! Started logfile: /scr/pima/bg219b_uvs/J0808+4052_S_dfm.log on Thu May 19 20:09:26 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219b_uvs/J0808+4052_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0808+4052_S_uva.fits
! AN table 1: 18 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.891975 visibilities/baseline/integration-bin.
! Found source: J0808+4052
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 2312 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0808+4052_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.087015Jy  sigma=23.067070
! Fit after  self-cal, rms=0.588673Jy  sigma=12.458467
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.098 mas, bmaj=6.532 mas, bpa=24.57 degrees
! Estimated noise=0.928339 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.326673 Jy
! Component: 100  -  total flux cleaned = 0.398486 Jy
! Total flux subtracted in 100 components = 0.398486 Jy
! Clean residual min=-0.012471 max=0.023534 Jy/beam
! Clean residual mean=-0.000001 rms=0.004263 Jy/beam
! Combined flux in latest and established models = 0.398485 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.398485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088837Jy  sigma=1.783724
! Fit after  self-cal, rms=0.088796Jy  sigma=1.783347
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.818 mas, bmaj=7.164 mas, bpa=24.38 degrees
! Estimated noise=0.762316 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0241706 Jy
! Component: 100  -  total flux cleaned = 0.0351406 Jy
! Component: 150  -  total flux cleaned = 0.0395621 Jy
! Component: 200  -  total flux cleaned = 0.039908 Jy
! Total flux subtracted in 200 components = 0.039908 Jy
! Clean residual min=-0.011932 max=0.018401 Jy/beam
! Clean residual mean=-0.000057 rms=0.003938 Jy/beam
! Combined flux in latest and established models = 0.438393 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.438393 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082127Jy  sigma=1.657657
! Fit after  self-cal, rms=0.081908Jy  sigma=1.652554
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.818 x 7.164 at 24.38 degrees (North through East)
! Clean map  min=-0.011382  max=0.41609 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.081908Jy  sigma=1.652554
! Fit after  self-cal, rms=0.081908Jy  sigma=1.652554
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.818 mas, bmaj=7.164 mas, bpa=24.38 degrees
! Estimated noise=0.762316 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119178 Jy
! Component: 100  -  total flux cleaned = 0.000653339 Jy
! Component: 150  -  total flux cleaned = 0.000180479 Jy
! Component: 200  -  total flux cleaned = -0.000237204 Jy
! Total flux subtracted in 200 components = -0.000237204 Jy
! Clean residual min=-0.011373 max=0.018559 Jy/beam
! Clean residual mean=-0.000057 rms=0.003882 Jy/beam
! Combined flux in latest and established models = 0.438156 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 15 components and 0.438156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081467Jy  sigma=1.644661
! Fit after  self-cal, rms=0.081463Jy  sigma=1.644276
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081463Jy  sigma=1.644276
! Fit after  self-cal, rms=0.081463Jy  sigma=1.644276
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.818 mas, bmaj=7.164 mas, bpa=24.38 degrees
! Estimated noise=0.762316 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000151968 Jy
! Component: 100  -  total flux cleaned = -0.000492777 Jy
! Component: 150  -  total flux cleaned = -0.000794233 Jy
! Component: 200  -  total flux cleaned = -0.00106152 Jy
! Total flux subtracted in 200 components = -0.00106152 Jy
! Clean residual min=-0.011391 max=0.018413 Jy/beam
! Clean residual mean=-0.000057 rms=0.003866 Jy/beam
! Combined flux in latest and established models = 0.437095 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 19 components and 0.437095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081292Jy  sigma=1.641452
! Fit after  self-cal, rms=0.081296Jy  sigma=1.641322
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (32, 42.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153817 Jy
! Component: 100  -  total flux cleaned = 0.0188187 Jy
! Component: 150  -  total flux cleaned = 0.0213335 Jy
! Component: 200  -  total flux cleaned = 0.0231564 Jy
! Total flux subtracted in 200 components = 0.0231564 Jy
! Clean residual min=-0.011230 max=0.015316 Jy/beam
! Clean residual mean=-0.000031 rms=0.003454 Jy/beam
! Combined flux in latest and established models = 0.460251 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 43 components and 0.460251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077503Jy  sigma=1.558584
! Fit after  self-cal, rms=0.077212Jy  sigma=1.551900
! Inverting map 
! Added new window around map position (-18, -42).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0124024 Jy
! Component: 100  -  total flux cleaned = 0.0149198 Jy
! Component: 150  -  total flux cleaned = 0.0168681 Jy
! Component: 200  -  total flux cleaned = 0.0177861 Jy
! Total flux subtracted in 200 components = 0.0177861 Jy
! Clean residual min=-0.010639 max=0.012581 Jy/beam
! Clean residual mean=-0.000026 rms=0.002992 Jy/beam
! Combined flux in latest and established models = 0.478037 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 74 components and 0.478037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074086Jy  sigma=1.479360
! Fit after  self-cal, rms=0.073728Jy  sigma=1.471918
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073728Jy  sigma=1.471918
! Fit after  self-cal, rms=0.068095Jy  sigma=1.361446
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.835 mas, bmaj=7.145 mas, bpa=24.12 degrees
! Estimated noise=0.763251 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.86193e-05 Jy
! Component: 100  -  total flux cleaned = -0.00105279 Jy
! Component: 150  -  total flux cleaned = -0.00202574 Jy
! Component: 200  -  total flux cleaned = -0.00266858 Jy
! Total flux subtracted in 200 components = -0.00266858 Jy
! Clean residual min=-0.007752 max=0.009466 Jy/beam
! Clean residual mean=-0.000005 rms=0.002046 Jy/beam
! Combined flux in latest and established models = 0.475369 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 101 components and 0.475369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067644Jy  sigma=1.349969
! Fit after  self-cal, rms=0.067630Jy  sigma=1.349514
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9, 8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00842291 Jy
! Component: 100  -  total flux cleaned = 0.008478 Jy
! Component: 150  -  total flux cleaned = 0.00781093 Jy
! Component: 200  -  total flux cleaned = 0.00663688 Jy
! Total flux subtracted in 200 components = 0.00663688 Jy
! Clean residual min=-0.006861 max=0.007108 Jy/beam
! Clean residual mean=-0.000007 rms=0.001833 Jy/beam
! Combined flux in latest and established models = 0.482005 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 135 components and 0.482005 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066505Jy  sigma=1.324183
! Fit after  self-cal, rms=0.066402Jy  sigma=1.322029
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066402Jy  sigma=1.322029
! Fit after  self-cal, rms=0.065359Jy  sigma=1.295066
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.633 mas, bmaj=9.008 mas, bpa=-26.81 degrees
! Estimated noise=0.872117 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00305567 Jy
! Component: 100  -  total flux cleaned = 0.00281212 Jy
! Component: 150  -  total flux cleaned = 0.00261365 Jy
! Component: 200  -  total flux cleaned = 0.00244609 Jy
! Total flux subtracted in 200 components = 0.00244609 Jy
! Clean residual min=-0.008177 max=0.007376 Jy/beam
! Clean residual mean=-0.000011 rms=0.002147 Jy/beam
! Combined flux in latest and established models = 0.484452 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 164 components and 0.484451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065068Jy  sigma=1.289372
! Fit after  self-cal, rms=0.065039Jy  sigma=1.288675
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000667056 Jy
! Component: 100  -  total flux cleaned = 0.000589748 Jy
! Component: 150  -  total flux cleaned = 0.000586555 Jy
! Component: 200  -  total flux cleaned = 0.000519439 Jy
! Total flux subtracted in 200 components = 0.000519439 Jy
! Clean residual min=-0.007736 max=0.007008 Jy/beam
! Clean residual mean=-0.000012 rms=0.002107 Jy/beam
! Combined flux in latest and established models = 0.484971 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 193 components and 0.484971 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064946Jy  sigma=1.286912
! Fit after  self-cal, rms=0.064931Jy  sigma=1.286728
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.825 mas, bmaj=7.147 mas, bpa=24.17 degrees
! Estimated noise=0.764099 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.825 x 7.147 at 24.17 degrees (North through East)
! Clean map  min=-0.0062403  max=0.41179 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.103 mas, bmaj=6.515 mas, bpa=24.35 degrees
! Estimated noise=0.922887 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.324573 Jy
! Component: 100  -  total flux cleaned = 0.396689 Jy
! Component: 150  -  total flux cleaned = 0.425457 Jy
! Component: 200  -  total flux cleaned = 0.444192 Jy
! Total flux subtracted in 200 components = 0.444192 Jy
! Clean residual min=-0.008548 max=0.010435 Jy/beam
! Clean residual mean=-0.000003 rms=0.002480 Jy/beam
! Combined flux in latest and established models = 0.444192 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.444192 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.825 mas, bmaj=7.147 mas, bpa=24.17 degrees
! Estimated noise=0.764099 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.014343 Jy
! Component: 100  -  total flux cleaned = 0.0226773 Jy
! Component: 150  -  total flux cleaned = 0.0274536 Jy
! Component: 200  -  total flux cleaned = 0.0309535 Jy
! Total flux subtracted in 200 components = 0.0309535 Jy
! Clean residual min=-0.006569 max=0.007827 Jy/beam
! Clean residual mean=-0.000016 rms=0.001872 Jy/beam
! Combined flux in latest and established models = 0.475146 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 60 components and 0.475146 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.633 mas, bmaj=9.008 mas, bpa=-26.81 degrees
! Estimated noise=0.872117 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00369052 Jy
! Component: 100  -  total flux cleaned = 0.00479368 Jy
! Component: 150  -  total flux cleaned = 0.00535357 Jy
! Component: 200  -  total flux cleaned = 0.0061576 Jy
! Total flux subtracted in 200 components = 0.0061576 Jy
! Clean residual min=-0.007457 max=0.007818 Jy/beam
! Clean residual mean=-0.000019 rms=0.002210 Jy/beam
! Combined flux in latest and established models = 0.481303 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000708009 Jy
! Component: 100  -  total flux cleaned = 0.00146031 Jy
! Component: 150  -  total flux cleaned = 0.002131 Jy
! Component: 200  -  total flux cleaned = 0.00284409 Jy
! Total flux subtracted in 200 components = 0.00284409 Jy
! Clean residual min=-0.007356 max=0.007560 Jy/beam
! Clean residual mean=-0.000016 rms=0.002126 Jy/beam
! Combined flux in latest and established models = 0.484147 Jy
! Adding 72 model components to the UV plane model.
! The established model now contains 126 components and 0.484147 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.825 mas, bmaj=7.147 mas, bpa=24.17 degrees
! Estimated noise=0.764099 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00219026 Jy
! Component: 100  -  total flux cleaned = 0.0023185 Jy
! Component: 150  -  total flux cleaned = 0.00253326 Jy
! Component: 200  -  total flux cleaned = 0.00263037 Jy
! Total flux subtracted in 200 components = 0.00263037 Jy
! Clean residual min=-0.005905 max=0.006443 Jy/beam
! Clean residual mean=-0.000007 rms=0.001543 Jy/beam
! Combined flux in latest and established models = 0.486778 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 153 components and 0.486778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065151Jy  sigma=1.291179
! Fit after  self-cal, rms=0.065070Jy  sigma=1.289556
wmodel /J0808+4052_S_map.mod
! wmodel: Unable to open new model file: /J0808+4052_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0808+4052_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.825 x 7.147 at 24.17 degrees (North through East)
! Clean map  min=-0.0064844  max=0.40858 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0808+4052_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.408581 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0015376 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.12898 1.12898 2.25796 4.51592 9.03184 18.0637 36.1273 72.2547
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0046 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.408 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  265.726 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0808+4052_S_dfm.log closed on Thu May 19 20:09:28 2016