! Started logfile: /scr/pima/bg219b_uvs/J1114-0816_X_dfm.log on Thu May 19 20:15:06 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J1114-0816_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1114-0816_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.891358 visibilities/baseline/integration-bin.
! Found source: J1114-0816
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17328 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1114-0816_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.036726Jy  sigma=23.154578
! Fit after  self-cal, rms=0.734176Jy  sigma=16.294597
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6666 mas, bmaj=1.692 mas, bpa=-3.069 degrees
! Estimated noise=0.426094 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.196093 Jy
! Component: 100  -  total flux cleaned = 0.247305 Jy
! Total flux subtracted in 100 components = 0.247305 Jy
! Clean residual min=-0.008656 max=0.023081 Jy/beam
! Clean residual mean=0.000039 rms=0.002371 Jy/beam
! Combined flux in latest and established models = 0.247305 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.247305 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085119Jy  sigma=1.834578
! Fit after  self-cal, rms=0.085070Jy  sigma=1.833778
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0266382 Jy
! Component: 100  -  total flux cleaned = 0.0418433 Jy
! Total flux subtracted in 100 components = 0.0418433 Jy
! Clean residual min=-0.005818 max=0.007653 Jy/beam
! Clean residual mean=0.000023 rms=0.001401 Jy/beam
! Combined flux in latest and established models = 0.289148 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.289148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072810Jy  sigma=1.529977
! Fit after  self-cal, rms=0.072724Jy  sigma=1.528412
! Inverting map 
! Added new window around map position (0.8, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00972484 Jy
! Component: 100  -  total flux cleaned = 0.0162718 Jy
! Total flux subtracted in 100 components = 0.0162718 Jy
! Clean residual min=-0.005037 max=0.006095 Jy/beam
! Clean residual mean=0.000017 rms=0.001186 Jy/beam
! Combined flux in latest and established models = 0.30542 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 30 components and 0.30542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070719Jy  sigma=1.476730
! Fit after  self-cal, rms=0.070689Jy  sigma=1.476075
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8555 mas, bmaj=1.991 mas, bpa=-2.483 degrees
! Estimated noise=0.263742 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00705737 Jy
! Component: 100  -  total flux cleaned = 0.0109785 Jy
! Component: 150  -  total flux cleaned = 0.0133352 Jy
! Component: 200  -  total flux cleaned = 0.0148514 Jy
! Total flux subtracted in 200 components = 0.0148514 Jy
! Clean residual min=-0.005215 max=0.006261 Jy/beam
! Clean residual mean=0.000025 rms=0.001542 Jy/beam
! Combined flux in latest and established models = 0.320271 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 47 components and 0.320271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070033Jy  sigma=1.458331
! Fit after  self-cal, rms=0.070022Jy  sigma=1.457912
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8555 x 1.991 at -2.483 degrees (North through East)
! Clean map  min=-0.0050335  max=0.26627 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.01     KP        0.96     
!   LA        0.96     MK        0.99     NL        1.02     OV        0.97     
!   PT        1.08     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        1.01     KP        0.99     
!   LA        0.96     MK        1.01     NL        1.06     OV        1.02     
!   PT        1.08     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        1.05     KP        1.02     
!   LA        0.98     MK        1.01     NL        1.05     OV        1.01     
!   PT        1.13     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.98     KP        0.97     
!   LA        0.95     MK        1.00     NL        1.02     OV        1.00     
!   PT        1.09     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.00     KP        0.97     
!   LA        0.95     MK        0.99     NL        1.00     OV        0.97     
!   PT        1.07     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.01     KP        0.99     
!   LA        0.97     MK        1.03     NL        1.03     OV        0.99     
!   PT        1.11     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.00     KP        1.02     
!   LA        0.98     MK        1.03     NL        1.04     OV        1.04     
!   PT        1.11     SC        1.07     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.99     
!   LA        0.95     MK        1.00     NL        1.01     OV        0.96     
!   PT        1.11     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.01     KP        0.98     
!   LA        0.93     MK        1.00     NL        1.02     OV        1.00     
!   PT        1.07     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.93     KP        0.98     
!   LA        0.91     MK        0.98     NL        0.99     OV        0.97     
!   PT        1.04     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        1.00     KP        0.96     
!   LA        0.92     MK        1.01     NL        0.99     OV        0.98     
!   PT        1.05     SC        0.95     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.94     HN        0.93     KP        0.95     
!   LA        0.93     MK        0.95     NL        0.96     OV        0.94     
!   PT        1.01     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.070022Jy  sigma=1.457912
! Fit after  self-cal, rms=0.067368Jy  sigma=1.404505
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.857 mas, bmaj=1.995 mas, bpa=-2.51 degrees
! Estimated noise=0.263031 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000290218 Jy
! Component: 100  -  total flux cleaned = 0.000361935 Jy
! Component: 150  -  total flux cleaned = 0.000386849 Jy
! Component: 200  -  total flux cleaned = 0.000433215 Jy
! Total flux subtracted in 200 components = 0.000433215 Jy
! Clean residual min=-0.004574 max=0.005330 Jy/beam
! Clean residual mean=0.000029 rms=0.001339 Jy/beam
! Combined flux in latest and established models = 0.320705 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 53 components and 0.320705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067339Jy  sigma=1.403677
! Fit after  self-cal, rms=0.067356Jy  sigma=1.403519
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067356Jy  sigma=1.403519
! Fit after  self-cal, rms=0.065216Jy  sigma=1.355006
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8588 mas, bmaj=1.999 mas, bpa=-2.56 degrees
! Estimated noise=0.262396 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000891312 Jy
! Component: 100  -  total flux cleaned = -0.00118453 Jy
! Component: 150  -  total flux cleaned = -0.00141664 Jy
! Component: 200  -  total flux cleaned = -0.0015132 Jy
! Total flux subtracted in 200 components = -0.0015132 Jy
! Clean residual min=-0.002265 max=0.002955 Jy/beam
! Clean residual mean=0.000009 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.319191 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 58 components and 0.319191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065180Jy  sigma=1.354221
! Fit after  self-cal, rms=0.065197Jy  sigma=1.354073
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (16, -10.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00266865 Jy
! Component: 100  -  total flux cleaned = 0.00411743 Jy
! Component: 150  -  total flux cleaned = 0.00485767 Jy
! Component: 200  -  total flux cleaned = 0.00529949 Jy
! Total flux subtracted in 200 components = 0.00529949 Jy
! Clean residual min=-0.002039 max=0.002030 Jy/beam
! Clean residual mean=0.000006 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.324491 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 81 components and 0.324491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065087Jy  sigma=1.351230
! Fit after  self-cal, rms=0.065081Jy  sigma=1.351112
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065081Jy  sigma=1.351112
! Fit after  self-cal, rms=0.064967Jy  sigma=1.350635
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8607 mas, bmaj=2.002 mas, bpa=-2.543 degrees
! Estimated noise=0.261776 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000604545 Jy
! Component: 100  -  total flux cleaned = -0.000540769 Jy
! Component: 150  -  total flux cleaned = -0.000486804 Jy
! Component: 200  -  total flux cleaned = -0.000508335 Jy
! Total flux subtracted in 200 components = -0.000508335 Jy
! Clean residual min=-0.001955 max=0.001954 Jy/beam
! Clean residual mean=0.000005 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.323983 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 94 components and 0.323983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064938Jy  sigma=1.350018
! Fit after  self-cal, rms=0.064938Jy  sigma=1.349990
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.14243e-05 Jy
! Component: 100  -  total flux cleaned = -2.24762e-05 Jy
! Component: 150  -  total flux cleaned = -2.26593e-05 Jy
! Component: 200  -  total flux cleaned = -2.20538e-05 Jy
! Total flux subtracted in 200 components = -2.20538e-05 Jy
! Clean residual min=-0.001941 max=0.001944 Jy/beam
! Clean residual mean=0.000005 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.323961 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 100 components and 0.323961 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064929Jy  sigma=1.349787
! Fit after  self-cal, rms=0.064929Jy  sigma=1.349776
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064929Jy  sigma=1.349776
! Fit after  self-cal, rms=0.064869Jy  sigma=1.349564
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.16 mas, bmaj=3.726 mas, bpa=3.695 degrees
! Estimated noise=0.335778 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000756773 Jy
! Component: 100  -  total flux cleaned = -0.000714923 Jy
! Component: 150  -  total flux cleaned = -0.000602617 Jy
! Component: 200  -  total flux cleaned = -0.000532659 Jy
! Total flux subtracted in 200 components = -0.000532659 Jy
! Clean residual min=-0.002111 max=0.002714 Jy/beam
! Clean residual mean=0.000009 rms=0.000691 Jy/beam
! Combined flux in latest and established models = 0.323428 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 112 components and 0.323428 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064860Jy  sigma=1.349400
! Fit after  self-cal, rms=0.064856Jy  sigma=1.349244
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.84654e-05 Jy
! Component: 100  -  total flux cleaned = 0.000172261 Jy
! Component: 150  -  total flux cleaned = 0.000219842 Jy
! Component: 200  -  total flux cleaned = 0.000219826 Jy
! Total flux subtracted in 200 components = 0.000219826 Jy
! Clean residual min=-0.002120 max=0.002651 Jy/beam
! Clean residual mean=0.000009 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.323648 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 117 components and 0.323648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064865Jy  sigma=1.349396
! Fit after  self-cal, rms=0.064864Jy  sigma=1.349348
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8621 mas, bmaj=2.004 mas, bpa=-2.545 degrees
! Estimated noise=0.261376 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8621 x 2.004 at -2.545 degrees (North through East)
! Clean map  min=-0.0017204  max=0.26481 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6704 mas, bmaj=1.7 mas, bpa=-3.216 degrees
! Estimated noise=0.424003 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.194897 Jy
! Component: 100  -  total flux cleaned = 0.245793 Jy
! Component: 150  -  total flux cleaned = 0.271915 Jy
! Component: 200  -  total flux cleaned = 0.286617 Jy
! Total flux subtracted in 200 components = 0.286617 Jy
! Clean residual min=-0.003859 max=0.007454 Jy/beam
! Clean residual mean=0.000014 rms=0.000962 Jy/beam
! Combined flux in latest and established models = 0.286617 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.286617 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8621 mas, bmaj=2.004 mas, bpa=-2.545 degrees
! Estimated noise=0.261376 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0129771 Jy
! Component: 100  -  total flux cleaned = 0.0196088 Jy
! Component: 150  -  total flux cleaned = 0.0235373 Jy
! Component: 200  -  total flux cleaned = 0.0263229 Jy
! Total flux subtracted in 200 components = 0.0263229 Jy
! Clean residual min=-0.002284 max=0.002806 Jy/beam
! Clean residual mean=0.000009 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.31294 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 43 components and 0.31294 Jy
! Inverting map 
! Added new window around map position (37.6, -41.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00255927 Jy
! Component: 100  -  total flux cleaned = 0.00425578 Jy
! Component: 150  -  total flux cleaned = 0.00562879 Jy
! Component: 200  -  total flux cleaned = 0.00675533 Jy
! Total flux subtracted in 200 components = 0.00675533 Jy
! Clean residual min=-0.001928 max=0.002109 Jy/beam
! Clean residual mean=0.000005 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.319695 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 82 components and 0.319695 Jy
! Inverting map 
! Added new window around map position (2.2, -1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00188386 Jy
! Component: 100  -  total flux cleaned = 0.00290046 Jy
! Component: 150  -  total flux cleaned = 0.00350771 Jy
! Component: 200  -  total flux cleaned = 0.00374926 Jy
! Total flux subtracted in 200 components = 0.00374926 Jy
! Clean residual min=-0.001784 max=0.001735 Jy/beam
! Clean residual mean=0.000004 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.323444 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 99 components and 0.323444 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.16 mas, bmaj=3.726 mas, bpa=3.695 degrees
! Estimated noise=0.335778 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000937944 Jy
! Component: 100  -  total flux cleaned = 0.000990497 Jy
! Component: 150  -  total flux cleaned = 0.00105502 Jy
! Component: 200  -  total flux cleaned = 0.00115305 Jy
! Total flux subtracted in 200 components = 0.00115305 Jy
! Clean residual min=-0.002012 max=0.002373 Jy/beam
! Clean residual mean=0.000008 rms=0.000626 Jy/beam
! Combined flux in latest and established models = 0.324597 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.93703e-05 Jy
! Component: 100  -  total flux cleaned = 0.000122945 Jy
! Component: 150  -  total flux cleaned = 0.000137853 Jy
! Component: 200  -  total flux cleaned = 0.000168301 Jy
! Total flux subtracted in 200 components = 0.000168301 Jy
! Clean residual min=-0.002003 max=0.002316 Jy/beam
! Clean residual mean=0.000008 rms=0.000621 Jy/beam
! Combined flux in latest and established models = 0.324766 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 122 components and 0.324766 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8621 mas, bmaj=2.004 mas, bpa=-2.545 degrees
! Estimated noise=0.261376 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000498915 Jy
! Component: 100  -  total flux cleaned = -0.000447958 Jy
! Component: 150  -  total flux cleaned = -0.000378162 Jy
! Component: 200  -  total flux cleaned = -0.000334503 Jy
! Total flux subtracted in 200 components = -0.000334503 Jy
! Clean residual min=-0.001693 max=0.001626 Jy/beam
! Clean residual mean=0.000004 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.324431 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 137 components and 0.324431 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064787Jy  sigma=1.347708
! Fit after  self-cal, rms=0.064781Jy  sigma=1.347568
wmodel /J1114-0816_X_map.mod
! wmodel: Unable to open new model file: /J1114-0816_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1114-0816_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8621 x 2.004 at -2.545 degrees (North through East)
! Clean map  min=-0.0016527  max=0.26473 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1114-0816_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.264729 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000408197 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.462583 0.462583 0.925165 1.85033 3.70066 7.40132 14.8026 29.6053 59.2106
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.264 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  648.532 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1114-0816_X_dfm.log closed on Thu May 19 20:15:09 2016