! Started logfile: /scr/pima/bg219b_uvs/J1139-1552_S_uvs.log on Thu Apr  7 01:21:44 2016
obs /scr/pima/bg219b_uvs/J1139-1552_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1139-1552_S_uva.fits
! AN table 1: 48 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.826968 visibilities/baseline/integration-bin.
! Found source: J1139-1552
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 5716 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J1139-1552_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.148339Jy  sigma=19.766653
! Fit after  self-cal, rms=0.460571Jy  sigma=7.997454
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.209 mas, bmaj=10.24 mas, bpa=16.42 degrees
! Estimated noise=0.880463 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.428093 Jy
! Component: 100  -  total flux cleaned = 0.521445 Jy
! Total flux subtracted in 100 components = 0.521445 Jy
! Clean residual min=-0.014436 max=0.026037 Jy/beam
! Clean residual mean=-0.000033 rms=0.004313 Jy/beam
! Combined flux in latest and established models = 0.521445 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.521445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093866Jy  sigma=1.594726
! Fit after  self-cal, rms=0.093865Jy  sigma=1.594695
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0215376 Jy
! Component: 100  -  total flux cleaned = 0.0275322 Jy
! Total flux subtracted in 100 components = 0.0275322 Jy
! Clean residual min=-0.013789 max=0.018495 Jy/beam
! Clean residual mean=-0.000042 rms=0.003820 Jy/beam
! Combined flux in latest and established models = 0.548977 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.548977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089318Jy  sigma=1.524121
! Fit after  self-cal, rms=0.089312Jy  sigma=1.523970
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.95 mas, bmaj=11.51 mas, bpa=14.95 degrees
! Estimated noise=0.553859 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00385949 Jy
! Component: 100  -  total flux cleaned = -0.00406919 Jy
! Component: 150  -  total flux cleaned = -0.00441699 Jy
! Component: 200  -  total flux cleaned = -0.00512205 Jy
! Total flux subtracted in 200 components = -0.00512205 Jy
! Clean residual min=-0.013546 max=0.016226 Jy/beam
! Clean residual mean=-0.000081 rms=0.004246 Jy/beam
! Combined flux in latest and established models = 0.543855 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 28 components and 0.543855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088526Jy  sigma=1.505472
! Fit after  self-cal, rms=0.088524Jy  sigma=1.505434
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.95 x 11.51 at 14.95 degrees (North through East)
! Clean map  min=-0.013374  max=0.55054 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.088524Jy  sigma=1.505434
! Fit after  self-cal, rms=0.088532Jy  sigma=1.505356
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.957 mas, bmaj=11.52 mas, bpa=14.85 degrees
! Estimated noise=0.554382 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000730202 Jy
! Component: 100  -  total flux cleaned = -0.00125678 Jy
! Component: 150  -  total flux cleaned = -0.00172844 Jy
! Component: 200  -  total flux cleaned = -0.00222973 Jy
! Total flux subtracted in 200 components = -0.00222973 Jy
! Clean residual min=-0.013823 max=0.015946 Jy/beam
! Clean residual mean=-0.000081 rms=0.004225 Jy/beam
! Combined flux in latest and established models = 0.541626 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 32 components and 0.541626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088340Jy  sigma=1.501913
! Fit after  self-cal, rms=0.088337Jy  sigma=1.501894
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088337Jy  sigma=1.501894
! Fit after  self-cal, rms=0.083874Jy  sigma=1.476387
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.987 mas, bmaj=11.6 mas, bpa=14.93 degrees
! Estimated noise=0.536829 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0145272 Jy
! Component: 100  -  total flux cleaned = -0.0225555 Jy
! Component: 150  -  total flux cleaned = -0.027625 Jy
! Component: 200  -  total flux cleaned = -0.03091 Jy
! Total flux subtracted in 200 components = -0.03091 Jy
! Clean residual min=-0.011212 max=0.014160 Jy/beam
! Clean residual mean=-0.000070 rms=0.003646 Jy/beam
! Combined flux in latest and established models = 0.510716 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 66 components and 0.510715 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081540Jy  sigma=1.424891
! Fit after  self-cal, rms=0.081542Jy  sigma=1.424832
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00220968 Jy
! Component: 100  -  total flux cleaned = -0.00369025 Jy
! Component: 150  -  total flux cleaned = -0.00470906 Jy
! Component: 200  -  total flux cleaned = -0.00507981 Jy
! Total flux subtracted in 200 components = -0.00507981 Jy
! Clean residual min=-0.011388 max=0.014311 Jy/beam
! Clean residual mean=-0.000069 rms=0.003619 Jy/beam
! Combined flux in latest and established models = 0.505636 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 78 components and 0.505636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081477Jy  sigma=1.423502
! Fit after  self-cal, rms=0.081475Jy  sigma=1.423497
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081475Jy  sigma=1.423497
! Fit after  self-cal, rms=0.080383Jy  sigma=1.409818
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.996 mas, bmaj=11.63 mas, bpa=14.95 degrees
! Estimated noise=0.531117 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00458923 Jy
! Component: 100  -  total flux cleaned = -0.00689426 Jy
! Component: 150  -  total flux cleaned = -0.00826327 Jy
! Component: 200  -  total flux cleaned = -0.00917375 Jy
! Total flux subtracted in 200 components = -0.00917375 Jy
! Clean residual min=-0.010152 max=0.015281 Jy/beam
! Clean residual mean=-0.000059 rms=0.003443 Jy/beam
! Combined flux in latest and established models = 0.496462 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 106 components and 0.496462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080182Jy  sigma=1.404431
! Fit after  self-cal, rms=0.080185Jy  sigma=1.404422
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.5, 80.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140247 Jy
! Component: 100  -  total flux cleaned = 0.0216837 Jy
! Component: 150  -  total flux cleaned = 0.0252777 Jy
! Component: 200  -  total flux cleaned = 0.0260204 Jy
! Total flux subtracted in 200 components = 0.0260204 Jy
! Clean residual min=-0.010373 max=0.014363 Jy/beam
! Clean residual mean=-0.000060 rms=0.003019 Jy/beam
! Combined flux in latest and established models = 0.522482 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 153 components and 0.522482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077442Jy  sigma=1.356460
! Fit after  self-cal, rms=0.077128Jy  sigma=1.349572
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077128Jy  sigma=1.349572
! Fit after  self-cal, rms=0.074985Jy  sigma=1.317715
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.702 mas, bmaj=15.71 mas, bpa=4.846 degrees
! Estimated noise=0.602857 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134548 Jy
! Component: 100  -  total flux cleaned = 0.00300358 Jy
! Component: 150  -  total flux cleaned = 0.00403116 Jy
! Component: 200  -  total flux cleaned = 0.004236 Jy
! Total flux subtracted in 200 components = 0.004236 Jy
! Clean residual min=-0.011897 max=0.015171 Jy/beam
! Clean residual mean=-0.000088 rms=0.003483 Jy/beam
! Combined flux in latest and established models = 0.526718 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 187 components and 0.526718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074446Jy  sigma=1.306158
! Fit after  self-cal, rms=0.074404Jy  sigma=1.304916
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-87.5, 59).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013545 Jy
! Component: 100  -  total flux cleaned = 0.0204993 Jy
! Component: 150  -  total flux cleaned = 0.0228464 Jy
! Component: 200  -  total flux cleaned = 0.0247238 Jy
! Total flux subtracted in 200 components = 0.0247238 Jy
! Clean residual min=-0.009951 max=0.008834 Jy/beam
! Clean residual mean=-0.000062 rms=0.002609 Jy/beam
! Combined flux in latest and established models = 0.551442 Jy
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 246 components and 0.551442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072625Jy  sigma=1.267123
! Fit after  self-cal, rms=0.072425Jy  sigma=1.263153
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.003 mas, bmaj=11.63 mas, bpa=14.89 degrees
! Estimated noise=0.527412 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.003 x 11.63 at 14.89 degrees (North through East)
! Clean map  min=-0.01806  max=0.52497 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072425Jy  sigma=1.263153
! Fit after  self-cal, rms=0.065705Jy  sigma=1.124232
! Inverting map and beam 
! Estimated beam: bmin=3.996 mas, bmaj=11.61 mas, bpa=14.95 degrees
! Estimated noise=0.528981 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00319865 Jy
! Component: 100  -  total flux cleaned = -0.00441971 Jy
! Component: 150  -  total flux cleaned = -0.00508596 Jy
! Component: 200  -  total flux cleaned = -0.00567991 Jy
! Total flux subtracted in 200 components = -0.00567991 Jy
! Clean residual min=-0.004582 max=0.003971 Jy/beam
! Clean residual mean=-0.000010 rms=0.001170 Jy/beam
! Combined flux in latest and established models = 0.545763 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 274 components and 0.545763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065409Jy  sigma=1.118050
! Fit after  self-cal, rms=0.065390Jy  sigma=1.117771
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000912104 Jy
! Component: 100  -  total flux cleaned = -0.0013763 Jy
! Component: 150  -  total flux cleaned = -0.00187628 Jy
! Component: 200  -  total flux cleaned = -0.00220418 Jy
! Total flux subtracted in 200 components = -0.00220418 Jy
! Clean residual min=-0.004364 max=0.003742 Jy/beam
! Clean residual mean=-0.000011 rms=0.001129 Jy/beam
! Combined flux in latest and established models = 0.543558 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 288 components and 0.543558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065248Jy  sigma=1.114953
! Fit after  self-cal, rms=0.065243Jy  sigma=1.114859
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065243Jy  sigma=1.114859
! Fit after  self-cal, rms=0.065130Jy  sigma=1.113174
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.237 mas, bmaj=10.29 mas, bpa=16.43 degrees
! Estimated noise=0.840237 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.40803 Jy
! Component: 100  -  total flux cleaned = 0.497007 Jy
! Component: 150  -  total flux cleaned = 0.519153 Jy
! Component: 200  -  total flux cleaned = 0.522811 Jy
! Total flux subtracted in 200 components = 0.522811 Jy
! Clean residual min=-0.008087 max=0.009406 Jy/beam
! Clean residual mean=-0.000014 rms=0.002293 Jy/beam
! Combined flux in latest and established models = 0.522811 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.522811 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.996 mas, bmaj=11.61 mas, bpa=14.95 degrees
! Estimated noise=0.528819 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00897093 Jy
! Component: 100  -  total flux cleaned = 0.0115727 Jy
! Component: 150  -  total flux cleaned = 0.0137197 Jy
! Component: 200  -  total flux cleaned = 0.0155273 Jy
! Total flux subtracted in 200 components = 0.0155273 Jy
! Clean residual min=-0.005629 max=0.006624 Jy/beam
! Clean residual mean=-0.000020 rms=0.001623 Jy/beam
! Combined flux in latest and established models = 0.538339 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 44 components and 0.538339 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.678 mas, bmaj=15.67 mas, bpa=4.945 degrees
! Estimated noise=0.606116 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00351222 Jy
! Component: 100  -  total flux cleaned = 0.00539497 Jy
! Component: 150  -  total flux cleaned = 0.0064694 Jy
! Component: 200  -  total flux cleaned = 0.00662546 Jy
! Total flux subtracted in 200 components = 0.00662546 Jy
! Clean residual min=-0.004951 max=0.006450 Jy/beam
! Clean residual mean=-0.000025 rms=0.001785 Jy/beam
! Combined flux in latest and established models = 0.544964 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.06716e-07 Jy
! Component: 100  -  total flux cleaned = -0.000126091 Jy
! Component: 150  -  total flux cleaned = -1.1088e-05 Jy
! Component: 200  -  total flux cleaned = 0.000300188 Jy
! Total flux subtracted in 200 components = 0.000300188 Jy
! Clean residual min=-0.004512 max=0.005867 Jy/beam
! Clean residual mean=-0.000024 rms=0.001642 Jy/beam
! Combined flux in latest and established models = 0.545264 Jy
! Adding 76 model components to the UV plane model.
! The established model now contains 114 components and 0.545264 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.996 mas, bmaj=11.61 mas, bpa=14.95 degrees
! Estimated noise=0.528819 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134067 Jy
! Component: 100  -  total flux cleaned = 0.00149745 Jy
! Component: 150  -  total flux cleaned = 0.00202398 Jy
! Component: 200  -  total flux cleaned = 0.0026983 Jy
! Total flux subtracted in 200 components = 0.0026983 Jy
! Clean residual min=-0.003877 max=0.004667 Jy/beam
! Clean residual mean=-0.000013 rms=0.001206 Jy/beam
! Combined flux in latest and established models = 0.547962 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 128 components and 0.547962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065839Jy  sigma=1.123043
! Fit after  self-cal, rms=0.065757Jy  sigma=1.121407
wmodel /scr/pima/bg219b_uvs/J1139-1552_S_map.mod
! Writing 128 model components to file: /scr/pima/bg219b_uvs/J1139-1552_S_map.mod
wobs /scr/pima/bg219b_uvs/J1139-1552_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J1139-1552_S_uvs.fits
wwins /scr/pima/bg219b_uvs/J1139-1552_S_map.win
! wwins: Wrote 3 windows to /scr/pima/bg219b_uvs/J1139-1552_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00189361 Jy
! Component: 100  -  total flux cleaned = 0.00334171 Jy
! Component: 150  -  total flux cleaned = 0.00429988 Jy
! Component: 200  -  total flux cleaned = 0.00482258 Jy
! Component: 250  -  total flux cleaned = 0.00532508 Jy
! Component: 300  -  total flux cleaned = 0.0056904 Jy
! Component: 350  -  total flux cleaned = 0.00592682 Jy
! Component: 400  -  total flux cleaned = 0.00621335 Jy
! Component: 450  -  total flux cleaned = 0.00632324 Jy
! Component: 500  -  total flux cleaned = 0.00637679 Jy
! Component: 550  -  total flux cleaned = 0.00648152 Jy
! Component: 600  -  total flux cleaned = 0.00658328 Jy
! Component: 650  -  total flux cleaned = 0.00678249 Jy
! Component: 700  -  total flux cleaned = 0.00688067 Jy
! Component: 750  -  total flux cleaned = 0.00692945 Jy
! Component: 800  -  total flux cleaned = 0.0072112 Jy
! Component: 850  -  total flux cleaned = 0.00739441 Jy
! Component: 900  -  total flux cleaned = 0.00739422 Jy
! Component: 950  -  total flux cleaned = 0.00748169 Jy
! Component: 1000  -  total flux cleaned = 0.00748179 Jy
! Component: 1050  -  total flux cleaned = 0.00748073 Jy
! Component: 1100  -  total flux cleaned = 0.00739665 Jy
! Component: 1150  -  total flux cleaned = 0.00735475 Jy
! Component: 1200  -  total flux cleaned = 0.00727421 Jy
! Component: 1250  -  total flux cleaned = 0.00731341 Jy
! Component: 1300  -  total flux cleaned = 0.00723499 Jy
! Component: 1350  -  total flux cleaned = 0.007235 Jy
! Component: 1400  -  total flux cleaned = 0.00708372 Jy
! Component: 1450  -  total flux cleaned = 0.00693507 Jy
! Component: 1500  -  total flux cleaned = 0.00689901 Jy
! Component: 1550  -  total flux cleaned = 0.00686297 Jy
! Component: 1600  -  total flux cleaned = 0.00682754 Jy
! Component: 1650  -  total flux cleaned = 0.00668843 Jy
! Component: 1700  -  total flux cleaned = 0.00662078 Jy
! Component: 1750  -  total flux cleaned = 0.00668938 Jy
! Component: 1800  -  total flux cleaned = 0.00668918 Jy
! Component: 1850  -  total flux cleaned = 0.00675482 Jy
! Component: 1900  -  total flux cleaned = 0.00681979 Jy
! Component: 1950  -  total flux cleaned = 0.0066595 Jy
! Component: 2000  -  total flux cleaned = 0.00662776 Jy
! Component: 2050  -  total flux cleaned = 0.00665969 Jy
! Component: 2100  -  total flux cleaned = 0.00656728 Jy
! Component: 2150  -  total flux cleaned = 0.00659755 Jy
! Component: 2200  -  total flux cleaned = 0.00650741 Jy
! Component: 2250  -  total flux cleaned = 0.00647786 Jy
! Component: 2300  -  total flux cleaned = 0.00639044 Jy
! Component: 2350  -  total flux cleaned = 0.00639042 Jy
! Component: 2400  -  total flux cleaned = 0.00627595 Jy
! Component: 2450  -  total flux cleaned = 0.00624809 Jy
! Component: 2500  -  total flux cleaned = 0.00613647 Jy
! Component: 2550  -  total flux cleaned = 0.00613663 Jy
! Component: 2600  -  total flux cleaned = 0.00610914 Jy
! Component: 2650  -  total flux cleaned = 0.0060554 Jy
! Component: 2700  -  total flux cleaned = 0.00605549 Jy
! Component: 2750  -  total flux cleaned = 0.00602969 Jy
! Component: 2800  -  total flux cleaned = 0.00595118 Jy
! Component: 2850  -  total flux cleaned = 0.00592528 Jy
! Component: 2900  -  total flux cleaned = 0.00595077 Jy
! Component: 2950  -  total flux cleaned = 0.00584958 Jy
! Component: 3000  -  total flux cleaned = 0.00589969 Jy
! Component: 3050  -  total flux cleaned = 0.00582544 Jy
! Component: 3100  -  total flux cleaned = 0.00570317 Jy
! Component: 3150  -  total flux cleaned = 0.00558215 Jy
! Component: 3200  -  total flux cleaned = 0.00558209 Jy
! Component: 3250  -  total flux cleaned = 0.00553472 Jy
! Component: 3300  -  total flux cleaned = 0.00553476 Jy
! Component: 3350  -  total flux cleaned = 0.00541782 Jy
! Component: 3400  -  total flux cleaned = 0.00534868 Jy
! Component: 3450  -  total flux cleaned = 0.005463 Jy
! Component: 3500  -  total flux cleaned = 0.00532715 Jy
! Component: 3550  -  total flux cleaned = 0.00532734 Jy
! Component: 3600  -  total flux cleaned = 0.00523843 Jy
! Component: 3650  -  total flux cleaned = 0.00526029 Jy
! Component: 3700  -  total flux cleaned = 0.00521645 Jy
! Component: 3750  -  total flux cleaned = 0.00517284 Jy
! Component: 3800  -  total flux cleaned = 0.00513018 Jy
! Component: 3850  -  total flux cleaned = 0.0051088 Jy
! Component: 3900  -  total flux cleaned = 0.0051093 Jy
! Component: 3950  -  total flux cleaned = 0.00504638 Jy
! Component: 4000  -  total flux cleaned = 0.00500516 Jy
! Component: 4050  -  total flux cleaned = 0.00496406 Jy
! Total flux subtracted in 4096 components = 0.00496416 Jy
! Clean residual min=-0.001114 max=0.001187 Jy/beam
! Clean residual mean=-0.000005 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.552926 Jy
keep
! Adding 329 model components to the UV plane model.
! The established model now contains 457 components and 0.552926 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J1139-1552_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.996 x 11.61 at 14.95 degrees (North through East)
! Clean map  min=-0.012004  max=0.51908 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1139-1552_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.519076 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00040662 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.235006 0.235006 0.470011 0.940023 1.88005 3.76009 7.52018 15.0404 30.0807 60.1614
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.519 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1276.56 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1139-1552_S_uvs.log closed on Thu Apr  7 01:21:49 2016