! Started logfile: /scr/pima/bg219b_uvs/J1033-2536_S_dfm.log on Thu May 19 20:12:53 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219b_uvs/J1033-2536_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1033-2536_S_uva.fits
! AN table 1: 62 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.693548 visibilities/baseline/integration-bin.
! Found source: J1033-2536
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 3612 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1033-2536_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004638Jy  sigma=20.339754
! Fit after  self-cal, rms=0.951656Jy  sigma=19.347217
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.12 mas, bmaj=23.06 mas, bpa=-4.177 degrees
! Estimated noise=0.896255 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0400867 Jy
! Component: 100  -  total flux cleaned = 0.0488555 Jy
! Total flux subtracted in 100 components = 0.0488555 Jy
! Clean residual min=-0.004108 max=0.004509 Jy/beam
! Clean residual mean=0.000004 rms=0.001275 Jy/beam
! Combined flux in latest and established models = 0.0488555 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0488555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060646Jy  sigma=1.170959
! Fit after  self-cal, rms=0.058986Jy  sigma=1.134559
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.15 mas, bmaj=24.58 mas, bpa=0.03134 degrees
! Estimated noise=0.644082 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0025601 Jy
! Component: 100  -  total flux cleaned = 0.00267587 Jy
! Component: 150  -  total flux cleaned = 0.00250686 Jy
! Component: 200  -  total flux cleaned = 0.00235807 Jy
! Total flux subtracted in 200 components = 0.00235807 Jy
! Clean residual min=-0.003178 max=0.003545 Jy/beam
! Clean residual mean=-0.000001 rms=0.001008 Jy/beam
! Combined flux in latest and established models = 0.0512135 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 35 components and 0.0512135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058855Jy  sigma=1.132632
! Fit after  self-cal, rms=0.058831Jy  sigma=1.132509
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.15 x 24.58 at 0.03134 degrees (North through East)
! Clean map  min=-0.0031625  max=0.052177 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     KP        0.95     LA        0.87     
!   NL        1.03     OV        1.12     PT        1.11     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        0.94     KP        1.08     LA        0.92     
!   NL        0.90     OV        1.06     PT        1.11     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.86     KP        1.14     LA        0.96     
!   NL        0.84     OV        1.02     PT        1.08     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.86     KP        1.03     LA        1.02     
!   NL        0.96     OV        0.90     PT        0.97     
! 
! 
! Fit before self-cal, rms=0.058831Jy  sigma=1.132509
! Fit after  self-cal, rms=0.057555Jy  sigma=1.124306
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.02 mas, bmaj=24.63 mas, bpa=-0.4045 degrees
! Estimated noise=0.63917 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000253673 Jy
! Component: 100  -  total flux cleaned = 0.000284768 Jy
! Component: 150  -  total flux cleaned = 0.000308956 Jy
! Component: 200  -  total flux cleaned = 0.000271382 Jy
! Total flux subtracted in 200 components = 0.000271382 Jy
! Clean residual min=-0.002982 max=0.002813 Jy/beam
! Clean residual mean=0.000004 rms=0.000863 Jy/beam
! Combined flux in latest and established models = 0.0514849 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 55 components and 0.0514849 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057530Jy  sigma=1.123899
! Fit after  self-cal, rms=0.057673Jy  sigma=1.122512
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057673Jy  sigma=1.122512
! Fit after  self-cal, rms=0.059298Jy  sigma=1.121475
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.04 mas, bmaj=24.76 mas, bpa=-0.3578 degrees
! Estimated noise=0.650422 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000127986 Jy
! Component: 100  -  total flux cleaned = 0.000127878 Jy
! Component: 150  -  total flux cleaned = 0.000109746 Jy
! Component: 200  -  total flux cleaned = 0.00014595 Jy
! Total flux subtracted in 200 components = 0.00014595 Jy
! Clean residual min=-0.002449 max=0.002384 Jy/beam
! Clean residual mean=0.000002 rms=0.000813 Jy/beam
! Combined flux in latest and established models = 0.0516309 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 86 components and 0.0516309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059280Jy  sigma=1.121146
! Fit after  self-cal, rms=0.059437Jy  sigma=1.120604
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00021795 Jy
! Component: 100  -  total flux cleaned = 0.000263205 Jy
! Component: 150  -  total flux cleaned = 0.000347188 Jy
! Component: 200  -  total flux cleaned = 0.000387016 Jy
! Total flux subtracted in 200 components = 0.000387016 Jy
! Clean residual min=-0.002402 max=0.002317 Jy/beam
! Clean residual mean=0.000004 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 0.0520179 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 96 components and 0.0520179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059428Jy  sigma=1.120493
! Fit after  self-cal, rms=0.059411Jy  sigma=1.120378
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059411Jy  sigma=1.120378
! Fit after  self-cal, rms=0.059949Jy  sigma=1.120119
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.04 mas, bmaj=24.8 mas, bpa=-0.383 degrees
! Estimated noise=0.654745 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000153125 Jy
! Component: 100  -  total flux cleaned = 0.000136586 Jy
! Component: 150  -  total flux cleaned = 0.00013607 Jy
! Component: 200  -  total flux cleaned = 0.00015008 Jy
! Total flux subtracted in 200 components = 0.00015008 Jy
! Clean residual min=-0.002510 max=0.002267 Jy/beam
! Clean residual mean=0.000003 rms=0.000777 Jy/beam
! Combined flux in latest and established models = 0.0521679 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 103 components and 0.0521679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059940Jy  sigma=1.119942
! Fit after  self-cal, rms=0.059962Jy  sigma=1.119874
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000134708 Jy
! Component: 100  -  total flux cleaned = 0.000174217 Jy
! Component: 150  -  total flux cleaned = 0.000211376 Jy
! Component: 200  -  total flux cleaned = 0.000234849 Jy
! Total flux subtracted in 200 components = 0.000234849 Jy
! Clean residual min=-0.002459 max=0.002210 Jy/beam
! Clean residual mean=0.000004 rms=0.000773 Jy/beam
! Combined flux in latest and established models = 0.0524028 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 108 components and 0.0524028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059956Jy  sigma=1.119784
! Fit after  self-cal, rms=0.059958Jy  sigma=1.119767
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059958Jy  sigma=1.119767
! Fit after  self-cal, rms=0.060330Jy  sigma=1.119715
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.22 mas, bmaj=25.79 mas, bpa=2.272 degrees
! Estimated noise=0.664777 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000149606 Jy
! Component: 100  -  total flux cleaned = 0.000123621 Jy
! Component: 150  -  total flux cleaned = 0.000122595 Jy
! Component: 200  -  total flux cleaned = 0.000111369 Jy
! Total flux subtracted in 200 components = 0.000111369 Jy
! Clean residual min=-0.002545 max=0.002347 Jy/beam
! Clean residual mean=0.000004 rms=0.000808 Jy/beam
! Combined flux in latest and established models = 0.0525142 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 120 components and 0.0525141 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060325Jy  sigma=1.119610
! Fit after  self-cal, rms=0.060336Jy  sigma=1.119595
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.02991e-05 Jy
! Component: 100  -  total flux cleaned = 1.96749e-05 Jy
! Component: 150  -  total flux cleaned = 9.97663e-06 Jy
! Component: 200  -  total flux cleaned = 1.99237e-05 Jy
! Total flux subtracted in 200 components = 1.99237e-05 Jy
! Clean residual min=-0.002540 max=0.002331 Jy/beam
! Clean residual mean=0.000005 rms=0.000807 Jy/beam
! Combined flux in latest and established models = 0.0525341 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 125 components and 0.0525341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060332Jy  sigma=1.119526
! Fit after  self-cal, rms=0.060335Jy  sigma=1.119519
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=11.03 mas, bmaj=24.83 mas, bpa=-0.4523 degrees
! Estimated noise=0.658191 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.03 x 24.83 at -0.4523 degrees (North through East)
! Clean map  min=-0.0025108  max=0.052909 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.07 mas, bmaj=23.23 mas, bpa=-4.934 degrees
! Estimated noise=0.899213 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0415977 Jy
! Component: 100  -  total flux cleaned = 0.0507126 Jy
! Component: 150  -  total flux cleaned = 0.0504028 Jy
! Component: 200  -  total flux cleaned = 0.0501069 Jy
! Total flux subtracted in 200 components = 0.0501069 Jy
! Clean residual min=-0.002870 max=0.002839 Jy/beam
! Clean residual mean=0.000001 rms=0.000923 Jy/beam
! Combined flux in latest and established models = 0.0501069 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0501069 Jy
! Inverting map and beam 
! Estimated beam: bmin=11.03 mas, bmaj=24.83 mas, bpa=-0.4523 degrees
! Estimated noise=0.658191 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000681246 Jy
! Component: 100  -  total flux cleaned = 0.00117212 Jy
! Component: 150  -  total flux cleaned = 0.00144707 Jy
! Component: 200  -  total flux cleaned = 0.00158537 Jy
! Total flux subtracted in 200 components = 0.00158537 Jy
! Clean residual min=-0.002718 max=0.002393 Jy/beam
! Clean residual mean=0.000001 rms=0.000815 Jy/beam
! Combined flux in latest and established models = 0.0516923 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 49 components and 0.0516923 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.22 mas, bmaj=25.79 mas, bpa=2.272 degrees
! Estimated noise=0.664777 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000348242 Jy
! Component: 100  -  total flux cleaned = 0.000463242 Jy
! Component: 150  -  total flux cleaned = 0.00056691 Jy
! Component: 200  -  total flux cleaned = 0.000646556 Jy
! Total flux subtracted in 200 components = 0.000646556 Jy
! Clean residual min=-0.002600 max=0.002350 Jy/beam
! Clean residual mean=0.000003 rms=0.000826 Jy/beam
! Combined flux in latest and established models = 0.0523389 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.47643e-05 Jy
! Component: 100  -  total flux cleaned = 8.70644e-05 Jy
! Component: 150  -  total flux cleaned = 0.000140923 Jy
! Component: 200  -  total flux cleaned = 0.000179494 Jy
! Total flux subtracted in 200 components = 0.000179494 Jy
! Clean residual min=-0.002552 max=0.002360 Jy/beam
! Clean residual mean=0.000004 rms=0.000819 Jy/beam
! Combined flux in latest and established models = 0.0525184 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 75 components and 0.0525184 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=11.03 mas, bmaj=24.83 mas, bpa=-0.4523 degrees
! Estimated noise=0.658191 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.62871e-05 Jy
! Component: 100  -  total flux cleaned = 2.30821e-05 Jy
! Component: 150  -  total flux cleaned = 6.52803e-05 Jy
! Component: 200  -  total flux cleaned = 0.000106345 Jy
! Total flux subtracted in 200 components = 0.000106345 Jy
! Clean residual min=-0.002479 max=0.002302 Jy/beam
! Clean residual mean=0.000004 rms=0.000783 Jy/beam
! Combined flux in latest and established models = 0.0526247 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 87 components and 0.0526247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060344Jy  sigma=1.119722
! Fit after  self-cal, rms=0.060346Jy  sigma=1.119661
wmodel /J1033-2536_S_map.mod
! wmodel: Unable to open new model file: /J1033-2536_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1033-2536_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.03 x 24.83 at -0.4523 degrees (North through East)
! Clean map  min=-0.0024985  max=0.052953 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1033-2536_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0529526 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00077916 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -4.41428 4.41428 8.82856 17.6571 35.3143 70.6285
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0023 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.052 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  67.961 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1033-2536_S_dfm.log closed on Thu May 19 20:12:55 2016