! Started logfile: /scr/pima/bg219b_uvs/J0909+4753_X_dfm.log on Thu May 19 20:11:10 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0909+4753_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0909+4753_X_uva.fits
! AN table 1: 60 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.637037 visibilities/baseline/integration-bin.
! Found source: J0909+4753
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20640 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0909+4753_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004585Jy  sigma=24.830105
! Fit after  self-cal, rms=0.958366Jy  sigma=23.696421
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8172 mas, bmaj=1.653 mas, bpa=34.08 degrees
! Estimated noise=0.546338 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0323142 Jy
! Component: 100  -  total flux cleaned = 0.0400716 Jy
! Total flux subtracted in 100 components = 0.0400716 Jy
! Clean residual min=-0.004790 max=0.006969 Jy/beam
! Clean residual mean=0.000011 rms=0.001143 Jy/beam
! Combined flux in latest and established models = 0.0400716 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0400716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062465Jy  sigma=1.459266
! Fit after  self-cal, rms=0.060410Jy  sigma=1.407159
! Inverting map 
! Added new window around map position (-1.6, -1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0080796 Jy
! Component: 100  -  total flux cleaned = 0.0127907 Jy
! Total flux subtracted in 100 components = 0.0127907 Jy
! Clean residual min=-0.003531 max=0.003994 Jy/beam
! Clean residual mean=0.000008 rms=0.000896 Jy/beam
! Combined flux in latest and established models = 0.0528624 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 16 components and 0.0528624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059102Jy  sigma=1.372484
! Fit after  self-cal, rms=0.058862Jy  sigma=1.367456
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.117 mas, bmaj=1.864 mas, bpa=32.99 degrees
! Estimated noise=0.212772 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00627411 Jy
! Component: 100  -  total flux cleaned = 0.00984981 Jy
! Component: 150  -  total flux cleaned = 0.0121943 Jy
! Component: 200  -  total flux cleaned = 0.0138173 Jy
! Total flux subtracted in 200 components = 0.0138173 Jy
! Clean residual min=-0.002254 max=0.003060 Jy/beam
! Clean residual mean=0.000001 rms=0.000644 Jy/beam
! Combined flux in latest and established models = 0.0666796 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 33 components and 0.0666796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058159Jy  sigma=1.348685
! Fit after  self-cal, rms=0.058001Jy  sigma=1.344762
! Inverting map 
! Added new window around map position (-4, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00355341 Jy
! Component: 100  -  total flux cleaned = 0.00562515 Jy
! Component: 150  -  total flux cleaned = 0.00686547 Jy
! Component: 200  -  total flux cleaned = 0.00734483 Jy
! Total flux subtracted in 200 components = 0.00734483 Jy
! Clean residual min=-0.001942 max=0.002632 Jy/beam
! Clean residual mean=-0.000003 rms=0.000545 Jy/beam
! Combined flux in latest and established models = 0.0740245 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 51 components and 0.0740245 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057777Jy  sigma=1.338497
! Fit after  self-cal, rms=0.057630Jy  sigma=1.335299
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.117 x 1.864 at 32.99 degrees (North through East)
! Clean map  min=-0.0018391  max=0.044715 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.91     HN        0.99     KP        1.02     
!   LA        0.98     MK        0.94     NL        1.08     OV        1.04     
!   PT        1.20     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        1.07     KP        0.98     
!   LA        0.99     MK        1.09     NL        1.07     OV        1.08     
!   PT        1.18     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.92     HN        1.00     KP        0.98     
!   LA        0.94     MK        0.97     NL        1.01     OV        1.03     
!   PT        1.10     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        0.92     KP        1.02     
!   LA        0.96     MK        1.06     NL        1.04     OV        0.96     
!   PT        1.09     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.92     HN        0.86     KP        0.99     
!   LA        0.87     MK        1.00     NL        0.92     OV        0.96     
!   PT        1.14     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.94     HN        0.91     KP        0.96     
!   LA        0.94     MK        1.01     NL        0.93     OV        0.95     
!   PT        1.13     SC        0.95     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.057630Jy  sigma=1.335299
! Fit after  self-cal, rms=0.056674Jy  sigma=1.332659
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.12 mas, bmaj=1.859 mas, bpa=32.9 degrees
! Estimated noise=0.210151 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00212867 Jy
! Component: 100  -  total flux cleaned = 0.00273886 Jy
! Component: 150  -  total flux cleaned = 0.00298272 Jy
! Component: 200  -  total flux cleaned = 0.0030561 Jy
! Total flux subtracted in 200 components = 0.0030561 Jy
! Clean residual min=-0.001569 max=0.001991 Jy/beam
! Clean residual mean=-0.000005 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.0770806 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 60 components and 0.0770805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056579Jy  sigma=1.330086
! Fit after  self-cal, rms=0.056536Jy  sigma=1.328647
! Inverting map 
! Added new window around map position (3.6, 44).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00205725 Jy
! Component: 100  -  total flux cleaned = 0.00331175 Jy
! Component: 150  -  total flux cleaned = 0.00393474 Jy
! Component: 200  -  total flux cleaned = 0.00427996 Jy
! Total flux subtracted in 200 components = 0.00427996 Jy
! Clean residual min=-0.001549 max=0.001610 Jy/beam
! Clean residual mean=-0.000004 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.0813605 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 87 components and 0.0813605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056433Jy  sigma=1.326144
! Fit after  self-cal, rms=0.056388Jy  sigma=1.325370
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056388Jy  sigma=1.325370
! Fit after  self-cal, rms=0.056339Jy  sigma=1.323715
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.118 mas, bmaj=1.856 mas, bpa=32.72 degrees
! Estimated noise=0.210177 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130191 Jy
! Component: 100  -  total flux cleaned = 0.00169917 Jy
! Component: 150  -  total flux cleaned = 0.00186937 Jy
! Component: 200  -  total flux cleaned = 0.00192964 Jy
! Total flux subtracted in 200 components = 0.00192964 Jy
! Clean residual min=-0.001366 max=0.001461 Jy/beam
! Clean residual mean=-0.000003 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.0832902 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 92 components and 0.0832902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056286Jy  sigma=1.322537
! Fit after  self-cal, rms=0.056255Jy  sigma=1.321508
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00028149 Jy
! Component: 100  -  total flux cleaned = 0.000349934 Jy
! Component: 150  -  total flux cleaned = 0.00038083 Jy
! Component: 200  -  total flux cleaned = 0.000408593 Jy
! Total flux subtracted in 200 components = 0.000408593 Jy
! Clean residual min=-0.001367 max=0.001390 Jy/beam
! Clean residual mean=-0.000003 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.0836988 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 96 components and 0.0836988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056213Jy  sigma=1.320623
! Fit after  self-cal, rms=0.056162Jy  sigma=1.319667
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056162Jy  sigma=1.319667
! Fit after  self-cal, rms=0.055925Jy  sigma=1.319279
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.118 mas, bmaj=1.852 mas, bpa=32.61 degrees
! Estimated noise=0.209334 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000560075 Jy
! Component: 100  -  total flux cleaned = 0.000624349 Jy
! Component: 150  -  total flux cleaned = 0.00062566 Jy
! Component: 200  -  total flux cleaned = 0.000625194 Jy
! Total flux subtracted in 200 components = 0.000625194 Jy
! Clean residual min=-0.001374 max=0.001374 Jy/beam
! Clean residual mean=-0.000003 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.084324 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 101 components and 0.0843239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055891Jy  sigma=1.318521
! Fit after  self-cal, rms=0.055858Jy  sigma=1.318138
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000168303 Jy
! Component: 100  -  total flux cleaned = 0.000196291 Jy
! Component: 150  -  total flux cleaned = 0.000147242 Jy
! Component: 200  -  total flux cleaned = 0.00010122 Jy
! Total flux subtracted in 200 components = 0.00010122 Jy
! Clean residual min=-0.001367 max=0.001324 Jy/beam
! Clean residual mean=-0.000003 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.0844252 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 103 components and 0.0844252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055832Jy  sigma=1.317575
! Fit after  self-cal, rms=0.055814Jy  sigma=1.317371
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055814Jy  sigma=1.317371
! Fit after  self-cal, rms=0.055730Jy  sigma=1.316924
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.25 mas, bmaj=2.501 mas, bpa=18.09 degrees
! Estimated noise=0.244674 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000320098 Jy
! Component: 100  -  total flux cleaned = -0.000245722 Jy
! Component: 150  -  total flux cleaned = -0.000184026 Jy
! Component: 200  -  total flux cleaned = -0.000183871 Jy
! Total flux subtracted in 200 components = -0.000183871 Jy
! Clean residual min=-0.001502 max=0.001433 Jy/beam
! Clean residual mean=-0.000004 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.0842413 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 121 components and 0.0842413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055718Jy  sigma=1.316590
! Fit after  self-cal, rms=0.055710Jy  sigma=1.316435
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.26278e-05 Jy
! Component: 100  -  total flux cleaned = -4.50623e-05 Jy
! Component: 150  -  total flux cleaned = -4.54041e-05 Jy
! Component: 200  -  total flux cleaned = -3.0398e-05 Jy
! Total flux subtracted in 200 components = -3.0398e-05 Jy
! Clean residual min=-0.001497 max=0.001440 Jy/beam
! Clean residual mean=-0.000004 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.0842109 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 134 components and 0.0842109 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055701Jy  sigma=1.316209
! Fit after  self-cal, rms=0.055695Jy  sigma=1.316070
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.113 mas, bmaj=1.851 mas, bpa=32.58 degrees
! Estimated noise=0.209093 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.113 x 1.851 at 32.58 degrees (North through East)
! Clean map  min=-0.0013719  max=0.042598 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8162 mas, bmaj=1.647 mas, bpa=33.7 degrees
! Estimated noise=0.536139 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0342322 Jy
! Component: 100  -  total flux cleaned = 0.0482091 Jy
! Component: 150  -  total flux cleaned = 0.0555217 Jy
! Component: 200  -  total flux cleaned = 0.0607355 Jy
! Total flux subtracted in 200 components = 0.0607355 Jy
! Clean residual min=-0.003480 max=0.003664 Jy/beam
! Clean residual mean=0.000006 rms=0.000856 Jy/beam
! Combined flux in latest and established models = 0.0607355 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0607355 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.113 mas, bmaj=1.851 mas, bpa=32.58 degrees
! Estimated noise=0.209093 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00585725 Jy
! Component: 100  -  total flux cleaned = 0.00997999 Jy
! Component: 150  -  total flux cleaned = 0.0130856 Jy
! Component: 200  -  total flux cleaned = 0.0154863 Jy
! Total flux subtracted in 200 components = 0.0154863 Jy
! Clean residual min=-0.002037 max=0.001904 Jy/beam
! Clean residual mean=0.000001 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.0762218 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 47 components and 0.0762218 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.25 mas, bmaj=2.501 mas, bpa=18.09 degrees
! Estimated noise=0.244674 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00261215 Jy
! Component: 100  -  total flux cleaned = 0.00430757 Jy
! Component: 150  -  total flux cleaned = 0.00528616 Jy
! Component: 200  -  total flux cleaned = 0.00612095 Jy
! Total flux subtracted in 200 components = 0.00612095 Jy
! Clean residual min=-0.001698 max=0.001657 Jy/beam
! Clean residual mean=-0.000003 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.0823428 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000565225 Jy
! Component: 100  -  total flux cleaned = 0.000945499 Jy
! Component: 150  -  total flux cleaned = 0.00116297 Jy
! Component: 200  -  total flux cleaned = 0.0012589 Jy
! Total flux subtracted in 200 components = 0.0012589 Jy
! Clean residual min=-0.001615 max=0.001489 Jy/beam
! Clean residual mean=-0.000003 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.0836017 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 97 components and 0.0836017 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.113 mas, bmaj=1.851 mas, bpa=32.58 degrees
! Estimated noise=0.209093 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.58998e-05 Jy
! Component: 100  -  total flux cleaned = 9.65046e-06 Jy
! Component: 150  -  total flux cleaned = 0.000166888 Jy
! Component: 200  -  total flux cleaned = 0.000195452 Jy
! Total flux subtracted in 200 components = 0.000195452 Jy
! Clean residual min=-0.001431 max=0.001371 Jy/beam
! Clean residual mean=-0.000002 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.0837971 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 118 components and 0.0837971 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055742Jy  sigma=1.317027
! Fit after  self-cal, rms=0.055711Jy  sigma=1.316019
wmodel /J0909+4753_X_map.mod
! wmodel: Unable to open new model file: /J0909+4753_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0909+4753_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.113 x 1.851 at 32.58 degrees (North through East)
! Clean map  min=-0.001438  max=0.041358 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0909+4753_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0413583 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000334975 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.4298 2.4298 4.85961 9.71921 19.4384 38.8769 77.7537
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.041 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  123.466 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0909+4753_X_dfm.log closed on Thu May 19 20:11:13 2016