! Started logfile: /scr/pima/bg219b_uvs/J0929-3801_S_dfm.log on Thu May 19 20:11:46 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219b_uvs/J0929-3801_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219b_uvs/J0929-3801_S_uva.fits ! AN table 1: 24 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.927083 visibilities/baseline/integration-bin. ! Found source: J0929-3801 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 2492 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0929-3801_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.024836Jy sigma=14.570697 ! Fit after self-cal, rms=0.678668Jy sigma=9.601984 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=27.47 mas, bpa=21.81 degrees ! Estimated noise=1.77977 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.247768 Jy ! Component: 100 - total flux cleaned = 0.310719 Jy ! Total flux subtracted in 100 components = 0.310719 Jy ! Clean residual min=-0.024919 max=0.031973 Jy/beam ! Clean residual mean=-0.000087 rms=0.008016 Jy/beam ! Combined flux in latest and established models = 0.310719 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.310719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119469Jy sigma=1.671216 ! Fit after self-cal, rms=0.119419Jy sigma=1.670483 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.031 mas, bmaj=27.62 mas, bpa=20.56 degrees ! Estimated noise=1.01215 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.040773 Jy ! Component: 100 - total flux cleaned = 0.0603166 Jy ! Component: 150 - total flux cleaned = 0.0698492 Jy ! Component: 200 - total flux cleaned = 0.0708632 Jy ! Total flux subtracted in 200 components = 0.0708632 Jy ! Clean residual min=-0.016456 max=0.030554 Jy/beam ! Clean residual mean=0.000209 rms=0.006728 Jy/beam ! Combined flux in latest and established models = 0.381582 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 71 components and 0.381582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107119Jy sigma=1.459410 ! Fit after self-cal, rms=0.107123Jy sigma=1.458957 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.031 x 27.62 at 20.56 degrees (North through East) ! Clean map min=-0.016436 max=0.3334 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.107123Jy sigma=1.458957 ! Fit after self-cal, rms=0.107123Jy sigma=1.458957 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.031 mas, bmaj=27.62 mas, bpa=20.56 degrees ! Estimated noise=1.01215 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000161265 Jy ! Component: 100 - total flux cleaned = -0.000451284 Jy ! Component: 150 - total flux cleaned = -0.000698463 Jy ! Component: 200 - total flux cleaned = -0.00114452 Jy ! Total flux subtracted in 200 components = -0.00114452 Jy ! Clean residual min=-0.016767 max=0.029982 Jy/beam ! Clean residual mean=0.000198 rms=0.006663 Jy/beam ! Combined flux in latest and established models = 0.380438 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 106 components and 0.380438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106797Jy sigma=1.454386 ! Fit after self-cal, rms=0.106783Jy sigma=1.454241 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106783Jy sigma=1.454241 ! Fit after self-cal, rms=0.106783Jy sigma=1.454241 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.031 mas, bmaj=27.62 mas, bpa=20.56 degrees ! Estimated noise=1.01215 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000490089 Jy ! Component: 100 - total flux cleaned = -0.000680404 Jy ! Component: 150 - total flux cleaned = -0.00104029 Jy ! Component: 200 - total flux cleaned = -0.00130219 Jy ! Total flux subtracted in 200 components = -0.00130219 Jy ! Clean residual min=-0.016959 max=0.029560 Jy/beam ! Clean residual mean=0.000192 rms=0.006622 Jy/beam ! Combined flux in latest and established models = 0.379136 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 121 components and 0.379136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106636Jy sigma=1.451895 ! Fit after self-cal, rms=0.106636Jy sigma=1.451857 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (77.5, 110). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0246436 Jy ! Component: 100 - total flux cleaned = 0.0266575 Jy ! Component: 150 - total flux cleaned = 0.0261502 Jy ! Component: 200 - total flux cleaned = 0.0254019 Jy ! Total flux subtracted in 200 components = 0.0254019 Jy ! Clean residual min=-0.012785 max=0.023382 Jy/beam ! Clean residual mean=0.000207 rms=0.004604 Jy/beam ! Combined flux in latest and established models = 0.404538 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 177 components and 0.404538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101190Jy sigma=1.357255 ! Fit after self-cal, rms=0.100406Jy sigma=1.343296 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100406Jy sigma=1.343296 ! Fit after self-cal, rms=0.099636Jy sigma=1.267813 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.033 mas, bmaj=27.97 mas, bpa=20.58 degrees ! Estimated noise=1.02996 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00348824 Jy ! Component: 100 - total flux cleaned = -0.00389188 Jy ! Component: 150 - total flux cleaned = -0.00431045 Jy ! Component: 200 - total flux cleaned = -0.00515803 Jy ! Total flux subtracted in 200 components = -0.00515803 Jy ! Clean residual min=-0.007470 max=0.006070 Jy/beam ! Clean residual mean=0.000107 rms=0.001931 Jy/beam ! Combined flux in latest and established models = 0.39938 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 203 components and 0.39938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099281Jy sigma=1.262564 ! Fit after self-cal, rms=0.099313Jy sigma=1.261890 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000947131 Jy ! Component: 100 - total flux cleaned = -0.00134514 Jy ! Component: 150 - total flux cleaned = -0.00149271 Jy ! Component: 200 - total flux cleaned = -0.00189378 Jy ! Total flux subtracted in 200 components = -0.00189378 Jy ! Clean residual min=-0.007207 max=0.005610 Jy/beam ! Clean residual mean=0.000106 rms=0.001842 Jy/beam ! Combined flux in latest and established models = 0.397486 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 211 components and 0.397486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099200Jy sigma=1.260289 ! Fit after self-cal, rms=0.099186Jy sigma=1.260232 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099186Jy sigma=1.260232 ! Fit after self-cal, rms=0.099860Jy sigma=1.258829 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.594 mas, bmaj=42.23 mas, bpa=8.317 degrees ! Estimated noise=1.13661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00245402 Jy ! Component: 100 - total flux cleaned = -0.0030976 Jy ! Component: 150 - total flux cleaned = -0.00358187 Jy ! Component: 200 - total flux cleaned = -0.00395691 Jy ! Total flux subtracted in 200 components = -0.00395691 Jy ! Clean residual min=-0.007990 max=0.004776 Jy/beam ! Clean residual mean=0.000116 rms=0.002079 Jy/beam ! Combined flux in latest and established models = 0.393529 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 236 components and 0.393529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099754Jy sigma=1.256723 ! Fit after self-cal, rms=0.099747Jy sigma=1.256566 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00030504 Jy ! Component: 100 - total flux cleaned = -0.000589765 Jy ! Component: 150 - total flux cleaned = -0.000902845 Jy ! Component: 200 - total flux cleaned = -0.00119034 Jy ! Total flux subtracted in 200 components = -0.00119034 Jy ! Clean residual min=-0.007864 max=0.004676 Jy/beam ! Clean residual mean=0.000116 rms=0.002005 Jy/beam ! Combined flux in latest and established models = 0.392339 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 251 components and 0.392339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099713Jy sigma=1.255840 ! Fit after self-cal, rms=0.099708Jy sigma=1.255813 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.031 mas, bmaj=28.11 mas, bpa=20.59 degrees ! Estimated noise=1.0309 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.031 x 28.11 at 20.59 degrees (North through East) ! Clean map min=-0.0067243 max=0.33582 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.924 mas, bmaj=28.21 mas, bpa=21.78 degrees ! Estimated noise=1.80735 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.251405 Jy ! Component: 100 - total flux cleaned = 0.31444 Jy ! Component: 150 - total flux cleaned = 0.346884 Jy ! Component: 200 - total flux cleaned = 0.364864 Jy ! Total flux subtracted in 200 components = 0.364864 Jy ! Clean residual min=-0.012468 max=0.016278 Jy/beam ! Clean residual mean=-0.000025 rms=0.003861 Jy/beam ! Combined flux in latest and established models = 0.364864 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 69 model components to the UV plane model. ! The established model now contains 69 components and 0.364864 Jy ! Inverting map and beam ! Estimated beam: bmin=4.031 mas, bmaj=28.11 mas, bpa=20.59 degrees ! Estimated noise=1.0309 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-125, -123). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0186826 Jy ! Component: 100 - total flux cleaned = 0.0290185 Jy ! Component: 150 - total flux cleaned = 0.0346439 Jy ! Component: 200 - total flux cleaned = 0.0363298 Jy ! Total flux subtracted in 200 components = 0.0363298 Jy ! Clean residual min=-0.006142 max=0.007928 Jy/beam ! Clean residual mean=0.000094 rms=0.001981 Jy/beam ! Combined flux in latest and established models = 0.401194 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 135 components and 0.401194 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.594 mas, bmaj=42.23 mas, bpa=8.317 degrees ! Estimated noise=1.13661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00379382 Jy ! Component: 100 - total flux cleaned = -0.00582313 Jy ! Component: 150 - total flux cleaned = -0.00726825 Jy ! Component: 200 - total flux cleaned = -0.0084117 Jy ! Total flux subtracted in 200 components = -0.0084117 Jy ! Clean residual min=-0.006586 max=0.006238 Jy/beam ! Clean residual mean=0.000080 rms=0.001974 Jy/beam ! Combined flux in latest and established models = 0.392782 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100635 Jy ! Component: 100 - total flux cleaned = -0.00181035 Jy ! Component: 150 - total flux cleaned = -0.00245383 Jy ! Component: 200 - total flux cleaned = -0.00310636 Jy ! Total flux subtracted in 200 components = -0.00310636 Jy ! Clean residual min=-0.006379 max=0.005634 Jy/beam ! Clean residual mean=0.000065 rms=0.001812 Jy/beam ! Combined flux in latest and established models = 0.389676 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 200 components and 0.389676 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.031 mas, bmaj=28.11 mas, bpa=20.59 degrees ! Estimated noise=1.0309 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.60917e-05 Jy ! Component: 100 - total flux cleaned = -3.43163e-05 Jy ! Component: 150 - total flux cleaned = -0.000123595 Jy ! Component: 200 - total flux cleaned = -0.000287757 Jy ! Total flux subtracted in 200 components = -0.000287757 Jy ! Clean residual min=-0.005455 max=0.004761 Jy/beam ! Clean residual mean=0.000054 rms=0.001469 Jy/beam ! Combined flux in latest and established models = 0.389388 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 222 components and 0.389388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099568Jy sigma=1.254453 ! Fit after self-cal, rms=0.099502Jy sigma=1.253299 wmodel /J0929-3801_S_map.mod ! wmodel: Unable to open new model file: /J0929-3801_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219b_uvs/J0929-3801_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.031 x 28.11 at 20.59 degrees (North through East) ! Clean map min=-0.0055427 max=0.33148 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0929-3801_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.331482 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00145475 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.31659 1.31659 2.63317 5.26634 10.5327 21.0654 42.1307 84.2615 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0043 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.331 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 227.862 quit ! Quitting program ! Log file /scr/pima/bg219b_uvs/J0929-3801_S_dfm.log closed on Thu May 19 20:11:48 2016