! Started logfile: /scr/pima/bg219b_uvs/J0836+0053_S_dfm.log on Thu May 19 20:10:07 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219b_uvs/J0836+0053_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219b_uvs/J0836+0053_S_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.926852 visibilities/baseline/integration-bin. ! Found source: J0836+0053 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 8008 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0836+0053_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.012996Jy sigma=22.089477 ! Fit after self-cal, rms=0.919942Jy sigma=20.096021 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.59 mas, bmaj=9.422 mas, bpa=16.65 degrees ! Estimated noise=0.482314 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0646631 Jy ! Component: 100 - total flux cleaned = 0.0787639 Jy ! Total flux subtracted in 100 components = 0.0787639 Jy ! Clean residual min=-0.003628 max=0.005370 Jy/beam ! Clean residual mean=0.000005 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.0787639 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.0787639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065512Jy sigma=1.346823 ! Fit after self-cal, rms=0.064884Jy sigma=1.332114 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.271 mas, bmaj=10.03 mas, bpa=15.22 degrees ! Estimated noise=0.385622 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, 56). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00480187 Jy ! Component: 100 - total flux cleaned = 0.00636421 Jy ! Component: 150 - total flux cleaned = 0.00713522 Jy ! Component: 200 - total flux cleaned = 0.00778857 Jy ! Total flux subtracted in 200 components = 0.00778857 Jy ! Clean residual min=-0.002594 max=0.003840 Jy/beam ! Clean residual mean=-0.000002 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.0865525 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 24 components and 0.0865525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064520Jy sigma=1.323643 ! Fit after self-cal, rms=0.064461Jy sigma=1.322338 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.271 x 10.03 at 15.22 degrees (North through East) ! Clean map min=-0.0024914 max=0.081009 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.94 HN 0.99 KP 1.02 ! LA 0.90 NL 0.95 OV 0.97 PT 1.11 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.90 HN 0.96 KP 0.95 ! LA 0.99 NL 0.91 OV 0.95 PT 1.10 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.064461Jy sigma=1.322338 ! Fit after self-cal, rms=0.062811Jy sigma=1.318079 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.28 mas, bmaj=10.01 mas, bpa=15.01 degrees ! Estimated noise=0.379208 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000640134 Jy ! Component: 100 - total flux cleaned = -0.000787429 Jy ! Component: 150 - total flux cleaned = -0.000852667 Jy ! Component: 200 - total flux cleaned = -0.000911365 Jy ! Total flux subtracted in 200 components = -0.000911365 Jy ! Clean residual min=-0.002190 max=0.002123 Jy/beam ! Clean residual mean=-0.000003 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.0856411 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 48 components and 0.0856412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062778Jy sigma=1.317132 ! Fit after self-cal, rms=0.062774Jy sigma=1.316929 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062774Jy sigma=1.316929 ! Fit after self-cal, rms=0.062793Jy sigma=1.311892 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.269 mas, bmaj=9.987 mas, bpa=15.07 degrees ! Estimated noise=0.381262 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194002 Jy ! Component: 100 - total flux cleaned = 4.36562e-05 Jy ! Component: 150 - total flux cleaned = -6.36035e-05 Jy ! Component: 200 - total flux cleaned = -0.000161194 Jy ! Total flux subtracted in 200 components = -0.000161194 Jy ! Clean residual min=-0.001950 max=0.001650 Jy/beam ! Clean residual mean=-0.000002 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.08548 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 65 components and 0.08548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062771Jy sigma=1.311534 ! Fit after self-cal, rms=0.062779Jy sigma=1.311326 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.4369e-05 Jy ! Component: 100 - total flux cleaned = -0.000205235 Jy ! Component: 150 - total flux cleaned = -0.000274756 Jy ! Component: 200 - total flux cleaned = -0.000341283 Jy ! Total flux subtracted in 200 components = -0.000341283 Jy ! Clean residual min=-0.001914 max=0.001647 Jy/beam ! Clean residual mean=-0.000002 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.0851387 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 73 components and 0.0851387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062769Jy sigma=1.311147 ! Fit after self-cal, rms=0.062769Jy sigma=1.311137 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062769Jy sigma=1.311137 ! Fit after self-cal, rms=0.062759Jy sigma=1.311079 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.259 mas, bmaj=9.97 mas, bpa=15.07 degrees ! Estimated noise=0.381495 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239638 Jy ! Component: 100 - total flux cleaned = 0.000170898 Jy ! Component: 150 - total flux cleaned = 0.000123166 Jy ! Component: 200 - total flux cleaned = 6.28668e-05 Jy ! Total flux subtracted in 200 components = 6.28668e-05 Jy ! Clean residual min=-0.001887 max=0.001625 Jy/beam ! Clean residual mean=-0.000002 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.0852016 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 85 components and 0.0852015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062749Jy sigma=1.310919 ! Fit after self-cal, rms=0.062747Jy sigma=1.310912 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.36812e-05 Jy ! Component: 100 - total flux cleaned = -6.7309e-05 Jy ! Component: 150 - total flux cleaned = -0.000123181 Jy ! Component: 200 - total flux cleaned = -0.000149975 Jy ! Total flux subtracted in 200 components = -0.000149975 Jy ! Clean residual min=-0.001863 max=0.001626 Jy/beam ! Clean residual mean=-0.000002 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0850516 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 91 components and 0.0850516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062741Jy sigma=1.310796 ! Fit after self-cal, rms=0.062741Jy sigma=1.310789 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062741Jy sigma=1.310789 ! Fit after self-cal, rms=0.062700Jy sigma=1.310767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.856 mas, bmaj=12.45 mas, bpa=2.792 degrees ! Estimated noise=0.436788 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.83182e-05 Jy ! Component: 100 - total flux cleaned = -0.000133495 Jy ! Component: 150 - total flux cleaned = -0.00022247 Jy ! Component: 200 - total flux cleaned = -0.000271973 Jy ! Total flux subtracted in 200 components = -0.000271973 Jy ! Clean residual min=-0.002049 max=0.001754 Jy/beam ! Clean residual mean=-0.000003 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.0847796 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 107 components and 0.0847796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062698Jy sigma=1.310721 ! Fit after self-cal, rms=0.062697Jy sigma=1.310707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.15031e-05 Jy ! Component: 100 - total flux cleaned = -9.28099e-05 Jy ! Component: 150 - total flux cleaned = -0.000138944 Jy ! Component: 200 - total flux cleaned = -0.000189802 Jy ! Total flux subtracted in 200 components = -0.000189802 Jy ! Clean residual min=-0.002019 max=0.001756 Jy/beam ! Clean residual mean=-0.000003 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.0845898 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 117 components and 0.0845898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062696Jy sigma=1.310684 ! Fit after self-cal, rms=0.062696Jy sigma=1.310677 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.254 mas, bmaj=9.959 mas, bpa=15.06 degrees ! Estimated noise=0.381436 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.254 x 9.959 at 15.06 degrees (North through East) ! Clean map min=-0.0017904 max=0.080141 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.593 mas, bmaj=9.371 mas, bpa=16.48 degrees ! Estimated noise=0.471383 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0635058 Jy ! Component: 100 - total flux cleaned = 0.0775916 Jy ! Component: 150 - total flux cleaned = 0.0822752 Jy ! Component: 200 - total flux cleaned = 0.0838974 Jy ! Total flux subtracted in 200 components = 0.0838974 Jy ! Clean residual min=-0.002818 max=0.002435 Jy/beam ! Clean residual mean=0.000000 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.0838974 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0838974 Jy ! Inverting map and beam ! Estimated beam: bmin=4.254 mas, bmaj=9.959 mas, bpa=15.06 degrees ! Estimated noise=0.381436 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8, 61). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110625 Jy ! Component: 100 - total flux cleaned = 0.00142596 Jy ! Component: 150 - total flux cleaned = 0.00152448 Jy ! Component: 200 - total flux cleaned = 0.0015195 Jy ! Total flux subtracted in 200 components = 0.0015195 Jy ! Clean residual min=-0.002157 max=0.001809 Jy/beam ! Clean residual mean=-0.000001 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.0854169 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 45 components and 0.0854169 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.856 mas, bmaj=12.45 mas, bpa=2.792 degrees ! Estimated noise=0.436788 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000251873 Jy ! Component: 100 - total flux cleaned = 0.000253166 Jy ! Component: 150 - total flux cleaned = 0.000127836 Jy ! Component: 200 - total flux cleaned = -9.55269e-06 Jy ! Total flux subtracted in 200 components = -9.55269e-06 Jy ! Clean residual min=-0.002106 max=0.001668 Jy/beam ! Clean residual mean=-0.000003 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.0854074 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125714 Jy ! Component: 100 - total flux cleaned = -0.000243319 Jy ! Component: 150 - total flux cleaned = -0.000336239 Jy ! Component: 200 - total flux cleaned = -0.000440579 Jy ! Total flux subtracted in 200 components = -0.000440579 Jy ! Clean residual min=-0.002030 max=0.001654 Jy/beam ! Clean residual mean=-0.000003 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.0849668 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 88 components and 0.0849668 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.254 mas, bmaj=9.959 mas, bpa=15.06 degrees ! Estimated noise=0.381436 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000159304 Jy ! Component: 100 - total flux cleaned = -0.000158355 Jy ! Component: 150 - total flux cleaned = -0.00022691 Jy ! Component: 200 - total flux cleaned = -0.000353572 Jy ! Total flux subtracted in 200 components = -0.000353572 Jy ! Clean residual min=-0.001864 max=0.001617 Jy/beam ! Clean residual mean=-0.000001 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.0846132 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 104 components and 0.0846132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062699Jy sigma=1.310667 ! Fit after self-cal, rms=0.062696Jy sigma=1.310579 wmodel /J0836+0053_S_map.mod ! wmodel: Unable to open new model file: /J0836+0053_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219b_uvs/J0836+0053_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.254 x 9.959 at 15.06 degrees (North through East) ! Clean map min=-0.0017985 max=0.079681 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0836+0053_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0796814 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00041933 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.57877 1.57877 3.15755 6.3151 12.6302 25.2604 50.5208 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.079 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 190.02 quit ! Quitting program ! Log file /scr/pima/bg219b_uvs/J0836+0053_S_dfm.log closed on Thu May 19 20:10:09 2016