! Started logfile: /scr/pima/bg219b_uvs/J1031-2228_S_dfm.log on Thu May 19 20:12:42 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219b_uvs/J1031-2228_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J1031-2228_S_uva.fits
! AN table 1: 50 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.816667 visibilities/baseline/integration-bin.
! Found source: J1031-2228
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 5880 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1031-2228_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.039169Jy  sigma=18.311307
! Fit after  self-cal, rms=0.800134Jy  sigma=13.808766
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.077 mas, bmaj=11.9 mas, bpa=15.86 degrees
! Estimated noise=0.893095 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.146038 Jy
! Component: 100  -  total flux cleaned = 0.198449 Jy
! Total flux subtracted in 100 components = 0.198449 Jy
! Clean residual min=-0.020482 max=0.057134 Jy/beam
! Clean residual mean=-0.000015 rms=0.006780 Jy/beam
! Combined flux in latest and established models = 0.198449 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.198449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149226Jy  sigma=2.532582
! Fit after  self-cal, rms=0.148785Jy  sigma=2.527032
! Inverting map 
! Added new window around map position (7.5, 4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0516771 Jy
! Component: 100  -  total flux cleaned = 0.0811705 Jy
! Total flux subtracted in 100 components = 0.0811705 Jy
! Clean residual min=-0.014952 max=0.036820 Jy/beam
! Clean residual mean=0.000010 rms=0.004732 Jy/beam
! Combined flux in latest and established models = 0.279619 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 23 components and 0.279619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.121898Jy  sigma=2.029257
! Fit after  self-cal, rms=0.114724Jy  sigma=1.909138
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0355562 Jy
! Component: 100  -  total flux cleaned = 0.0544664 Jy
! Total flux subtracted in 100 components = 0.0544664 Jy
! Clean residual min=-0.013599 max=0.014081 Jy/beam
! Clean residual mean=0.000028 rms=0.003301 Jy/beam
! Combined flux in latest and established models = 0.334086 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 36 components and 0.334086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099394Jy  sigma=1.637309
! Fit after  self-cal, rms=0.096068Jy  sigma=1.584624
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0198596 Jy
! Component: 100  -  total flux cleaned = 0.0309213 Jy
! Total flux subtracted in 100 components = 0.0309213 Jy
! Clean residual min=-0.011111 max=0.011009 Jy/beam
! Clean residual mean=0.000038 rms=0.002718 Jy/beam
! Combined flux in latest and established models = 0.365007 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 41 components and 0.365007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090853Jy  sigma=1.499095
! Fit after  self-cal, rms=0.090015Jy  sigma=1.485876
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.028 mas, bmaj=13.88 mas, bpa=14.12 degrees
! Estimated noise=0.55805 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0075154 Jy
! Component: 100  -  total flux cleaned = 0.00778881 Jy
! Component: 150  -  total flux cleaned = 0.0080106 Jy
! Component: 200  -  total flux cleaned = 0.00780925 Jy
! Total flux subtracted in 200 components = 0.00780925 Jy
! Clean residual min=-0.010004 max=0.012847 Jy/beam
! Clean residual mean=0.000043 rms=0.003383 Jy/beam
! Combined flux in latest and established models = 0.372816 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 70 components and 0.372816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087935Jy  sigma=1.455099
! Fit after  self-cal, rms=0.087665Jy  sigma=1.450337
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.028 x 13.88 at 14.12 degrees (North through East)
! Clean map  min=-0.0090983  max=0.17313 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.087665Jy  sigma=1.450337
! Fit after  self-cal, rms=0.087665Jy  sigma=1.450337
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.028 mas, bmaj=13.88 mas, bpa=14.12 degrees
! Estimated noise=0.55805 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122535 Jy
! Component: 100  -  total flux cleaned = 0.00120765 Jy
! Component: 150  -  total flux cleaned = 0.00166823 Jy
! Component: 200  -  total flux cleaned = 0.00166387 Jy
! Total flux subtracted in 200 components = 0.00166387 Jy
! Clean residual min=-0.009288 max=0.011961 Jy/beam
! Clean residual mean=0.000043 rms=0.003256 Jy/beam
! Combined flux in latest and established models = 0.37448 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 85 components and 0.37448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086864Jy  sigma=1.439402
! Fit after  self-cal, rms=0.086761Jy  sigma=1.437578
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086761Jy  sigma=1.437578
! Fit after  self-cal, rms=0.086761Jy  sigma=1.437578
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.028 mas, bmaj=13.88 mas, bpa=14.12 degrees
! Estimated noise=0.55805 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000197708 Jy
! Component: 100  -  total flux cleaned = 0.000180825 Jy
! Component: 150  -  total flux cleaned = -0.000176936 Jy
! Component: 200  -  total flux cleaned = -0.000403783 Jy
! Total flux subtracted in 200 components = -0.000403783 Jy
! Clean residual min=-0.008565 max=0.011868 Jy/beam
! Clean residual mean=0.000043 rms=0.003184 Jy/beam
! Combined flux in latest and established models = 0.374076 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 96 components and 0.374076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086341Jy  sigma=1.431673
! Fit after  self-cal, rms=0.086294Jy  sigma=1.430952
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000168222 Jy
! Component: 100  -  total flux cleaned = -5.65997e-05 Jy
! Component: 150  -  total flux cleaned = -0.000269496 Jy
! Component: 200  -  total flux cleaned = -0.00047462 Jy
! Total flux subtracted in 200 components = -0.00047462 Jy
! Clean residual min=-0.008295 max=0.011819 Jy/beam
! Clean residual mean=0.000043 rms=0.003137 Jy/beam
! Combined flux in latest and established models = 0.373602 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 101 components and 0.373602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086001Jy  sigma=1.426771
! Fit after  self-cal, rms=0.085977Jy  sigma=1.426433
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085977Jy  sigma=1.426433
! Fit after  self-cal, rms=0.085977Jy  sigma=1.426433
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.028 mas, bmaj=13.88 mas, bpa=14.12 degrees
! Estimated noise=0.55805 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.44758e-05 Jy
! Component: 100  -  total flux cleaned = -0.000163187 Jy
! Component: 150  -  total flux cleaned = -0.000352574 Jy
! Component: 200  -  total flux cleaned = -0.000625833 Jy
! Total flux subtracted in 200 components = -0.000625833 Jy
! Clean residual min=-0.008151 max=0.011760 Jy/beam
! Clean residual mean=0.000042 rms=0.003103 Jy/beam
! Combined flux in latest and established models = 0.372976 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 105 components and 0.372976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085758Jy  sigma=1.423217
! Fit after  self-cal, rms=0.085742Jy  sigma=1.423022
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012718 Jy
! Component: 100  -  total flux cleaned = -0.000225553 Jy
! Component: 150  -  total flux cleaned = -0.000477459 Jy
! Component: 200  -  total flux cleaned = -0.000720795 Jy
! Total flux subtracted in 200 components = -0.000720795 Jy
! Clean residual min=-0.008021 max=0.011712 Jy/beam
! Clean residual mean=0.000042 rms=0.003074 Jy/beam
! Combined flux in latest and established models = 0.372255 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 109 components and 0.372255 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085571Jy  sigma=1.420481
! Fit after  self-cal, rms=0.085560Jy  sigma=1.420347
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085560Jy  sigma=1.420347
! Fit after  self-cal, rms=0.085560Jy  sigma=1.420347
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.077 mas, bmaj=19.62 mas, bpa=4.891 degrees
! Estimated noise=0.642242 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00298028 Jy
! Component: 100  -  total flux cleaned = -0.00388215 Jy
! Component: 150  -  total flux cleaned = -0.00449191 Jy
! Component: 200  -  total flux cleaned = -0.0048657 Jy
! Total flux subtracted in 200 components = -0.0048657 Jy
! Clean residual min=-0.010331 max=0.017240 Jy/beam
! Clean residual mean=0.000065 rms=0.004545 Jy/beam
! Combined flux in latest and established models = 0.367389 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 113 components and 0.367389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085541Jy  sigma=1.419221
! Fit after  self-cal, rms=0.085549Jy  sigma=1.419062
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000358507 Jy
! Component: 100  -  total flux cleaned = -0.000695585 Jy
! Component: 150  -  total flux cleaned = -0.00101212 Jy
! Component: 200  -  total flux cleaned = -0.00123859 Jy
! Total flux subtracted in 200 components = -0.00123859 Jy
! Clean residual min=-0.010365 max=0.017188 Jy/beam
! Clean residual mean=0.000063 rms=0.004501 Jy/beam
! Combined flux in latest and established models = 0.366151 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 115 components and 0.366151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085542Jy  sigma=1.418814
! Fit after  self-cal, rms=0.085545Jy  sigma=1.418722
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.028 mas, bmaj=13.88 mas, bpa=14.12 degrees
! Estimated noise=0.55805 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.028 x 13.88 at 14.12 degrees (North through East)
! Clean map  min=-0.0079333  max=0.16658 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.077 mas, bmaj=11.9 mas, bpa=15.86 degrees
! Estimated noise=0.893095 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.15551 Jy
! Component: 100  -  total flux cleaned = 0.22563 Jy
! Component: 150  -  total flux cleaned = 0.272429 Jy
! Component: 200  -  total flux cleaned = 0.303908 Jy
! Total flux subtracted in 200 components = 0.303908 Jy
! Clean residual min=-0.011299 max=0.017070 Jy/beam
! Clean residual mean=0.000012 rms=0.003300 Jy/beam
! Combined flux in latest and established models = 0.303908 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.303908 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.028 mas, bmaj=13.88 mas, bpa=14.12 degrees
! Estimated noise=0.55805 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0311015 Jy
! Component: 100  -  total flux cleaned = 0.0483331 Jy
! Component: 150  -  total flux cleaned = 0.0587674 Jy
! Component: 200  -  total flux cleaned = 0.0640371 Jy
! Total flux subtracted in 200 components = 0.0640371 Jy
! Clean residual min=-0.007930 max=0.012694 Jy/beam
! Clean residual mean=0.000042 rms=0.003244 Jy/beam
! Combined flux in latest and established models = 0.367945 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 67 components and 0.367945 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.077 mas, bmaj=19.62 mas, bpa=4.891 degrees
! Estimated noise=0.642242 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00375594 Jy
! Component: 100  -  total flux cleaned = 0.0033493 Jy
! Component: 150  -  total flux cleaned = 0.00317868 Jy
! Component: 200  -  total flux cleaned = 0.00302715 Jy
! Total flux subtracted in 200 components = 0.00302715 Jy
! Clean residual min=-0.009995 max=0.017059 Jy/beam
! Clean residual mean=0.000069 rms=0.004741 Jy/beam
! Combined flux in latest and established models = 0.370972 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000287529 Jy
! Component: 100  -  total flux cleaned = -0.000687434 Jy
! Component: 150  -  total flux cleaned = -0.00106439 Jy
! Component: 200  -  total flux cleaned = -0.00141367 Jy
! Total flux subtracted in 200 components = -0.00141367 Jy
! Clean residual min=-0.010010 max=0.017105 Jy/beam
! Clean residual mean=0.000067 rms=0.004653 Jy/beam
! Combined flux in latest and established models = 0.369559 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 90 components and 0.369559 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.028 mas, bmaj=13.88 mas, bpa=14.12 degrees
! Estimated noise=0.55805 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000368669 Jy
! Component: 100  -  total flux cleaned = 0.000513123 Jy
! Component: 150  -  total flux cleaned = 0.00052409 Jy
! Component: 200  -  total flux cleaned = 0.00032622 Jy
! Total flux subtracted in 200 components = 0.00032622 Jy
! Clean residual min=-0.008022 max=0.011502 Jy/beam
! Clean residual mean=0.000040 rms=0.003044 Jy/beam
! Combined flux in latest and established models = 0.369885 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 103 components and 0.369885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085289Jy  sigma=1.416551
! Fit after  self-cal, rms=0.085196Jy  sigma=1.414636
wmodel /J1031-2228_S_map.mod
! wmodel: Unable to open new model file: /J1031-2228_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J1031-2228_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.028 x 13.88 at 14.12 degrees (North through East)
! Clean map  min=-0.0077854  max=0.15768 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J1031-2228_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.157683 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00303193 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -5.76838 5.76838 11.5368 23.0735 46.1471 92.2941
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.157 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  52.007 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J1031-2228_S_dfm.log closed on Thu May 19 20:12:45 2016