! Started logfile: /scr/pima/bg219b_uvs/J1120-1420_S_dfm.log on Thu May 19 20:15:34 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219b_uvs/J1120-1420_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1120-1420_S_uva.fits
! AN table 1: 36 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.794753 visibilities/baseline/integration-bin.
! Found source: J1120-1420
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 4120 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1120-1420_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.029469Jy  sigma=19.435438
! Fit after  self-cal, rms=0.742015Jy  sigma=13.999514
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.359 mas, bmaj=10.56 mas, bpa=18.11 degrees
! Estimated noise=0.820602 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.202725 Jy
! Component: 100  -  total flux cleaned = 0.248488 Jy
! Total flux subtracted in 100 components = 0.248488 Jy
! Clean residual min=-0.008838 max=0.016740 Jy/beam
! Clean residual mean=-0.000002 rms=0.002752 Jy/beam
! Combined flux in latest and established models = 0.248488 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.248488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079862Jy  sigma=1.430330
! Fit after  self-cal, rms=0.079855Jy  sigma=1.430087
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0182403 Jy
! Component: 100  -  total flux cleaned = 0.0267744 Jy
! Total flux subtracted in 100 components = 0.0267744 Jy
! Clean residual min=-0.007387 max=0.008947 Jy/beam
! Clean residual mean=-0.000011 rms=0.002145 Jy/beam
! Combined flux in latest and established models = 0.275263 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 20 components and 0.275263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076089Jy  sigma=1.364813
! Fit after  self-cal, rms=0.076062Jy  sigma=1.364074
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.982 mas, bmaj=11.44 mas, bpa=16.46 degrees
! Estimated noise=0.643274 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000966883 Jy
! Component: 100  -  total flux cleaned = -0.00124414 Jy
! Component: 150  -  total flux cleaned = -0.00144213 Jy
! Component: 200  -  total flux cleaned = -0.00190259 Jy
! Total flux subtracted in 200 components = -0.00190259 Jy
! Clean residual min=-0.006974 max=0.008580 Jy/beam
! Clean residual mean=-0.000009 rms=0.002166 Jy/beam
! Combined flux in latest and established models = 0.27336 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 33 components and 0.27336 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075654Jy  sigma=1.355417
! Fit after  self-cal, rms=0.075650Jy  sigma=1.355314
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.982 x 11.44 at 16.46 degrees (North through East)
! Clean map  min=-0.0068745  max=0.26157 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.075650Jy  sigma=1.355314
! Fit after  self-cal, rms=0.075650Jy  sigma=1.355314
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.982 mas, bmaj=11.44 mas, bpa=16.46 degrees
! Estimated noise=0.643274 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000510164 Jy
! Component: 100  -  total flux cleaned = -0.000788348 Jy
! Component: 150  -  total flux cleaned = -0.00103778 Jy
! Component: 200  -  total flux cleaned = -0.00125841 Jy
! Total flux subtracted in 200 components = -0.00125841 Jy
! Clean residual min=-0.006970 max=0.008116 Jy/beam
! Clean residual mean=-0.000008 rms=0.002152 Jy/beam
! Combined flux in latest and established models = 0.272102 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 41 components and 0.272102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075542Jy  sigma=1.353380
! Fit after  self-cal, rms=0.075540Jy  sigma=1.353358
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075540Jy  sigma=1.353358
! Fit after  self-cal, rms=0.072411Jy  sigma=1.345888
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.986 mas, bmaj=11.48 mas, bpa=16.66 degrees
! Estimated noise=0.622048 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00703246 Jy
! Component: 100  -  total flux cleaned = -0.0105531 Jy
! Component: 150  -  total flux cleaned = -0.0127142 Jy
! Component: 200  -  total flux cleaned = -0.0140935 Jy
! Total flux subtracted in 200 components = -0.0140935 Jy
! Clean residual min=-0.006115 max=0.007781 Jy/beam
! Clean residual mean=-0.000010 rms=0.001865 Jy/beam
! Combined flux in latest and established models = 0.258008 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 64 components and 0.258008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071910Jy  sigma=1.328803
! Fit after  self-cal, rms=0.071918Jy  sigma=1.328752
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000721509 Jy
! Component: 100  -  total flux cleaned = -0.00080873 Jy
! Component: 150  -  total flux cleaned = -0.000834748 Jy
! Component: 200  -  total flux cleaned = -0.000902946 Jy
! Total flux subtracted in 200 components = -0.000902946 Jy
! Clean residual min=-0.006032 max=0.007631 Jy/beam
! Clean residual mean=-0.000009 rms=0.001860 Jy/beam
! Combined flux in latest and established models = 0.257105 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 68 components and 0.257105 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071904Jy  sigma=1.328248
! Fit after  self-cal, rms=0.071903Jy  sigma=1.328242
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071903Jy  sigma=1.328242
! Fit after  self-cal, rms=0.071038Jy  sigma=1.315869
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.993 mas, bmaj=11.49 mas, bpa=16.76 degrees
! Estimated noise=0.618063 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00186711 Jy
! Component: 100  -  total flux cleaned = -0.00278477 Jy
! Component: 150  -  total flux cleaned = -0.00313027 Jy
! Component: 200  -  total flux cleaned = -0.00326257 Jy
! Total flux subtracted in 200 components = -0.00326257 Jy
! Clean residual min=-0.004842 max=0.006507 Jy/beam
! Clean residual mean=-0.000005 rms=0.001559 Jy/beam
! Combined flux in latest and established models = 0.253843 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 85 components and 0.253843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071013Jy  sigma=1.314343
! Fit after  self-cal, rms=0.071020Jy  sigma=1.314297
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.7996e-05 Jy
! Component: 100  -  total flux cleaned = -0.000113635 Jy
! Component: 150  -  total flux cleaned = -0.000113762 Jy
! Component: 200  -  total flux cleaned = -8.87301e-05 Jy
! Total flux subtracted in 200 components = -8.87301e-05 Jy
! Clean residual min=-0.004799 max=0.006551 Jy/beam
! Clean residual mean=-0.000005 rms=0.001558 Jy/beam
! Combined flux in latest and established models = 0.253754 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 94 components and 0.253754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071014Jy  sigma=1.314190
! Fit after  self-cal, rms=0.071014Jy  sigma=1.314186
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071014Jy  sigma=1.314186
! Fit after  self-cal, rms=0.070054Jy  sigma=1.303555
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.678 mas, bmaj=15.07 mas, bpa=6.816 degrees
! Estimated noise=0.69671 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0010442 Jy
! Component: 100  -  total flux cleaned = -0.00144756 Jy
! Component: 150  -  total flux cleaned = -0.00168575 Jy
! Component: 200  -  total flux cleaned = -0.00172722 Jy
! Total flux subtracted in 200 components = -0.00172722 Jy
! Clean residual min=-0.005293 max=0.007220 Jy/beam
! Clean residual mean=-0.000011 rms=0.001911 Jy/beam
! Combined flux in latest and established models = 0.252027 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 109 components and 0.252027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070051Jy  sigma=1.303010
! Fit after  self-cal, rms=0.070049Jy  sigma=1.302962
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.83155e-05 Jy
! Component: 100  -  total flux cleaned = -4.03088e-05 Jy
! Component: 150  -  total flux cleaned = -5.16329e-05 Jy
! Component: 200  -  total flux cleaned = -6.27671e-05 Jy
! Total flux subtracted in 200 components = -6.27671e-05 Jy
! Clean residual min=-0.005290 max=0.007235 Jy/beam
! Clean residual mean=-0.000011 rms=0.001911 Jy/beam
! Combined flux in latest and established models = 0.251964 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 114 components and 0.251964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070049Jy  sigma=1.302940
! Fit after  self-cal, rms=0.070049Jy  sigma=1.302938
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.994 mas, bmaj=11.48 mas, bpa=16.75 degrees
! Estimated noise=0.614873 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.994 x 11.48 at 16.75 degrees (North through East)
! Clean map  min=-0.0082591  max=0.25292 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.363 mas, bmaj=10.56 mas, bpa=18.42 degrees
! Estimated noise=0.781808 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.193062 Jy
! Component: 100  -  total flux cleaned = 0.236235 Jy
! Component: 150  -  total flux cleaned = 0.252495 Jy
! Component: 200  -  total flux cleaned = 0.256985 Jy
! Total flux subtracted in 200 components = 0.256985 Jy
! Clean residual min=-0.005186 max=0.006682 Jy/beam
! Clean residual mean=-0.000006 rms=0.001523 Jy/beam
! Combined flux in latest and established models = 0.256985 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.256985 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.994 mas, bmaj=11.48 mas, bpa=16.75 degrees
! Estimated noise=0.614873 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.5, -81.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00452812 Jy
! Component: 100  -  total flux cleaned = 0.00546159 Jy
! Component: 150  -  total flux cleaned = 0.00651208 Jy
! Component: 200  -  total flux cleaned = 0.00751528 Jy
! Total flux subtracted in 200 components = 0.00751528 Jy
! Clean residual min=-0.004172 max=0.005506 Jy/beam
! Clean residual mean=-0.000011 rms=0.001274 Jy/beam
! Combined flux in latest and established models = 0.2645 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 46 components and 0.2645 Jy
! Inverting map 
! Added new window around map position (-4, 79).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00481494 Jy
! Component: 100  -  total flux cleaned = 0.00596497 Jy
! Component: 150  -  total flux cleaned = 0.00743849 Jy
! Component: 200  -  total flux cleaned = 0.00875477 Jy
! Total flux subtracted in 200 components = 0.00875477 Jy
! Clean residual min=-0.003393 max=0.004535 Jy/beam
! Clean residual mean=-0.000013 rms=0.001093 Jy/beam
! Combined flux in latest and established models = 0.273255 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 80 components and 0.273255 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.678 mas, bmaj=15.07 mas, bpa=6.816 degrees
! Estimated noise=0.69671 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140566 Jy
! Component: 100  -  total flux cleaned = 0.00197169 Jy
! Component: 150  -  total flux cleaned = 0.0026423 Jy
! Component: 200  -  total flux cleaned = 0.00330872 Jy
! Total flux subtracted in 200 components = 0.00330872 Jy
! Clean residual min=-0.004162 max=0.005223 Jy/beam
! Clean residual mean=-0.000023 rms=0.001366 Jy/beam
! Combined flux in latest and established models = 0.276564 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000556021 Jy
! Component: 100  -  total flux cleaned = 0.000969931 Jy
! Component: 150  -  total flux cleaned = 0.00135626 Jy
! Component: 200  -  total flux cleaned = 0.0017171 Jy
! Total flux subtracted in 200 components = 0.0017171 Jy
! Clean residual min=-0.004249 max=0.005085 Jy/beam
! Clean residual mean=-0.000024 rms=0.001337 Jy/beam
! Combined flux in latest and established models = 0.278281 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 126 components and 0.278281 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.994 mas, bmaj=11.48 mas, bpa=16.75 degrees
! Estimated noise=0.614873 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147187 Jy
! Component: 100  -  total flux cleaned = 0.00264834 Jy
! Component: 150  -  total flux cleaned = 0.00320133 Jy
! Component: 200  -  total flux cleaned = 0.00360479 Jy
! Total flux subtracted in 200 components = 0.00360479 Jy
! Clean residual min=-0.003422 max=0.004134 Jy/beam
! Clean residual mean=-0.000013 rms=0.001003 Jy/beam
! Combined flux in latest and established models = 0.281886 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 146 components and 0.281886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069425Jy  sigma=1.285988
! Fit after  self-cal, rms=0.069411Jy  sigma=1.285513
wmodel /J1120-1420_S_map.mod
! wmodel: Unable to open new model file: /J1120-1420_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1120-1420_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.994 x 11.48 at 16.75 degrees (North through East)
! Clean map  min=-0.0079518  max=0.2503 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1120-1420_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.250301 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000996155 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.19395 1.19395 2.38789 4.77579 9.55157 19.1031 38.2063 76.4126
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0029 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.25 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  251.267 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1120-1420_S_dfm.log closed on Thu May 19 20:15:36 2016