! Started logfile: /scr/pima/bg219b_uvs/J0825+0309_X_dfm.log on Thu May 19 20:09:45 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0825+0309_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0825+0309_X_uva.fits
! AN table 1: 18 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.787654 visibilities/baseline/integration-bin.
! Found source: J0825+0309
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 7656 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0825+0309_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.017889Jy  sigma=25.049792
! Fit after  self-cal, rms=0.809276Jy  sigma=10.396130
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7618 mas, bmaj=1.799 mas, bpa=6.579 degrees
! Estimated noise=1.0575 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.38988 Jy
! Component: 100  -  total flux cleaned = 1.69297 Jy
! Total flux subtracted in 100 components = 1.69297 Jy
! Clean residual min=-0.037386 max=0.084538 Jy/beam
! Clean residual mean=-0.000011 rms=0.011294 Jy/beam
! Combined flux in latest and established models = 1.69297 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1.69297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.253359Jy  sigma=2.978512
! Fit after  self-cal, rms=0.253343Jy  sigma=2.978428
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0765375 Jy
! Component: 100  -  total flux cleaned = 0.113188 Jy
! Total flux subtracted in 100 components = 0.113188 Jy
! Clean residual min=-0.037680 max=0.059886 Jy/beam
! Clean residual mean=-0.000010 rms=0.009401 Jy/beam
! Combined flux in latest and established models = 1.80615 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 1.80615 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.237800Jy  sigma=2.507104
! Fit after  self-cal, rms=0.237787Jy  sigma=2.506914
! Inverting map 
! Added new window around map position (-0.2, 14.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0507074 Jy
! Component: 100  -  total flux cleaned = 0.0756197 Jy
! Total flux subtracted in 100 components = 0.0756197 Jy
! Clean residual min=-0.035145 max=0.058265 Jy/beam
! Clean residual mean=-0.000005 rms=0.008545 Jy/beam
! Combined flux in latest and established models = 1.88177 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 28 components and 1.88177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.225328Jy  sigma=2.375384
! Fit after  self-cal, rms=0.223904Jy  sigma=2.343383
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9347 mas, bmaj=2.056 mas, bpa=4.961 degrees
! Estimated noise=0.771166 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.6, -14.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0573427 Jy
! Component: 100  -  total flux cleaned = 0.0946092 Jy
! Component: 150  -  total flux cleaned = 0.122849 Jy
! Component: 200  -  total flux cleaned = 0.14506 Jy
! Total flux subtracted in 200 components = 0.14506 Jy
! Clean residual min=-0.036036 max=0.051144 Jy/beam
! Clean residual mean=0.000005 rms=0.008594 Jy/beam
! Combined flux in latest and established models = 2.02683 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 52 components and 2.02683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.200213Jy  sigma=2.132753
! Fit after  self-cal, rms=0.198920Jy  sigma=2.109645
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9347 x 2.056 at 4.961 degrees (North through East)
! Clean map  min=-0.030604  max=1.7703 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        1.00     KP        0.97     
!   LA        0.98     MK        1.01     NL        0.99     OV        0.97     
!   PT        1.20     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.99     KP        0.97     
!   LA        0.97     MK        1.01     NL        0.99     OV        0.97     
!   PT        1.19     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.96     KP        0.98     
!   LA        0.96     MK        1.05     NL        1.00     OV        0.98     
!   PT        1.19     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.96     HN        0.95     KP        0.95     
!   LA        0.94     MK        1.02     NL        0.96     OV        0.96     
!   PT        1.16     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        0.97     KP        0.93     
!   LA        0.92     MK        1.02     NL        0.97     OV        0.96     
!   PT        1.16     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.93     HN        0.91     KP        0.96     
!   LA        0.93     MK        1.00     NL        0.95     OV        0.92     
!   PT        1.09     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.198920Jy  sigma=2.109645
! Fit after  self-cal, rms=0.162241Jy  sigma=1.688236
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9372 mas, bmaj=2.057 mas, bpa=5.018 degrees
! Estimated noise=0.759259 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0264676 Jy
! Component: 100  -  total flux cleaned = -0.0339322 Jy
! Component: 150  -  total flux cleaned = -0.0366706 Jy
! Component: 200  -  total flux cleaned = -0.0386843 Jy
! Total flux subtracted in 200 components = -0.0386843 Jy
! Clean residual min=-0.023606 max=0.026140 Jy/beam
! Clean residual mean=0.000005 rms=0.005455 Jy/beam
! Combined flux in latest and established models = 1.98815 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 71 components and 1.98815 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.156121Jy  sigma=1.645087
! Fit after  self-cal, rms=0.156012Jy  sigma=1.643996
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.156012Jy  sigma=1.643996
! Fit after  self-cal, rms=0.152616Jy  sigma=1.600484
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9371 mas, bmaj=2.057 mas, bpa=5.039 degrees
! Estimated noise=0.753196 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.014602 Jy
! Component: 100  -  total flux cleaned = -0.0152563 Jy
! Component: 150  -  total flux cleaned = -0.0152392 Jy
! Component: 200  -  total flux cleaned = -0.0150042 Jy
! Total flux subtracted in 200 components = -0.0150042 Jy
! Clean residual min=-0.021987 max=0.025203 Jy/beam
! Clean residual mean=0.000006 rms=0.005119 Jy/beam
! Combined flux in latest and established models = 1.97315 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 83 components and 1.97315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.149816Jy  sigma=1.589715
! Fit after  self-cal, rms=0.149771Jy  sigma=1.589248
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.6, 19.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0225221 Jy
! Component: 100  -  total flux cleaned = 0.0356353 Jy
! Component: 150  -  total flux cleaned = 0.0400898 Jy
! Component: 200  -  total flux cleaned = 0.0424877 Jy
! Total flux subtracted in 200 components = 0.0424877 Jy
! Clean residual min=-0.019742 max=0.022327 Jy/beam
! Clean residual mean=0.000001 rms=0.004667 Jy/beam
! Combined flux in latest and established models = 2.01563 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 116 components and 2.01563 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.145092Jy  sigma=1.541308
! Fit after  self-cal, rms=0.144680Jy  sigma=1.533709
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.144680Jy  sigma=1.533709
! Fit after  self-cal, rms=0.126791Jy  sigma=1.334810
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9372 mas, bmaj=2.055 mas, bpa=5.033 degrees
! Estimated noise=0.749531 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0142138 Jy
! Component: 100  -  total flux cleaned = -0.0186986 Jy
! Component: 150  -  total flux cleaned = -0.0194979 Jy
! Component: 200  -  total flux cleaned = -0.0201899 Jy
! Total flux subtracted in 200 components = -0.0201899 Jy
! Clean residual min=-0.014881 max=0.013494 Jy/beam
! Clean residual mean=0.000003 rms=0.003338 Jy/beam
! Combined flux in latest and established models = 1.99544 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 127 components and 1.99544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.124560Jy  sigma=1.313601
! Fit after  self-cal, rms=0.124412Jy  sigma=1.311636
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0016116 Jy
! Component: 100  -  total flux cleaned = -0.0018145 Jy
! Component: 150  -  total flux cleaned = -0.00162119 Jy
! Component: 200  -  total flux cleaned = -0.00180564 Jy
! Total flux subtracted in 200 components = -0.00180564 Jy
! Clean residual min=-0.014665 max=0.013034 Jy/beam
! Clean residual mean=0.000002 rms=0.003255 Jy/beam
! Combined flux in latest and established models = 1.99364 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 135 components and 1.99364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.123747Jy  sigma=1.304335
! Fit after  self-cal, rms=0.123717Jy  sigma=1.303856
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.123717Jy  sigma=1.303856
! Fit after  self-cal, rms=0.122819Jy  sigma=1.295254
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.024 mas, bmaj=3.114 mas, bpa=1.034 degrees
! Estimated noise=0.985611 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00893058 Jy
! Component: 100  -  total flux cleaned = -0.0123228 Jy
! Component: 150  -  total flux cleaned = -0.0143243 Jy
! Component: 200  -  total flux cleaned = -0.0161615 Jy
! Total flux subtracted in 200 components = -0.0161615 Jy
! Clean residual min=-0.018901 max=0.018982 Jy/beam
! Clean residual mean=0.000003 rms=0.005096 Jy/beam
! Combined flux in latest and established models = 1.97748 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 156 components and 1.97748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.121935Jy  sigma=1.292918
! Fit after  self-cal, rms=0.121876Jy  sigma=1.291941
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00240259 Jy
! Component: 100  -  total flux cleaned = -0.00386476 Jy
! Component: 150  -  total flux cleaned = -0.00523193 Jy
! Component: 200  -  total flux cleaned = -0.00633207 Jy
! Total flux subtracted in 200 components = -0.00633207 Jy
! Clean residual min=-0.018103 max=0.018675 Jy/beam
! Clean residual mean=0.000002 rms=0.004960 Jy/beam
! Combined flux in latest and established models = 1.97114 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 165 components and 1.97114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.121661Jy  sigma=1.292526
! Fit after  self-cal, rms=0.121659Jy  sigma=1.292238
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9372 mas, bmaj=2.055 mas, bpa=5.024 degrees
! Estimated noise=0.746002 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9372 x 2.055 at 5.024 degrees (North through East)
! Clean map  min=-0.012879  max=1.7075 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.121659Jy  sigma=1.292238
! Fit after  self-cal, rms=0.109445Jy  sigma=1.115983
! Inverting map and beam 
! Estimated beam: bmin=0.9385 mas, bmaj=2.056 mas, bpa=5.063 degrees
! Estimated noise=0.743653 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0104181 Jy
! Component: 100  -  total flux cleaned = -0.0161118 Jy
! Component: 150  -  total flux cleaned = -0.0191294 Jy
! Component: 200  -  total flux cleaned = -0.0210767 Jy
! Total flux subtracted in 200 components = -0.0210767 Jy
! Clean residual min=-0.012296 max=0.011204 Jy/beam
! Clean residual mean=-0.000001 rms=0.002705 Jy/beam
! Combined flux in latest and established models = 1.95007 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 173 components and 1.95007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.108048Jy  sigma=1.102653
! Fit after  self-cal, rms=0.107981Jy  sigma=1.101966
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00235583 Jy
! Component: 100  -  total flux cleaned = -0.00315222 Jy
! Component: 150  -  total flux cleaned = -0.00376473 Jy
! Component: 200  -  total flux cleaned = -0.00388368 Jy
! Total flux subtracted in 200 components = -0.00388368 Jy
! Clean residual min=-0.011926 max=0.011016 Jy/beam
! Clean residual mean=-0.000001 rms=0.002671 Jy/beam
! Combined flux in latest and established models = 1.94618 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 181 components and 1.94618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107685Jy  sigma=1.098216
! Fit after  self-cal, rms=0.107667Jy  sigma=1.098045
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107667Jy  sigma=1.098045
! Fit after  self-cal, rms=0.106953Jy  sigma=1.089796
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7661 mas, bmaj=1.8 mas, bpa=6.688 degrees
! Estimated noise=1.01394 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.33253 Jy
! Component: 100  -  total flux cleaned = 1.62311 Jy
! Component: 150  -  total flux cleaned = 1.69253 Jy
! Component: 200  -  total flux cleaned = 1.72995 Jy
! Total flux subtracted in 200 components = 1.72995 Jy
! Clean residual min=-0.017470 max=0.030205 Jy/beam
! Clean residual mean=-0.000003 rms=0.004260 Jy/beam
! Combined flux in latest and established models = 1.72995 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 1.72995 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9384 mas, bmaj=2.055 mas, bpa=5.088 degrees
! Estimated noise=0.740348 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.2, -18.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0402101 Jy
! Component: 100  -  total flux cleaned = 0.0674674 Jy
! Component: 150  -  total flux cleaned = 0.0887645 Jy
! Component: 200  -  total flux cleaned = 0.106219 Jy
! Total flux subtracted in 200 components = 0.106219 Jy
! Clean residual min=-0.012737 max=0.017271 Jy/beam
! Clean residual mean=-0.000003 rms=0.003574 Jy/beam
! Combined flux in latest and established models = 1.83617 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 57 components and 1.83617 Jy
! Inverting map 
! Added new window around map position (30.2, 33).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.017125 Jy
! Component: 100  -  total flux cleaned = 0.0299853 Jy
! Component: 150  -  total flux cleaned = 0.0411761 Jy
! Component: 200  -  total flux cleaned = 0.0510604 Jy
! Total flux subtracted in 200 components = 0.0510604 Jy
! Clean residual min=-0.011832 max=0.012904 Jy/beam
! Clean residual mean=-0.000003 rms=0.002927 Jy/beam
! Combined flux in latest and established models = 1.88723 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 85 components and 1.88723 Jy
! Inverting map 
! Added new window around map position (13, 18.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117191 Jy
! Component: 100  -  total flux cleaned = 0.0197595 Jy
! Component: 150  -  total flux cleaned = 0.0247915 Jy
! Component: 200  -  total flux cleaned = 0.0285065 Jy
! Total flux subtracted in 200 components = 0.0285065 Jy
! Clean residual min=-0.010401 max=0.012419 Jy/beam
! Clean residual mean=-0.000005 rms=0.002595 Jy/beam
! Combined flux in latest and established models = 1.91573 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 102 components and 1.91573 Jy
! Inverting map 
! Added new window around map position (8, 10.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00555187 Jy
! Component: 100  -  total flux cleaned = 0.00841526 Jy
! Component: 150  -  total flux cleaned = 0.0109928 Jy
! Component: 200  -  total flux cleaned = 0.0129202 Jy
! Total flux subtracted in 200 components = 0.0129202 Jy
! Clean residual min=-0.009977 max=0.010086 Jy/beam
! Clean residual mean=-0.000005 rms=0.002358 Jy/beam
! Combined flux in latest and established models = 1.92865 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 125 components and 1.92865 Jy
! Inverting map 
! Added new window around map position (-30, -32.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0069646 Jy
! Component: 100  -  total flux cleaned = 0.00734401 Jy
! Component: 150  -  total flux cleaned = 0.0080644 Jy
! Component: 200  -  total flux cleaned = 0.00891425 Jy
! Total flux subtracted in 200 components = 0.00891425 Jy
! Clean residual min=-0.009741 max=0.009274 Jy/beam
! Clean residual mean=-0.000005 rms=0.002230 Jy/beam
! Combined flux in latest and established models = 1.93757 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 145 components and 1.93757 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.025 mas, bmaj=3.112 mas, bpa=1.079 degrees
! Estimated noise=0.977128 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130544 Jy
! Component: 100  -  total flux cleaned = 0.00152804 Jy
! Component: 150  -  total flux cleaned = 0.0015277 Jy
! Component: 200  -  total flux cleaned = 0.00190234 Jy
! Total flux subtracted in 200 components = 0.00190234 Jy
! Clean residual min=-0.012675 max=0.013487 Jy/beam
! Clean residual mean=-0.000010 rms=0.003441 Jy/beam
! Combined flux in latest and established models = 1.93947 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000688897 Jy
! Component: 100  -  total flux cleaned = 0.00085289 Jy
! Component: 150  -  total flux cleaned = 0.00146782 Jy
! Component: 200  -  total flux cleaned = 0.00176125 Jy
! Total flux subtracted in 200 components = 0.00176125 Jy
! Clean residual min=-0.012289 max=0.013320 Jy/beam
! Clean residual mean=-0.000010 rms=0.003333 Jy/beam
! Combined flux in latest and established models = 1.94123 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 185 components and 1.94123 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9384 mas, bmaj=2.055 mas, bpa=5.088 degrees
! Estimated noise=0.740348 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00127209 Jy
! Component: 100  -  total flux cleaned = -0.00128108 Jy
! Component: 150  -  total flux cleaned = -0.0011387 Jy
! Component: 200  -  total flux cleaned = -0.000857945 Jy
! Total flux subtracted in 200 components = -0.000857945 Jy
! Clean residual min=-0.008941 max=0.009241 Jy/beam
! Clean residual mean=-0.000005 rms=0.002050 Jy/beam
! Combined flux in latest and established models = 1.94037 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 207 components and 1.94037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102564Jy  sigma=1.048686
! Fit after  self-cal, rms=0.102057Jy  sigma=1.040897
wmodel /J0825+0309_X_map.mod
! wmodel: Unable to open new model file: /J0825+0309_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0825+0309_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9384 x 2.055 at 5.088 degrees (North through East)
! Clean map  min=-0.0079168  max=1.6914 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0825+0309_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.69139 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00199015 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.352992 0.352992 0.705983 1.41197 2.82393 5.64787 11.2957 22.5915 45.1829 90.3659
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0059 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.691 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  849.878 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0825+0309_X_dfm.log closed on Thu May 19 20:09:48 2016