! Started logfile: /scr/pima/bg219b_uvs/J1125+2610_S_uvs.log on Thu Apr  7 01:21:20 2016
obs /scr/pima/bg219b_uvs/J1125+2610_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1125+2610_S_uva.fits
! AN table 1: 24 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.69213 visibilities/baseline/integration-bin.
! Found source: J1125+2610
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 2392 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J1125+2610_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.346692Jy  sigma=23.448358
! Fit after  self-cal, rms=0.181529Jy  sigma=3.114218
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.569 mas, bmaj=7.013 mas, bpa=22.6 degrees
! Estimated noise=1.17296 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.682258 Jy
! Component: 100  -  total flux cleaned = 0.844513 Jy
! Total flux subtracted in 100 components = 0.844513 Jy
! Clean residual min=-0.026593 max=0.064380 Jy/beam
! Clean residual mean=-0.000014 rms=0.008687 Jy/beam
! Combined flux in latest and established models = 0.844513 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.844513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153331Jy  sigma=2.633911
! Fit after  self-cal, rms=0.153200Jy  sigma=2.631733
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.068004 Jy
! Component: 100  -  total flux cleaned = 0.0998696 Jy
! Total flux subtracted in 100 components = 0.0998696 Jy
! Clean residual min=-0.018240 max=0.032241 Jy/beam
! Clean residual mean=0.000010 rms=0.005828 Jy/beam
! Combined flux in latest and established models = 0.944382 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 14 components and 0.944382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118709Jy  sigma=1.949091
! Fit after  self-cal, rms=0.118021Jy  sigma=1.937166
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.118 mas, bmaj=7.593 mas, bpa=20.13 degrees
! Estimated noise=0.949687 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0213842 Jy
! Component: 100  -  total flux cleaned = 0.0294559 Jy
! Component: 150  -  total flux cleaned = 0.0289965 Jy
! Component: 200  -  total flux cleaned = 0.0286161 Jy
! Total flux subtracted in 200 components = 0.0286161 Jy
! Clean residual min=-0.018635 max=0.033667 Jy/beam
! Clean residual mean=0.000048 rms=0.007341 Jy/beam
! Combined flux in latest and established models = 0.972998 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 29 components and 0.972999 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.115102Jy  sigma=1.853493
! Fit after  self-cal, rms=0.114919Jy  sigma=1.850108
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.118 x 7.593 at 20.13 degrees (North through East)
! Clean map  min=-0.01864  max=0.88912 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.114919Jy  sigma=1.850108
! Fit after  self-cal, rms=0.114399Jy  sigma=1.845092
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.106 mas, bmaj=7.603 mas, bpa=20.12 degrees
! Estimated noise=0.952222 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000853698 Jy
! Component: 100  -  total flux cleaned = 0.000241847 Jy
! Component: 150  -  total flux cleaned = -0.000142533 Jy
! Component: 200  -  total flux cleaned = -0.000714751 Jy
! Total flux subtracted in 200 components = -0.000714751 Jy
! Clean residual min=-0.018578 max=0.032917 Jy/beam
! Clean residual mean=0.000047 rms=0.007208 Jy/beam
! Combined flux in latest and established models = 0.972284 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 38 components and 0.972284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.114028Jy  sigma=1.836328
! Fit after  self-cal, rms=0.113970Jy  sigma=1.835213
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113970Jy  sigma=1.835213
! Fit after  self-cal, rms=0.106540Jy  sigma=1.696043
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.118 mas, bmaj=7.609 mas, bpa=19.89 degrees
! Estimated noise=0.938119 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0111517 Jy
! Component: 100  -  total flux cleaned = -0.016515 Jy
! Component: 150  -  total flux cleaned = -0.0199983 Jy
! Component: 200  -  total flux cleaned = -0.0223054 Jy
! Total flux subtracted in 200 components = -0.0223054 Jy
! Clean residual min=-0.018434 max=0.032811 Jy/beam
! Clean residual mean=0.000033 rms=0.006527 Jy/beam
! Combined flux in latest and established models = 0.949978 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 51 components and 0.949978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104885Jy  sigma=1.685425
! Fit after  self-cal, rms=0.104854Jy  sigma=1.684701
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (38, 36).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0302154 Jy
! Component: 100  -  total flux cleaned = 0.0470977 Jy
! Component: 150  -  total flux cleaned = 0.05187 Jy
! Component: 200  -  total flux cleaned = 0.053681 Jy
! Total flux subtracted in 200 components = 0.053681 Jy
! Clean residual min=-0.015465 max=0.025628 Jy/beam
! Clean residual mean=0.000033 rms=0.005589 Jy/beam
! Combined flux in latest and established models = 1.00366 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 74 components and 1.00366 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093092Jy  sigma=1.532551
! Fit after  self-cal, rms=0.091971Jy  sigma=1.512093
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091971Jy  sigma=1.512093
! Fit after  self-cal, rms=0.091286Jy  sigma=1.490824
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.125 mas, bmaj=7.611 mas, bpa=19.81 degrees
! Estimated noise=0.931478 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00160116 Jy
! Component: 100  -  total flux cleaned = 0.00536873 Jy
! Component: 150  -  total flux cleaned = 0.00687677 Jy
! Component: 200  -  total flux cleaned = 0.00787746 Jy
! Total flux subtracted in 200 components = 0.00787746 Jy
! Clean residual min=-0.014545 max=0.020989 Jy/beam
! Clean residual mean=0.000026 rms=0.005041 Jy/beam
! Combined flux in latest and established models = 1.01154 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 92 components and 1.01154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087693Jy  sigma=1.456089
! Fit after  self-cal, rms=0.087397Jy  sigma=1.451036
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00351577 Jy
! Component: 100  -  total flux cleaned = 0.00413779 Jy
! Component: 150  -  total flux cleaned = 0.0050699 Jy
! Component: 200  -  total flux cleaned = 0.00639117 Jy
! Total flux subtracted in 200 components = 0.00639117 Jy
! Clean residual min=-0.014621 max=0.019667 Jy/beam
! Clean residual mean=0.000025 rms=0.004924 Jy/beam
! Combined flux in latest and established models = 1.01793 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 117 components and 1.01793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086162Jy  sigma=1.441319
! Fit after  self-cal, rms=0.086060Jy  sigma=1.439692
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086060Jy  sigma=1.439692
! Fit after  self-cal, rms=0.078728Jy  sigma=1.332807
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.524 mas, bmaj=9.629 mas, bpa=-1.138 degrees
! Estimated noise=1.14209 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000678439 Jy
! Component: 100  -  total flux cleaned = 0.00050085 Jy
! Component: 150  -  total flux cleaned = 0.00017858 Jy
! Component: 200  -  total flux cleaned = 0.000319509 Jy
! Total flux subtracted in 200 components = 0.000319509 Jy
! Clean residual min=-0.018294 max=0.019246 Jy/beam
! Clean residual mean=0.000041 rms=0.005585 Jy/beam
! Combined flux in latest and established models = 1.01825 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 132 components and 1.01825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078312Jy  sigma=1.324722
! Fit after  self-cal, rms=0.078273Jy  sigma=1.324034
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000306385 Jy
! Component: 100  -  total flux cleaned = -0.000179885 Jy
! Component: 150  -  total flux cleaned = 0.000272954 Jy
! Component: 200  -  total flux cleaned = 0.000580823 Jy
! Total flux subtracted in 200 components = 0.000580823 Jy
! Clean residual min=-0.018219 max=0.019408 Jy/beam
! Clean residual mean=0.000041 rms=0.005535 Jy/beam
! Combined flux in latest and established models = 1.01883 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 147 components and 1.01883 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078143Jy  sigma=1.321566
! Fit after  self-cal, rms=0.078103Jy  sigma=1.321180
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.123 mas, bmaj=7.613 mas, bpa=19.67 degrees
! Estimated noise=0.928699 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.123 x 7.613 at 19.67 degrees (North through East)
! Clean map  min=-0.01207  max=0.8553 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078103Jy  sigma=1.321180
! Fit after  self-cal, rms=0.071962Jy  sigma=1.200590
! Inverting map and beam 
! Estimated beam: bmin=4.123 mas, bmaj=7.612 mas, bpa=19.58 degrees
! Estimated noise=0.929123 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00308488 Jy
! Component: 100  -  total flux cleaned = -0.00418982 Jy
! Component: 150  -  total flux cleaned = -0.00455973 Jy
! Component: 200  -  total flux cleaned = -0.00467961 Jy
! Total flux subtracted in 200 components = -0.00467961 Jy
! Clean residual min=-0.010507 max=0.011557 Jy/beam
! Clean residual mean=0.000016 rms=0.003132 Jy/beam
! Combined flux in latest and established models = 1.01415 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 165 components and 1.01415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071448Jy  sigma=1.188400
! Fit after  self-cal, rms=0.071416Jy  sigma=1.187994
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000688024 Jy
! Component: 100  -  total flux cleaned = -0.000609968 Jy
! Component: 150  -  total flux cleaned = -0.000382026 Jy
! Component: 200  -  total flux cleaned = -0.000244478 Jy
! Total flux subtracted in 200 components = -0.000244478 Jy
! Clean residual min=-0.010302 max=0.011600 Jy/beam
! Clean residual mean=0.000016 rms=0.003113 Jy/beam
! Combined flux in latest and established models = 1.0139 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 179 components and 1.0139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071279Jy  sigma=1.184242
! Fit after  self-cal, rms=0.071267Jy  sigma=1.184144
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071267Jy  sigma=1.184144
! Fit after  self-cal, rms=0.070966Jy  sigma=1.181502
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.578 mas, bmaj=7.006 mas, bpa=22.03 degrees
! Estimated noise=1.15008 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.664814 Jy
! Component: 100  -  total flux cleaned = 0.824021 Jy
! Component: 150  -  total flux cleaned = 0.892492 Jy
! Component: 200  -  total flux cleaned = 0.928861 Jy
! Total flux subtracted in 200 components = 0.928861 Jy
! Clean residual min=-0.013370 max=0.020197 Jy/beam
! Clean residual mean=-0.000007 rms=0.003936 Jy/beam
! Combined flux in latest and established models = 0.928861 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.928861 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.122 mas, bmaj=7.604 mas, bpa=19.57 degrees
! Estimated noise=0.926693 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9, 74).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0268871 Jy
! Component: 100  -  total flux cleaned = 0.0450208 Jy
! Component: 150  -  total flux cleaned = 0.0584924 Jy
! Component: 200  -  total flux cleaned = 0.066596 Jy
! Total flux subtracted in 200 components = 0.066596 Jy
! Clean residual min=-0.011293 max=0.013061 Jy/beam
! Clean residual mean=0.000011 rms=0.003250 Jy/beam
! Combined flux in latest and established models = 0.995457 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 51 components and 0.995457 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.51 mas, bmaj=9.612 mas, bpa=-1.212 degrees
! Estimated noise=1.14135 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013355 Jy
! Component: 100  -  total flux cleaned = 0.0182977 Jy
! Component: 150  -  total flux cleaned = 0.0218126 Jy
! Component: 200  -  total flux cleaned = 0.0241633 Jy
! Total flux subtracted in 200 components = 0.0241633 Jy
! Clean residual min=-0.011858 max=0.014853 Jy/beam
! Clean residual mean=0.000022 rms=0.004156 Jy/beam
! Combined flux in latest and established models = 1.01962 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00154276 Jy
! Component: 100  -  total flux cleaned = 0.00251264 Jy
! Component: 150  -  total flux cleaned = 0.00286109 Jy
! Component: 200  -  total flux cleaned = 0.00303 Jy
! Total flux subtracted in 200 components = 0.00303 Jy
! Clean residual min=-0.011402 max=0.013812 Jy/beam
! Clean residual mean=0.000022 rms=0.003970 Jy/beam
! Combined flux in latest and established models = 1.02265 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 105 components and 1.02265 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.122 mas, bmaj=7.604 mas, bpa=19.57 degrees
! Estimated noise=0.926693 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.57925e-05 Jy
! Component: 100  -  total flux cleaned = 0.000496543 Jy
! Component: 150  -  total flux cleaned = 0.000179725 Jy
! Component: 200  -  total flux cleaned = 0.000327037 Jy
! Total flux subtracted in 200 components = 0.000327037 Jy
! Clean residual min=-0.009887 max=0.010968 Jy/beam
! Clean residual mean=0.000011 rms=0.002698 Jy/beam
! Combined flux in latest and established models = 1.02298 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 133 components and 1.02298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069661Jy  sigma=1.152293
! Fit after  self-cal, rms=0.069176Jy  sigma=1.142338
wmodel /scr/pima/bg219b_uvs/J1125+2610_S_map.mod
! Writing 133 model components to file: /scr/pima/bg219b_uvs/J1125+2610_S_map.mod
wobs /scr/pima/bg219b_uvs/J1125+2610_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J1125+2610_S_uvs.fits
wwins /scr/pima/bg219b_uvs/J1125+2610_S_map.win
! wwins: Wrote 3 windows to /scr/pima/bg219b_uvs/J1125+2610_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00350348 Jy
! Component: 100  -  total flux cleaned = 0.00648761 Jy
! Component: 150  -  total flux cleaned = 0.00897454 Jy
! Component: 200  -  total flux cleaned = 0.0111917 Jy
! Component: 250  -  total flux cleaned = 0.0126144 Jy
! Component: 300  -  total flux cleaned = 0.0137106 Jy
! Component: 350  -  total flux cleaned = 0.0149008 Jy
! Component: 400  -  total flux cleaned = 0.0160497 Jy
! Component: 450  -  total flux cleaned = 0.0167889 Jy
! Component: 500  -  total flux cleaned = 0.0175064 Jy
! Component: 550  -  total flux cleaned = 0.0182046 Jy
! Component: 600  -  total flux cleaned = 0.0188809 Jy
! Component: 650  -  total flux cleaned = 0.0193234 Jy
! Component: 700  -  total flux cleaned = 0.0201837 Jy
! Component: 750  -  total flux cleaned = 0.0209166 Jy
! Component: 800  -  total flux cleaned = 0.0213261 Jy
! Component: 850  -  total flux cleaned = 0.0218235 Jy
! Component: 900  -  total flux cleaned = 0.0223101 Jy
! Component: 950  -  total flux cleaned = 0.0227834 Jy
! Component: 1000  -  total flux cleaned = 0.0228736 Jy
! Component: 1050  -  total flux cleaned = 0.0229656 Jy
! Component: 1100  -  total flux cleaned = 0.0234105 Jy
! Component: 1150  -  total flux cleaned = 0.0234978 Jy
! Component: 1200  -  total flux cleaned = 0.0236705 Jy
! Component: 1250  -  total flux cleaned = 0.0238382 Jy
! Component: 1300  -  total flux cleaned = 0.0241632 Jy
! Component: 1350  -  total flux cleaned = 0.0241612 Jy
! Component: 1400  -  total flux cleaned = 0.0243203 Jy
! Component: 1450  -  total flux cleaned = 0.0246295 Jy
! Component: 1500  -  total flux cleaned = 0.0247054 Jy
! Component: 1550  -  total flux cleaned = 0.0247803 Jy
! Component: 1600  -  total flux cleaned = 0.0249273 Jy
! Component: 1650  -  total flux cleaned = 0.0250708 Jy
! Component: 1700  -  total flux cleaned = 0.0250003 Jy
! Component: 1750  -  total flux cleaned = 0.0254874 Jy
! Component: 1800  -  total flux cleaned = 0.025486 Jy
! Component: 1850  -  total flux cleaned = 0.0254858 Jy
! Component: 1900  -  total flux cleaned = 0.0256848 Jy
! Component: 1950  -  total flux cleaned = 0.0256861 Jy
! Component: 2000  -  total flux cleaned = 0.0258149 Jy
! Component: 2050  -  total flux cleaned = 0.0258142 Jy
! Component: 2100  -  total flux cleaned = 0.0258148 Jy
! Component: 2150  -  total flux cleaned = 0.0258152 Jy
! Component: 2200  -  total flux cleaned = 0.0256935 Jy
! Component: 2250  -  total flux cleaned = 0.0259948 Jy
! Component: 2300  -  total flux cleaned = 0.0258772 Jy
! Component: 2350  -  total flux cleaned = 0.026053 Jy
! Component: 2400  -  total flux cleaned = 0.0261688 Jy
! Component: 2450  -  total flux cleaned = 0.0261683 Jy
! Component: 2500  -  total flux cleaned = 0.0262799 Jy
! Component: 2550  -  total flux cleaned = 0.0263904 Jy
! Component: 2600  -  total flux cleaned = 0.0264445 Jy
! Component: 2650  -  total flux cleaned = 0.0265519 Jy
! Component: 2700  -  total flux cleaned = 0.0263921 Jy
! Component: 2750  -  total flux cleaned = 0.0264974 Jy
! Component: 2800  -  total flux cleaned = 0.0264981 Jy
! Component: 2850  -  total flux cleaned = 0.0266009 Jy
! Component: 2900  -  total flux cleaned = 0.0266509 Jy
! Component: 2950  -  total flux cleaned = 0.0265009 Jy
! Component: 3000  -  total flux cleaned = 0.0265005 Jy
! Component: 3050  -  total flux cleaned = 0.0265491 Jy
! Component: 3100  -  total flux cleaned = 0.0266456 Jy
! Component: 3150  -  total flux cleaned = 0.0265494 Jy
! Component: 3200  -  total flux cleaned = 0.0265966 Jy
! Component: 3250  -  total flux cleaned = 0.0265025 Jy
! Component: 3300  -  total flux cleaned = 0.0264098 Jy
! Component: 3350  -  total flux cleaned = 0.0264551 Jy
! Component: 3400  -  total flux cleaned = 0.0263195 Jy
! Component: 3450  -  total flux cleaned = 0.0262748 Jy
! Component: 3500  -  total flux cleaned = 0.0261866 Jy
! Component: 3550  -  total flux cleaned = 0.0262307 Jy
! Component: 3600  -  total flux cleaned = 0.026231 Jy
! Component: 3650  -  total flux cleaned = 0.0263168 Jy
! Component: 3700  -  total flux cleaned = 0.0262748 Jy
! Component: 3750  -  total flux cleaned = 0.0263596 Jy
! Component: 3800  -  total flux cleaned = 0.0266082 Jy
! Component: 3850  -  total flux cleaned = 0.0266487 Jy
! Component: 3900  -  total flux cleaned = 0.0266886 Jy
! Component: 3950  -  total flux cleaned = 0.0268086 Jy
! Component: 4000  -  total flux cleaned = 0.0268881 Jy
! Component: 4050  -  total flux cleaned = 0.0269665 Jy
! Total flux subtracted in 4096 components = 0.0271227 Jy
! Clean residual min=-0.002037 max=0.002160 Jy/beam
! Clean residual mean=0.000006 rms=0.000772 Jy/beam
! Combined flux in latest and established models = 1.0501 Jy
keep
! Adding 354 model components to the UV plane model.
! The established model now contains 487 components and 1.0501 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J1125+2610_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.122 x 7.604 at 19.57 degrees (North through East)
! Clean map  min=-0.0066302  max=0.85218 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1125+2610_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.852184 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00075297 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.265073 0.265073 0.530146 1.06029 2.12058 4.24117 8.48233 16.9647 33.9293 67.8587
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0022 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.852 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1131.76 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1125+2610_S_uvs.log closed on Thu Apr  7 01:21:24 2016