! Started logfile: /scr/pima/bg219b_uvs/J0839+0104_X_dfm.log on Thu May 19 20:10:20 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0839+0104_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0839+0104_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.894444 visibilities/baseline/integration-bin.
! Found source: J0839+0104
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13524 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0839+0104_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.086147Jy  sigma=22.418622
! Fit after  self-cal, rms=0.613005Jy  sigma=12.636209
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6863 mas, bmaj=1.721 mas, bpa=-3.207 degrees
! Estimated noise=0.50096 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.27718 Jy
! Component: 100  -  total flux cleaned = 0.366781 Jy
! Total flux subtracted in 100 components = 0.366781 Jy
! Clean residual min=-0.021678 max=0.052450 Jy/beam
! Clean residual mean=0.000001 rms=0.005276 Jy/beam
! Combined flux in latest and established models = 0.366781 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.366781 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.139079Jy  sigma=2.888142
! Fit after  self-cal, rms=0.138533Jy  sigma=2.877924
! Inverting map 
! Added new window around map position (-0.8, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0571704 Jy
! Component: 100  -  total flux cleaned = 0.0913845 Jy
! Total flux subtracted in 100 components = 0.0913845 Jy
! Clean residual min=-0.013028 max=0.021900 Jy/beam
! Clean residual mean=-0.000000 rms=0.003185 Jy/beam
! Combined flux in latest and established models = 0.458166 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 15 components and 0.458166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099675Jy  sigma=2.014561
! Fit after  self-cal, rms=0.098630Jy  sigma=1.995461
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0237194 Jy
! Component: 100  -  total flux cleaned = 0.0387536 Jy
! Total flux subtracted in 100 components = 0.0387536 Jy
! Clean residual min=-0.010226 max=0.015847 Jy/beam
! Clean residual mean=-0.000001 rms=0.002546 Jy/beam
! Combined flux in latest and established models = 0.496919 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 22 components and 0.496919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090123Jy  sigma=1.781590
! Fit after  self-cal, rms=0.089931Jy  sigma=1.778108
! Inverting map 
! Added new window around map position (0, 14.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0148012 Jy
! Component: 100  -  total flux cleaned = 0.0245207 Jy
! Total flux subtracted in 100 components = 0.0245207 Jy
! Clean residual min=-0.010259 max=0.015128 Jy/beam
! Clean residual mean=-0.000001 rms=0.002274 Jy/beam
! Combined flux in latest and established models = 0.52144 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 39 components and 0.52144 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086262Jy  sigma=1.694988
! Fit after  self-cal, rms=0.085976Jy  sigma=1.687360
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8684 mas, bmaj=1.975 mas, bpa=-2.494 degrees
! Estimated noise=0.329623 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.8, -15.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0192686 Jy
! Component: 100  -  total flux cleaned = 0.0324994 Jy
! Component: 150  -  total flux cleaned = 0.0427848 Jy
! Component: 200  -  total flux cleaned = 0.0511627 Jy
! Total flux subtracted in 200 components = 0.0511627 Jy
! Clean residual min=-0.007945 max=0.013614 Jy/beam
! Clean residual mean=-0.000001 rms=0.002304 Jy/beam
! Combined flux in latest and established models = 0.572603 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 83 components and 0.572603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080266Jy  sigma=1.558589
! Fit after  self-cal, rms=0.080075Jy  sigma=1.553944
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8684 x 1.975 at -2.494 degrees (North through East)
! Clean map  min=-0.0076078  max=0.38801 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        1.00     KP        0.94     
!   LA        0.97     MK        0.99     NL        1.02     OV        0.95     
!   PT        1.14     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.01     KP        0.97     
!   LA        0.98     MK        0.99     NL        1.02     OV        1.00     
!   PT        1.20     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        0.97     KP        0.95     
!   LA        0.96     MK        1.01     NL        0.99     OV        0.97     
!   PT        1.18     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        0.97     KP        0.96     
!   LA        0.95     MK        1.01     NL        0.99     OV        0.96     
!   PT        1.15     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.99     KP        0.97     
!   LA        0.97     MK        1.04     NL        1.02     OV        0.97     
!   PT        1.19     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.98     KP        1.01     
!   LA        0.99     MK        1.06     NL        1.01     OV        0.99     
!   PT        1.18     SC        1.08     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        0.96     KP        0.96     
!   LA        0.96     MK        1.05     NL        1.00     OV        0.95     
!   PT        1.19     SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.96     KP        0.97     
!   LA        0.93     MK        1.04     NL        1.01     OV        0.98     
!   PT        1.17     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.95     HN        0.94     KP        0.95     
!   LA        0.92     MK        1.01     NL        0.98     OV        0.96     
!   PT        1.11     SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.94     HN        0.99     KP        0.94     
!   LA        0.92     MK        1.00     NL        0.98     OV        0.97     
!   PT        1.13     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.93     HN        0.91     KP        0.94     
!   LA        0.92     MK        0.96     NL        0.96     OV        0.90     
!   PT        1.07     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.080075Jy  sigma=1.553944
! Fit after  self-cal, rms=0.071479Jy  sigma=1.388983
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8745 mas, bmaj=1.983 mas, bpa=-2.564 degrees
! Estimated noise=0.325992 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00343509 Jy
! Component: 100  -  total flux cleaned = -0.00544321 Jy
! Component: 150  -  total flux cleaned = -0.00700675 Jy
! Component: 200  -  total flux cleaned = -0.00840383 Jy
! Total flux subtracted in 200 components = -0.00840383 Jy
! Clean residual min=-0.004428 max=0.004558 Jy/beam
! Clean residual mean=-0.000000 rms=0.001064 Jy/beam
! Combined flux in latest and established models = 0.564199 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 101 components and 0.564199 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070825Jy  sigma=1.376657
! Fit after  self-cal, rms=0.070830Jy  sigma=1.376003
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070830Jy  sigma=1.376003
! Fit after  self-cal, rms=0.070492Jy  sigma=1.363659
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8741 mas, bmaj=1.982 mas, bpa=-2.588 degrees
! Estimated noise=0.325093 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00297466 Jy
! Component: 100  -  total flux cleaned = -0.00436419 Jy
! Component: 150  -  total flux cleaned = -0.00542051 Jy
! Component: 200  -  total flux cleaned = -0.00631993 Jy
! Total flux subtracted in 200 components = -0.00631993 Jy
! Clean residual min=-0.003761 max=0.003643 Jy/beam
! Clean residual mean=-0.000000 rms=0.000862 Jy/beam
! Combined flux in latest and established models = 0.557879 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 112 components and 0.557879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070179Jy  sigma=1.357867
! Fit after  self-cal, rms=0.070172Jy  sigma=1.357678
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000594483 Jy
! Component: 100  -  total flux cleaned = -0.00114632 Jy
! Component: 150  -  total flux cleaned = -0.00165235 Jy
! Component: 200  -  total flux cleaned = -0.00196334 Jy
! Total flux subtracted in 200 components = -0.00196334 Jy
! Clean residual min=-0.003575 max=0.003551 Jy/beam
! Clean residual mean=-0.000000 rms=0.000841 Jy/beam
! Combined flux in latest and established models = 0.555915 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 120 components and 0.555915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070074Jy  sigma=1.355904
! Fit after  self-cal, rms=0.070069Jy  sigma=1.355844
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070069Jy  sigma=1.355844
! Fit after  self-cal, rms=0.069850Jy  sigma=1.354220
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8738 mas, bmaj=1.982 mas, bpa=-2.627 degrees
! Estimated noise=0.323914 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00244472 Jy
! Component: 100  -  total flux cleaned = -0.00346713 Jy
! Component: 150  -  total flux cleaned = -0.0041997 Jy
! Component: 200  -  total flux cleaned = -0.00454602 Jy
! Total flux subtracted in 200 components = -0.00454602 Jy
! Clean residual min=-0.003276 max=0.003140 Jy/beam
! Clean residual mean=0.000000 rms=0.000771 Jy/beam
! Combined flux in latest and established models = 0.551369 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 125 components and 0.551369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069710Jy  sigma=1.351897
! Fit after  self-cal, rms=0.069707Jy  sigma=1.351840
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000240754 Jy
! Component: 100  -  total flux cleaned = -0.000410593 Jy
! Component: 150  -  total flux cleaned = -0.000610335 Jy
! Component: 200  -  total flux cleaned = -0.000759816 Jy
! Total flux subtracted in 200 components = -0.000759816 Jy
! Clean residual min=-0.003155 max=0.003120 Jy/beam
! Clean residual mean=0.000000 rms=0.000761 Jy/beam
! Combined flux in latest and established models = 0.550609 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 128 components and 0.550609 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069658Jy  sigma=1.351000
! Fit after  self-cal, rms=0.069657Jy  sigma=1.350968
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069657Jy  sigma=1.350968
! Fit after  self-cal, rms=0.069442Jy  sigma=1.350137
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.103 mas, bmaj=3.171 mas, bpa=-0.3624 degrees
! Estimated noise=0.422626 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00228619 Jy
! Component: 100  -  total flux cleaned = -0.00297843 Jy
! Component: 150  -  total flux cleaned = -0.00316419 Jy
! Component: 200  -  total flux cleaned = -0.00346884 Jy
! Total flux subtracted in 200 components = -0.00346884 Jy
! Clean residual min=-0.004115 max=0.004084 Jy/beam
! Clean residual mean=0.000000 rms=0.001103 Jy/beam
! Combined flux in latest and established models = 0.547141 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 137 components and 0.547141 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069389Jy  sigma=1.349639
! Fit after  self-cal, rms=0.069386Jy  sigma=1.349451
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000328491 Jy
! Component: 100  -  total flux cleaned = -0.000417752 Jy
! Component: 150  -  total flux cleaned = -0.000492454 Jy
! Component: 200  -  total flux cleaned = -0.000522703 Jy
! Total flux subtracted in 200 components = -0.000522703 Jy
! Clean residual min=-0.004078 max=0.004013 Jy/beam
! Clean residual mean=0.000000 rms=0.001086 Jy/beam
! Combined flux in latest and established models = 0.546618 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 143 components and 0.546618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069392Jy  sigma=1.349971
! Fit after  self-cal, rms=0.069392Jy  sigma=1.349923
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8737 mas, bmaj=1.982 mas, bpa=-2.653 degrees
! Estimated noise=0.322726 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8737 x 1.982 at -2.653 degrees (North through East)
! Clean map  min=-0.0028166  max=0.38112 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6895 mas, bmaj=1.724 mas, bpa=-3.283 degrees
! Estimated noise=0.492671 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.271857 Jy
! Component: 100  -  total flux cleaned = 0.366573 Jy
! Component: 150  -  total flux cleaned = 0.420974 Jy
! Component: 200  -  total flux cleaned = 0.453574 Jy
! Total flux subtracted in 200 components = 0.453574 Jy
! Clean residual min=-0.007205 max=0.016773 Jy/beam
! Clean residual mean=0.000000 rms=0.002084 Jy/beam
! Combined flux in latest and established models = 0.453574 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.453574 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8737 mas, bmaj=1.982 mas, bpa=-2.653 degrees
! Estimated noise=0.322726 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0308593 Jy
! Component: 100  -  total flux cleaned = 0.0470464 Jy
! Component: 150  -  total flux cleaned = 0.0573117 Jy
! Component: 200  -  total flux cleaned = 0.0645628 Jy
! Total flux subtracted in 200 components = 0.0645628 Jy
! Clean residual min=-0.004322 max=0.004875 Jy/beam
! Clean residual mean=0.000000 rms=0.001114 Jy/beam
! Combined flux in latest and established models = 0.518137 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 49 components and 0.518137 Jy
! Inverting map 
! Added new window around map position (2, 15.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00575059 Jy
! Component: 100  -  total flux cleaned = 0.0103299 Jy
! Component: 150  -  total flux cleaned = 0.0140743 Jy
! Component: 200  -  total flux cleaned = 0.0171796 Jy
! Total flux subtracted in 200 components = 0.0171796 Jy
! Clean residual min=-0.003618 max=0.003376 Jy/beam
! Clean residual mean=0.000000 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 0.535316 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 87 components and 0.535316 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.103 mas, bmaj=3.171 mas, bpa=-0.3624 degrees
! Estimated noise=0.422626 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00460197 Jy
! Component: 100  -  total flux cleaned = 0.00771737 Jy
! Component: 150  -  total flux cleaned = 0.0100156 Jy
! Component: 200  -  total flux cleaned = 0.0115474 Jy
! Total flux subtracted in 200 components = 0.0115474 Jy
! Clean residual min=-0.004245 max=0.003455 Jy/beam
! Clean residual mean=0.000000 rms=0.001049 Jy/beam
! Combined flux in latest and established models = 0.546864 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000603133 Jy
! Component: 100  -  total flux cleaned = 0.000870274 Jy
! Component: 150  -  total flux cleaned = 0.000919289 Jy
! Component: 200  -  total flux cleaned = 0.000918815 Jy
! Total flux subtracted in 200 components = 0.000918815 Jy
! Clean residual min=-0.004027 max=0.003273 Jy/beam
! Clean residual mean=0.000000 rms=0.001009 Jy/beam
! Combined flux in latest and established models = 0.547783 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 125 components and 0.547783 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8737 mas, bmaj=1.982 mas, bpa=-2.653 degrees
! Estimated noise=0.322726 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000385683 Jy
! Component: 100  -  total flux cleaned = -9.56086e-05 Jy
! Component: 150  -  total flux cleaned = 0.000107099 Jy
! Component: 200  -  total flux cleaned = 0.000292037 Jy
! Total flux subtracted in 200 components = 0.000292037 Jy
! Clean residual min=-0.003464 max=0.003019 Jy/beam
! Clean residual mean=-0.000000 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 0.548075 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 143 components and 0.548075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069335Jy  sigma=1.348661
! Fit after  self-cal, rms=0.069302Jy  sigma=1.348110
wmodel /J0839+0104_X_map.mod
! wmodel: Unable to open new model file: /J0839+0104_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0839+0104_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8737 x 1.982 at -2.653 degrees (North through East)
! Clean map  min=-0.003111  max=0.38097 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0839+0104_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.380967 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000689385 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.54287 0.54287 1.08574 2.17148 4.34296 8.68591 17.3718 34.7437 69.4873
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.38 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  552.618 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0839+0104_X_dfm.log closed on Thu May 19 20:10:23 2016