! Started logfile: /scr/pima/bg219b_uvs/J0715-0921_X_dfm.log on Thu May 19 20:08:50 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0715-0921_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0715-0921_X_uva.fits
! AN table 1: 62 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.866667 visibilities/baseline/integration-bin.
! Found source: J0715-0921
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29016 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0715-0921_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006459Jy  sigma=23.481295
! Fit after  self-cal, rms=0.916417Jy  sigma=21.320031
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6585 mas, bmaj=1.737 mas, bpa=-3.654 degrees
! Estimated noise=0.356053 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0583572 Jy
! Component: 100  -  total flux cleaned = 0.0821798 Jy
! Total flux subtracted in 100 components = 0.0821798 Jy
! Clean residual min=-0.005273 max=0.016282 Jy/beam
! Clean residual mean=-0.000002 rms=0.001691 Jy/beam
! Combined flux in latest and established models = 0.0821798 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0821798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073719Jy  sigma=1.658176
! Fit after  self-cal, rms=0.072753Jy  sigma=1.637103
! Inverting map 
! Added new window around map position (-1.4, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0184224 Jy
! Component: 100  -  total flux cleaned = 0.0299272 Jy
! Total flux subtracted in 100 components = 0.0299272 Jy
! Clean residual min=-0.003610 max=0.007391 Jy/beam
! Clean residual mean=-0.000001 rms=0.001071 Jy/beam
! Combined flux in latest and established models = 0.112107 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 17 components and 0.112107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065989Jy  sigma=1.465115
! Fit after  self-cal, rms=0.065522Jy  sigma=1.453878
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00968604 Jy
! Component: 100  -  total flux cleaned = 0.0157073 Jy
! Total flux subtracted in 100 components = 0.0157073 Jy
! Clean residual min=-0.002751 max=0.004524 Jy/beam
! Clean residual mean=-0.000001 rms=0.000774 Jy/beam
! Combined flux in latest and established models = 0.127814 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 25 components and 0.127814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063657Jy  sigma=1.405318
! Fit after  self-cal, rms=0.063538Jy  sigma=1.402472
! Inverting map 
! Added new window around map position (-0.8, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00520115 Jy
! Component: 100  -  total flux cleaned = 0.00834486 Jy
! Total flux subtracted in 100 components = 0.00834486 Jy
! Clean residual min=-0.002387 max=0.003349 Jy/beam
! Clean residual mean=-0.000001 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.136159 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 34 components and 0.136159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063091Jy  sigma=1.390357
! Fit after  self-cal, rms=0.063045Jy  sigma=1.389383
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8308 mas, bmaj=2.061 mas, bpa=-2.583 degrees
! Estimated noise=0.193214 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.8, -19.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00481306 Jy
! Component: 100  -  total flux cleaned = 0.00751671 Jy
! Component: 150  -  total flux cleaned = 0.00941871 Jy
! Component: 200  -  total flux cleaned = 0.0105969 Jy
! Total flux subtracted in 200 components = 0.0105969 Jy
! Clean residual min=-0.002108 max=0.004336 Jy/beam
! Clean residual mean=-0.000003 rms=0.000657 Jy/beam
! Combined flux in latest and established models = 0.146756 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 68 components and 0.146756 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062670Jy  sigma=1.379394
! Fit after  self-cal, rms=0.062599Jy  sigma=1.377417
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8308 x 2.061 at -2.583 degrees (North through East)
! Clean map  min=-0.0020256  max=0.077658 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.95     HN        1.04     KP        0.92     
!   LA        0.97     MK        1.02     NL        0.99     OV        0.98     
!   PT        1.13     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.09     KP        1.00     
!   LA        0.98     MK        1.09     NL        1.05     OV        1.01     
!   PT        1.20     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.93     HN        1.04     KP        0.99     
!   LA        0.93     MK        1.00     NL        0.97     OV        0.98     
!   PT        1.16     SC        1.08     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.95     HN        0.99     KP        1.02     
!   LA        0.97     MK        1.10     NL        1.01     OV        0.94     
!   PT        1.18     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.00     KP        0.97     
!   LA        0.98     MK        1.01     NL        0.97     OV        0.95     
!   PT        1.17     SC        1.05     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        0.96     KP        0.97     
!   LA        0.98     MK        0.98     NL        1.04     OV        0.97     
!   PT        1.19     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.96     HN        0.95     KP        0.96     
!   LA        0.94     MK        1.03     NL        1.00     OV        0.95     
!   PT        1.12     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.95     HN        1.02     KP        0.97     
!   LA        0.95     MK        1.09     NL        0.94     OV        0.97     
!   PT        1.11     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.90     HN        0.89     KP        0.98     
!   LA        0.94     MK        1.02     NL        0.95     OV        0.89     
!   PT        1.07     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.062599Jy  sigma=1.377417
! Fit after  self-cal, rms=0.061969Jy  sigma=1.364547
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8387 mas, bmaj=2.071 mas, bpa=-2.418 degrees
! Estimated noise=0.192653 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000543275 Jy
! Component: 100  -  total flux cleaned = -0.000635716 Jy
! Component: 150  -  total flux cleaned = -0.000810829 Jy
! Component: 200  -  total flux cleaned = -0.000918317 Jy
! Total flux subtracted in 200 components = -0.000918317 Jy
! Clean residual min=-0.001503 max=0.001520 Jy/beam
! Clean residual mean=-0.000001 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.145838 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 84 components and 0.145838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061937Jy  sigma=1.363909
! Fit after  self-cal, rms=0.061976Jy  sigma=1.363641
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061976Jy  sigma=1.363641
! Fit after  self-cal, rms=0.061895Jy  sigma=1.360478
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8384 mas, bmaj=2.069 mas, bpa=-2.398 degrees
! Estimated noise=0.19231 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000226969 Jy
! Component: 100  -  total flux cleaned = -0.000361121 Jy
! Component: 150  -  total flux cleaned = -0.000439008 Jy
! Component: 200  -  total flux cleaned = -0.000473016 Jy
! Total flux subtracted in 200 components = -0.000473016 Jy
! Clean residual min=-0.001297 max=0.001375 Jy/beam
! Clean residual mean=-0.000001 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.145365 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 92 components and 0.145365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061879Jy  sigma=1.360204
! Fit after  self-cal, rms=0.061887Jy  sigma=1.360111
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.2, 49.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00118564 Jy
! Component: 100  -  total flux cleaned = 0.00119918 Jy
! Component: 150  -  total flux cleaned = 0.00120022 Jy
! Component: 200  -  total flux cleaned = 0.00120093 Jy
! Total flux subtracted in 200 components = 0.00120093 Jy
! Clean residual min=-0.001232 max=0.001294 Jy/beam
! Clean residual mean=-0.000000 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.146566 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 105 components and 0.146566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061859Jy  sigma=1.359578
! Fit after  self-cal, rms=0.061857Jy  sigma=1.359424
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061857Jy  sigma=1.359424
! Fit after  self-cal, rms=0.061701Jy  sigma=1.359373
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8379 mas, bmaj=2.068 mas, bpa=-2.386 degrees
! Estimated noise=0.191784 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000144297 Jy
! Component: 100  -  total flux cleaned = 0.000124808 Jy
! Component: 150  -  total flux cleaned = 0.000125254 Jy
! Component: 200  -  total flux cleaned = 0.000110527 Jy
! Total flux subtracted in 200 components = 0.000110527 Jy
! Clean residual min=-0.001169 max=0.001252 Jy/beam
! Clean residual mean=-0.000000 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.146676 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 109 components and 0.146676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061690Jy  sigma=1.359172
! Fit after  self-cal, rms=0.061690Jy  sigma=1.359157
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000119132 Jy
! Component: 100  -  total flux cleaned = 0.000104348 Jy
! Component: 150  -  total flux cleaned = 6.42449e-05 Jy
! Component: 200  -  total flux cleaned = 5.18047e-05 Jy
! Total flux subtracted in 200 components = 5.18047e-05 Jy
! Clean residual min=-0.001156 max=0.001240 Jy/beam
! Clean residual mean=-0.000000 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.146728 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 111 components and 0.146728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061684Jy  sigma=1.359045
! Fit after  self-cal, rms=0.061683Jy  sigma=1.359039
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061683Jy  sigma=1.359039
! Fit after  self-cal, rms=0.061524Jy  sigma=1.359020
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.169 mas, bmaj=3.757 mas, bpa=5.02 degrees
! Estimated noise=0.243846 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.68366e-05 Jy
! Component: 100  -  total flux cleaned = 1.59322e-05 Jy
! Component: 150  -  total flux cleaned = 3.02932e-05 Jy
! Component: 200  -  total flux cleaned = 4.33153e-05 Jy
! Total flux subtracted in 200 components = 4.33153e-05 Jy
! Clean residual min=-0.001433 max=0.001486 Jy/beam
! Clean residual mean=-0.000001 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.146771 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 122 components and 0.146771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061522Jy  sigma=1.358989
! Fit after  self-cal, rms=0.061520Jy  sigma=1.358977
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.63022e-05 Jy
! Component: 100  -  total flux cleaned = 4.6261e-05 Jy
! Component: 150  -  total flux cleaned = 4.62223e-05 Jy
! Component: 200  -  total flux cleaned = 3.52898e-05 Jy
! Total flux subtracted in 200 components = 3.52898e-05 Jy
! Clean residual min=-0.001402 max=0.001464 Jy/beam
! Clean residual mean=-0.000001 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.146807 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 129 components and 0.146807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061520Jy  sigma=1.358981
! Fit after  self-cal, rms=0.061520Jy  sigma=1.358976
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8375 mas, bmaj=2.067 mas, bpa=-2.373 degrees
! Estimated noise=0.191311 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8375 x 2.067 at -2.373 degrees (North through East)
! Clean map  min=-0.0010596  max=0.076341 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6655 mas, bmaj=1.741 mas, bpa=-3.575 degrees
! Estimated noise=0.351627 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0576873 Jy
! Component: 100  -  total flux cleaned = 0.0846341 Jy
! Component: 150  -  total flux cleaned = 0.102039 Jy
! Component: 200  -  total flux cleaned = 0.113712 Jy
! Total flux subtracted in 200 components = 0.113712 Jy
! Clean residual min=-0.002848 max=0.006341 Jy/beam
! Clean residual mean=-0.000000 rms=0.000860 Jy/beam
! Combined flux in latest and established models = 0.113712 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.113712 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8375 mas, bmaj=2.067 mas, bpa=-2.373 degrees
! Estimated noise=0.191311 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112403 Jy
! Component: 100  -  total flux cleaned = 0.0173922 Jy
! Component: 150  -  total flux cleaned = 0.0213596 Jy
! Component: 200  -  total flux cleaned = 0.0241249 Jy
! Total flux subtracted in 200 components = 0.0241249 Jy
! Clean residual min=-0.001748 max=0.002233 Jy/beam
! Clean residual mean=0.000000 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.137837 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 54 components and 0.137837 Jy
! Inverting map 
! Added new window around map position (-1, -18.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00227674 Jy
! Component: 100  -  total flux cleaned = 0.0039451 Jy
! Component: 150  -  total flux cleaned = 0.00526978 Jy
! Component: 200  -  total flux cleaned = 0.00614232 Jy
! Total flux subtracted in 200 components = 0.00614232 Jy
! Clean residual min=-0.001493 max=0.001305 Jy/beam
! Clean residual mean=-0.000000 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.143979 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 86 components and 0.143979 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.169 mas, bmaj=3.757 mas, bpa=5.02 degrees
! Estimated noise=0.243846 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011744 Jy
! Component: 100  -  total flux cleaned = 0.00158456 Jy
! Component: 150  -  total flux cleaned = 0.00191863 Jy
! Component: 200  -  total flux cleaned = 0.00213709 Jy
! Total flux subtracted in 200 components = 0.00213709 Jy
! Clean residual min=-0.001503 max=0.001442 Jy/beam
! Clean residual mean=-0.000001 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.146116 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000189118 Jy
! Component: 100  -  total flux cleaned = 0.00032256 Jy
! Component: 150  -  total flux cleaned = 0.00041284 Jy
! Component: 200  -  total flux cleaned = 0.000495829 Jy
! Total flux subtracted in 200 components = 0.000495829 Jy
! Clean residual min=-0.001445 max=0.001459 Jy/beam
! Clean residual mean=-0.000001 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.146612 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 126 components and 0.146612 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8375 mas, bmaj=2.067 mas, bpa=-2.373 degrees
! Estimated noise=0.191311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000156087 Jy
! Component: 100  -  total flux cleaned = -0.000131268 Jy
! Component: 150  -  total flux cleaned = -8.88138e-05 Jy
! Component: 200  -  total flux cleaned = -4.91001e-05 Jy
! Total flux subtracted in 200 components = -4.91001e-05 Jy
! Clean residual min=-0.001262 max=0.001159 Jy/beam
! Clean residual mean=-0.000000 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.146563 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 144 components and 0.146563 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061535Jy  sigma=1.359293
! Fit after  self-cal, rms=0.061521Jy  sigma=1.359039
wmodel /J0715-0921_X_map.mod
! wmodel: Unable to open new model file: /J0715-0921_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0715-0921_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8375 x 2.067 at -2.373 degrees (North through East)
! Clean map  min=-0.0010284  max=0.076377 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0715-0921_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0763767 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000293512 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.15289 1.15289 2.30577 4.61155 9.2231 18.4462 36.8924 73.7848
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.076 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  260.216 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0715-0921_X_dfm.log closed on Thu May 19 20:08:53 2016