! Started logfile: /scr/pima/bg219b_uvs/J0711-0137_X_dfm.log on Thu May 19 20:08:42 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219b_uvs/J0711-0137_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219b_uvs/J0711-0137_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.902004 visibilities/baseline/integration-bin.
! Found source: J0711-0137
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29712 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0711-0137_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.023930Jy  sigma=23.896364
! Fit after  self-cal, rms=0.823579Jy  sigma=19.181452
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6572 mas, bmaj=1.725 mas, bpa=-2.509 degrees
! Estimated noise=0.342948 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.139039 Jy
! Component: 100  -  total flux cleaned = 0.169359 Jy
! Total flux subtracted in 100 components = 0.169359 Jy
! Clean residual min=-0.004409 max=0.008463 Jy/beam
! Clean residual mean=-0.000001 rms=0.001098 Jy/beam
! Combined flux in latest and established models = 0.169359 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.169359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066216Jy  sigma=1.454101
! Fit after  self-cal, rms=0.066100Jy  sigma=1.451301
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00836516 Jy
! Component: 100  -  total flux cleaned = 0.0122266 Jy
! Total flux subtracted in 100 components = 0.0122266 Jy
! Clean residual min=-0.004036 max=0.005798 Jy/beam
! Clean residual mean=-0.000001 rms=0.000948 Jy/beam
! Combined flux in latest and established models = 0.181585 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.181585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065124Jy  sigma=1.426361
! Fit after  self-cal, rms=0.065113Jy  sigma=1.426138
! Inverting map 
! Added new window around map position (0.2, 15.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00499209 Jy
! Component: 100  -  total flux cleaned = 0.00756762 Jy
! Total flux subtracted in 100 components = 0.00756762 Jy
! Clean residual min=-0.003721 max=0.005017 Jy/beam
! Clean residual mean=-0.000001 rms=0.000885 Jy/beam
! Combined flux in latest and established models = 0.189153 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 24 components and 0.189153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064633Jy  sigma=1.414207
! Fit after  self-cal, rms=0.064574Jy  sigma=1.412466
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8209 mas, bmaj=2.028 mas, bpa=-2.359 degrees
! Estimated noise=0.189033 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.4, -15.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00568625 Jy
! Component: 100  -  total flux cleaned = 0.00938909 Jy
! Component: 150  -  total flux cleaned = 0.0115994 Jy
! Component: 200  -  total flux cleaned = 0.0132593 Jy
! Total flux subtracted in 200 components = 0.0132593 Jy
! Clean residual min=-0.003521 max=0.004484 Jy/beam
! Clean residual mean=-0.000002 rms=0.000820 Jy/beam
! Combined flux in latest and established models = 0.202412 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 65 components and 0.202412 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063952Jy  sigma=1.396711
! Fit after  self-cal, rms=0.063943Jy  sigma=1.396292
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8209 x 2.028 at -2.359 degrees (North through East)
! Clean map  min=-0.0031066  max=0.17588 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.00     KP        0.95     
!   LA        0.99     MK        0.97     NL        1.02     OV        0.97     
!   PT        1.14     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        1.01     KP        0.96     
!   LA        0.99     MK        1.02     NL        1.03     OV        1.03     
!   PT        1.18     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        0.99     KP        0.97     
!   LA        0.98     MK        0.99     NL        0.99     OV        0.98     
!   PT        1.16     SC        1.05     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.00     KP        0.98     
!   LA        0.98     MK        0.99     NL        1.01     OV        0.98     
!   PT        1.14     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.98     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.05     OV        1.00     
!   PT        1.19     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.00     KP        1.02     
!   LA        1.02     MK        1.06     NL        1.03     OV        1.03     
!   PT        1.15     SC        1.08     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        0.93     KP        1.00     
!   LA        0.97     MK        1.03     NL        1.01     OV        0.96     
!   PT        1.15     SC        1.05     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.94     HN        0.96     KP        0.98     
!   LA        0.95     MK        1.03     NL        1.02     OV        1.00     
!   PT        1.15     SC        1.08     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.95     HN        0.91     KP        0.96     
!   LA        0.93     MK        0.99     NL        1.00     OV        0.95     
!   PT        1.13     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        0.94     KP        0.96     
!   LA        0.93     MK        1.01     NL        0.98     OV        0.97     
!   PT        1.14     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.91     HN        0.88     KP        0.93     
!   LA        0.95     MK        0.98     NL        0.97     OV        0.95     
!   PT        1.06     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.063943Jy  sigma=1.396292
! Fit after  self-cal, rms=0.062395Jy  sigma=1.363277
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8227 mas, bmaj=2.035 mas, bpa=-2.626 degrees
! Estimated noise=0.18991 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00223291 Jy
! Component: 100  -  total flux cleaned = -0.00331666 Jy
! Component: 150  -  total flux cleaned = -0.00392684 Jy
! Component: 200  -  total flux cleaned = -0.00427152 Jy
! Total flux subtracted in 200 components = -0.00427152 Jy
! Clean residual min=-0.002022 max=0.001708 Jy/beam
! Clean residual mean=-0.000001 rms=0.000406 Jy/beam
! Combined flux in latest and established models = 0.198141 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 82 components and 0.198141 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062314Jy  sigma=1.361354
! Fit after  self-cal, rms=0.062330Jy  sigma=1.361133
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062330Jy  sigma=1.361133
! Fit after  self-cal, rms=0.062155Jy  sigma=1.357946
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8232 mas, bmaj=2.035 mas, bpa=-2.606 degrees
! Estimated noise=0.189174 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0012726 Jy
! Component: 100  -  total flux cleaned = -0.00201356 Jy
! Component: 150  -  total flux cleaned = -0.00256391 Jy
! Component: 200  -  total flux cleaned = -0.00275664 Jy
! Total flux subtracted in 200 components = -0.00275664 Jy
! Clean residual min=-0.001624 max=0.001573 Jy/beam
! Clean residual mean=-0.000000 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.195384 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 95 components and 0.195384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062124Jy  sigma=1.357215
! Fit after  self-cal, rms=0.062127Jy  sigma=1.357165
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000246758 Jy
! Component: 100  -  total flux cleaned = -0.000392676 Jy
! Component: 150  -  total flux cleaned = -0.000524166 Jy
! Component: 200  -  total flux cleaned = -0.0006313 Jy
! Total flux subtracted in 200 components = -0.0006313 Jy
! Clean residual min=-0.001606 max=0.001493 Jy/beam
! Clean residual mean=-0.000000 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.194753 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 103 components and 0.194753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062120Jy  sigma=1.357000
! Fit after  self-cal, rms=0.062119Jy  sigma=1.356993
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062119Jy  sigma=1.356993
! Fit after  self-cal, rms=0.061920Jy  sigma=1.356627
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8237 mas, bmaj=2.034 mas, bpa=-2.579 degrees
! Estimated noise=0.188325 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000965299 Jy
! Component: 100  -  total flux cleaned = -0.00150416 Jy
! Component: 150  -  total flux cleaned = -0.00184816 Jy
! Component: 200  -  total flux cleaned = -0.00198742 Jy
! Total flux subtracted in 200 components = -0.00198742 Jy
! Clean residual min=-0.001517 max=0.001404 Jy/beam
! Clean residual mean=-0.000000 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.192765 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 107 components and 0.192765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061903Jy  sigma=1.356218
! Fit after  self-cal, rms=0.061905Jy  sigma=1.356208
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000101448 Jy
! Component: 100  -  total flux cleaned = -0.000197356 Jy
! Component: 150  -  total flux cleaned = -0.000253388 Jy
! Component: 200  -  total flux cleaned = -0.000306583 Jy
! Total flux subtracted in 200 components = -0.000306583 Jy
! Clean residual min=-0.001511 max=0.001356 Jy/beam
! Clean residual mean=-0.000000 rms=0.000328 Jy/beam
! Combined flux in latest and established models = 0.192459 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 111 components and 0.192459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061901Jy  sigma=1.356125
! Fit after  self-cal, rms=0.061900Jy  sigma=1.356120
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061900Jy  sigma=1.356120
! Fit after  self-cal, rms=0.061668Jy  sigma=1.355897
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.077 mas, bmaj=3.451 mas, bpa=0.07847 degrees
! Estimated noise=0.242443 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00102852 Jy
! Component: 100  -  total flux cleaned = -0.0015417 Jy
! Component: 150  -  total flux cleaned = -0.00160674 Jy
! Component: 200  -  total flux cleaned = -0.00164926 Jy
! Total flux subtracted in 200 components = -0.00164926 Jy
! Clean residual min=-0.001724 max=0.001469 Jy/beam
! Clean residual mean=-0.000000 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.19081 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 122 components and 0.19081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061669Jy  sigma=1.355756
! Fit after  self-cal, rms=0.061667Jy  sigma=1.355714
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.46599e-05 Jy
! Component: 100  -  total flux cleaned = -8.75768e-05 Jy
! Component: 150  -  total flux cleaned = -8.70439e-05 Jy
! Component: 200  -  total flux cleaned = -7.56087e-05 Jy
! Total flux subtracted in 200 components = -7.56087e-05 Jy
! Clean residual min=-0.001737 max=0.001462 Jy/beam
! Clean residual mean=-0.000000 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.190734 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 125 components and 0.190734 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061670Jy  sigma=1.355765
! Fit after  self-cal, rms=0.061668Jy  sigma=1.355748
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8241 mas, bmaj=2.034 mas, bpa=-2.56 degrees
! Estimated noise=0.187493 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8241 x 2.034 at -2.56 degrees (North through East)
! Clean map  min=-0.0013714  max=0.17549 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6607 mas, bmaj=1.73 mas, bpa=-2.651 degrees
! Estimated noise=0.339467 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.137626 Jy
! Component: 100  -  total flux cleaned = 0.16764 Jy
! Component: 150  -  total flux cleaned = 0.175221 Jy
! Component: 200  -  total flux cleaned = 0.178848 Jy
! Total flux subtracted in 200 components = 0.178848 Jy
! Clean residual min=-0.002059 max=0.002411 Jy/beam
! Clean residual mean=-0.000000 rms=0.000565 Jy/beam
! Combined flux in latest and established models = 0.178848 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.178848 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8241 mas, bmaj=2.034 mas, bpa=-2.56 degrees
! Estimated noise=0.187493 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, 15).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00315565 Jy
! Component: 100  -  total flux cleaned = 0.00525398 Jy
! Component: 150  -  total flux cleaned = 0.0068206 Jy
! Component: 200  -  total flux cleaned = 0.00806613 Jy
! Total flux subtracted in 200 components = 0.00806613 Jy
! Clean residual min=-0.001508 max=0.001368 Jy/beam
! Clean residual mean=-0.000000 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.186915 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 35 components and 0.186915 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.077 mas, bmaj=3.451 mas, bpa=0.07847 degrees
! Estimated noise=0.242443 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00156341 Jy
! Component: 100  -  total flux cleaned = 0.00255442 Jy
! Component: 150  -  total flux cleaned = 0.00317255 Jy
! Component: 200  -  total flux cleaned = 0.00361134 Jy
! Total flux subtracted in 200 components = 0.00361134 Jy
! Clean residual min=-0.001694 max=0.001700 Jy/beam
! Clean residual mean=-0.000001 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.190526 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000353341 Jy
! Component: 100  -  total flux cleaned = 0.000567628 Jy
! Component: 150  -  total flux cleaned = 0.000691067 Jy
! Component: 200  -  total flux cleaned = 0.00082169 Jy
! Total flux subtracted in 200 components = 0.00082169 Jy
! Clean residual min=-0.001677 max=0.001591 Jy/beam
! Clean residual mean=-0.000001 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.191348 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 83 components and 0.191348 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8241 mas, bmaj=2.034 mas, bpa=-2.56 degrees
! Estimated noise=0.187493 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.2989e-05 Jy
! Component: 100  -  total flux cleaned = 0.000137943 Jy
! Component: 150  -  total flux cleaned = 0.000253009 Jy
! Component: 200  -  total flux cleaned = 0.000339639 Jy
! Total flux subtracted in 200 components = 0.000339639 Jy
! Clean residual min=-0.001425 max=0.001328 Jy/beam
! Clean residual mean=-0.000000 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.191687 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 98 components and 0.191687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061649Jy  sigma=1.355333
! Fit after  self-cal, rms=0.061639Jy  sigma=1.355136
wmodel /J0711-0137_X_map.mod
! wmodel: Unable to open new model file: /J0711-0137_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219b_uvs/J0711-0137_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8241 x 2.034 at -2.56 degrees (North through East)
! Clean map  min=-0.0013346  max=0.17573 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0711-0137_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.175727 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000299195 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.510784 0.510784 1.02157 2.04314 4.08627 8.17254 16.3451 32.6902 65.3803
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.175 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  587.332 
quit
! Quitting program
! Log file /scr/pima/bg219b_uvs/J0711-0137_X_dfm.log closed on Thu May 19 20:08:45 2016