! Started logfile: /scr/pima/bg219b_uvs/J1058-0309_X_uvs.log on Thu Apr  7 01:51:20 2016
obs /scr/pima/bg219b_uvs/J1058-0309_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1058-0309_X_uva.fits
! AN table 1: 51 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.857516 visibilities/baseline/integration-bin.
! Found source: J1058-0309
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 23616 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J1058-0309_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.001216Jy  sigma=24.892091
! Fit after  self-cal, rms=0.920015Jy  sigma=22.865510
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7021 mas, bmaj=1.746 mas, bpa=-2.129 degrees
! Estimated noise=0.391472 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0591697 Jy
! Component: 100  -  total flux cleaned = 0.0775968 Jy
! Total flux subtracted in 100 components = 0.0775968 Jy
! Clean residual min=-0.009107 max=0.031342 Jy/beam
! Clean residual mean=0.000012 rms=0.002593 Jy/beam
! Combined flux in latest and established models = 0.0775968 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0775968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075367Jy  sigma=1.836820
! Fit after  self-cal, rms=0.074466Jy  sigma=1.814323
! Inverting map 
! Added new window around map position (2, -4.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0270698 Jy
! Component: 100  -  total flux cleaned = 0.0386206 Jy
! Total flux subtracted in 100 components = 0.0386206 Jy
! Clean residual min=-0.006644 max=0.012395 Jy/beam
! Clean residual mean=0.000010 rms=0.001665 Jy/beam
! Combined flux in latest and established models = 0.116217 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 14 components and 0.116217 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064732Jy  sigma=1.563814
! Fit after  self-cal, rms=0.063060Jy  sigma=1.522637
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104806 Jy
! Component: 100  -  total flux cleaned = 0.0154772 Jy
! Total flux subtracted in 100 components = 0.0154772 Jy
! Clean residual min=-0.004936 max=0.011157 Jy/beam
! Clean residual mean=0.000009 rms=0.001382 Jy/beam
! Combined flux in latest and established models = 0.131695 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 21 components and 0.131695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061320Jy  sigma=1.477436
! Fit after  self-cal, rms=0.061120Jy  sigma=1.472707
! Inverting map 
! Added new window around map position (4.4, -10.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00986057 Jy
! Component: 100  -  total flux cleaned = 0.0157118 Jy
! Total flux subtracted in 100 components = 0.0157118 Jy
! Clean residual min=-0.005388 max=0.004848 Jy/beam
! Clean residual mean=0.000007 rms=0.001101 Jy/beam
! Combined flux in latest and established models = 0.147406 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 39 components and 0.147406 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059052Jy  sigma=1.413415
! Fit after  self-cal, rms=0.058731Jy  sigma=1.406148
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.869 mas, bmaj=2.065 mas, bpa=-2.772 degrees
! Estimated noise=0.256126 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00790728 Jy
! Component: 100  -  total flux cleaned = 0.0124344 Jy
! Component: 150  -  total flux cleaned = 0.0145801 Jy
! Component: 200  -  total flux cleaned = 0.0160407 Jy
! Total flux subtracted in 200 components = 0.0160407 Jy
! Clean residual min=-0.004480 max=0.004460 Jy/beam
! Clean residual mean=0.000014 rms=0.001121 Jy/beam
! Combined flux in latest and established models = 0.163447 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 63 components and 0.163447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057613Jy  sigma=1.373587
! Fit after  self-cal, rms=0.057399Jy  sigma=1.368130
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.869 x 2.065 at -2.772 degrees (North through East)
! Clean map  min=-0.0043607  max=0.072262 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.99     KP        0.92     
!   LA        0.90     MK        1.01     NL        1.01     OV        0.98     
!   PT        1.04     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.15     HN        0.96     KP        0.90     
!   LA        0.94     MK        1.06     NL        1.04     OV        1.04     
!   PT        1.05     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        1.03     KP        0.92     
!   LA        0.93     MK        1.11     NL        1.03     OV        1.00     
!   PT        1.09     SC        1.09     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.97     KP        0.91     
!   LA        0.89     MK        1.01     NL        1.03     OV        1.04     
!   PT        1.05     SC        1.05     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        1.02     KP        0.94     
!   LA        0.89     MK        1.07     NL        1.07     OV        1.01     
!   PT        1.08     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.02     HN        0.96     KP        0.96     
!   LA        0.93     MK        1.08     NL        1.04     OV        1.00     
!   PT        1.08     SC        1.15     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        0.94     KP        0.95     
!   LA        0.87     MK        1.05     NL        1.01     OV        0.99     
!   PT        1.06     SC        1.03     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057399Jy  sigma=1.368130
! Fit after  self-cal, rms=0.058206Jy  sigma=1.352531
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8833 mas, bmaj=2.102 mas, bpa=-2.96 degrees
! Estimated noise=0.258781 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00179777 Jy
! Component: 100  -  total flux cleaned = 0.00280831 Jy
! Component: 150  -  total flux cleaned = 0.00330001 Jy
! Component: 200  -  total flux cleaned = 0.00363323 Jy
! Total flux subtracted in 200 components = 0.00363323 Jy
! Clean residual min=-0.003193 max=0.003462 Jy/beam
! Clean residual mean=0.000011 rms=0.000871 Jy/beam
! Combined flux in latest and established models = 0.16708 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 69 components and 0.16708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057926Jy  sigma=1.344506
! Fit after  self-cal, rms=0.057918Jy  sigma=1.342601
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057918Jy  sigma=1.342601
! Fit after  self-cal, rms=0.057498Jy  sigma=1.329088
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.886 mas, bmaj=2.111 mas, bpa=-3.094 degrees
! Estimated noise=0.256852 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000388828 Jy
! Component: 100  -  total flux cleaned = -0.000392178 Jy
! Component: 150  -  total flux cleaned = -0.000335453 Jy
! Component: 200  -  total flux cleaned = -0.000335437 Jy
! Total flux subtracted in 200 components = -0.000335437 Jy
! Clean residual min=-0.002243 max=0.002508 Jy/beam
! Clean residual mean=-0.000001 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.166745 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 75 components and 0.166745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057360Jy  sigma=1.325369
! Fit after  self-cal, rms=0.057360Jy  sigma=1.324608
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (25.4, -11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00214493 Jy
! Component: 100  -  total flux cleaned = 0.00252719 Jy
! Component: 150  -  total flux cleaned = 0.00266681 Jy
! Component: 200  -  total flux cleaned = 0.00266771 Jy
! Total flux subtracted in 200 components = 0.00266771 Jy
! Clean residual min=-0.001851 max=0.001973 Jy/beam
! Clean residual mean=-0.000001 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.169413 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 88 components and 0.169413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057248Jy  sigma=1.321722
! Fit after  self-cal, rms=0.057241Jy  sigma=1.321471
! Inverting map 
! Added new window around map position (5.8, -10).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00080824 Jy
! Component: 100  -  total flux cleaned = 0.000481521 Jy
! Component: 150  -  total flux cleaned = 0.000362462 Jy
! Component: 200  -  total flux cleaned = 0.000292016 Jy
! Total flux subtracted in 200 components = 0.000292016 Jy
! Clean residual min=-0.001768 max=0.001703 Jy/beam
! Clean residual mean=-0.000001 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.169705 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 99 components and 0.169705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057161Jy  sigma=1.319373
! Fit after  self-cal, rms=0.057154Jy  sigma=1.319191
! Inverting map 
! Added new window around map position (-10.8, -26.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127058 Jy
! Component: 100  -  total flux cleaned = 0.00158202 Jy
! Component: 150  -  total flux cleaned = 0.00165261 Jy
! Component: 200  -  total flux cleaned = 0.00162052 Jy
! Total flux subtracted in 200 components = 0.00162052 Jy
! Clean residual min=-0.001692 max=0.001546 Jy/beam
! Clean residual mean=-0.000000 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.171325 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 121 components and 0.171325 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057086Jy  sigma=1.317465
! Fit after  self-cal, rms=0.057081Jy  sigma=1.317355
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057081Jy  sigma=1.317355
! Fit after  self-cal, rms=0.056707Jy  sigma=1.313104
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.887 mas, bmaj=2.117 mas, bpa=-3.259 degrees
! Estimated noise=0.254873 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000247322 Jy
! Component: 100  -  total flux cleaned = 0.000317093 Jy
! Component: 150  -  total flux cleaned = 0.000289865 Jy
! Component: 200  -  total flux cleaned = 0.000264451 Jy
! Total flux subtracted in 200 components = 0.000264451 Jy
! Clean residual min=-0.001531 max=0.001327 Jy/beam
! Clean residual mean=-0.000002 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.17159 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 134 components and 0.17159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056674Jy  sigma=1.312299
! Fit after  self-cal, rms=0.056681Jy  sigma=1.312168
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.86137e-05 Jy
! Component: 100  -  total flux cleaned = -2.51661e-05 Jy
! Component: 150  -  total flux cleaned = -9.32253e-05 Jy
! Component: 200  -  total flux cleaned = -0.000157708 Jy
! Total flux subtracted in 200 components = -0.000157708 Jy
! Clean residual min=-0.001514 max=0.001285 Jy/beam
! Clean residual mean=-0.000002 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.171432 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 144 components and 0.171432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056662Jy  sigma=1.311731
! Fit after  self-cal, rms=0.056661Jy  sigma=1.311699
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056661Jy  sigma=1.311699
! Fit after  self-cal, rms=0.056511Jy  sigma=1.311625
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.149 mas, bmaj=3.721 mas, bpa=-0.09616 degrees
! Estimated noise=0.313921 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00049528 Jy
! Component: 100  -  total flux cleaned = 0.000470384 Jy
! Component: 150  -  total flux cleaned = 0.000412057 Jy
! Component: 200  -  total flux cleaned = 0.000340116 Jy
! Total flux subtracted in 200 components = 0.000340116 Jy
! Clean residual min=-0.001405 max=0.001280 Jy/beam
! Clean residual mean=-0.000004 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.171772 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 156 components and 0.171772 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056502Jy  sigma=1.311369
! Fit after  self-cal, rms=0.056502Jy  sigma=1.311309
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.17832e-05 Jy
! Component: 100  -  total flux cleaned = -3.14501e-05 Jy
! Component: 150  -  total flux cleaned = -7.70099e-05 Jy
! Component: 200  -  total flux cleaned = -7.72435e-05 Jy
! Total flux subtracted in 200 components = -7.72435e-05 Jy
! Clean residual min=-0.001316 max=0.001251 Jy/beam
! Clean residual mean=-0.000004 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.171695 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 164 components and 0.171695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056497Jy  sigma=1.311186
! Fit after  self-cal, rms=0.056497Jy  sigma=1.311165
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8873 mas, bmaj=2.118 mas, bpa=-3.295 degrees
! Estimated noise=0.254059 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8873 x 2.118 at -3.295 degrees (North through East)
! Clean map  min=-0.0014264  max=0.068462 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7147 mas, bmaj=1.775 mas, bpa=-2.594 degrees
! Estimated noise=0.394147 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0653552 Jy
! Component: 100  -  total flux cleaned = 0.0954021 Jy
! Component: 150  -  total flux cleaned = 0.113521 Jy
! Component: 200  -  total flux cleaned = 0.126114 Jy
! Total flux subtracted in 200 components = 0.126114 Jy
! Clean residual min=-0.004138 max=0.007081 Jy/beam
! Clean residual mean=0.000003 rms=0.001148 Jy/beam
! Combined flux in latest and established models = 0.126114 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.126114 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8873 mas, bmaj=2.118 mas, bpa=-3.295 degrees
! Estimated noise=0.254059 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0128419 Jy
! Component: 100  -  total flux cleaned = 0.0211527 Jy
! Component: 150  -  total flux cleaned = 0.0270202 Jy
! Component: 200  -  total flux cleaned = 0.0312909 Jy
! Total flux subtracted in 200 components = 0.0312909 Jy
! Clean residual min=-0.002009 max=0.002537 Jy/beam
! Clean residual mean=-0.000000 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.157405 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 49 components and 0.157405 Jy
! Inverting map 
! Added new window around map position (3.6, -10.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00322699 Jy
! Component: 100  -  total flux cleaned = 0.00576548 Jy
! Component: 150  -  total flux cleaned = 0.00781448 Jy
! Component: 200  -  total flux cleaned = 0.00945469 Jy
! Total flux subtracted in 200 components = 0.00945469 Jy
! Clean residual min=-0.001572 max=0.001515 Jy/beam
! Clean residual mean=-0.000002 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.16686 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 76 components and 0.16686 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.149 mas, bmaj=3.721 mas, bpa=-0.09616 degrees
! Estimated noise=0.313921 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0015825 Jy
! Component: 100  -  total flux cleaned = 0.00230491 Jy
! Component: 150  -  total flux cleaned = 0.00280886 Jy
! Component: 200  -  total flux cleaned = 0.00315578 Jy
! Total flux subtracted in 200 components = 0.00315578 Jy
! Clean residual min=-0.001503 max=0.001177 Jy/beam
! Clean residual mean=-0.000005 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.170015 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000400905 Jy
! Component: 100  -  total flux cleaned = 0.000752425 Jy
! Component: 150  -  total flux cleaned = 0.00098722 Jy
! Component: 200  -  total flux cleaned = 0.0010596 Jy
! Total flux subtracted in 200 components = 0.0010596 Jy
! Clean residual min=-0.001379 max=0.001139 Jy/beam
! Clean residual mean=-0.000005 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.171075 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 137 components and 0.171075 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8873 mas, bmaj=2.118 mas, bpa=-3.295 degrees
! Estimated noise=0.254059 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000542851 Jy
! Component: 100  -  total flux cleaned = 0.000948113 Jy
! Component: 150  -  total flux cleaned = 0.00104632 Jy
! Component: 200  -  total flux cleaned = 0.00119191 Jy
! Total flux subtracted in 200 components = 0.00119191 Jy
! Clean residual min=-0.001304 max=0.001288 Jy/beam
! Clean residual mean=-0.000002 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.172267 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 161 components and 0.172267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056525Jy  sigma=1.311666
! Fit after  self-cal, rms=0.056525Jy  sigma=1.311524
wmodel /scr/pima/bg219b_uvs/J1058-0309_X_map.mod
! Writing 161 model components to file: /scr/pima/bg219b_uvs/J1058-0309_X_map.mod
wobs /scr/pima/bg219b_uvs/J1058-0309_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219b_uvs/J1058-0309_X_uvs.fits
wwins /scr/pima/bg219b_uvs/J1058-0309_X_map.win
! wwins: Wrote 7 windows to /scr/pima/bg219b_uvs/J1058-0309_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000442879 Jy
! Component: 100  -  total flux cleaned = -0.000733445 Jy
! Component: 150  -  total flux cleaned = -0.000942867 Jy
! Component: 200  -  total flux cleaned = -0.00108151 Jy
! Component: 250  -  total flux cleaned = -0.00110094 Jy
! Component: 300  -  total flux cleaned = -0.0011011 Jy
! Component: 350  -  total flux cleaned = -0.00110112 Jy
! Component: 400  -  total flux cleaned = -0.00110134 Jy
! Component: 450  -  total flux cleaned = -0.00111816 Jy
! Component: 500  -  total flux cleaned = -0.00115089 Jy
! Component: 550  -  total flux cleaned = -0.00119873 Jy
! Component: 600  -  total flux cleaned = -0.00123021 Jy
! Component: 650  -  total flux cleaned = -0.0013218 Jy
! Component: 700  -  total flux cleaned = -0.0013963 Jy
! Component: 750  -  total flux cleaned = -0.00148419 Jy
! Component: 800  -  total flux cleaned = -0.00154183 Jy
! Component: 850  -  total flux cleaned = -0.00162672 Jy
! Component: 900  -  total flux cleaned = -0.00168246 Jy
! Component: 950  -  total flux cleaned = -0.00180541 Jy
! Component: 1000  -  total flux cleaned = -0.00188582 Jy
! Component: 1050  -  total flux cleaned = -0.00197815 Jy
! Component: 1100  -  total flux cleaned = -0.0020174 Jy
! Component: 1150  -  total flux cleaned = -0.00209463 Jy
! Component: 1200  -  total flux cleaned = -0.00211993 Jy
! Component: 1250  -  total flux cleaned = -0.00215765 Jy
! Component: 1300  -  total flux cleaned = -0.0022563 Jy
! Component: 1350  -  total flux cleaned = -0.0022564 Jy
! Component: 1400  -  total flux cleaned = -0.00226845 Jy
! Component: 1450  -  total flux cleaned = -0.00226831 Jy
! Component: 1500  -  total flux cleaned = -0.00225652 Jy
! Component: 1550  -  total flux cleaned = -0.00225653 Jy
! Component: 1600  -  total flux cleaned = -0.00224494 Jy
! Component: 1650  -  total flux cleaned = -0.00221125 Jy
! Component: 1700  -  total flux cleaned = -0.00226759 Jy
! Component: 1750  -  total flux cleaned = -0.00225643 Jy
! Component: 1800  -  total flux cleaned = -0.00225638 Jy
! Component: 1850  -  total flux cleaned = -0.00231077 Jy
! Component: 1900  -  total flux cleaned = -0.00226736 Jy
! Component: 1950  -  total flux cleaned = -0.00225659 Jy
! Component: 2000  -  total flux cleaned = -0.00224597 Jy
! Component: 2050  -  total flux cleaned = -0.00226694 Jy
! Component: 2100  -  total flux cleaned = -0.00224623 Jy
! Component: 2150  -  total flux cleaned = -0.00228744 Jy
! Component: 2200  -  total flux cleaned = -0.00226701 Jy
! Component: 2250  -  total flux cleaned = -0.0022871 Jy
! Component: 2300  -  total flux cleaned = -0.00229702 Jy
! Component: 2350  -  total flux cleaned = -0.00232672 Jy
! Component: 2400  -  total flux cleaned = -0.00230707 Jy
! Component: 2450  -  total flux cleaned = -0.00231689 Jy
! Component: 2500  -  total flux cleaned = -0.00236524 Jy
! Component: 2550  -  total flux cleaned = -0.0024227 Jy
! Component: 2600  -  total flux cleaned = -0.00244162 Jy
! Component: 2650  -  total flux cleaned = -0.00242289 Jy
! Component: 2700  -  total flux cleaned = -0.00246956 Jy
! Component: 2750  -  total flux cleaned = -0.00247883 Jy
! Component: 2800  -  total flux cleaned = -0.00251571 Jy
! Component: 2850  -  total flux cleaned = -0.00252482 Jy
! Component: 2900  -  total flux cleaned = -0.00251575 Jy
! Component: 2950  -  total flux cleaned = -0.00255177 Jy
! Component: 3000  -  total flux cleaned = -0.0025696 Jy
! Component: 3050  -  total flux cleaned = -0.00257837 Jy
! Component: 3100  -  total flux cleaned = -0.00259602 Jy
! Component: 3150  -  total flux cleaned = -0.00263109 Jy
! Component: 3200  -  total flux cleaned = -0.00265715 Jy
! Component: 3250  -  total flux cleaned = -0.0026658 Jy
! Component: 3300  -  total flux cleaned = -0.0027002 Jy
! Component: 3350  -  total flux cleaned = -0.00272567 Jy
! Component: 3400  -  total flux cleaned = -0.00275106 Jy
! Component: 3450  -  total flux cleaned = -0.00278466 Jy
! Component: 3500  -  total flux cleaned = -0.00277627 Jy
! Component: 3550  -  total flux cleaned = -0.00278461 Jy
! Component: 3600  -  total flux cleaned = -0.00279286 Jy
! Component: 3650  -  total flux cleaned = -0.00280927 Jy
! Component: 3700  -  total flux cleaned = -0.00280931 Jy
! Component: 3750  -  total flux cleaned = -0.0028498 Jy
! Component: 3800  -  total flux cleaned = -0.00289001 Jy
! Component: 3850  -  total flux cleaned = -0.00288198 Jy
! Component: 3900  -  total flux cleaned = -0.00287412 Jy
! Component: 3950  -  total flux cleaned = -0.00292161 Jy
! Component: 4000  -  total flux cleaned = -0.00292942 Jy
! Component: 4050  -  total flux cleaned = -0.00292932 Jy
! Total flux subtracted in 4096 components = -0.00296031 Jy
! Clean residual min=-0.000435 max=0.000457 Jy/beam
! Clean residual mean=-0.000000 rms=0.000129 Jy/beam
! Combined flux in latest and established models = 0.169307 Jy
keep
! Adding 267 model components to the UV plane model.
! The established model now contains 428 components and 0.169307 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219b_uvs/J1058-0309_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8873 x 2.118 at -3.295 degrees (North through East)
! Clean map  min=-0.0012336  max=0.068023 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1058-0309_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0680225 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000128001 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.564523 0.564523 1.12905 2.25809 4.51618 9.03237 18.0647 36.1295 72.2589
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.068 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  531.422 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1058-0309_X_uvs.log closed on Thu Apr  7 01:51:26 2016