! Started logfile: /scr/pima/bg219b_uvs/J0805+6144_X_dfm.log on Thu May 19 20:09:22 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0805+6144_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0805+6144_X_uva.fits
! AN table 1: 18 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.782716 visibilities/baseline/integration-bin.
! Found source: J0805+6144
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 7608 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0805+6144_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.125800Jy  sigma=22.600982
! Fit after  self-cal, rms=0.515088Jy  sigma=10.431399
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7267 mas, bmaj=1.478 mas, bpa=-45.2 degrees
! Estimated noise=0.702691 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.366802 Jy
! Component: 100  -  total flux cleaned = 0.459273 Jy
! Total flux subtracted in 100 components = 0.459273 Jy
! Clean residual min=-0.022292 max=0.055342 Jy/beam
! Clean residual mean=-0.000009 rms=0.005731 Jy/beam
! Combined flux in latest and established models = 0.459273 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.459273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.148309Jy  sigma=2.883851
! Fit after  self-cal, rms=0.147705Jy  sigma=2.873721
! Inverting map 
! Added new window around map position (0.2, -1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0570059 Jy
! Component: 100  -  total flux cleaned = 0.0916458 Jy
! Total flux subtracted in 100 components = 0.0916458 Jy
! Clean residual min=-0.017714 max=0.018780 Jy/beam
! Clean residual mean=-0.000003 rms=0.003752 Jy/beam
! Combined flux in latest and established models = 0.550919 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 18 components and 0.550919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.109617Jy  sigma=2.118714
! Fit after  self-cal, rms=0.108257Jy  sigma=2.090560
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0269224 Jy
! Component: 100  -  total flux cleaned = 0.0458631 Jy
! Total flux subtracted in 100 components = 0.0458631 Jy
! Clean residual min=-0.014528 max=0.014564 Jy/beam
! Clean residual mean=-0.000001 rms=0.002999 Jy/beam
! Combined flux in latest and established models = 0.596782 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 36 components and 0.596782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095545Jy  sigma=1.836003
! Fit after  self-cal, rms=0.095090Jy  sigma=1.826516
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9672 mas, bmaj=1.684 mas, bpa=-50.21 degrees
! Estimated noise=0.437965 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0254649 Jy
! Component: 100  -  total flux cleaned = 0.0418199 Jy
! Component: 150  -  total flux cleaned = 0.0531392 Jy
! Component: 200  -  total flux cleaned = 0.061169 Jy
! Total flux subtracted in 200 components = 0.061169 Jy
! Clean residual min=-0.010639 max=0.016792 Jy/beam
! Clean residual mean=0.000016 rms=0.003212 Jy/beam
! Combined flux in latest and established models = 0.657951 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 69 components and 0.657951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086740Jy  sigma=1.653859
! Fit after  self-cal, rms=0.086440Jy  sigma=1.647399
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9672 x 1.684 at -50.21 degrees (North through East)
! Clean map  min=-0.0097771  max=0.48932 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        1.03     KP        0.94     
!   LA        0.95     MK        0.99     NL        1.02     OV        0.95     
!   PT        1.07     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.03     KP        0.97     
!   LA        0.98     MK        1.02     NL        1.02     OV        0.99     
!   PT        1.13     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.06     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.03     OV        0.99     
!   PT        1.12     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        0.98     KP        0.95     
!   LA        0.95     MK        1.01     NL        1.01     OV        0.96     
!   PT        1.08     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.04     KP        0.94     
!   LA        0.95     MK        0.98     NL        1.01     OV        0.96     
!   PT        1.06     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.01     KP        0.95     
!   LA        0.97     MK        1.01     NL        1.04     OV        0.98     
!   PT        1.12     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.04     KP        0.99     
!   LA        0.98     MK        1.03     NL        1.06     OV        1.00     
!   PT        1.14     SC        1.10     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.00     KP        0.96     
!   LA        0.95     MK        1.01     NL        1.02     OV        0.95     
!   PT        1.10     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.99     KP        0.95     
!   LA        0.94     MK        1.02     NL        1.05     OV        0.98     
!   PT        1.09     SC        1.05     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.95     HN        0.98     KP        0.94     
!   LA        0.94     MK        0.94     NL        0.99     OV        0.95     
!   PT        1.08     SC        1.05     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.96     HN        0.99     KP        0.92     
!   LA        0.92     MK        1.00     NL        1.00     OV        0.96     
!   PT        1.07     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.93     HN        0.94     KP        0.92     
!   LA        0.95     MK        0.95     NL        0.97     OV        0.93     
!   PT        1.03     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.086440Jy  sigma=1.647399
! Fit after  self-cal, rms=0.078074Jy  sigma=1.466353
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.973 mas, bmaj=1.695 mas, bpa=-49.97 degrees
! Estimated noise=0.434983 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00313868 Jy
! Component: 100  -  total flux cleaned = 0.0031402 Jy
! Component: 150  -  total flux cleaned = 0.00293922 Jy
! Component: 200  -  total flux cleaned = 0.00285263 Jy
! Total flux subtracted in 200 components = 0.00285263 Jy
! Clean residual min=-0.009048 max=0.009653 Jy/beam
! Clean residual mean=0.000016 rms=0.002400 Jy/beam
! Combined flux in latest and established models = 0.660803 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 79 components and 0.660803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077700Jy  sigma=1.459659
! Fit after  self-cal, rms=0.077689Jy  sigma=1.458673
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077689Jy  sigma=1.458673
! Fit after  self-cal, rms=0.067466Jy  sigma=1.304639
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9722 mas, bmaj=1.691 mas, bpa=-50.09 degrees
! Estimated noise=0.435471 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129164 Jy
! Component: 100  -  total flux cleaned = 0.00183774 Jy
! Component: 150  -  total flux cleaned = 0.00203765 Jy
! Component: 200  -  total flux cleaned = 0.00221028 Jy
! Total flux subtracted in 200 components = 0.00221028 Jy
! Clean residual min=-0.003659 max=0.004731 Jy/beam
! Clean residual mean=0.000004 rms=0.000860 Jy/beam
! Combined flux in latest and established models = 0.663014 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 88 components and 0.663014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067341Jy  sigma=1.301609
! Fit after  self-cal, rms=0.067324Jy  sigma=1.301105
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.2, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00452858 Jy
! Component: 100  -  total flux cleaned = 0.00623701 Jy
! Component: 150  -  total flux cleaned = 0.00677333 Jy
! Component: 200  -  total flux cleaned = 0.00677397 Jy
! Total flux subtracted in 200 components = 0.00677397 Jy
! Clean residual min=-0.003317 max=0.003588 Jy/beam
! Clean residual mean=0.000004 rms=0.000749 Jy/beam
! Combined flux in latest and established models = 0.669788 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 104 components and 0.669787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067030Jy  sigma=1.293876
! Fit after  self-cal, rms=0.066991Jy  sigma=1.293059
! Inverting map 
! Added new window around map position (-3, 11.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00296435 Jy
! Component: 100  -  total flux cleaned = 0.00367561 Jy
! Component: 150  -  total flux cleaned = 0.00408274 Jy
! Component: 200  -  total flux cleaned = 0.00425756 Jy
! Total flux subtracted in 200 components = 0.00425756 Jy
! Clean residual min=-0.003288 max=0.002933 Jy/beam
! Clean residual mean=0.000003 rms=0.000678 Jy/beam
! Combined flux in latest and established models = 0.674045 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 122 components and 0.674045 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066798Jy  sigma=1.288664
! Fit after  self-cal, rms=0.066796Jy  sigma=1.288528
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066796Jy  sigma=1.288528
! Fit after  self-cal, rms=0.066792Jy  sigma=1.287352
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9734 mas, bmaj=1.692 mas, bpa=-50.1 degrees
! Estimated noise=0.435482 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00173537 Jy
! Component: 100  -  total flux cleaned = 0.0024795 Jy
! Component: 150  -  total flux cleaned = 0.0029274 Jy
! Component: 200  -  total flux cleaned = 0.00324004 Jy
! Total flux subtracted in 200 components = 0.00324004 Jy
! Clean residual min=-0.003187 max=0.002714 Jy/beam
! Clean residual mean=0.000002 rms=0.000624 Jy/beam
! Combined flux in latest and established models = 0.677285 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 135 components and 0.677285 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066712Jy  sigma=1.285512
! Fit after  self-cal, rms=0.066709Jy  sigma=1.285431
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000500447 Jy
! Component: 100  -  total flux cleaned = 0.000740463 Jy
! Component: 150  -  total flux cleaned = 0.000960395 Jy
! Component: 200  -  total flux cleaned = 0.00112878 Jy
! Total flux subtracted in 200 components = 0.00112878 Jy
! Clean residual min=-0.003118 max=0.002605 Jy/beam
! Clean residual mean=0.000002 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.678414 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 144 components and 0.678414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066674Jy  sigma=1.284551
! Fit after  self-cal, rms=0.066671Jy  sigma=1.284517
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066671Jy  sigma=1.284517
! Fit after  self-cal, rms=0.066724Jy  sigma=1.284297
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.199 mas, bmaj=2.875 mas, bpa=-68.04 degrees
! Estimated noise=0.554688 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146975 Jy
! Component: 100  -  total flux cleaned = 0.00188751 Jy
! Component: 150  -  total flux cleaned = 0.00195061 Jy
! Component: 200  -  total flux cleaned = 0.00192452 Jy
! Total flux subtracted in 200 components = 0.00192452 Jy
! Clean residual min=-0.003448 max=0.003168 Jy/beam
! Clean residual mean=0.000004 rms=0.000792 Jy/beam
! Combined flux in latest and established models = 0.680338 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 162 components and 0.680338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066701Jy  sigma=1.283740
! Fit after  self-cal, rms=0.066696Jy  sigma=1.283653
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000228137 Jy
! Component: 100  -  total flux cleaned = 0.000437057 Jy
! Component: 150  -  total flux cleaned = 0.000553914 Jy
! Component: 200  -  total flux cleaned = 0.000643014 Jy
! Total flux subtracted in 200 components = 0.000643014 Jy
! Clean residual min=-0.003382 max=0.003107 Jy/beam
! Clean residual mean=0.000004 rms=0.000779 Jy/beam
! Combined flux in latest and established models = 0.680981 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 169 components and 0.680981 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066692Jy  sigma=1.283558
! Fit after  self-cal, rms=0.066690Jy  sigma=1.283536
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.974 mas, bmaj=1.693 mas, bpa=-50.1 degrees
! Estimated noise=0.43575 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.974 x 1.693 at -50.1 degrees (North through East)
! Clean map  min=-0.0027491  max=0.48485 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7306 mas, bmaj=1.485 mas, bpa=-45.19 degrees
! Estimated noise=0.698024 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.36315 Jy
! Component: 100  -  total flux cleaned = 0.463624 Jy
! Component: 150  -  total flux cleaned = 0.518058 Jy
! Component: 200  -  total flux cleaned = 0.553369 Jy
! Total flux subtracted in 200 components = 0.553369 Jy
! Clean residual min=-0.010014 max=0.019223 Jy/beam
! Clean residual mean=-0.000005 rms=0.002590 Jy/beam
! Combined flux in latest and established models = 0.553369 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.553369 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.974 mas, bmaj=1.693 mas, bpa=-50.1 degrees
! Estimated noise=0.43575 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0394405 Jy
! Component: 100  -  total flux cleaned = 0.0633322 Jy
! Component: 150  -  total flux cleaned = 0.0790818 Jy
! Component: 200  -  total flux cleaned = 0.089904 Jy
! Total flux subtracted in 200 components = 0.089904 Jy
! Clean residual min=-0.003824 max=0.006000 Jy/beam
! Clean residual mean=0.000003 rms=0.001171 Jy/beam
! Combined flux in latest and established models = 0.643273 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 56 components and 0.643273 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00768126 Jy
! Component: 100  -  total flux cleaned = 0.0132682 Jy
! Component: 150  -  total flux cleaned = 0.0175933 Jy
! Component: 200  -  total flux cleaned = 0.0210953 Jy
! Total flux subtracted in 200 components = 0.0210953 Jy
! Clean residual min=-0.003081 max=0.003034 Jy/beam
! Clean residual mean=0.000002 rms=0.000740 Jy/beam
! Combined flux in latest and established models = 0.664369 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 89 components and 0.664369 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.199 mas, bmaj=2.875 mas, bpa=-68.04 degrees
! Estimated noise=0.554688 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00485065 Jy
! Component: 100  -  total flux cleaned = 0.00789709 Jy
! Component: 150  -  total flux cleaned = 0.0100823 Jy
! Component: 200  -  total flux cleaned = 0.0118135 Jy
! Total flux subtracted in 200 components = 0.0118135 Jy
! Clean residual min=-0.002933 max=0.002994 Jy/beam
! Clean residual mean=0.000005 rms=0.000822 Jy/beam
! Combined flux in latest and established models = 0.676182 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00138813 Jy
! Component: 100  -  total flux cleaned = 0.0019894 Jy
! Component: 150  -  total flux cleaned = 0.00235241 Jy
! Component: 200  -  total flux cleaned = 0.00267778 Jy
! Total flux subtracted in 200 components = 0.00267778 Jy
! Clean residual min=-0.003081 max=0.003041 Jy/beam
! Clean residual mean=0.000004 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 0.67886 Jy
! Adding 76 model components to the UV plane model.
! The established model now contains 153 components and 0.67886 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.974 mas, bmaj=1.693 mas, bpa=-50.1 degrees
! Estimated noise=0.43575 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.44857e-05 Jy
! Component: 100  -  total flux cleaned = 0.000498837 Jy
! Component: 150  -  total flux cleaned = 0.000970187 Jy
! Component: 200  -  total flux cleaned = 0.00131211 Jy
! Total flux subtracted in 200 components = 0.00131211 Jy
! Clean residual min=-0.002836 max=0.002633 Jy/beam
! Clean residual mean=0.000002 rms=0.000591 Jy/beam
! Combined flux in latest and established models = 0.680172 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 170 components and 0.680172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066713Jy  sigma=1.283921
! Fit after  self-cal, rms=0.066690Jy  sigma=1.283343
wmodel /J0805+6144_X_map.mod
! wmodel: Unable to open new model file: /J0805+6144_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0805+6144_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.974 x 1.693 at -50.1 degrees (North through East)
! Clean map  min=-0.0027076  max=0.48516 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0805+6144_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.485162 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000584496 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.361424 0.361424 0.722847 1.44569 2.89139 5.78278 11.5656 23.1311 46.2622 92.5244
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.485 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  830.051 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0805+6144_X_dfm.log closed on Thu May 19 20:09:24 2016