy
! Total flux subtracted in 100 components = 0.89814 Jy
! Clean residual min=-0.018434 max=0.046809 Jy/beam
! Clean residual mean=0.000048 rms=0.005939 Jy/beam
! Combined flux in latest and established models = 0.89814 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.89814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118974Jy  sigma=1.983176
! Fit after  self-cal, rms=0.118971Jy  sigma=1.983112
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0449648 Jy
! Component: 100  -  total flux cleaned = 0.0625442 Jy
! Total flux subtracted in 100 components = 0.0625442 Jy
! Clean residual min=-0.014699 max=0.024515 Jy/beam
! Clean residual mean=0.000038 rms=0.004575 Jy/beam
! Combined flux in latest and established models = 0.960684 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 12 components and 0.960684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100253Jy  sigma=1.590586
! Fit after  self-cal, rms=0.100245Jy  sigma=1.590504
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.217 mas, bmaj=6.043 mas, bpa=-52.19 degrees
! Estimated noise=0.842642 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130414 Jy
! Component: 100  -  total flux cleaned = 0.0198639 Jy
! Component: 150  -  total flux cleaned = 0.0237864 Jy
! Component: 200  -  total flux cleaned = 0.0248318 Jy
! Total flux subtracted in 200 components = 0.0248318 Jy
! Clean residual min=-0.013947 max=0.021662 Jy/beam
! Clean residual mean=0.000106 rms=0.004815 Jy/beam
! Combined flux in latest and established models = 0.985516 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 31 components and 0.985516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099146Jy  sigma=1.547433
! Fit after  self-cal, rms=0.099127Jy  sigma=1.547194
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.217 x 6.043 at -52.19 degrees (North through East)
! Clean map  min=-0.01365  max=0.95339 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        0.99     KP        0.96     
!   LA        0.98     MK        1.00     NL        0.98     OV        0.99     
!   PT        1.08     SC        1.04     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.99     KP        1.00     
!   LA        0.97     MK        1.01     NL        0.97     OV        1.01     
!   PT        1.10     SC        1.07     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        0.98     KP        0.98     
!   LA        0.95     MK        1.00     NL        0.99     OV        0.97     
!   PT        1.04     SC        1.03     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.01     KP        0.97     
!   LA        0.96     MK        0.99     NL        1.00     OV        0.98     
!   PT        1.02     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.099127Jy  sigma=1.547194
! Fit after  self-cal, rms=0.089208Jy  sigma=1.379301
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.214 mas, bmaj=6.092 mas, bpa=-52.27 degrees
! Estimated noise=0.840756 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00578191 Jy
! Component: 100  -  total flux cleaned = -0.00812067 Jy
! Component: 150  -  total flux cleaned = -0.00820663 Jy
! Component: 200  -  total flux cleaned = -0.00828347 Jy
! Total flux subtracted in 200 components = -0.00828347 Jy
! Clean residual min=-0.015468 max=0.015645 Jy/beam
! Clean residual mean=0.000105 rms=0.004281 Jy/beam
! Combined flux in latest and established models = 0.977232 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 44 components and 0.977233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088640Jy  sigma=1.376624
! Fit after  self-cal, rms=0.088640Jy  sigma=1.376512
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088640Jy  sigma=1.376512
! Fit after  self-cal, rms=0.082870Jy  sigma=1.264265
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.241 mas, bmaj=6.113 mas, bpa=-52.35 degrees
! Estimated noise=0.832974 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.010112 Jy
! Component: 100  -  total flux cleaned = -0.0154384 Jy
! Component: 150  -  total flux cleaned = -0.018703 Jy
! Component: 200  -  total flux cleaned = -0.0207238 Jy
! Total flux subtracted in 200 components = -0.0207238 Jy
! Clean residual min=-0.008764 max=0.014380 Jy/beam
! Clean residual mean=0.000058 rms=0.003279 Jy/beam
! Combined flux in latest and established models = 0.956509 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 60 components and 0.956509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081263Jy  sigma=1.250261
! Fit after  self-cal, rms=0.081254Jy  sigma=1.250111
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-29.5, -82.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0134485 Jy
! Component: 100  -  total flux cleaned = 0.0202783 Jy
! Component: 150  -  total flux cleaned = 0.0228403 Jy
! Component: 200  -  total flux cleaned = 0.0235182 Jy
! Total flux subtracted in 200 components = 0.0235182 Jy
! Clean residual min=-0.009811 max=0.013748 Jy/beam
! Clean residual mean=0.000074 rms=0.003156 Jy/beam
! Combined flux in latest and established models = 0.980027 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 96 components and 0.980027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078366Jy  sigma=1.220527
! Fit after  self-cal, rms=0.077964Jy  sigma=1.210692
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077964Jy  sigma=1.210692
! Fit after  self-cal, rms=0.074338Jy  sigma=1.166297
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.25 mas, bmaj=6.123 mas, bpa=-52.43 degrees
! Estimated noise=0.829604 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00259579 Jy
! Component: 100  -  total flux cleaned = -0.00273465 Jy
! Component: 150  -  total flux cleaned = -0.00294253 Jy
! Component: 200  -  total flux cleaned = -0.00311931 Jy
! Total flux subtracted in 200 components = -0.00311931 Jy
! Clean residual min=-0.009332 max=0.011730 Jy/beam
! Clean residual mean=0.000049 rms=0.002477 Jy/beam
! Combined flux in latest and established models = 0.976908 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 112 components and 0.976908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073721Jy  sigma=1.162186
! Fit after  self-cal, rms=0.073720Jy  sigma=1.161696
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-123, 40).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105923 Jy
! Component: 100  -  total flux cleaned = 0.0153686 Jy
! Component: 150  -  total flux cleaned = 0.0181986 Jy
! Component: 200  -  total flux cleaned = 0.0196385 Jy
! Total flux subtracted in 200 components = 0.0196385 Jy
! Clean residual min=-0.009252 max=0.009137 Jy/beam
! Clean residual mean=0.000049 rms=0.002325 Jy/beam
! Combined flux in latest and established models = 0.996546 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 131 components and 0.996546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071975Jy  sigma=1.138472
! Fit after  self-cal, rms=0.071899Jy  sigma=1.135692
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071899Jy  sigma=1.135692
! Fit after  self-cal, rms=0.065648Jy  sigma=1.050912
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.495 mas, bmaj=10.28 mas, bpa=-76.67 degrees
! Estimated noise=0.971171 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00575405 Jy
! Component: 100  -  total flux cleaned = -0.00809594 Jy
! Component: 150  -  total flux cleaned = -0.00932538 Jy
! Component: 200  -  total flux cleaned = -0.0100956 Jy
! Total flux subtracted in 200 components = -0.0100956 Jy
! Clean residual min=-0.007348 max=0.007455 Jy/beam
! Clean residual mean=0.000035 rms=0.002202 Jy/beam
! Combined flux in latest and established models = 0.986451 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 172 components and 0.986451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065366Jy  sigma=1.044701
! Fit after  self-cal, rms=0.065305Jy  sigma=1.043694
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00143406 Jy
! Component: 100  -  total flux cleaned = -0.0017353 Jy
! Component: 150  -  total flux cleaned = -0.00198979 Jy
! Component: 200  -  total flux cleaned = -0.00226099 Jy
! Total flux subtracted in 200 components = -0.00226099 Jy
! Clean residual min=-0.007231 max=0.007455 Jy/beam
! Clean residual mean=0.000036 rms=0.002169 Jy/beam
! Combined flux in latest and established models = 0.98419 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 189 components and 0.98419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065244Jy  sigma=1.042357
! Fit after  self-cal, rms=0.065226Jy  sigma=1.042106
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.25 mas, bmaj=6.121 mas, bpa=-52.49 degrees
! Estimated noise=0.8294 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.25 x 6.121 at -52.49 degrees (North through East)
! Clean map  min=-0.0056869  max=0.94014 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065226Jy  sigma=1.042106
! Fit after  self-cal, rms=0.059415Jy  sigma=0.903673
! Inverting map and beam 
! Estimated beam: bmin=4.248 mas, bmaj=6.124 mas, bpa=-52.51 degrees
! Estimated noise=0.828935 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00243854 Jy
! Component: 100  -  total flux cleaned = -0.00376026 Jy
! Component: 150  -  total flux cleaned = -0.00435607 Jy
! Component: 200  -  total flux cleaned = -0.00450218 Jy
! Total flux subtracted in 200 components = -0.00450218 Jy
! Clean residual min=-0.005033 max=0.004878 Jy/beam
! Clean residual mean=0.000020 rms=0.001354 Jy/beam
! Combined flux in latest and established models = 0.979688 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 213 components and 0.979688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059289Jy  sigma=0.900935
! Fit after  self-cal, rms=0.059281Jy  sigma=0.900739
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000620197 Jy
! Component: 100  -  total flux cleaned = -0.00075417 Jy
! Component: 150  -  total flux cleaned = -0.000877036 Jy
! Component: 200  -  total flux cleaned = -0.000953007 Jy
! Total flux subtracted in 200 components = -0.000953007 Jy
! Clean residual min=-0.005054 max=0.004957 Jy/beam
! Clean residual mean=0.000020 rms=0.001342 Jy/beam
! Combined flux in latest and established models = 0.978734 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 219 components and 0.978734 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059225Jy  sigma=0.899670
! Fit after  self-cal, rms=0.059224Jy  sigma=0.899597
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059224Jy  sigma=0.899597
! Fit after  self-cal, rms=0.059175Jy  sigma=0.899074
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.258 mas, bmaj=4.893 mas, bpa=-48.58 degrees
! Estimated noise=1.16181 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.732443 Jy
! Component: 100  -  total flux cleaned = 0.892163 Jy
! Component: 150  -  total flux cleaned = 0.933123 Jy
! Component: 200  -  total flux cleaned = 0.949971 Jy
! Total flux subtracted in 200 components = 0.949971 Jy
! Clean residual min=-0.006425 max=0.010079 Jy/beam
! Clean residual mean=0.000010 rms=0.001895 Jy/beam
! Combined flux in latest and established models = 0.94997 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.94997 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.249 mas, bmaj=6.123 mas, bpa=-52.51 degrees
! Estimated noise=0.828167 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (40.5, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111714 Jy
! Component: 100  -  total flux cleaned = 0.0188159 Jy
! Component: 150  -  total flux cleaned = 0.0244165 Jy
! Component: 200  -  total flux cleaned = 0.0277209 Jy
! Total flux subtracted in 200 components = 0.0277209 Jy
! Clean residual min=-0.004871 max=0.005699 Jy/beam
! Clean residual mean=0.000018 rms=0.001386 Jy/beam
! Combined flux in latest and established models = 0.977691 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 37 components and 0.977691 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.492 mas, bmaj=10.28 mas, bpa=-76.74 degrees
! Estimated noise=0.96971 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00320639 Jy
! Component: 100  -  total flux cleaned = 0.00332226 Jy
! Component: 150  -  total flux cleaned = 0.00314911 Jy
! Component: 200  -  total flux cleaned = 0.00291416 Jy
! Total flux subtracted in 200 components = 0.00291416 Jy
! Clean residual min=-0.005328 max=0.005961 Jy/beam
! Clean residual mean=0.000030 rms=0.001771 Jy/beam
! Combined flux in latest and established models = 0.980605 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.2202e-05 Jy
! Component: 100  -  total flux cleaned = -7.05168e-05 Jy
! Component: 150  -  total flux cleaned = -1.07762e-05 Jy
! Component: 200  -  total flux cleaned = -8.932e-06 Jy
! Total flux subtracted in 200 components = -8.932e-06 Jy
! Clean residual min=-0.005309 max=0.005911 Jy/beam
! Clean residual mean=0.000029 rms=0.001748 Jy/beam
! Combined flux in latest and established models = 0.980597 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 74 components and 0.980597 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.249 mas, bmaj=6.123 mas, bpa=-52.51 degrees
! Estimated noise=0.828167 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000580782 Jy
! Component: 100  -  total flux cleaned = 0.000698696 Jy
! Component: 150  -  total flux cleaned = 0.000697589 Jy
! Component: 200  -  total flux cleaned = 0.000885853 Jy
! Total flux subtracted in 200 components = 0.000885853 Jy
! Clean residual min=-0.004925 max=0.005106 Jy/beam
! Clean residual mean=0.000017 rms=0.001284 Jy/beam
! Combined flux in latest and established models = 0.981483 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 93 components and 0.981483 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059472Jy  sigma=0.901676
! Fit after  self-cal, rms=0.059359Jy  sigma=0.899668
wmodel /J1146+3958_S_map.mod
! wmodel: Unable to open new model file: /J1146+3958_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1146+3958_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.249 x 6.123 at -52.51 degrees (North through East)
! Clean map  min=-0.0047417  max=0.93575 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1146+3958_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.935752 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00127068 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.407376 0.407376 0.814752 1.6295 3.25901 6.51802 13.036 26.0721 52.1442
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0038 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.935 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  736.42 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1146+3958_S_dfm.log closed on Thu May 19 20:17:14 2016