! Started logfile: /scr/pima/bg219b_uvs/J0709+3737_S_uvs.log on Thu Apr 7 01:16:37 2016 obs /scr/pima/bg219b_uvs/J0709+3737_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219b_uvs/J0709+3737_S_uva.fits ! AN table 1: 36 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.909722 visibilities/baseline/integration-bin. ! Found source: J0709+3737 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 4716 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219b_uvs/J0709+3737_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.029746Jy sigma=24.512971 ! Fit after self-cal, rms=0.821179Jy sigma=19.618368 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.779 mas, bmaj=6.518 mas, bpa=21.16 degrees ! Estimated noise=0.726874 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.139116 Jy ! Component: 100 - total flux cleaned = 0.16953 Jy ! Total flux subtracted in 100 components = 0.16953 Jy ! Clean residual min=-0.010339 max=0.026055 Jy/beam ! Clean residual mean=0.000011 rms=0.002798 Jy/beam ! Combined flux in latest and established models = 0.16953 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.16953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068206Jy sigma=1.560067 ! Fit after self-cal, rms=0.068184Jy sigma=1.559740 ! Inverting map ! Added new window around map position (5.5, -9.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.021806 Jy ! Component: 100 - total flux cleaned = 0.0319599 Jy ! Total flux subtracted in 100 components = 0.0319599 Jy ! Clean residual min=-0.007579 max=0.009009 Jy/beam ! Clean residual mean=0.000012 rms=0.001951 Jy/beam ! Combined flux in latest and established models = 0.201489 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 12 components and 0.201489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061828Jy sigma=1.414616 ! Fit after self-cal, rms=0.061472Jy sigma=1.406400 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.66 mas, bmaj=7.372 mas, bpa=12.89 degrees ! Estimated noise=0.476241 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00516396 Jy ! Component: 100 - total flux cleaned = 0.00530544 Jy ! Component: 150 - total flux cleaned = 0.00518963 Jy ! Component: 200 - total flux cleaned = 0.00478749 Jy ! Total flux subtracted in 200 components = 0.00478749 Jy ! Clean residual min=-0.005782 max=0.008141 Jy/beam ! Clean residual mean=0.000007 rms=0.001760 Jy/beam ! Combined flux in latest and established models = 0.206277 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 24 components and 0.206277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060724Jy sigma=1.392005 ! Fit after self-cal, rms=0.060700Jy sigma=1.391573 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.66 x 7.372 at 12.89 degrees (North through East) ! Clean map min=-0.005664 max=0.18353 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Fit before self-cal, rms=0.060700Jy sigma=1.391573 ! Fit after self-cal, rms=0.060700Jy sigma=1.391573 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.66 mas, bmaj=7.372 mas, bpa=12.89 degrees ! Estimated noise=0.476241 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00061537 Jy ! Component: 100 - total flux cleaned = -0.00103868 Jy ! Component: 150 - total flux cleaned = -0.00133443 Jy ! Component: 200 - total flux cleaned = -0.00166923 Jy ! Total flux subtracted in 200 components = -0.00166923 Jy ! Clean residual min=-0.005477 max=0.007824 Jy/beam ! Clean residual mean=0.000007 rms=0.001725 Jy/beam ! Combined flux in latest and established models = 0.204608 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 36 components and 0.204608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060506Jy sigma=1.387337 ! Fit after self-cal, rms=0.060498Jy sigma=1.387168 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060498Jy sigma=1.387168 ! Fit after self-cal, rms=0.060498Jy sigma=1.387168 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.66 mas, bmaj=7.372 mas, bpa=12.89 degrees ! Estimated noise=0.476241 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000550882 Jy ! Component: 100 - total flux cleaned = -0.00078755 Jy ! Component: 150 - total flux cleaned = -0.00111678 Jy ! Component: 200 - total flux cleaned = -0.0013213 Jy ! Total flux subtracted in 200 components = -0.0013213 Jy ! Clean residual min=-0.005410 max=0.007608 Jy/beam ! Clean residual mean=0.000007 rms=0.001707 Jy/beam ! Combined flux in latest and established models = 0.203286 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 48 components and 0.203286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060398Jy sigma=1.385012 ! Fit after self-cal, rms=0.060394Jy sigma=1.384938 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (27, 83.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00748141 Jy ! Component: 100 - total flux cleaned = 0.0117013 Jy ! Component: 150 - total flux cleaned = 0.0143855 Jy ! Component: 200 - total flux cleaned = 0.0156291 Jy ! Total flux subtracted in 200 components = 0.0156291 Jy ! Clean residual min=-0.004856 max=0.006968 Jy/beam ! Clean residual mean=0.000004 rms=0.001473 Jy/beam ! Combined flux in latest and established models = 0.218916 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 107 components and 0.218916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059453Jy sigma=1.359746 ! Fit after self-cal, rms=0.059311Jy sigma=1.355484 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059311Jy sigma=1.355484 ! Fit after self-cal, rms=0.058427Jy sigma=1.337058 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.657 mas, bmaj=7.367 mas, bpa=12.58 degrees ! Estimated noise=0.474947 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000581347 Jy ! Component: 100 - total flux cleaned = 0.000739409 Jy ! Component: 150 - total flux cleaned = 0.000783856 Jy ! Component: 200 - total flux cleaned = 0.000860683 Jy ! Total flux subtracted in 200 components = 0.000860683 Jy ! Clean residual min=-0.004005 max=0.004312 Jy/beam ! Clean residual mean=0.000005 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.219776 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 123 components and 0.219776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058353Jy sigma=1.335102 ! Fit after self-cal, rms=0.058353Jy sigma=1.334900 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00046181 Jy ! Component: 100 - total flux cleaned = 0.000567046 Jy ! Component: 150 - total flux cleaned = 0.000600075 Jy ! Component: 200 - total flux cleaned = 0.000569434 Jy ! Total flux subtracted in 200 components = 0.000569434 Jy ! Clean residual min=-0.004039 max=0.004290 Jy/beam ! Clean residual mean=0.000005 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.220346 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 139 components and 0.220346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058321Jy sigma=1.334011 ! Fit after self-cal, rms=0.058322Jy sigma=1.333983 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058322Jy sigma=1.333983 ! Fit after self-cal, rms=0.058162Jy sigma=1.327596 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.904 mas, bmaj=9.629 mas, bpa=0.2243 degrees ! Estimated noise=0.544214 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000804579 Jy ! Component: 100 - total flux cleaned = -0.00114029 Jy ! Component: 150 - total flux cleaned = -0.00136759 Jy ! Component: 200 - total flux cleaned = -0.00154396 Jy ! Total flux subtracted in 200 components = -0.00154396 Jy ! Clean residual min=-0.004393 max=0.005340 Jy/beam ! Clean residual mean=0.000005 rms=0.001391 Jy/beam ! Combined flux in latest and established models = 0.218802 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 154 components and 0.218802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058166Jy sigma=1.327505 ! Fit after self-cal, rms=0.058167Jy sigma=1.327403 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000300338 Jy ! Component: 100 - total flux cleaned = -0.000395611 Jy ! Component: 150 - total flux cleaned = -0.00050319 Jy ! Component: 200 - total flux cleaned = -0.000602114 Jy ! Total flux subtracted in 200 components = -0.000602114 Jy ! Clean residual min=-0.004380 max=0.005324 Jy/beam ! Clean residual mean=0.000005 rms=0.001384 Jy/beam ! Combined flux in latest and established models = 0.2182 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 162 components and 0.2182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058172Jy sigma=1.327416 ! Fit after self-cal, rms=0.058169Jy sigma=1.327396 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.66 mas, bmaj=7.371 mas, bpa=12.43 degrees ! Estimated noise=0.474772 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.66 x 7.371 at 12.43 degrees (North through East) ! Clean map min=-0.0041031 max=0.18305 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.788 mas, bmaj=6.517 mas, bpa=20.77 degrees ! Estimated noise=0.725536 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138704 Jy ! Component: 100 - total flux cleaned = 0.174043 Jy ! Component: 150 - total flux cleaned = 0.192054 Jy ! Component: 200 - total flux cleaned = 0.202481 Jy ! Total flux subtracted in 200 components = 0.202481 Jy ! Clean residual min=-0.006146 max=0.007280 Jy/beam ! Clean residual mean=0.000012 rms=0.001653 Jy/beam ! Combined flux in latest and established models = 0.202481 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.202481 Jy ! Inverting map and beam ! Estimated beam: bmin=4.66 mas, bmaj=7.371 mas, bpa=12.43 degrees ! Estimated noise=0.474772 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00786244 Jy ! Component: 100 - total flux cleaned = 0.0130047 Jy ! Component: 150 - total flux cleaned = 0.0152251 Jy ! Component: 200 - total flux cleaned = 0.0161311 Jy ! Total flux subtracted in 200 components = 0.0161311 Jy ! Clean residual min=-0.004080 max=0.005092 Jy/beam ! Clean residual mean=0.000004 rms=0.001187 Jy/beam ! Combined flux in latest and established models = 0.218612 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 51 components and 0.218612 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.904 mas, bmaj=9.629 mas, bpa=0.2243 degrees ! Estimated noise=0.544214 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000132538 Jy ! Component: 100 - total flux cleaned = 0.000416743 Jy ! Component: 150 - total flux cleaned = 0.000588224 Jy ! Component: 200 - total flux cleaned = 0.000589151 Jy ! Total flux subtracted in 200 components = 0.000589151 Jy ! Clean residual min=-0.004396 max=0.005884 Jy/beam ! Clean residual mean=0.000007 rms=0.001458 Jy/beam ! Combined flux in latest and established models = 0.219202 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.67929e-05 Jy ! Component: 100 - total flux cleaned = -0.000189054 Jy ! Component: 150 - total flux cleaned = -0.000243903 Jy ! Component: 200 - total flux cleaned = -0.000343992 Jy ! Total flux subtracted in 200 components = -0.000343992 Jy ! Clean residual min=-0.004369 max=0.005707 Jy/beam ! Clean residual mean=0.000007 rms=0.001423 Jy/beam ! Combined flux in latest and established models = 0.218858 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 80 components and 0.218858 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.66 mas, bmaj=7.371 mas, bpa=12.43 degrees ! Estimated noise=0.474772 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.75417e-05 Jy ! Component: 100 - total flux cleaned = 0.000514819 Jy ! Component: 150 - total flux cleaned = 0.000687391 Jy ! Component: 200 - total flux cleaned = 0.000791373 Jy ! Total flux subtracted in 200 components = 0.000791373 Jy ! Clean residual min=-0.003779 max=0.004341 Jy/beam ! Clean residual mean=0.000004 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.219649 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 96 components and 0.219649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058282Jy sigma=1.329601 ! Fit after self-cal, rms=0.058271Jy sigma=1.329325 wmodel /scr/pima/bg219b_uvs/J0709+3737_S_map.mod ! Writing 96 model components to file: /scr/pima/bg219b_uvs/J0709+3737_S_map.mod wobs /scr/pima/bg219b_uvs/J0709+3737_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219b_uvs/J0709+3737_S_uvs.fits wwins /scr/pima/bg219b_uvs/J0709+3737_S_map.win ! wwins: Wrote 3 windows to /scr/pima/bg219b_uvs/J0709+3737_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189966 Jy ! Component: 100 - total flux cleaned = 0.00327468 Jy ! Component: 150 - total flux cleaned = 0.00456083 Jy ! Component: 200 - total flux cleaned = 0.00570395 Jy ! Component: 250 - total flux cleaned = 0.00672754 Jy ! Component: 300 - total flux cleaned = 0.00753592 Jy ! Component: 350 - total flux cleaned = 0.00820372 Jy ! Component: 400 - total flux cleaned = 0.0090615 Jy ! Component: 450 - total flux cleaned = 0.0096312 Jy ! Component: 500 - total flux cleaned = 0.0100827 Jy ! Component: 550 - total flux cleaned = 0.0104729 Jy ! Component: 600 - total flux cleaned = 0.0108034 Jy ! Component: 650 - total flux cleaned = 0.0108498 Jy ! Component: 700 - total flux cleaned = 0.01103 Jy ! Component: 750 - total flux cleaned = 0.0110731 Jy ! Component: 800 - total flux cleaned = 0.0110726 Jy ! Component: 850 - total flux cleaned = 0.0110721 Jy ! Component: 900 - total flux cleaned = 0.0111117 Jy ! Component: 950 - total flux cleaned = 0.0109511 Jy ! Component: 1000 - total flux cleaned = 0.0109909 Jy ! Component: 1050 - total flux cleaned = 0.0110679 Jy ! Component: 1100 - total flux cleaned = 0.0111046 Jy ! Component: 1150 - total flux cleaned = 0.0111041 Jy ! Component: 1200 - total flux cleaned = 0.0111038 Jy ! Component: 1250 - total flux cleaned = 0.0110676 Jy ! Component: 1300 - total flux cleaned = 0.0110666 Jy ! Component: 1350 - total flux cleaned = 0.0109301 Jy ! Component: 1400 - total flux cleaned = 0.0108978 Jy ! Component: 1450 - total flux cleaned = 0.0108993 Jy ! Component: 1500 - total flux cleaned = 0.0109318 Jy ! Component: 1550 - total flux cleaned = 0.0108675 Jy ! Component: 1600 - total flux cleaned = 0.0108049 Jy ! Component: 1650 - total flux cleaned = 0.0107431 Jy ! Component: 1700 - total flux cleaned = 0.0106522 Jy ! Component: 1750 - total flux cleaned = 0.0106823 Jy ! Component: 1800 - total flux cleaned = 0.0105648 Jy ! Component: 1850 - total flux cleaned = 0.0105654 Jy ! Component: 1900 - total flux cleaned = 0.0105941 Jy ! Component: 1950 - total flux cleaned = 0.0105105 Jy ! Component: 2000 - total flux cleaned = 0.0106492 Jy ! Component: 2050 - total flux cleaned = 0.0106489 Jy ! Component: 2100 - total flux cleaned = 0.0107029 Jy ! Component: 2150 - total flux cleaned = 0.0106762 Jy ! Component: 2200 - total flux cleaned = 0.010728 Jy ! Component: 2250 - total flux cleaned = 0.0106757 Jy ! Component: 2300 - total flux cleaned = 0.0107776 Jy ! Component: 2350 - total flux cleaned = 0.0107268 Jy ! Component: 2400 - total flux cleaned = 0.010801 Jy ! Component: 2450 - total flux cleaned = 0.0107521 Jy ! Component: 2500 - total flux cleaned = 0.0107042 Jy ! Component: 2550 - total flux cleaned = 0.0106805 Jy ! Component: 2600 - total flux cleaned = 0.0107756 Jy ! Component: 2650 - total flux cleaned = 0.0107988 Jy ! Component: 2700 - total flux cleaned = 0.0107989 Jy ! Component: 2750 - total flux cleaned = 0.0108678 Jy ! Component: 2800 - total flux cleaned = 0.0109581 Jy ! Component: 2850 - total flux cleaned = 0.0109134 Jy ! Component: 2900 - total flux cleaned = 0.0109798 Jy ! Component: 2950 - total flux cleaned = 0.0109801 Jy ! Component: 3000 - total flux cleaned = 0.0109802 Jy ! Component: 3050 - total flux cleaned = 0.0109804 Jy ! Component: 3100 - total flux cleaned = 0.0110016 Jy ! Component: 3150 - total flux cleaned = 0.0109803 Jy ! Component: 3200 - total flux cleaned = 0.010918 Jy ! Component: 3250 - total flux cleaned = 0.011001 Jy ! Component: 3300 - total flux cleaned = 0.0109397 Jy ! Component: 3350 - total flux cleaned = 0.0109192 Jy ! Component: 3400 - total flux cleaned = 0.0109393 Jy ! Component: 3450 - total flux cleaned = 0.0109391 Jy ! Component: 3500 - total flux cleaned = 0.0109193 Jy ! Component: 3550 - total flux cleaned = 0.0109191 Jy ! Component: 3600 - total flux cleaned = 0.0108996 Jy ! Component: 3650 - total flux cleaned = 0.0107839 Jy ! Component: 3700 - total flux cleaned = 0.0108221 Jy ! Component: 3750 - total flux cleaned = 0.0108033 Jy ! Component: 3800 - total flux cleaned = 0.0107469 Jy ! Component: 3850 - total flux cleaned = 0.0107842 Jy ! Component: 3900 - total flux cleaned = 0.0107106 Jy ! Component: 3950 - total flux cleaned = 0.0108025 Jy ! Component: 4000 - total flux cleaned = 0.0107479 Jy ! Component: 4050 - total flux cleaned = 0.010784 Jy ! Total flux subtracted in 4096 components = 0.0107483 Jy ! Clean residual min=-0.001015 max=0.001057 Jy/beam ! Clean residual mean=0.000000 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.230397 Jy keep ! Adding 316 model components to the UV plane model. ! The established model now contains 412 components and 0.230397 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219b_uvs/J0709+3737_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.66 x 7.371 at 12.43 degrees (North through East) ! Clean map min=-0.0029195 max=0.18152 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219b_uvs/J0709+3737_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.181519 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00032661 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.539796 0.539796 1.07959 2.15918 4.31837 8.63673 17.2735 34.5469 69.0939 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.181 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 555.765 quit ! Quitting program ! Log file /scr/pima/bg219b_uvs/J0709+3737_S_uvs.log closed on Thu Apr 7 01:16:41 2016